A Loss-model-based Efficiency Optimization Control Method for Induction Traction System of High-speed Train under Emergency Self-propelled Mode

Increasing attention has been paid to the efficiency improvement of the induction traction system of high-speed trains due to the high demand for energy saving. In emergency self-propelled mode, however, the dc-link voltage and the traction power of the motor are significantly reduced, resulting in decreased traction efficiency due to the low load and low speed operations. Aiming to tackle this problem, a novel efficiency improved control method is introduced to the emergency mode of high-speed train traction system in this paper. In the proposed method, a total loss model of induction motor considering the behaviors of both iron and copper loss is established. An improved iterative algorithm with decreased computational burden is then introduced, resulting in a fast solving of the optimal flux reference for loss minimization at each control period. In addition, considering the parameter variation problem due to the low load and low speed operations, a parameter estimation method is integrated to improve the controller's robustness. The effectiveness of the proposed method on efficiency improvement at low voltage and low load conditions is demonstrated by simulated and experimental results.

Indirect Vector Control of Linear Induction Motors Using Space Vector Pulse Width Modulation

Vector control schemes have recently been used to drive linear induction motors(LIM)in high-performance applications.This trend promotes the development of precise and efficient control schemes for individual motors.This research aims to present a novel framework for speed and thrust force control of LIM using space vector pulse width modulation(SVPWM)inverters.The framework under consideration is developed in four stages.To begin,MATLAB Simulink was used to develop a detailed mathematical and electromechanical dynamicmodel.The research presents a modified SVPWM inverter control scheme.By tuning the proportional-integral(PI)controller with a transfer function,optimized values for the PI controller are derived.All the subsystems mentioned above are integrated to create a robust simulation of the LIM’s precise speed and thrust force control scheme.The reference speed values were chosen to evaluate the performance of the respective system,and the developed system’s response was verified using various data sets.For the low-speed range,a reference value of 10m/s is used,while a reference value of 100 m/s is used for the high-speed range.The speed output response indicates that themotor reached reference speed in amatter of seconds,as the delay time is between 8 and 10 s.The maximum amplitude of thrust achieved is less than 400N,demonstrating the controller’s capability to control a high-speed LIM with minimal thrust ripple.Due to the controlled speed range,the developed system is highly recommended for low-speed and high-speed and heavy-duty traction applications.

Enhanced Fuzzy Logic Control Model and Sliding Mode Based on Field Oriented Control of Induction Motor

In the context of induction motor control, there are various control strategies used to separately control torque and flux. One common approach is known as Field-Oriented Control (FOC). This technique involves transforming the three-phase currents and voltages into a rotating reference frame, commonly referred to as the “dq” frame. In this frame, the torque/speed and flux components are decoupled, allowing for independent control, by doing so, the motor’s speed can be regulated accurately and maintain a constant flux which is crucial to ensure optimal motor performance and efficiency. The research focused on studying and simulating a field-oriented control system using fuzzy control techniques for an induction motor. The aim was to address the issue of parameter variations, particularly the change in rotor resistance during motor operation, which causes the control system to deviate from the desired direction. This deviation implies to an increase in the magnetic flux value, specifically the flux component on the q-axis. By employing fuzzy logic techniques to regulate flux vector’s components in the dq frame, this problem was successfully resolved, ensuring that the magnetic flux value remains within the nominal limits. To enhance the control system’s performance, response speed, and efficiency of the motor, sliding mode controllers were implemented to regulate the current in the inner loop. The simulation results demonstrated the proficiency of the proposed methodology.

High Performance Control of Matrix Converter Fed Induction Motor Drive System

Matrix converter fed motor drive is superior to pulse width modulation inverter drives since it not only provides bi-directional power flow,sinusoidal input/output currents,unity input power factor,but also allows a compact design due to the lack of DC-link capacitors for energy storage.In this paper,model and control of matrix converter fed induction motor drive system are analyzed.A combined control strategy is simplified and improved,which realizes space vector pulse width modulation of matrix converter and rotor flux oriented vector control technique for induction motor drive simultaneously.This control strategy combines the advantages of matrix converter with the good drive performance of vector control technique.Experimental results demonstrate the feasibility and effectiveness of the proposed control strategy.

Design and Development of a Vector Control System of Induction Motor Based on Dual CPU for Electric Vehicle

A vector control system for electric vehicle (EV) induction motor drive system is designed and developed. Its hardware system based on dual CPU(microcomputer 80C196KC and DSP TMS320F2407) is implemented. The fundamental mathematics equations of induction motor in the general synchronously rotating reference frame ( M T frame) used for vector control are achieved by coordinate transformation. Rotor flux equation and torque equation are deduced. According to these equations, an induction motor mathematical model and rotor flux observer model are built separately. The rotor flux field oriented vector control method is implemented based on these models in system software, some of the simulation results with Matab/Simulink are given. The simulation results show that the vector control system for EV induction motor drive system has better static and dynamic performance, and the rotor flux field oriented vector control method was practically verified.

Research on vector control system of induction motor for electric vehicle

In order to improve the effect of the induction motor controller of the electric vehicle and meet the special requirements of the electric vehicle,an improved method-vector control method is put forward.By analyzing the traditional vector control method,a model of induction motor is established considering stator iron loss and rotor iron loss.This model contains physical model and mathematical model.Mathematical model is set up based on the special requirements of electric vehicles on the induction motor,that is,the induction motor must have a wide speed range and fast torque response.Then,through the extraction of the formula,the dynamic compensation proposal and static compensation proposal can be got.Ultimately,the simulation analysis testifies the effectiveness of the method.

Implementation of Adaptive Neuro Fuzzy Inference System in Speed Control of Induction Motor Drives

A new speed control approach based on the Adaptive Neuro-Fuzzy Inference System (ANFIS) to a closed-loop, variable speed induction motor (IM) drive is proposed in this paper. ANFIS provides a nonlinear modeling of motor drive system and the motor speed can accurately track the reference signal. ANFIS has the advantages of employing expert knowledge from the fuzzy inference system and the learning capability of neural networks. The various functional blocks of the system which govern the system behavior for small variations about the operating point are derived, and the transient responses are presented. The proposed (ANFIS) controller is compared with PI controller by computer simulation through the MATLAB/SIMULINK software. The obtained results demonstrate the effectiveness of the proposed control scheme.

Modern Multilevel Control Technique Used in Electric and Hybrid Drive System with Induction Motors

The mathematical model of the modem induction traction motor （TRIM and cutting magnetic circuit traction motor）, supplied with IPM inverter with different control technique is presented in the paper. In electric and hybrid vehicle are applied： FLMC （Fuzzy Logic Mode Control）, SLMC （Sliding Mode Control）, NRMC （Neural Regulator Control）, and Direct Power and Torque Control for Space Vector Modulated inverter （DPTC SVM）. In the special solution of the electric and hybrid vehicle are also applied a Random Switching Frequency Modulation. The control of hybrid vehicle should assure the realization of established transport-assignments in the definite time, at the optimum of energy consumption. One can this realize using. The multi criteria control system. Some results of the computer simulations are presented in the paper. Results of numerical calculation were verified for laboratory model of the electric and hybrid wheel vehicles traction motor.

INDUCTION MOTOR SPEED CONTROL SYSTEM BASED ON FUZZY NEURAL NETWORK

A fuzzy neural network controller with the teaching controller guidance and parameter regulations for vector-controlled induction motor is proposed. The design procedures of the fuzzy neural controller and the teaching controller are described. The parameters of the membership function are regulated by an on-line learning algorithm. The speed responses of the system under the condition, where the target functions are chosen as I qs and ω, are analyzed. The system responses with the variant of parameter moment of inertial J, viscous coefficients B and torque constant K tare also analyzed. Simulation results show that the control scheme and the controller have the advantages of rapid speed response and good robustness.

Speed Sensorless Vector Control of Induction Motor Based on Reduced Order Extended Kalman Filter

A speed sensorless vector control system of induction motor with estimated rotor speed and rotor flux using a new reduced order extended Kalman filter is proposed. With this method, two rotor flux components are selected as the state variables, and the rotor speed as an estimated parameter is regarded as an augmented state variable. The algorithm with reduced order decreases the computational complexity and makes the proposed estimator feasible to be implemented in real time. The simulation results show high accuracy of the estimation algorithm and good performance of speed control, and verify the usefulness of the proposed algorithm.

A Review of Nonlinear Kalman Filter Appling to Sensorless Control for AC Motor Drives

Sensorless control of AC motor drives,which takes the advantages of cost saving,higher reliability,and less hardware,has been developed for several decades.Among the existing speed sensorless control methods,nonlinear Kalman filter-based one has attached widespread attention due to its superb estimation accuracy and inherent resistibility to noise.However,the determination of noise covariance matrix and robustness of model uncertainties are still open issues in practice.A great number of studies try to solve these problems in resent years.This paper reviews the application of extended Kalman filter(EKF),unscented Kalman filter(UKF),and cubature Kalman filter(CKF)in speed sensorless control for AC motor drives.As an iterative algorithm,EKF has advantages in processor implementation.However,EKF suffers from the linearization error and model uncertainties when applying to sensorless control system.This paper presents the predominant improvements of EKF which is also applicative in UKF and CKF mostly.

Study on Rotor IGBT Chopper Control for Induction Motor Drive

Rotor chopper control is a simple and effective drive method for induction motor. This paper presents a novel IGBT chopper topology,which can both adjust rotor resistance and protect IGBT efficiently. Investigation on the quasi transient state of the rotor rectifying circuit is made, and a nonlinear mapping between the equivalent resistance and the duty cycle is deduced. Furthermore, the method for determining the magnitude of the external resistor is introduced.

A Review of Sensorless Control Methods for AC Motor Drives

In recent years,the application of sensorless AC motor drives is expanding in areas ranging from industrial applications to household electrical appliances.As is well known,the advantages of sensorless motor drives include lower cost,increased reliability,reduced hardware complexity,better noise immunity,and less maintenance requirements.With the development of modern industrial automation,more advanced sensorless control strategies are needed to meet the requirements of applications.For sensorless motor drives at low-and zero-speed operation,inverter nonlinearities and motor parameter variation have significant impact on the stability of control system.Meanwhile,high observer’s bandwidth is required in high-speed region.This paper introduces the state of art of recent progress in sensorless AC motor drives.In addition,this paper presents the sensorless control strategies we investigated for practical industrial and household applications.Both advanced sensorless drives of induction motor(IM)and permanent magnet synchronous motor(PMSM)are presented in this paper.

Sensorless Vector Control of Parallel-Connected Multiple Induction Motors Fed by a Single Inverter

A method of improving the stability of multiple-motor drive system fed by a 3-leg single inverter has been devised that employs the averages and differences of estimated parameters for field-oriented control. The parameters of each motor (stator current, rotor flux, and speed) are estimated using adaptive rotor flux observers to achieve sensorless control. The validity and effective of the proposed method have been demonstrated through simulations and experiments.

CONVEX CONTROLLER DESIGN APPLIED TO AC INDUCTION MOTOR TO SATISFY MULTIPLE SIMULTANEOUS SPECIFICATIONS

The application of a closed-loop specification oriented feedback control design method, which addresses the design of controllers to satisfy multiple simultaneous conflicting closed-loop performance specifications is presented. The proposed approach is well suited to the design of controllers which must meet a set of conflicting performance specifications. Gain tuning is central to the design process, however, the tuning process is greatly simplified over that presented by the problem of tuning a PID controller for example. The proposed control method is applied to an AC induction motor, with an inner-loop flux vector controller applied to design a position control system. Experimental results verify the effectiveness of this method.

Single Phase Induction Motor Drive with Restrained Speed and Torque Ripples Using Neural Network Predictive Controller

In industrial drives, electric motors are extensively utilized to impart motion control and induction motors are the most familiar drive at present due to its extensive performance characteristic similar with that of DC drives. Precise control of drives is the main attribute in industries to optimize the performance and to increase its production rate. In motion control, the major considerations are the torque and speed ripples. Design of controllers has become increasingly complex to such systems for better management of energy and raw materials to attain optimal performance. Meager parameter appraisal results are unsuitable, leading to unstable operation. The rapid intensification of digital computer revolutionizes to practice precise control and allows implementation of advanced control strategy to extremely multifaceted systems. To solve complex control problems, model predictive control is an authoritative scheme, which exploits an explicit model of the process to be controlled. This paper presents a predictive control strategy by a neural network predictive controller based single phase induction motor drive to minimize the speed and torque ripples. The proposed method exhibits better performance than the conventional controller and validity of the proposed method is verified by the simulation results using MATLAB software.

Vector Control Scheme of Five-Phase Induction Machines under Open-Circuit Phase Faults

Multiphase induction machine is normally controlled using rotor field oriented vector control. Under phase（s） loss, the machine currents can be optimally controlled to satisfy certain optimization criteria. In this paper, a vector control scheme to a five-phase induction machine is introduced to ensure equal phase currents and minimum torque ripples under a phase open circuit. The controller idea can be extended to any number of phases with any number of open phases. The fundamental dq components of the stator voltage are obtained using only two PI controllers for the fundamental sequence plane, as in conventional vector control of three-phase machines. Based on steady state model, a simple expression is derived to estimate the required dq voltage components of other sequence planes to ensure equal stator phase currents and minimum torque ripple. A five-phase machine is simulated using MATLAB/Simulink to ensure controller validity.

Nonlinear Decoupling Control of the Bearingless Induction Motors Based on the Airgap Motor Flux Orientation

The bearingless induction motor, which combines the inductionmotor and magnetic bearing is a strongly coupled complicatednonlinear system; the decoupling control of the electromag- net toqueand readial levitation force is the base of the stable operation ofthe benaringless motor. In this paper, the air-gap motor fluxoriented vector control is proposed to realize the decoupling controlof this nonlinear system even in the transient case based on thelevitation principle. Simulations show the stable suspension and goodperformance of the proposed algorithm.

Genetic algorithm and particle swarm optimization tuned fuzzy PID controller on direct torque control of dual star induction motor

This study presents analysis, control and comparison of three hybrid approaches for the direct torque control (DTC) of the dual star induction motor (DSIM) drive. Its objective consists of combining three different heuristic optimization techniques including PID-PSO, Fuzzy-PSO and GA-PSO to improve the DSIM speed controlled loop behavior. The GA and PSO algorithms are developed and implemented into MATLAB. As a result, fuzzy-PSO is the most appropriate scheme. The main performance of fuzzy-PSO is reducing high torque ripples, improving rise time and avoiding disturbances that affect the drive performance.

Design and simulation of electrical dynamometer using improved DTC induction motor driver

AC motors, especially the squirrel cage induction motors have the advantages of simple structure, good reliability and low cost. They are more suitable to be used as electrical dynamometers to provide dynamic load for bench test systems. But, the speed and torque of induction motors are not easy to be controlled accurately. In this work, an electrical dynamometer based on the induction motor is proposed. In order to get better control performance of torque and speed of induction motor, an improved direct torque control method(DTC) is also developed based on the space vector modulation(SVM) technique. The performance of the proposed dynamometer system is validated in the Matlab/Simulink platform. The simulation results show that the new dynamometer has good torque and stator flux response. And the torque and stator current ripples of it are reduced significantly compared with using the conventional DTC method.