Integration of a fused silica capillary and in-situ Raman spectroscopy for investigating CO_(2) solubility in n-dodecane at near-critical and supercritical conditions of CO_(2)

To determine the solubility of CO_(2)in n-dodecane at T=303.15-353.15 K,P≤11.00 MPa,an integrated fused silica capillary and in-situ Raman spectroscopy system was built.The Raman peak intensity ratio(I_(CO_(2))/IC-H)between the upper band of CO_(2)Fermi diad(I_(CO_(2)))and the C-H stretching band of n-dodecane(IC-H)was employed to determine the solubility of CO_(2)in n-dodecane based on the calibrated correlation equation between the known CO_(2)molality in n-dodecane and the I_(CO_(2))/IC-Hratio with R^(2)=0.9998.The results indicated that the solubility of CO_(2)decreased with increasing temperature and increased with increasing pressure.The maximum CO_(2)molality(30.7314 mol/kg)was obtained at 303.15 K and7.00 MPa.Finally,a solubility prediction model(lnS=(P-A)/B)based on the relationship with temperature(T in K)and pressure(P in MPa)was developed,where S is CO_(2)molality,A=-8×10^(-6)T^(2)+0.0354T-8.1605,and B=0.0405T-10.756.The results indicated that the solubilities of CO_(2)derived from this model were in good agreement with the experimental data.

In situ infrared, Raman and X-ray spectroscopy for the mechanistic understanding of hydrogen evolution reaction

Hydrogen production by water reduction reactions has received considerable attention because hydrogen is considered a clean-energy carrier,key for a sustainable energy future.Computational methods have been widely used to study the reaction mechanism of the hydrogen evolution reaction(HER),but the calculation results need to be supported by experimental results and direct evidence to confirm the mechanistic insights.In this review,we discuss the fundamental principles of the in situ spectroscopic strategy and a theoretical model for a mechanistic understanding of the HER.In addition,we investigate recent studies by in situ Fourier transform infrared(FTIR),Raman spectroscopy,and X-ray absorption spectroscopy(XAS) and cover new findings that occur at the catalyst-electrolyte interface during HER.These spectroscopic strategies provide practical ways to elucidate catalyst phase,reaction intermediate,catalyst-electrolyte interface,intermediate binding energy,metal valency state,and coordination environment during HER.

Rapid analysis of Chinese steamed bread staling using Raman Spectroscopy

Staling is an important issue that Chinese steamed bread(CSB)may encounter during storage,which significantly affects their taste,flavor,and nutritional value.The monitoring technology for rapid aging is particularly important to effectively control the aging process of CSB,reduce quality deterioration,and promote the industrial production of CSB.Raman spectroscopy has been widely used in the study of food structure and properties due to its non-destructive and high-sensitivity characteristics,particularly demonstrating unique advantages in the analysis of starch structure.This study explored the possibility of analyzing the staling of CSB using Raman spectroscopy based on hardness and moisture content.Analysis of the correlation between the hardness of CSB and the full width at half maximum(FWHM)at 480 cm^(−1)during storage was conducted,and a significant positive correlation between them was found,with R^(2)above 0.8.Besides,nine characteristic peaks of CSB samples related to starch were selected for analysis.As the moisture content of CSB decreased,the peak intensities and areas of showed an upward trend during storage,with the best correlation coefficient above 0.8 revealed by linear regression analysis.Therefore,Raman spectra could be used as a potential method for the fast prediction of CSB staling.

基于Raman光谱的3,5-二氨基-1,2,4-三唑(DAT)合成反应在线监测与反应机理探究——推荐一个仪器分析综合实验

本实验介绍了一个仪器分析综合性实验——基于Raman光谱的3,5-二氨基-1,2,4-三唑(DAT)合成的在线监测与反应机理探究。该实验是一个科研转化的仪器分析综合实验,内容包括DAT的合成、基于Raman光谱的合成反应过程在线监测以及合成反应机理解析。在实验中,采用化学计量学方法对Raman光谱数据进行处理和分析,以更深入地理解合成反应的机理。通过本实验,可以巩固学生的化学专业知识,提高学生的综合实验操作技能,激发学生对科学研究的兴趣,培养学生的科研探究能力。

基于Raman的复方柳安咖注射液主要成分分析

本文应用拉曼光谱技术对复方柳安咖注射液的主要成分及含量进行了分析。首先测试分析了62个复方柳安咖注射液样品的拉曼光谱,结果表明62个注射液样品的拉曼光谱主要由水杨酸钠、安替比林和咖啡因的水溶液拉曼谱带组成;进一步利用密度泛函理论(DFT)计算了其主要成分的理论拉曼光谱和红外光谱,与实验测定的固体粉末光谱和溶液光谱进行比较分析,进而对复方柳安咖注射液拉曼光谱谱峰的振动模式进行了归属;最后利用水杨酸钠和安替比林浓度梯度溶液拉曼光谱特征峰的峰高和峰面积,分别建立定量分析模型,对62个复方柳安咖注射液样品中主要成分水杨酸钠和安替比林的含量进行预测,并与液相色谱法测试值进行了对比,结果显示预测值与液相色谱法测试值相近,得到了较好的主要成分含量预测结果。研究结果可为复方柳安咖注射液药剂的生产、药品质量的监控、药品光谱分析研究等方面提供参考。

Recent advances in Raman spectroscopy for skin diagnosis

The skin is the largest organ in humans.It comprises about 16%of our body.Many diseases originate from the skin,including acne vulgaris,skin cancer,fungal skin disease,etc.As a common skin cancer in China,melanoma alone grows at year rate of nearly 4%.Therefore,it is crucial to develop an objective,reliable,accurate,non-invasive,and easy-to-use diagnostic method for skin diseases to support clinical decision-making.Raman spectroscopy is a highly specic imaging technique,which is sensitive,even to the single-cell level in skin diagnosis.Raman spectroscopy provides a pattern of signals with narrow bandwidths,making it a common and essential tool for researching individual characteristics of skin cells.Raman spectroscopy already has a number of clinical applications,including in thyroid,cervical and colorectal cancer.This review will introduce the advantages and recent developments in Raman spectroscopy,before focusing on the advances in skin diagnosis,including the advantages,methods,results,analysis,and notications.Finally,we discuss the current limitations and future progress of Raman spectroscopy in the context of skin diagnosis.

Quantification of radiation damage in natural and synthetic zircon by Raman spectroscopy:application to low-temperature thermochronology

Due to its ubiquitous occurrence in igneous,metamorphic,and sedimentary rocks and its wide application in geochronology and geochemistry,zircon has become the most widely used accessory mineral in the geological community.Nevertheless,the decay of U and Th causes radiation damage to the zircon structure,resulting in various degrees of metamictization,which can affect the accuracy of U–Pb dates and Hf and O isotope results.If the degree of zircon radiation damage can be quantified,the influence on geochemical analyses can be evaluated,and the results can be corrected more precisely.In this paper,synthetic and natural zircon crystals with different crystallization ages were selected for Raman spectroscopy analysis,cathodoluminescence imaging,and determination of the U and Th concentrations.The results show that Raman FWHM(full width at half bandmaximum)and Raman shift correlate with alpha dose(Da)ofzirconsfollowingtheseequations,FWHM=44.36(±2.32)×[1-exp(-2.74×Da)]-+1.7(±0.19),Raman Shift=-6.53×Da+1007.69.Analysis of synthetic zircon crystals shows that doped REEs(rare earth elements and P)can also lead to an increase in the FWHM.However,this effect can be ignored for natural zircon samples with REE contents at a normal level of hundreds to a few thousand ppm.The FWHM and Raman shift can be used as proxies to measure the degree of zircon radiation damage.Using the updated equations to calculate the latest age when zircon began to accumulate radiation damage,a more accurate and more meaningful“radiation damage age”can be obtained.

A New Method for In-Situ Measurement of Internal Solitary Waves Based on the Stimulated Raman Scattering in Optical Fibers

In-situ measurement of internal solitary waves(ISWs)is complicated in the ocean due to their randomness.At present,the ISWs are mainly detected by the chain structure of conductivity-temperature-depth systems(CTDs)or temperature sensors.The high cost limits the spatial resolution,which ultimately affects the measuring accuracy of the ISW amplitude.In this paper,we developed an experimental measurement system for detecting ISWs based on the stimulated Raman scattering in distributed optical fibers.This system has the advantages of high precision,low cost,and easy operation.The experimental results show that the system is consistent with CTDs in the measurement of vertical ocean temperature variation.The spatial resolution of the system can reach 1.0 m and the measuring accuracy of temperature is 0.2℃.We successfully detected 3 ISWs by the system in the South China Sea and two optical remote sensing images collected on May 18,2021,the same day of two detected ISWs,verify the occurrence of the measured ISWs.We used the image pairs method to calculate the phase velocity of ISW and the result is 1.71 ms^(-1).By extracting the distances between wave packets,it can be found that the semi-diurnal tide generates the detected ISWs.The impact of the tidal current velocity on the ISW in amplitude is undeniable.Undoubtedly,the system has a great application prospect for detecting ISWs and other dynamic phenomena in the ocean.

Determination of esophageal squamous cell carcinoma and gastric adenocarcinoma on raw tissue using Raman spectroscopy

BACKGROUND Cancer detection is a global research focus,and novel,rapid,and label-free techniques are being developed for routine clinical practice.This has led to the development of new tools and techniques from the bench side to routine clinical practice.In this study,we present a method that uses Raman spectroscopy(RS)to detect cancer in unstained formalin-fixed,resected specimens of the esophagus and stomach.Our method can record a clear Raman-scattered light spectrum in these specimens,confirming that the Raman-scattered light spectrum changes because of the histological differences in the mucosal tissue.AIM To evaluate the use of Raman-scattered light spectrum for detecting endoscopically resected specimens of esophageal squamous cell carcinoma(SCC)and gastric adenocarcinoma(AC).METHODS We created a Raman device that is suitable for observing living tissues,and attempted to acquire Raman-scattered light spectra in endoscopically resected specimens of six esophageal tissues and 12 gastric tissues.We evaluated formalin-fixed tissues using this technique and captured shifts at multiple locations based on feasibility,ranging from six to 19 locations 200 microns apart in the vertical and horizontal directions.Furthermore,a correlation between the obtained Raman scattered light spectra and histopathological diagnosis was performed.RESULTS We successfully obtained Raman scattered light spectra from all six esophageal and 12 gastric specimens.After data capture,the tissue specimens were sent for histopathological analysis for further processing because RS is a label-free methodology that does not cause tissue destruction or alterations.Based on data analysis of molecular-level substrates,we established cut-off values for the diagnosis of esophageal SCC and gastric AC.By analyzing specific Raman shifts,we developed an algorithm to identify the range of esophageal SCC and gastric AC with an accuracy close to that of histopathological diagnoses.CONCLUSION Our technique provides qualitative information for real-time morphological diagnosis.However,further in vivo evaluations require an excitation light source with low human toxicity and large amounts of data for validation.

Reconstructing in vivo spatially offset Raman spectroscopy of human skin tissue using a GPU-accelerated Monte Carlo platform

As one type of spatially offset Raman spectroscopy(SORS), inverse SORS is particularly suited to in vivo biomedical measurements due to its ring-shaped illumination scheme. To explain inhomogeneous Raman scattering during in vivo inverse SORS measurements, the light–tissue interactions when excitation and regenerated Raman photons propagate in skin tissue were studied using Monte Carlo simulation. An eight-layered skin model was first built based on the latest transmission parameters. Then, an open-source platform, Monte Carlo e Xtreme(MCX), was adapted to study the distribution of 785 nm excitation photons inside the model with an inverse spatially shifted annular beam. The excitation photons were converted to emission photons by an inverse distribution method based on excitation flux with spatial offsets Δs of 1 mm, 2 mm, 3 mm and 5 mm. The intrinsic Raman spectra from separated skin layers were measured by continuous linear scanning to improve the simulation accuracy. The obtained results explain why the spectral detection depth gradually increases with increasing spatial offset, and address how the intrinsic Raman spectrum from deep skin layers is distorted by the reabsorption and scattering of the superficial tissue constituents. Meanwhile, it is demonstrated that the spectral contribution from subcutaneous fat will be improved when the offset increases to 5 mm, and the highest detection efficiency for dermal layer spectral detection could be achieved when Δs = 2 mm. Reasonably good matching between the calculated spectrum and the measured in vivo inverse SORS was achieved, thus demonstrating great utility of our modeling method and an approach to help understand the clinical measurements.

Accurate quantification of TiO_(2)(B)'s phase purity via Raman spectroscopy

Bronze phase titanium dioxide(TiO_(2)(B))could be a promising high-power anode for lithium ion battery.However,TiO_(2)(B)is a metastable material,so the as-synthesized samples are inevitably accompanied by the existence of anatase phases.It has been found that the TiO_(2)(B)'s purity is positively correlated with its electrochemical performance.Herein,we have established an accurate quantification of the TiO_(2)(B)/anatase ratio,by figuring out the function between the purity of TiO_(2)(B)phase in the high purity range and its Raman spectra features in combination of the calibration by the synchrotron radiation X-ray diffraction(XRD).Compared with the time-consuming electrochemical method,the rapid,sensitive and non-destructive features of Raman spectroscopy have made it a promising candidate for determining the purity of TiO_(2)(B).Further,the correlations developed in this work should be instructive in synthesizing pure TiO_(2)(B)and furthermore optimizing its electrochemical charge storage properties.

Unveiling localized electronic properties of ReS2 thin layers at nanoscale using Kelvin force probe microscopy combined with tip-enhanced Raman spectroscopy

Electronic properties of two-dimensional(2D) materials can be strongly modulated by localized strain. The typical spatial resolution of conventional Kelvin probe force microscopy(KPFM) is usually limited in a few hundreds of nanometers, and it is difficult to characterize localized electronic properties of 2D materials at nanoscales. Herein, tip-enhanced Raman spectroscopy(TERS) is proposed to combine with KPFM to break this restriction. TERS scan is conducted on ReS2bubbles deposited on a rough Au thin film to obtain strain distribution by using the Raman peak shift. The localized contact potential difference(CPD) is inversely calculated with a higher spatial resolution by using strain measured by TERS and CPD-strain working curve obtained using conventional KPFM and atomic force microscopy. This method enhances the spatial resolution of CPD measurements and can be potentially used to characterize localized electronic properties of 2D materials.

Vibrational Spectroscopy of Pain Relievers: Traditional and Remote Raman Techniques

The application of vibrational spectroscopy in the pharmaceutical industry is widely investigated, from the quality assurance of the product during the production process control to the final products’ quality control and the authentication of products on the markets. This study focuses on non-contact and noninvasive detection and identification of pain-relievers at 1-5 meters standoff distances. The specimens analyzed include standard laboratory-grade active ingredients and commercially available pain relievers in powder, solid and liquid forms. All the remote measurements captured revealed the Raman signatures of the specimens, with varying peak intensities. To correlate the band intensities captured with the standoff distances between the laser source and the specimens, the intensity ratios of the two prominent peaks of the laboratory grade reference active ingredient (1607 and 1319 cm-1) normalized with 1319 cm-1 are used. The results of the study suggest the viability of standoff Raman spectroscopy for routine monitoring and identification of pharma-ceuticals, including counterfeit pain relievers.

A core-satellite self-assembled SERS aptasensor containing a“biological-silent region”Raman tag for the accurate and ultrasensitive detection of histamine

Herein,a novel interference-free surface-enhanced Raman spectroscopy(SERS)strategy based on magnetic nanoparticles(MNPs)and aptamer-driven assemblies was proposed for the ultrasensitive detection of histamine.A core-satellite SERS aptasensor was constructed by combining aptamer-decorated Fe_(3)O_(4)@Au MNPs(as the recognize probe for histamine)and complementary DNA-modified silver nanoparticles carrying 4-mercaptobenzonitrile(4-MBN)(Ag@4-MBN@Ag-c-DNA)as the SERS signal probe for the indirect detection of histamine.Under an applied magnetic field in the absence of histamine,the assembly gave an intense Raman signal at“Raman biological-silent”region due to 4-MBN.In the presence of histamine,the Ag@4-MBN@Ag-c-DNA SERS-tag was released from the Fe_(3)O_(4)@Au MNPs,thus decreasing the SERS signal.Under optimal conditions,an ultra-low limit of detection of 0.65×10^(-3)ng/mL and a linear range 10^(-2)-10^5 ng/mL on the SERS aptasensor were obtained.The histamine content in four food samples were analyzed using the SERS aptasensor,with the results consistent with those determined by high performance liquid chromatography.The present work highlights the merits of indirect strategies for the ultrasensitive and highly selective SERS detection of small biological molecules in complex matrices.

Real-time model correction using Kalman filter for Raman-controlled cell culture processes

Raman spectroscopy has found extensive use in monitoring and controlling cell culture processes.In this context,the prediction accuracy of Raman-based models is of paramount importance.However,models established with data from manually fed-batch cultures often exhibit poor performance in Raman-controlled cultures.Thus,there is a need for effective methods to rectify these models.The objective of this paper is to investigate the efficacy of Kalman filter(KF)algorithm in correcting Raman-based models during cell culture.Initially,partial least squares(PLS)models for different components were constructed using data from manually fed-batch cultures,and the predictive performance of these models was compared.Subsequently,various correction methods including the PLS-KF-KF method proposed in this study were employed to refine the PLS models.Finally,a case study involving the auto-control of glucose concentration demonstrated the application of optimal model correction method.The results indicated that the original PLS models exhibited differential performance between manually fed-batch cultures and Raman-controlled cultures.For glucose,the root mean square error of prediction(RMSEP)of manually fed-batch culture and Raman-controlled culture was 0.23 and 0.40 g·L^(-1).With the implementation of model correction methods,there was a significant improvement in model performance within Raman-controlled cultures.The RMSEP for glucose from updating-PLS,KF-PLS,and PLS-KF-KF was 0.38,0.36 and 0.17 g·L^(-1),respectively.Notably,the proposed PLS-KF-KF model correction method was found to be more effective and stable,playing a vital role in the automated nutrient feeding of cell cultures.

Facile electrochemical surface-alloying and etching of Au wires to enable high-performance substrates for surface enhanced Raman scattering

Surface-enhanced Raman Spectroscopy(SERS)is a nondestructive technique for rapid detection of analytes even at the single-molecule level.However,highly sensitive and reliable SERS substrates are mostly fabricated with complex nanofabrication techniques,greatly restricting their practical applications.A convenient electrochemical method for transforming the surface of commercial gold wires/foils into silver-alloyed nanostructures is demonstrated in this report.Au substrates are treated with repetitive anodic and cathodic bias in an electrolyte of thiourea,in a one-pot one-step manner.X-rays absorption fine structure(XAFS)spectroscopy confirms that the AuAg alloy is induced at the surface.The unique AuAg alloyed surface nanostructures are particularly advantageous when served as SERS substrates,enabling a remarkably sensitive detection of Rhodamine B(a detection limit of 10^(-14)M,and uniform strong response throughout the substrates at 10^(-12)M).

IN-SITU TIME-RESOLVED RAMAN SPECTROSCOPIC STUDIES OF SILVER ELECTRODE IN NaSCN SOLUTION

In-situ time-resolved Raman spectroscopy(TRRS)has been applied on studies of electrochemical adsorption of thiocyanate at silver electrode during potential cycles and potential step.It is shown that some dynamic information about the adsorption and desorption processes can be obtained.

In situ Raman spectroscopic quantification of CH4–CO2 mixture: application to fluid inclusions hosted in quartz veins from the Longmaxi Formation shales in Sichuan Basin, southwestern China

We re-evaluate the Raman spectroscopic quantification of the molar ratio and pressure for CH4–CO2 mixtures.Firstly,the Raman quantification factors of CH4 and CO2 increase with rising pressure at room temperature,indicating that Raman quantification of CH4/CO2 molar ratio can be applied to those fluid inclusions(FIs)with high internal pressure(i.e.,>15 MPa).Secondly,the v1(CH4)peak position shifts to lower wavenumber with increasing pressure at constant temperature,confirming that the v1(CH4)peak position can be used to calculate the fluid pressure.However,this method should be carefully calibrated before applying to FI analyses because large discrepancies exist among the reported v1(CH4)-P curves,especially in the highpressure range.These calibrations are applied to CH4-rich FIs in quartz veins of the Silurian Longmaxi black shales in southern Sichuan Basin.The vapor phases of these FIs are mainly composed of CH4 and minor CO2,with CO2 molar fractions from4.4%to 7.4%.The pressure of single-phase gas FI ranges from 103.65 to 128.35 MPa at room temperature,which is higher than previously reported.Thermodynamic calculations supported the presence of extremely high-pressure CH4-saturated fluid(218.03–256.82 MPa at 200°C),which may be responsible for the expulsion of CH4 to adjacent reservoirs.

Different angle-resolved polarization configurations of Raman spectroscopy: A case on the basal and edge plane of two-dimensional materials

Angle-resolved polarized Raman（ARPR） spectroscopy can be utilized to assign the Raman modes based on crystal symmetry and Raman selection rules and also to characterize the crystallographic orientation of anisotropic materials.However, polarized Raman measurements can be implemented by several different configurations and thus lead to different results. In this work, we systematically analyze three typical polarization configurations： 1） to change the polarization of the incident laser, 2） to rotate the sample, and 3） to set a half-wave plate in the common optical path of incident laser and scattered Raman signal to simultaneously vary their polarization directions. We provide a general approach of polarization analysis on the Raman intensity under the three polarization configurations and demonstrate that the latter two cases are equivalent to each other. Because the basal plane of highly ordered pyrolytic graphite（HOPG） exhibits isotropic feature and its edge plane is highly anisotropic, HOPG can be treated as a modelling system to study ARPR spectroscopy of twodimensional materials on their basal and edge planes. Therefore, we verify the ARPR behaviors of HOPG on its basal and edge planes at three different polarization configurations. The orientation direction of HOPG edge plane can be accurately determined by the angle-resolved polarization-dependent G mode intensity without rotating sample, which shows potential application for orientation determination of other anisotropic and vertically standing two-dimensional materials and other materials.

Antioxidative Protective Effect of Icariin on the FeSO_4/H_2O_2-damaged Human Sperm Based on Confocal Raman Micro-spectroscopy

Oxidative stress is implicated in male infertility and significantly higher reactive oxygen species are detected in 25% of infertile males. Although different agents of various alternative medicines, including traditional Chinese medicine, have been tried with varying success, evidence remains limited on whether and how much herbs or supplements might help increase the anti-oxidant ability of the sperm. This study examined the anti-oxidative effects of icariin, a flavonoid isolated from Herba Epimedii, on the human sperm. We prepared the FeSO4/H202-damaged human sperms, which were co-cultured with icariin in vitro, and then observed the changes of the sperm by employing Raman mi- cro-spectroscopy. The results showed that Raman mapping with a 514 nm excitation laser allowed clear differentiation of the nucleus, neck, and, in particular, the mitochondria-rich middle piece of a human sperm cell. The effect oficariin on different organelles of the sperm was quantified by localized spectral Raman signatures obtained within milli-seconds, and icariin could keep the ＂Raman fingerprint＂ of the human sperm the same as the control groups, suggesting that icariin could protect the human sperm from being damaged by FeSO4/H202. Icariin may serve as a tonifying and replenishing agent of herbal origin for enhancing reproductive fimctions.