Using field hydrological data, the relationship between the mixing of salt water and fresh water and the tidal range/ high tidal level in the Changjiang (Yangtze) River estuary is discussed, and the transporting and c...Using field hydrological data, the relationship between the mixing of salt water and fresh water and the tidal range/ high tidal level in the Changjiang (Yangtze) River estuary is discussed, and the transporting and concentrating of suspended sediment in the estuary were also analysed in respect to the circulation, flocculation and stratified interface resulting from mixing.The calculation results by two-dimentional box model have confirmed the effects of the circulation on the concentrating of suspended sediment in the estuary. The conclusions derived from this work have deepened the understanding on the mixing in the Changjiang River estuary and are of significance in bo’th theory and practice.展开更多
The deep cement mixing(DCM)is used to improve the capacity and reduce the settlement of the soft ground by forming cemented clay columns.The investigation on the mechanical behaviour of the DCM samples is limited to e...The deep cement mixing(DCM)is used to improve the capacity and reduce the settlement of the soft ground by forming cemented clay columns.The investigation on the mechanical behaviour of the DCM samples is limited to either laboratory-prepared samples or in-situ samples under unconfined compression.In this study,a series of drained and undrained triaxial shearing tests was performed on the in-situ cored DCM samples with high cement content to assess their mechanical behaviours.It is found that the drainage condition affects significantly the stiffness,peak and residual strengths of the DCM samples,which is mainly due to the state of excess pore water pressure at different strain levels,i.e.being positive before the peak deviatoric stress and negative after the peak deviatoric stress,in the undrained tests.The slope of the failure envelope changes obviously with the confining pressures,being steeper at lower stress levels and flatter at higher stress levels.The strength parameters,effective cohesion and friction angle obtained from lower stress levels(c′0 andφ′0)are 400 kPa and 58°,respectively,which are deemed to be true for design in most DCM applications where the in-situ stress levels are normally at lower values of 50-200 kPa.Additionally,the computed tomography(CT)scanning system was adopted to visualize the internal structures of DCM samples.It is found that the clay pockets existing inside the DCM samples due to uneven mixing affect markedly their stress-strain behaviour,which is one of the main reasons for the high variability of the DCM samples.展开更多
The characteristics and formation mechanisms of the mixed siliciclastic-carbonate reservoirs of the Paleogene Shahejie Formation in the central Bohai Sea were examined based on polarized light microscopy and scanning ...The characteristics and formation mechanisms of the mixed siliciclastic-carbonate reservoirs of the Paleogene Shahejie Formation in the central Bohai Sea were examined based on polarized light microscopy and scanning electron microscopy observations, X-ray diffrac- tometry, carbon and oxygen stable isotope geochemistry, and integrated fluid inclusion analysis. High-quality reservoirs are mainly distributed in Type I and Type II mixed siliciclastic-carbonate sediments, and the dominant pore types include residual primary intergranular pores and intrafossil pores, feldspar dissolution pores mainly devel- oped in Type II sediments. Type I mixed sediments are characterized by precipitation of early pore-lining dolo- mite, relatively weak mechanical compaction during deep burial, and the occurrence of abundant oil inclusions in high-quality reservoirs. Microfacies played a critical role in the formation of the mixed reservoirs, and high-quality reservoirs are commonly found in high-energy environ- ments, such as fan delta underwater distributary channels, mouth bars, and submarine uplift beach bars. Abundant intrafossil pores were formed by bioclastic decay, and secondary pores due to feldspar dissolution further enhance reservoir porosity. Mechanical compaction was inhibited by the precipitation of pore-lining dolomite formed during early stage, and oil emplacement has further led to the preservation of good reservoir quality.展开更多
An innovative in-situ stabilisation treatment followed by ex-situ sediment composting was tested for its ability to treat and dispose of heavy-metal-polluted sediments in a river near the Chinese Pearl Delta. First, p...An innovative in-situ stabilisation treatment followed by ex-situ sediment composting was tested for its ability to treat and dispose of heavy-metal-polluted sediments in a river near the Chinese Pearl Delta. First, polluted sediments were treated in-situ to stabilise the heavy metals. Then the treated sediments were dredged, dewatered and sent for high temperature aerobic composting (HTAC) treatment. Finally, the compost products were used as a fertiliser for fiver bank plants. The stabilisation efficiency of heavy metals during the process was investigated and the results are as follows: (1) using in-situ stabilisation, the extraction concentrations of Cu, Zn and Pb were reduced by 65.0%, 82.2% and 90.0%, respectively, which are much lower than the national standard given in the Identification Standard for Hazardous Waste (GB5085.3-1996); (2) chemical fraction analysis showed that heavy metals were further stabilized during the HTAC treatment; (3) the concentrations of Cu, Zn and Pb in rainwater leachate through the river bank met the level of class V in the Environmental Quality Standards for Surface Water in China (GB3838-2002). Therefore, using this new process, the toxicities of heavy metals in sediments were reduced markedly.展开更多
Compared with the laboratory acoustic measurement of sediment samples, the in-situ acoustic measurement in marine sediment is considered more accurate and rehable, because it covers all of the surrounding environment ...Compared with the laboratory acoustic measurement of sediment samples, the in-situ acoustic measurement in marine sediment is considered more accurate and rehable, because it covers all of the surrounding environment factors and avoids the disturbance during the course of sampling and transporting of sediment samples. A new multi-frequency in-situ geoacoustic measurement system (MFIS^AMS) has been developed. The system can provide acoustic vdocity (compressional wave) and attenuation profiles of the uppermost 4 - 8 m sediment in the seafloor. It consists of 8 channels with 12 frequencies (multi-frequencies) and 0.5 - 2 MHz sampling rates. The data collected can be transmiuted in real-time. Associated with inclinometer and altimeter, it can provide the data for depth emendation. Acoustic velocity and attenuation data have been obtained from two in-situ experiments conducted in the Hangzhou Bay.展开更多
The Carboniferous system in the Xiaohaizi area, Bachu County, Xinjiang Uygur Autonomous Region, composed of typical mixed terrigenous clastic, carbonate and sulphate sediments, was mainly deposited in the tidal flat a...The Carboniferous system in the Xiaohaizi area, Bachu County, Xinjiang Uygur Autonomous Region, composed of typical mixed terrigenous clastic, carbonate and sulphate sediments, was mainly deposited in the tidal flat and lagoon environments. The mixed sediments occur as the following eleven types: 1. limestone intercalated with siltstone; 2. interbeds of shale and limestone; 3. gypsolyte interbedded with limestone; 4. gypsolyte intercalated with siltstone; 5. gypsolyte interbedded with shale; 6. gypsolyte intercalated with siltstone, limestone and dolomite; 7. siltstone interbedded with gypsolyte and limestone; 8. terrigenous detritus scattered in carbonate matrix; 9. carbonate as cement in clastic rocks; 10. mixed sediments of carbonate and terrigenous mud; 11. mixed sediments of carbonate grains with terrigenous sand. Based on the analysis of the dynamic mechanism of mixed sediments, it is believed that these types of mixed sediments in the study area were controlled by climate, sea level change and sources of sediments.展开更多
The western continental margin of India is one of the highly productive regions in the global ocean.Primary productivity is induced by upwelling and convective mixing during the southwest and northeast monsoons respec...The western continental margin of India is one of the highly productive regions in the global ocean.Primary productivity is induced by upwelling and convective mixing during the southwest and northeast monsoons respectively.Realizing the importance of high primary productivity,a sediment core was collected below the current oxygen minimum zone(OMZ) from the southwestern continental margin of India.This was dated by AMS radiocarbon and as many as 60 paleoclimate/paceoceanographic proxies,such as particle size,biogenic components,major,trace and rare earth elements(REEs) which were measured for the first time to determine sources of sediment,biogeochemical processes operating in the water column and their variations since the last glacial cycle.R-mode factor analysis of comprehensive data indicates that the dominant regulator of paleoproductivity is the southwest monsoon wind induced upwelling.Other paleoproductivity related factors identified are the marine biogenic component and biogenic detritus(as an exported component from the water column added to the bottom sediment).All paleoproductivity components increased significantly during the marine isotope stage-1(MIS-1)compared to those accumulated from MIS-4 to MIS-2.The second group of factors identified are the terrigenous sediments with heavy minerals like zircon and ilmenite.The terrigenous sediment,in particular,increased during MIS-2 when the sea-level was lower;however,the heavy mineral component fluctuated over time implying pulsed inputs of sediment.The diagenetic fraction and reducing component are the third group of factors identified which varied with time with increased accumulation during the MIS transitions.The primary productivity along the southwestern continental margin of India seems to have been controlled principally by the upwelling during the southwest monsoon season that was weaker from MIS-4 to MIS-2,as relative to that during the MIS-1.In contrast,increased glacial productivity noticed in sediments deposited below the current oxygen minimum zone(OMZ) along the north of the study area that can be linked to entrainment of nutrients through the intensified convective mixing of surface water during the northeast monsoon.The sequestration of greenhouse gases by the western continental margin of India was higher during glacial than interglacial cycles.展开更多
An initial-boundary value problem for shallow equation system consisting of water dynamics equations,silt transport equation, the equation of bottom topography change,and of some boundary and initial conditions is stu...An initial-boundary value problem for shallow equation system consisting of water dynamics equations,silt transport equation, the equation of bottom topography change,and of some boundary and initial conditions is studied, the existence of its generalized solution and semidiscrete mixed finite element(MFE) solution was discussed, and the error estimates of the semidiscrete MFE solution was derived.The error estimates are optimal.展开更多
The mixed finite element(MFE) methods for a shallow water equation system consisting of water dynamics equations,silt transport equation,and the equation of bottom topography change were derived.A fully discrete MFE s...The mixed finite element(MFE) methods for a shallow water equation system consisting of water dynamics equations,silt transport equation,and the equation of bottom topography change were derived.A fully discrete MFE scheme for the discrete_time along characteristics is presented and error estimates are established.The existence and convergence of MFE solution of the discrete current velocity,elevation of the bottom topography,thickness of fluid column,and mass rate of sediment is demonstrated.展开更多
Until 1980s,mixed siliciclastic-carbonate sediments(MSCSs)had been thought as odd exception and not important.However,MSCSs are quite common in the modern and the ancient times and can be important in
The changing patterns of land cover and land use in the tropical river basin over time are critical. The hydrological phenomena at basin and sub basin scale are affected positively or negatively by dynamics of the lan...The changing patterns of land cover and land use in the tropical river basin over time are critical. The hydrological phenomena at basin and sub basin scale are affected positively or negatively by dynamics of the land cover and land use patterns. Hence identifying causes and driving factors aid in taking appropriate measures to avert the impacts. This study determined the influences of sub basins dominated by tea plantations, forests and agricultural land uses in terms of streamflow and sediment flux variability in Sondu Miriu River Basin in Kenya, East Africa. Field-based investigations were conducted through sampling of flow velocities, turbidity and TSSC obtained from existing River Gauging Stations established within the three sub basins. The sub basin dominated by mixed farming land cover exhibits high turbidity approximately 620 NTU and high levels of total suspended sediment concentration (TSSC) of the order of 630 mg/l in wet seasons. The turbidity levels and TSSC were low in sub basins dominated by forest and tea plantations with approximately mean value of 17 - 29 NTU and 0.019 g/l. The sediment loads in sub basin dominated by mixed farming in the pre planting season in January to February were about 900 tonnes/day higher than that in crop growing season. In sub basins dominated by forest cover and tea plantations, sediment loads were low ranging between 2 - 7 tonnes/day. The relationship between stream flows and area under tea plantations, forests and mixed farming ranged between R<sup>2</sup> of 0.025 and 0.16. Tea plantations and forests influence the stream flows and sediment yields in long term duration while in mixed farming variations were observed seasonally. The strong relationships between rainfall and stream flows at the sub basins ranging between R<sup>2</sup> of 0.84 and 0.97 revealed the significance of rainfall in hydrologic response of the Sondu Miriu River Basin.展开更多
The natural gas hydrate has been regarded as an important future green energy.Significant progress on the hydrate exploitation has been made,but some challenges are still remaining.In order to enhance the hydrate expl...The natural gas hydrate has been regarded as an important future green energy.Significant progress on the hydrate exploitation has been made,but some challenges are still remaining.In order to enhance the hydrate exploitation efficiency,a significant understanding of the effective thermal conductivity(ETC)of the hydrate-bearing sediment has become essential,since it directly controls the heat and mass transfer behaviors,and thereby determines the stability of hydrate reservoir and production rate.In this study,the effective thermal conductivities of various hydrate-bearing sediments were in-situ measured and studied.The impacts of temperature,particle size and type of sediment were investigated.The effective thermal conductivities of the quartz sand sediments before and after hydrate formation were in-situ measured.The results show the weak negative correlation of effective thermal conductivity of the quartz sand sediment on the temperature before and after the hydrate formation.The effective thermal conductivity of the hydrate-bearing sediment decreases with the increase of particle size of the sediment.The dominant effect of the type of porous medium on the characteristics of the effective thermal conductivity of hydrate-bearing sediment was highlighted.The results indicate that both the effective thermal conductivities of hydrate-bearing quartz sand sediment and hydrate-bearing silicon carbide sediment are weakly negatively correlated with temperature,but the effective thermal conductivity of hydrate-bearing clay sediment is weakly positively dependent on the temperature.In addition,the values of the effective thermal conductivities of various hydrate-bearing sediments are in the order of hydrate-bearing silicon carbide sediment>hydrate-bearing quartz sand sediment>hydrate-bearing clay sediment.These findings could suggest that the intrinsic thermal conductivity of porous medium could control the characteristics of effective thermal conductivity of hydrate-bearing sediment.展开更多
According to the mechanism of sediment suspension under waves, namely, the main reason of sediment suspension changes from the turbulent mixing in the bottom boundary layer to the periodic motion of the water particle...According to the mechanism of sediment suspension under waves, namely, the main reason of sediment suspension changes from the turbulent mixing in the bottom boundary layer to the periodic motion of the water particle near the free water surface, a three-layer model of sediment concentration distribution due to waves is presented along the whole water depth based on the concept of the finite mixing length. 1he determination of the parameters in the model is discussed and an empirical formula is suggested. Comparisons between the calculated results and the measurements indicate that the resuits of the model agree well with the data from both the large and small scale flume experiments.展开更多
文摘Using field hydrological data, the relationship between the mixing of salt water and fresh water and the tidal range/ high tidal level in the Changjiang (Yangtze) River estuary is discussed, and the transporting and concentrating of suspended sediment in the estuary were also analysed in respect to the circulation, flocculation and stratified interface resulting from mixing.The calculation results by two-dimentional box model have confirmed the effects of the circulation on the concentrating of suspended sediment in the estuary. The conclusions derived from this work have deepened the understanding on the mixing in the Changjiang River estuary and are of significance in bo’th theory and practice.
基金funded by the Environment and Conservation Fund(Grant Nos.2020-170 and 2021-156)the National Natural Science Foundation of China(Grant No.42102327).
文摘The deep cement mixing(DCM)is used to improve the capacity and reduce the settlement of the soft ground by forming cemented clay columns.The investigation on the mechanical behaviour of the DCM samples is limited to either laboratory-prepared samples or in-situ samples under unconfined compression.In this study,a series of drained and undrained triaxial shearing tests was performed on the in-situ cored DCM samples with high cement content to assess their mechanical behaviours.It is found that the drainage condition affects significantly the stiffness,peak and residual strengths of the DCM samples,which is mainly due to the state of excess pore water pressure at different strain levels,i.e.being positive before the peak deviatoric stress and negative after the peak deviatoric stress,in the undrained tests.The slope of the failure envelope changes obviously with the confining pressures,being steeper at lower stress levels and flatter at higher stress levels.The strength parameters,effective cohesion and friction angle obtained from lower stress levels(c′0 andφ′0)are 400 kPa and 58°,respectively,which are deemed to be true for design in most DCM applications where the in-situ stress levels are normally at lower values of 50-200 kPa.Additionally,the computed tomography(CT)scanning system was adopted to visualize the internal structures of DCM samples.It is found that the clay pockets existing inside the DCM samples due to uneven mixing affect markedly their stress-strain behaviour,which is one of the main reasons for the high variability of the DCM samples.
基金financially supported by the National Science & Technology Specific Project (Grant No. 2011ZX05023-006)
文摘The characteristics and formation mechanisms of the mixed siliciclastic-carbonate reservoirs of the Paleogene Shahejie Formation in the central Bohai Sea were examined based on polarized light microscopy and scanning electron microscopy observations, X-ray diffrac- tometry, carbon and oxygen stable isotope geochemistry, and integrated fluid inclusion analysis. High-quality reservoirs are mainly distributed in Type I and Type II mixed siliciclastic-carbonate sediments, and the dominant pore types include residual primary intergranular pores and intrafossil pores, feldspar dissolution pores mainly devel- oped in Type II sediments. Type I mixed sediments are characterized by precipitation of early pore-lining dolo- mite, relatively weak mechanical compaction during deep burial, and the occurrence of abundant oil inclusions in high-quality reservoirs. Microfacies played a critical role in the formation of the mixed reservoirs, and high-quality reservoirs are commonly found in high-energy environ- ments, such as fan delta underwater distributary channels, mouth bars, and submarine uplift beach bars. Abundant intrafossil pores were formed by bioclastic decay, and secondary pores due to feldspar dissolution further enhance reservoir porosity. Mechanical compaction was inhibited by the precipitation of pore-lining dolomite formed during early stage, and oil emplacement has further led to the preservation of good reservoir quality.
基金supported by the Scientific and Tech- nological Planning Project of Guangdong Province (No. 2003A3040404)the Guangdong & Hong Kong Tech- nology Cooperation Funding (No. 2006A36702001)
文摘An innovative in-situ stabilisation treatment followed by ex-situ sediment composting was tested for its ability to treat and dispose of heavy-metal-polluted sediments in a river near the Chinese Pearl Delta. First, polluted sediments were treated in-situ to stabilise the heavy metals. Then the treated sediments were dredged, dewatered and sent for high temperature aerobic composting (HTAC) treatment. Finally, the compost products were used as a fertiliser for fiver bank plants. The stabilisation efficiency of heavy metals during the process was investigated and the results are as follows: (1) using in-situ stabilisation, the extraction concentrations of Cu, Zn and Pb were reduced by 65.0%, 82.2% and 90.0%, respectively, which are much lower than the national standard given in the Identification Standard for Hazardous Waste (GB5085.3-1996); (2) chemical fraction analysis showed that heavy metals were further stabilized during the HTAC treatment; (3) the concentrations of Cu, Zn and Pb in rainwater leachate through the river bank met the level of class V in the Environmental Quality Standards for Surface Water in China (GB3838-2002). Therefore, using this new process, the toxicities of heavy metals in sediments were reduced markedly.
基金supported by the National High Technology Research and Development Program of China(863 Pro-gram, Grant No.2005AA615040)the National Natural Science Foundation of China(Grant No.40776038)+2 种基金Open Fund of Key Laboratory of Geo-detection(China University of Geosciences,Beijing),Ministry of Education (GrantNo. GDL0802)the Ocean Public Welfare Scientific Research Special Appropriation Project(Grant Nos.200805079and 200805005)the Open Fund of Key Laboratory of Submarine Geoscience,State Oceanic Administration(Grant No. KCSG0803)
文摘Compared with the laboratory acoustic measurement of sediment samples, the in-situ acoustic measurement in marine sediment is considered more accurate and rehable, because it covers all of the surrounding environment factors and avoids the disturbance during the course of sampling and transporting of sediment samples. A new multi-frequency in-situ geoacoustic measurement system (MFIS^AMS) has been developed. The system can provide acoustic vdocity (compressional wave) and attenuation profiles of the uppermost 4 - 8 m sediment in the seafloor. It consists of 8 channels with 12 frequencies (multi-frequencies) and 0.5 - 2 MHz sampling rates. The data collected can be transmiuted in real-time. Associated with inclinometer and altimeter, it can provide the data for depth emendation. Acoustic velocity and attenuation data have been obtained from two in-situ experiments conducted in the Hangzhou Bay.
基金supported by the National Major Key Project during the"Eighth Five-Year Plan period".
文摘The Carboniferous system in the Xiaohaizi area, Bachu County, Xinjiang Uygur Autonomous Region, composed of typical mixed terrigenous clastic, carbonate and sulphate sediments, was mainly deposited in the tidal flat and lagoon environments. The mixed sediments occur as the following eleven types: 1. limestone intercalated with siltstone; 2. interbeds of shale and limestone; 3. gypsolyte interbedded with limestone; 4. gypsolyte intercalated with siltstone; 5. gypsolyte interbedded with shale; 6. gypsolyte intercalated with siltstone, limestone and dolomite; 7. siltstone interbedded with gypsolyte and limestone; 8. terrigenous detritus scattered in carbonate matrix; 9. carbonate as cement in clastic rocks; 10. mixed sediments of carbonate and terrigenous mud; 11. mixed sediments of carbonate grains with terrigenous sand. Based on the analysis of the dynamic mechanism of mixed sediments, it is believed that these types of mixed sediments in the study area were controlled by climate, sea level change and sources of sediments.
基金National Centre for Antarctic and Ocean Research(NCAOR) for continuous support and encouragementthe MoES(MoES/36/OOIS/Siber/07) for funding a GEOTRACES project
文摘The western continental margin of India is one of the highly productive regions in the global ocean.Primary productivity is induced by upwelling and convective mixing during the southwest and northeast monsoons respectively.Realizing the importance of high primary productivity,a sediment core was collected below the current oxygen minimum zone(OMZ) from the southwestern continental margin of India.This was dated by AMS radiocarbon and as many as 60 paleoclimate/paceoceanographic proxies,such as particle size,biogenic components,major,trace and rare earth elements(REEs) which were measured for the first time to determine sources of sediment,biogeochemical processes operating in the water column and their variations since the last glacial cycle.R-mode factor analysis of comprehensive data indicates that the dominant regulator of paleoproductivity is the southwest monsoon wind induced upwelling.Other paleoproductivity related factors identified are the marine biogenic component and biogenic detritus(as an exported component from the water column added to the bottom sediment).All paleoproductivity components increased significantly during the marine isotope stage-1(MIS-1)compared to those accumulated from MIS-4 to MIS-2.The second group of factors identified are the terrigenous sediments with heavy minerals like zircon and ilmenite.The terrigenous sediment,in particular,increased during MIS-2 when the sea-level was lower;however,the heavy mineral component fluctuated over time implying pulsed inputs of sediment.The diagenetic fraction and reducing component are the third group of factors identified which varied with time with increased accumulation during the MIS transitions.The primary productivity along the southwestern continental margin of India seems to have been controlled principally by the upwelling during the southwest monsoon season that was weaker from MIS-4 to MIS-2,as relative to that during the MIS-1.In contrast,increased glacial productivity noticed in sediments deposited below the current oxygen minimum zone(OMZ) along the north of the study area that can be linked to entrainment of nutrients through the intensified convective mixing of surface water during the northeast monsoon.The sequestration of greenhouse gases by the western continental margin of India was higher during glacial than interglacial cycles.
文摘An initial-boundary value problem for shallow equation system consisting of water dynamics equations,silt transport equation, the equation of bottom topography change,and of some boundary and initial conditions is studied, the existence of its generalized solution and semidiscrete mixed finite element(MFE) solution was discussed, and the error estimates of the semidiscrete MFE solution was derived.The error estimates are optimal.
文摘The mixed finite element(MFE) methods for a shallow water equation system consisting of water dynamics equations,silt transport equation,and the equation of bottom topography change were derived.A fully discrete MFE scheme for the discrete_time along characteristics is presented and error estimates are established.The existence and convergence of MFE solution of the discrete current velocity,elevation of the bottom topography,thickness of fluid column,and mass rate of sediment is demonstrated.
基金financially supported by National Natural Science Foundation of China (Grant No. 41372123)
文摘Until 1980s,mixed siliciclastic-carbonate sediments(MSCSs)had been thought as odd exception and not important.However,MSCSs are quite common in the modern and the ancient times and can be important in
文摘The changing patterns of land cover and land use in the tropical river basin over time are critical. The hydrological phenomena at basin and sub basin scale are affected positively or negatively by dynamics of the land cover and land use patterns. Hence identifying causes and driving factors aid in taking appropriate measures to avert the impacts. This study determined the influences of sub basins dominated by tea plantations, forests and agricultural land uses in terms of streamflow and sediment flux variability in Sondu Miriu River Basin in Kenya, East Africa. Field-based investigations were conducted through sampling of flow velocities, turbidity and TSSC obtained from existing River Gauging Stations established within the three sub basins. The sub basin dominated by mixed farming land cover exhibits high turbidity approximately 620 NTU and high levels of total suspended sediment concentration (TSSC) of the order of 630 mg/l in wet seasons. The turbidity levels and TSSC were low in sub basins dominated by forest and tea plantations with approximately mean value of 17 - 29 NTU and 0.019 g/l. The sediment loads in sub basin dominated by mixed farming in the pre planting season in January to February were about 900 tonnes/day higher than that in crop growing season. In sub basins dominated by forest cover and tea plantations, sediment loads were low ranging between 2 - 7 tonnes/day. The relationship between stream flows and area under tea plantations, forests and mixed farming ranged between R<sup>2</sup> of 0.025 and 0.16. Tea plantations and forests influence the stream flows and sediment yields in long term duration while in mixed farming variations were observed seasonally. The strong relationships between rainfall and stream flows at the sub basins ranging between R<sup>2</sup> of 0.84 and 0.97 revealed the significance of rainfall in hydrologic response of the Sondu Miriu River Basin.
基金This work was supported by the National Natural Science Foundation of China(U19B2005,21808238,U20B6005,22127812)the National Key Research and Development Program of China(2021YFC2800902).
文摘The natural gas hydrate has been regarded as an important future green energy.Significant progress on the hydrate exploitation has been made,but some challenges are still remaining.In order to enhance the hydrate exploitation efficiency,a significant understanding of the effective thermal conductivity(ETC)of the hydrate-bearing sediment has become essential,since it directly controls the heat and mass transfer behaviors,and thereby determines the stability of hydrate reservoir and production rate.In this study,the effective thermal conductivities of various hydrate-bearing sediments were in-situ measured and studied.The impacts of temperature,particle size and type of sediment were investigated.The effective thermal conductivities of the quartz sand sediments before and after hydrate formation were in-situ measured.The results show the weak negative correlation of effective thermal conductivity of the quartz sand sediment on the temperature before and after the hydrate formation.The effective thermal conductivity of the hydrate-bearing sediment decreases with the increase of particle size of the sediment.The dominant effect of the type of porous medium on the characteristics of the effective thermal conductivity of hydrate-bearing sediment was highlighted.The results indicate that both the effective thermal conductivities of hydrate-bearing quartz sand sediment and hydrate-bearing silicon carbide sediment are weakly negatively correlated with temperature,but the effective thermal conductivity of hydrate-bearing clay sediment is weakly positively dependent on the temperature.In addition,the values of the effective thermal conductivities of various hydrate-bearing sediments are in the order of hydrate-bearing silicon carbide sediment>hydrate-bearing quartz sand sediment>hydrate-bearing clay sediment.These findings could suggest that the intrinsic thermal conductivity of porous medium could control the characteristics of effective thermal conductivity of hydrate-bearing sediment.
基金supported by the National Natural Science Foundation of China (Grant No.50279029)
文摘According to the mechanism of sediment suspension under waves, namely, the main reason of sediment suspension changes from the turbulent mixing in the bottom boundary layer to the periodic motion of the water particle near the free water surface, a three-layer model of sediment concentration distribution due to waves is presented along the whole water depth based on the concept of the finite mixing length. 1he determination of the parameters in the model is discussed and an empirical formula is suggested. Comparisons between the calculated results and the measurements indicate that the resuits of the model agree well with the data from both the large and small scale flume experiments.