Methanol synthesis from hydrogenation of CO2 is investigated over Cu/ZnO/Al2O3 catalysts prepared by decomposition of M（Cu,Zn）-ammonia complexes （DMAC） at various temperatures.The catalysts were characterized in d...Methanol synthesis from hydrogenation of CO2 is investigated over Cu/ZnO/Al2O3 catalysts prepared by decomposition of M（Cu,Zn）-ammonia complexes （DMAC） at various temperatures.The catalysts were characterized in detail,including X-ray diffraction,N2 adsorption-desorption,N2O chemisorption,temperature-programmed reduction and evolved gas analyses.The influences of DMAC temperature,reaction temperature and specific Cu surface area on catalytic performance are investigated.It is considered that the aurichalcite phase in the precursor plays a key role in improving the physiochemical properties and activities of the final catalysts.The catalyst from rich-aurichalcite precursor exhibits large specific Cu surface area and high space time yield of methanol （212 g/（Lcat·h）;T=513 K,p=3MPa,SV=12000 h-1）.展开更多
One-dimension InAlO3 （ZnO）m superlattice nanowires were successfully synthesized via chemical vapor deposition. Transmission electron microscopy measurements reveal that the nanowires have a periodic layered structu...One-dimension InAlO3 （ZnO）m superlattice nanowires were successfully synthesized via chemical vapor deposition. Transmission electron microscopy measurements reveal that the nanowires have a periodic layered structure along the （0001） direction. The photoluminescence properties of InAlO3（ZnO）m superlattice nanowires are studied for the first time. The near-band-edge emissions exhibit an obvious red shift due to the formation of the localized tail states. The two peaks centered at 3.348 eV and 3.299 eV indicate a lever phenomenon at the low-temperature region. A new luminescence mechanism is proposed, combined with the special energy band structure of InAlO3（ZnO）m.展开更多
One-dimensional（ID） In2O3（ZnO）m superlattice nanobelts are synthesized by a chemical vapor deposition method.The formation of the In2O3（ZnO）m superlattice is verified by the high-resolution transmission electron...One-dimensional（ID） In2O3（ZnO）m superlattice nanobelts are synthesized by a chemical vapor deposition method.The formation of the In2O3（ZnO）m superlattice is verified by the high-resolution transmission electron microscopy images.The typical zigzag boundaries could be clearly observed.An additional peak at 614 cm^-1 is found in the Raman spectrum,which may correspond to the superlattice structure.The study about the electrical transport properties reveals that the In2O3（ZnO）m nanobelts exhibit peculiar nonlinear I-V characteristics even under the Ohmic contact measurement condition,which are different from the Ohmic behaviors of the In-doped ZnO nanobelts.The photoelectrical measurements show the differences in the photocurrent property between them,and their transport mechanisms are also discussed.展开更多
As promising abradable seal coating materials used in high temperature range, the homologous layered InFeO3（ZnO）m （m = 1, 2, 3...20） have attracted great attention. In this short review, we summary the research pr...As promising abradable seal coating materials used in high temperature range, the homologous layered InFeO3（ZnO）m （m = 1, 2, 3...20） have attracted great attention. In this short review, we summary the research progress in InFeO3（ZnO）m that were developed in our group. We first introduced a series of conventional abradable seal coating materials as a research motivation. Second, the phase composition and crystal structures of lnFeO3（ZnO）m system were presented. Then, their thermophysical properties, as the most important part, were introduced in detail. At last, the mechanical properties such as hardness, friction coefficient, erosion wear resistance of InFeO3（ZnO）m system were also described. Our summary indicates that InFeO3（ZnO）m sys- tems are promising abradable seal coating materials.展开更多
基金supported by the National Basic Research Program of China (No. 2011CB201404)the financial support of the State Key Laboratory for Oxo Synthesis and Selective Oxidation (OSSO) of China
文摘Methanol synthesis from hydrogenation of CO2 is investigated over Cu/ZnO/Al2O3 catalysts prepared by decomposition of M（Cu,Zn）-ammonia complexes （DMAC） at various temperatures.The catalysts were characterized in detail,including X-ray diffraction,N2 adsorption-desorption,N2O chemisorption,temperature-programmed reduction and evolved gas analyses.The influences of DMAC temperature,reaction temperature and specific Cu surface area on catalytic performance are investigated.It is considered that the aurichalcite phase in the precursor plays a key role in improving the physiochemical properties and activities of the final catalysts.The catalyst from rich-aurichalcite precursor exhibits large specific Cu surface area and high space time yield of methanol （212 g/（Lcat·h）;T=513 K,p=3MPa,SV=12000 h-1）.
基金Project supported by the Science Foundation for Distinguished Young Scholars of Heilongjiang Province,China (Grant No.JC200805)the Natural Science Foundation of Heilongjiang Province of China (Grant Nos.A2007-03,A200807,and F200828)the Personnel Bureau Project of Overseas Talent of Heilongjiang Province,China
文摘One-dimension InAlO3 （ZnO）m superlattice nanowires were successfully synthesized via chemical vapor deposition. Transmission electron microscopy measurements reveal that the nanowires have a periodic layered structure along the （0001） direction. The photoluminescence properties of InAlO3（ZnO）m superlattice nanowires are studied for the first time. The near-band-edge emissions exhibit an obvious red shift due to the formation of the localized tail states. The two peaks centered at 3.348 eV and 3.299 eV indicate a lever phenomenon at the low-temperature region. A new luminescence mechanism is proposed, combined with the special energy band structure of InAlO3（ZnO）m.
基金supported by the National Natural Science Foundation of China(Grant No.51172058)the Key Project of the Science Technology and Research Project of Education Bureau,Heilongjiang Province,China(Grant No.12521z012)the Natural Science Foundation of Heilongjiang Province for Returned Chinese Scholars,China(Grant No.LC2013C17)
文摘One-dimensional（ID） In2O3（ZnO）m superlattice nanobelts are synthesized by a chemical vapor deposition method.The formation of the In2O3（ZnO）m superlattice is verified by the high-resolution transmission electron microscopy images.The typical zigzag boundaries could be clearly observed.An additional peak at 614 cm^-1 is found in the Raman spectrum,which may correspond to the superlattice structure.The study about the electrical transport properties reveals that the In2O3（ZnO）m nanobelts exhibit peculiar nonlinear I-V characteristics even under the Ohmic contact measurement condition,which are different from the Ohmic behaviors of the In-doped ZnO nanobelts.The photoelectrical measurements show the differences in the photocurrent property between them,and their transport mechanisms are also discussed.
基金financially supported by the National Natural Science Foundation of China(Nos.51671015,51571007 and 51772012)the Beijing Municipal Science and Technology Commission(No.Z171100002017002)the Shenzhen Peacock Plan team(No.KQTD2016022619565911)
文摘As promising abradable seal coating materials used in high temperature range, the homologous layered InFeO3（ZnO）m （m = 1, 2, 3...20） have attracted great attention. In this short review, we summary the research progress in InFeO3（ZnO）m that were developed in our group. We first introduced a series of conventional abradable seal coating materials as a research motivation. Second, the phase composition and crystal structures of lnFeO3（ZnO）m system were presented. Then, their thermophysical properties, as the most important part, were introduced in detail. At last, the mechanical properties such as hardness, friction coefficient, erosion wear resistance of InFeO3（ZnO）m system were also described. Our summary indicates that InFeO3（ZnO）m sys- tems are promising abradable seal coating materials.
