The Relation between Mental Workload and Face Temperature in Flight Simulation

In this research, we study the relationship between mental workload and facial temperature of aircraft participants during a simulated takeoff flight. We conducted experiments to comprehend the correlation between work and facial temperature within the flight simulator. The experiment involved a group of 10 participants who played the role of pilots in a simulated A-320 flight. Six different flying scenarios were designed to simulate normal and emergency situations on airplane takeoff that would occur in different levels of mental workload for the participants. The measurements were workload assessment, face temperatures, and heart rate monitoring. Throughout the experiments, we collected a total of 120 instances of takeoffs, together with over 10 hours of time-series data including heart rate, workload, and face thermal images and temperatures. Comparative analysis of EEG data and thermal image types, revealed intriguing findings. The results indicate a notable inverse relationship between workload and facial muscle temperatures, as well as facial landmark points. The results of this study contribute to a deeper understanding of the physiological effects of workload, as well as practical implications for aviation safety and performance.

Adaptive Sliding Control of Six-DOF Flight Simulator Motion Platform

There is proposed an adaptive sliding controller in task space on the base of the linear Newton-Euler dynamic equation of motion platform in a six-DOF flight simulator. The uncertain parameters are divided into two groups： the constant and the time-varying. The controller identifies constant uncertain parameters using nonlinear adaptive controller associated with elimination of the influences of time-varying uncertain parameters and compensation of the external disturbance using sliding control. The results of numerical simulation attest to the capability of this control scheme not only to, with deadly accuracy, identify parameters of motion platform such as load, inertia moments and mass center, but also effectively improve the robustness of the system.

Realization of nonlinear PID with feed-forward controller for 3-DOF flight simulator and hardware-in-the-loop simulation

As friction, intrinsic steady-state nonlinearity poses a challenging dilemma to the control system of 3-DOF （three degree of freedom） flight simulator, a novel hybrid control strategy of nonlinear PID （proportionalintegral-derivative） with additional FFC （feed-forward controller） is proposed, and the hardware-in-the-loop simulation results are also given. Based on the description of 3-DOF flight simulator, a novel nonlinear PID theory is well introduced. Then a nonlinear PID controller with additional FFC is designed. Subsequently, the loop structure of 3-DOF flight simulator is also designed. Finally, a series of hardware-in-the-loop simulation experiments are undertaken to verify the feasibility and effectiveness of the proposed nonlinear PID controller with additional FFC for 3-DOF flight simulator.

Design and Analysis for a Three-Rotational-DOF Flight Simulator of Fighter-Aircraft

Most of researchers focused on traditional six degrees of freedom(DOF) Stewart flight simulator,which can not be adaptive in fighter?aircraft flight simulator. A three rotational DOF flight simulator of fighter?aircraft based on dou?ble parallel manipulator and hybrid structure is presented. The flight simulator is composed of two identical 3?RRS(revolute?revolute?spherical) spherical parallel manipulators and one cabin,called Twins. The cabin has an additional independent DOF for 360° continuous rotation,so it can be applied as a flight simulator for a fighter?aircraft to achieve spin maneuvering. Because of the introduction of the hybrid structure and double parallel manipulator of themechanism,the redundancy exists with respect to both kinematics and actuation. Kinematics is carried out and Jaco?bian matrix is established by means of screw theory. The inverse kinematics is given out by the analytical method. 64 groups inverse solutions are showed in a table by permutation. Forward kinematics is solved by an e ectively numeri?cal method. The forward numerical method is realized based on the analytically inverse kinematics and Jacobian matrix. The numerical examples show that the forward numerical method can be used in real?time control. The rollingmotion is considered in forward kinematics and a numerical example is given out. The proposed flight simulator can spin and there are three rotational DOF with a hybrid structure so that the novel flight simulator can be used in the field of the fighter?aircraft for pilots to train.

Sliding Mode Controller Design for Position and Speed Control of Flight Simulator Servo System with Large Friction

Flight simulator is an important device and a typical high-performance position and speed servo system used in the hardware-in-the-loop simulation of flight control system. Friction is the main nonlinear resistance in the flight simulator servo system, especially in a low-speed state. Based on the description of dynamic and static models of a nonlinear Stribeck friction model, this paper puts forward sliding mode controller to overcome the friction, whose stability is

FUZZY GLOBAL SLIDING MODE CONTROL BASED ON GENETIC ALGORITHM AND ITS APPLICATION FOR FLIGHT SIMULATOR SERVO SYSTEM

To alleviate the chattering problem, a new type of fuzzy global sliding mode controller （FGSMC） is presented. In this controller, the switching gain is estimated by fuzzy logic system based on the reachable conditions of sliding mode controller（SMC）, and genetic algorithm （GA） is used to optimize scaling factor of the switching gain, thus the switch chattering of SMC can be alleviated. Moreover, global sliding mode is realized by designing an exponential dynamic sliding surface. Simulation and real-time application for flight simulator servo system with Lugre friction are given to indicate that the proposed controller can guarantee high robust performance all the time and can alleviate chattering phenomenon effectively.

QFT control based on zero phase error compensation for flight simulator

To improve the robustness of high-precision servo systems, quantitative feedback theory （QFT） which aims to achieve a desired robust design over a specified region of plant uncertainty is proposed. The robust design problem can be solved using QFT but it fails to guarantee a high precision tracking. This problem is solved by a robust digital QFT control scheme based on zero phase error （ZPE） feed forward compensation. This scheme consists of two parts： a QFT controller in the closed-loop system and a ZPE feed-forward compensator. Digital QFT controller is designed to overcome the uncertainties in the system. Digital ZPE feed forward controller is used to improve the tracking precision. Simulation and real-time examples for flight simulator servo system indicate that this control scheme can guarantee both high robust performance and high position tracking precision.

ZERO PHASE ERROR REAL TIME CONTROL FOR FLIGHT SIMULATOR SERVO SYSTEM

Flight simulator is an important device and a typical high performanceposition servo system used in the hardware-in-the-loop simulation of flight control system. Withoutusing the future desired output, zero phase error controller makes the overall system's frequencyresponse exhibit zero phase shift for all frequencies and a very small gain error at low frequencyrange can be achieved. A new algorithm to design the feed forward controller is presented, in orderto reduce the phase error, the design of proposed feed forward controller uses a modified plantmodel, which is a closed loop transfer function, through which the system tracking precisionperformance can be improved greatly. Real-time control results show the effectiveness of theproposed approach in flight simulator servo system.

Dynamic flight stability of hovering model insects:theory versus simulation using equations of motion coupled with Navier-Stokes equations

In the present paper, the longitudinal dynamic flight stability properties of two model insects are predicted by an approximate theory and computed by numerical sim- ulation. The theory is based on the averaged model （which assumes that the frequency of wingbeat is sufficiently higher than that of the body motion, so that the flapping wings＇ degrees of freedom relative to the body can be dropped and the wings can be replaced by wingbeat-cycle-average forces and moments）; the simulation solves the complete equations of motion coupled with the Navier-Stokes equations. Comparison between the theory and the simulation provides a test to the validity of the assumptions in the theory. One of the insects is a model dronefly which has relatively high wingbeat frequency （164 Hz） and the other is a model hawkmoth which has relatively low wingbeat frequency （26 Hz）. The results show that the averaged model is valid for the hawkmoth as well as for the dronefly. Since the wingbeat frequency of the hawkmoth is relatively low （the characteristic times of the natural modes of motion of the body divided by wingbeat period are relatively large） compared with many other insects, that the theory based on the averaged model is valid for the hawkmoth means that it could be valid for many insects.

Forward flight of a model butterfly: Simulation by equations of motion coupled with the Navier-Stokes equations

The forward flight of a model butterfly was stud- ied by simulation using the equations of motion coupled with the Navier-Stokes equations. The model butterfly moved under the action of aerodynamic and gravitational forces, where the aerodynamic forces were generated by flapping wings which moved with the body, allowing the body os- cillations of the model butterfly to be simulated. The main results are as follows： （1） The aerodynamic force produced by the wings is approximately perpendicular to the long-axis of body and is much larger in the downstroke than in the up- stroke. In the downstroke the body pitch angle is small and the large aerodynamic force points up and slightly backward, giving the weight-supporting vertical force and a small neg- ative horizontal force, whilst in the upstroke, the body an- gle is large and the relatively small aerodynamic force points forward and slightly downward, giving a positive horizon- tal force which overcomes the body drag and the negative horizontal force generated in the downstroke. （2） Pitching oscillation of the butterfly body plays an equivalent role of the wing-rotation of many other insects. （3） The body-mass- specific power of the model butterfly is 33.3 W/kg, not very different from that of many other insects, e.g., fruitflies and dragonflies.

Underconstrained Cable-Driven Parallel Suspension System of Virtual Flight Test Model in Wind Tunnel

An underconstrained cable-driven parallel robot(CDPR)suspension system was designed for a virtual flight testing(VFT)model.This mechanism includes two identical upper and lower kinematic chains,each of which comprises a cylindrical pair,rotating pair,and cable parallelogram.The model is pulled via two cables at the top and bottom and fixed by a yaw turntable,which can realize free coupling and decoupling with three rotational degrees of freedom of the model.First,the underconstrained CDPR suspension system of the VFT model was designed according to the mechanics theory,the degrees of freedom were verified,and the support platform was optimized to realize the coincidence between the model’s center of mass and the rotation center of the mechanism during the motion to ensure the stability of the support system.Finally,kinematic and dynamical modeling of the underconstrained CDPR suspension system was conducted;the system stiffness and stability criteria were deduced.Thus,the modeling of an underconstrained,reconfigurable,passively driven CDPR was understood comprehensively.Furthermore,dynamic simulations and experiments were used to verify that the proposed system meets the support requirements of the wind tunnel-based VFT model.This study serves as the foundation for subsequent wind tunnel test research on identifying the aerodynamic parameters of aircraft models,and also provides new avenues for the development of novel support methods for thewind tunnel testmodel.

A Potential Flow Based Flight Simulator for an Underwater Glider

Underwater gliders are recent innovative types of autonomous underwater vehicles （AUVs） used in ocean exploration and observation. They adjust their buoyancy to dive and to return to the ocean surface. During the change of altitude, they use the hydrodynamic forces developed by their wings to move forward. Their flights are controlled by changing the position of their centers of gravity and their buoyancy to adjust their trim and heel angles. For better flight control, the understanding of the hydrodynamic behavior and the flight mechanics of the underwater glider is necessary. A 6-DOF motion simulator is coupled with an unsteady potential flow model for this purpose. In some specific cases, the numerical study demonstrates that an inappropriate stabilizer dimension can cause counter-steering behavior. The simulator can be used to improve the automatic flight control. It can also be used for the hydrodynamic design optimization of the devices.

基于ANFIS-IPD的飞行模拟器座椅舒适度评价模型

为提升现有飞行模拟器座椅舒适度,减轻驾驶员长时间训练的疲劳感,基于自适应神经模糊推理系统(Adaptive Network-based Fuzzy Inference System,ANFIS)和理想压力分布(Ideal Pressure Distribution,IPD)构建一种飞行模拟器座椅舒适度评价模型。通过座椅压力分布采集系统获取压力分布数据,采用IPD将所得数据归一化作为模型输入数据,同时收集受试人员主观评分作为模型输出数据。采用非均匀有理B样条曲线(Non-Uniform Rational B-Splines,NURBS)对座椅进行改进设计,将处理后的试验数据通过ANFIS工具训练模型进行验证,并用评价模型评估设计方案及优越性。结果表明:该评价模型对飞行模拟器座椅舒适度有较好的预测能力,为提升飞行模拟器座椅舒适度提供指导和参考。

Design and simulation of time-of-flight neutron reflectometer

In this paper,a time of flight neutron reflectometer model is proposed.According to the original objective inputting physical parameters and expectations,computer simulation was done by McStas package.With the open slit, neutron flux at sample position was about 1×10~5 n·cm^(-2)·S^(-1),and the optimal resolution could reach 0.5%.The results show that the model has a good performance.The design of this model can be an instruction for neutron reflectometer construction or project analysis in the future.

Practical Survey on Design and Testing of Flight Control Laws for Helicopter Engineering Simulators

A practical survey on engineering implementation of flight control laws on helicopter engineering simulators is proposed.Advances of helicopter engineering simulators are introduced.Practical flight control technologies are reviewed,with an emphasis on discussing the corresponding engineering simulation programs.Finally,the difficulties of implementing advanced control technologies are addressed,and the future development of helicopter engineering simulators are highlighted.

Zero phase error control based on neural compensation for flight simulator servo system

Using the future desired input value, zero phase error controller enables the overall system＇s frequency response exhibit zero phase shift for all frequencies and a small gain error at low frequency range, and based on this, a new algorithm is presented to design the feedforward controller. However, zero phase error controller is only suitable for certain linear system. To reduce the tracking error and improve robustness, the design of the proposed feedforward controller uses a neural compensation based on diagonal recurrent neural network. Simulation and real-time control results for flight simulator servo system show the effectiveness of the proposed approach.

Modeling and software implementation of flight system for simulator of a new fighter

Real-time modeling and simulation of flight system are the key parts of simulator. After describing the architecture of simulator for a newer fighter, author presents the composition of flight system and its mathematic models. In this paper, aircraft is regarded as an elastic flight body. And a new integrated algorithm which can remedy the shortcoming of Euler method and four-element method is used to calculate the Eulerian angles of aircraft. Finally, the software implementation of the flight system is given in the paper.

Development of Multi-Purpose, Variable, Light Aircraft Simulator

Most aircraft simulators are manufactured separately for each model because the structure and flight characteristic of each model is different. However, light aircrafts are somewhat similar in terms of form and structure. In addition, from the flight schools’ point of view, it is not economically beneficial to purchase and maintain light aircraft simulators for each different aircraft type. Globally, there are four types of light aircraft models that are most widely used for basic flight training. If all four models are separately selectable within a single flight simulator, there will be a lot of economic benefits in terms of reducing the purchasing costs as well as the reduction of pilot training costs. In this regard, this study aims at developing the multi-purpose variable-type simulator technology so that it can train four different aircraft types using only a single simulator. The utility of simulator is divided into the use of flight training and the use of leisure time. The flight characteristics are analyzed for each model type to emulate the actual aircraft. It is anticipated that the developed simulator can be produced at a lower cost while occupying less floor space and using less electric energy than the previous one.

Numerical Modeling of a New Flight Simulator Enabling Continuous 360⁃Degree Spinning and Translational Motion

This paper presents a new nine⁃degree⁃of⁃freedom parallel mechanism,which can be applied as a flight simulator.The mechanism is composed by Stewart turntable and another three⁃axis turntable.The Stewart platform can realize six⁃degree⁃of⁃freedom movement in space,but the working space is limited.After the three⁃axis turntable is installed,the rotation space can be increased to simulate more realistic flight conditions.This paper analyzes the new flight simulator from kinematics and dynamics aspects.In addition,the flight simulator is simulated and analyzed based on the MATLAB/Simulink simulation system.The results obtained from the numerical simulations is planned to be used for the practical manufacturing and applications of the new platform.

Comparison between Google Earth KML Data and RTK Data on a Flight Planning Simulated to the Unmanned Aerial Vehicle Microdrone MD4-1000

The UAVs （unmanned aerial vehicles） and the use of graphical data files of extension KML （keyhole markup language） have become popular nowadays. The KML files are associated to the Google Earth applications. Developed by Microdrone company for planning, overflight simulation and data flight analysis, the program mdCockpit was used in this experiment. The UAV Microdrone＇s flight path was programmed in two ways： using geo referenced images from Google Earth and entering points coordinates into the program. These points have had their geographical decimal coordinates collected by GPS （global positioning system） （RTK （real time kinematic）） method. The aim here is to describe a way of evaluating the difference between the alternatives of flight planning. A flight path, defined a route with 22 points, was also simulated in the program mdCockpit. The points were collected and saved, while the images captured by the program went automatically forming a georeferenced mosaic. A comparison between the differences of coordinates to each point was made by choosing on the images and also by a RTK positioning. The result was up to 14.20 m to a 100 m flight height. There is a significant change of position and this can result in unwanted over flights in locations or even jeopardizing the safety of air activity.