The paper presents a flow plasma reactor permitting modification of the properties of water/aqueous solutions by stochastic resonance amplification of vibrations of selected chemical species in water with electromagne...The paper presents a flow plasma reactor permitting modification of the properties of water/aqueous solutions by stochastic resonance amplification of vibrations of selected chemical species in water with electromagnetic noise generated during a plasma discharge. The main parameters characterizing the quality for super-pure water, tap water and water from the intake in Besko (Poland) before and after the process in the plasma reactor were presented for comparison. In addition, the <sup>17</sup>O NMR (the full width at half maximum) and electrospray ionization mass spectrometry (ESI MS) methods were used to determine differences in physicochemical parameters between the untreated and plasma-treated water. It has been established that the water subjected to plasma treatment shows much different gas absorption properties than the untreated water samples, as a function of temperature and pressure, in this paper we report exemplary data for CO<sub>2</sub>, oxygen and acetylene. The improved gas absorption properties of the plasma-treated water make it attractive for the use in industrial processes. It is worth pointing to a great capacity of the new reactor (4000 l/h), and low energy consumption (20 MJ/h) for the treatment of the above mentioned volume flow rate of water.展开更多
Industrial production series are volatile and often cyclical. Time series models can be used toestablish certain stylized facts, such as trends and cycles, which may be present in these series. Incertain situations, i...Industrial production series are volatile and often cyclical. Time series models can be used toestablish certain stylized facts, such as trends and cycles, which may be present in these series. Incertain situations, it is also possible that common factors, which may have an interesting interpretation,can be detected in production series. Series from two neighboring countries with close economicrelationships, such as Germany and Austria, are especially likely to exhibit such joint stylized facts.展开更多
To promote sustainability, it has become increasingly vital to properly account material and energy flows in industrial production processes. Therefore, a generic process-level input-output （IO） model was developed ...To promote sustainability, it has become increasingly vital to properly account material and energy flows in industrial production processes. Therefore, a generic process-level input-output （IO） model was developed to provide an integrated energy （material） accounting and analysis approach for industrial production processes. By extending the existing processlevel IO models, the production, usage, export and loss of by-products were explicitly considered in the proposed IO model. Moreover, the by-products allocation procedures were incorporated into the proposed IO model to reflect individual contributions of products to energy consumption. Finally, the proposed model enabled calculating embodied energy of main products and total energy consumption under hierarchical accounting scope. Plant managers, energy management consultants, governmental officials and academic researchers could use this input-output model to account material and energy flows, thus calculating energy consumption indicators of a production process with their specific system boundary requirements. The accounting results could be further used for energy labeling, identifying bottlenecks of production activities, evaluating industrial symbiosis effects, improving materials and energy utilization efficiency, etc. The model could also be used as a planning tool to determine the effect that a particular change of technology and supply chains may have on the industrial production processes. The proposed model was tested and applied in a real integrated steel mill, which also provided the reference results for related researches. At last, some concepts, computational issues and limi- tations of the proposed model were discussed.展开更多
Bioethanol is a renewable,clean energy and a very important basic chemical raw material,improving production efciency and reducing production cost are the goals pursued by ethanol enterprises.Adding acid protease in t...Bioethanol is a renewable,clean energy and a very important basic chemical raw material,improving production efciency and reducing production cost are the goals pursued by ethanol enterprises.Adding acid protease in the process of producing ethanol from grain will have many efects on fermentation,one of the most concerned efects is to increase liquor yield.Acid protease can hydrolyze the protein in cereals to produce free amino acids that can be used directly by yeast,thus reducing the amount of sugar consumed for amino acid metabolism,and allowing more sugar to be converted to ethanol.The application method and efect of acid protease in the industrial production of ethanol from corn were studied in this study,the results showed that the addition of acid protease at the dosage of 10 U/g(raw material)during yeast seeding could replace urea,promote yeast proliferation,reduce the infection rate,shorten the fermentation period by 7.5 h and increase the alcohol yield of raw materials by 0.33 percentage point.When acid protease was used in ethanol production line with an annual output of 180,000 tons,the net proft increased by at least US$4900/day compared with the control process.It is hoped that this study can lay a foundation for the application of acid protease in ethanol industry.展开更多
Textile industry, a major driver of the Chinese economy, has fallen victim to the global credit crisis and weaker demand. In the first two months, the output, sale, investment and export of textile industry grew at a ...Textile industry, a major driver of the Chinese economy, has fallen victim to the global credit crisis and weaker demand. In the first two months, the output, sale, investment and export of textile industry grew at a slower pace than last year. But things began to pick up after that as the economy slowly begins to recover since March. Signif icant gains at that time will be hard to come by, and won’t be nearly enough to prevent other sizeable slippage in overall textile and apparel activity.展开更多
It is important to revisit our plans and compare what was ideally targeted against what was actually achieved in implementation. In comparing the achievements with targets, strengths or weaknesses of established strat...It is important to revisit our plans and compare what was ideally targeted against what was actually achieved in implementation. In comparing the achievements with targets, strengths or weaknesses of established strategies can be accepted or corrections implemented since a plan also outlines some strategies for achieving the targets set. In this study, achievements in production and export of industrial forest products, i.e., sawn wood, plywood, chipboard and fibreboard, paper and paperboard and industrial round wood, are compared against targeted figures for 1996 for Tanzania. Discrepancies were obtained by subtracting targeted from achieved values and expressed both as absolute and relative differences in terms of the targeted values, with a negative sign for pro- duction where achievements were less than targets and a positive sign when achievements were higher than targets. Values achieved ranged from 4%-100% of the targeted values, depending on the product, and were only higher than the targeted value for industrial round wood. Possible causes of the discrepancies are inefficiency of parastatal companies, low private investment, sub-maximal in- dustrial operation and plant inefficiencies. Discrepancies could also result from unrealistic data used in planning due to difficulty in data availability and poor intra- and inter-sectoral coordination. The implications of these discrepancies are low contributions of the wood-based industry to the national economy, increased import substitution of wood-based products, increased socio-economic and environmental degradation and decreased integrity in planning and policy making.展开更多
The enhancement of industrial green total factor productivity is pivotal for achieving high-quality and sustainable economic development.This study assesses China’s performance using the SBM-GML model,employing provi...The enhancement of industrial green total factor productivity is pivotal for achieving high-quality and sustainable economic development.This study assesses China’s performance using the SBM-GML model,employing province-level panel data spanning from 2004 to 2020.Furthermore,we examine the influence of green finance and technological progress on industrial green total factor productivity using a spatial econometric model.The findings uncover that the relationship between the level of green financial development and industrial green total factor productivity follows a U-shaped curve.Initially,low levels of green financial development exert a suppressive effect on industrial green total factor productivity,proving ineffective in the short term.However,with the progression of green finance development,a positive and significant long-term impact on industrial green total factor productivity emerges.Moreover,technological progress demonstrates a noteworthy promotional effect on industrial green total factor productivity.The analysis delves deeper into revealing that industrial structure and environmental regulation intensity exhibit a significant negative relationship with industrial green total factor productivity.In contrast,both energy structure and education level showcase a substantial positive relationship with industrial green total factor productivity.展开更多
Phanerochaete chrysosporium was selected as the production strain of laccase,and the effects of stirring speed,ventilation volume,culture temperature,inoculation amount and initial p H of medium on laccase production ...Phanerochaete chrysosporium was selected as the production strain of laccase,and the effects of stirring speed,ventilation volume,culture temperature,inoculation amount and initial p H of medium on laccase production by liquid fermentation in cylinder were studied. On the basis of single factor test,an orthogonal test was carried out to find optimal conditions for laccase production P. chrysosporium through liquid fermentation. These results showed that the stirring speed of fermentation cylinder had the highest effect on laccase production,and the optimal conditions were shown as follows： the temperature at 28 ℃,the rotating speed at 300 r/min,the ventilation volume of 5 L/min（ ventilation ratio of 1.0 vvm）,the initial p H of medium of 5,and the inoculation amount of 15%,which gave the highest laccase level of 14. 86 U/ml.展开更多
With the rapid development of foreign trade in China, industrial import and export has been an absolute subject in recent years. The huge trade surplus of import and export trade of industrial products brings not only...With the rapid development of foreign trade in China, industrial import and export has been an absolute subject in recent years. The huge trade surplus of import and export trade of industrial products brings not only high profits, but also pollution costs as well. Based on the concept of water pollution footprints(WPFs), this study applies the input-output method and calculates pollutant-producing coefficients of 20 major industrial sectors in China and investigates the WPFs caused by the import and export trades of these industrial sectors. The research results show that WPF resulting from exports exceeds that of imports from 2011 to 2015 in China. The net inflow of pollution footprint is mainly from paper mills, printing and stationery manufacturing, and textile industry; whereas a great number of WPFs are transferred to other countries by these sectors,such as metal mining and dressing industry and oil and natural gas exploitation industry.展开更多
The Jiangsu Light Industrial Products Import and Export (Holding) Corporation Ltd is the first provincial specialized foreign trade corporation in the economic and trade system of Jiangsu Province to practice the hold...The Jiangsu Light Industrial Products Import and Export (Holding) Corporation Ltd is the first provincial specialized foreign trade corporation in the economic and trade system of Jiangsu Province to practice the holding system. After adopting the holding system in 1993, the corporation saw a total import and export volume of US $ 270 million in that year, with展开更多
The Xiangfan-based Industrial Products Branch of theInternational Trade Corporation in Hubei Province,specializing in the import and trade of industrial products andState-run foreign trade, was founded in 1984. In the...The Xiangfan-based Industrial Products Branch of theInternational Trade Corporation in Hubei Province,specializing in the import and trade of industrial products andState-run foreign trade, was founded in 1984. In the past decadesince its founding, it has explored domestic and world marketsand seen rapid growth in the volume of import and export foreigntrade, registering RMB60 million in annual trade and US＄6million in export earnings. The corporation’s business scope includes light industrialproducts such as paper, cases and bags, canvas bags, enamelware, aluminium ware, bicycles, quartz clocks, detergent, laborprotection gloves, batteries for everyday use, storage展开更多
The Beijing Light Industrial Products Import and Export Corporation is under the Beijing Municipal Foreign Economic and Trade Commission. It is a state-owned specialized foreign trading corporation founded in 1964. Th...The Beijing Light Industrial Products Import and Export Corporation is under the Beijing Municipal Foreign Economic and Trade Commission. It is a state-owned specialized foreign trading corporation founded in 1964. Through constant development and growth, the corporation has established business relations with over 2,000 customers in over 100 countries and regions worldwide. Domestically,展开更多
With the continuous development and progress of China’s industry,it has become the only country in the world that has all the industrial categories in the United Nations Industrial Classification.China’s industrial ...With the continuous development and progress of China’s industry,it has become the only country in the world that has all the industrial categories in the United Nations Industrial Classification.China’s industrial products have gradually changed from“Made in China”to“Design in China”.The integration of Chinese national cultural elements into industrial product design has also become the future development trend in the field of design.This paper will analyze the application of national culture in industrial product design,and discuss how to better integrate the two with practical cases to promote the continuous development of the industry.展开更多
Background:The simplest and most convenient food technology is the using of dry composite mixtures.They have a lot of advantages.Dry composite mixtures,which would completely be the basis for the production of persona...Background:The simplest and most convenient food technology is the using of dry composite mixtures.They have a lot of advantages.Dry composite mixtures,which would completely be the basis for the production of personalized food concentrates,are not represented.The development of such dry composite mixtures is actual and of scientific and practical interest.The purpose of this research is the selection and justification of local import-substituting raw materials components for dry composite mixtures used as the basis for the production of food concentrates.As the objects of research,the raw materials components of the starch,fruit and vegetable,industry were selected.The work uses currently accepted standard research methods for organoleptic and physic-chemical parameters of raw materials components.The research was carried out within of the project“Theoretical Substantiation of Production Technology and the Development of Import-Substituting Food Products of Functional Purpose Based on Dry Composite Mixtures”,funded by the Belarusian Republican Foundation for Basic Research.Based on the researches,it was found out that in the composition of dry composite mixtures for the production of food concentrates it is expedient to use the following raw materials:potato starch,extruded corn starch,dried carrots,dried beets,dried topinambur and dried apples in chopped form.展开更多
文摘The paper presents a flow plasma reactor permitting modification of the properties of water/aqueous solutions by stochastic resonance amplification of vibrations of selected chemical species in water with electromagnetic noise generated during a plasma discharge. The main parameters characterizing the quality for super-pure water, tap water and water from the intake in Besko (Poland) before and after the process in the plasma reactor were presented for comparison. In addition, the <sup>17</sup>O NMR (the full width at half maximum) and electrospray ionization mass spectrometry (ESI MS) methods were used to determine differences in physicochemical parameters between the untreated and plasma-treated water. It has been established that the water subjected to plasma treatment shows much different gas absorption properties than the untreated water samples, as a function of temperature and pressure, in this paper we report exemplary data for CO<sub>2</sub>, oxygen and acetylene. The improved gas absorption properties of the plasma-treated water make it attractive for the use in industrial processes. It is worth pointing to a great capacity of the new reactor (4000 l/h), and low energy consumption (20 MJ/h) for the treatment of the above mentioned volume flow rate of water.
文摘Industrial production series are volatile and often cyclical. Time series models can be used toestablish certain stylized facts, such as trends and cycles, which may be present in these series. Incertain situations, it is also possible that common factors, which may have an interesting interpretation,can be detected in production series. Series from two neighboring countries with close economicrelationships, such as Germany and Austria, are especially likely to exhibit such joint stylized facts.
文摘To promote sustainability, it has become increasingly vital to properly account material and energy flows in industrial production processes. Therefore, a generic process-level input-output （IO） model was developed to provide an integrated energy （material） accounting and analysis approach for industrial production processes. By extending the existing processlevel IO models, the production, usage, export and loss of by-products were explicitly considered in the proposed IO model. Moreover, the by-products allocation procedures were incorporated into the proposed IO model to reflect individual contributions of products to energy consumption. Finally, the proposed model enabled calculating embodied energy of main products and total energy consumption under hierarchical accounting scope. Plant managers, energy management consultants, governmental officials and academic researchers could use this input-output model to account material and energy flows, thus calculating energy consumption indicators of a production process with their specific system boundary requirements. The accounting results could be further used for energy labeling, identifying bottlenecks of production activities, evaluating industrial symbiosis effects, improving materials and energy utilization efficiency, etc. The model could also be used as a planning tool to determine the effect that a particular change of technology and supply chains may have on the industrial production processes. The proposed model was tested and applied in a real integrated steel mill, which also provided the reference results for related researches. At last, some concepts, computational issues and limi- tations of the proposed model were discussed.
文摘Bioethanol is a renewable,clean energy and a very important basic chemical raw material,improving production efciency and reducing production cost are the goals pursued by ethanol enterprises.Adding acid protease in the process of producing ethanol from grain will have many efects on fermentation,one of the most concerned efects is to increase liquor yield.Acid protease can hydrolyze the protein in cereals to produce free amino acids that can be used directly by yeast,thus reducing the amount of sugar consumed for amino acid metabolism,and allowing more sugar to be converted to ethanol.The application method and efect of acid protease in the industrial production of ethanol from corn were studied in this study,the results showed that the addition of acid protease at the dosage of 10 U/g(raw material)during yeast seeding could replace urea,promote yeast proliferation,reduce the infection rate,shorten the fermentation period by 7.5 h and increase the alcohol yield of raw materials by 0.33 percentage point.When acid protease was used in ethanol production line with an annual output of 180,000 tons,the net proft increased by at least US$4900/day compared with the control process.It is hoped that this study can lay a foundation for the application of acid protease in ethanol industry.
文摘Textile industry, a major driver of the Chinese economy, has fallen victim to the global credit crisis and weaker demand. In the first two months, the output, sale, investment and export of textile industry grew at a slower pace than last year. But things began to pick up after that as the economy slowly begins to recover since March. Signif icant gains at that time will be hard to come by, and won’t be nearly enough to prevent other sizeable slippage in overall textile and apparel activity.
文摘It is important to revisit our plans and compare what was ideally targeted against what was actually achieved in implementation. In comparing the achievements with targets, strengths or weaknesses of established strategies can be accepted or corrections implemented since a plan also outlines some strategies for achieving the targets set. In this study, achievements in production and export of industrial forest products, i.e., sawn wood, plywood, chipboard and fibreboard, paper and paperboard and industrial round wood, are compared against targeted figures for 1996 for Tanzania. Discrepancies were obtained by subtracting targeted from achieved values and expressed both as absolute and relative differences in terms of the targeted values, with a negative sign for pro- duction where achievements were less than targets and a positive sign when achievements were higher than targets. Values achieved ranged from 4%-100% of the targeted values, depending on the product, and were only higher than the targeted value for industrial round wood. Possible causes of the discrepancies are inefficiency of parastatal companies, low private investment, sub-maximal in- dustrial operation and plant inefficiencies. Discrepancies could also result from unrealistic data used in planning due to difficulty in data availability and poor intra- and inter-sectoral coordination. The implications of these discrepancies are low contributions of the wood-based industry to the national economy, increased import substitution of wood-based products, increased socio-economic and environmental degradation and decreased integrity in planning and policy making.
基金General Research Fund of Philosophy and Social Sciences in Colleges and Universities of Jiangsu Province in 2020(Grant Number 2020SJA1008)Fundamental Research Funds for the Central Universities(Grant Number 2023SK04)。
文摘The enhancement of industrial green total factor productivity is pivotal for achieving high-quality and sustainable economic development.This study assesses China’s performance using the SBM-GML model,employing province-level panel data spanning from 2004 to 2020.Furthermore,we examine the influence of green finance and technological progress on industrial green total factor productivity using a spatial econometric model.The findings uncover that the relationship between the level of green financial development and industrial green total factor productivity follows a U-shaped curve.Initially,low levels of green financial development exert a suppressive effect on industrial green total factor productivity,proving ineffective in the short term.However,with the progression of green finance development,a positive and significant long-term impact on industrial green total factor productivity emerges.Moreover,technological progress demonstrates a noteworthy promotional effect on industrial green total factor productivity.The analysis delves deeper into revealing that industrial structure and environmental regulation intensity exhibit a significant negative relationship with industrial green total factor productivity.In contrast,both energy structure and education level showcase a substantial positive relationship with industrial green total factor productivity.
基金Supported by Project of Jiangsu Agri-Animal Husbandry Vocational College(NSFPT201601)
文摘Phanerochaete chrysosporium was selected as the production strain of laccase,and the effects of stirring speed,ventilation volume,culture temperature,inoculation amount and initial p H of medium on laccase production by liquid fermentation in cylinder were studied. On the basis of single factor test,an orthogonal test was carried out to find optimal conditions for laccase production P. chrysosporium through liquid fermentation. These results showed that the stirring speed of fermentation cylinder had the highest effect on laccase production,and the optimal conditions were shown as follows： the temperature at 28 ℃,the rotating speed at 300 r/min,the ventilation volume of 5 L/min（ ventilation ratio of 1.0 vvm）,the initial p H of medium of 5,and the inoculation amount of 15%,which gave the highest laccase level of 14. 86 U/ml.
文摘With the rapid development of foreign trade in China, industrial import and export has been an absolute subject in recent years. The huge trade surplus of import and export trade of industrial products brings not only high profits, but also pollution costs as well. Based on the concept of water pollution footprints(WPFs), this study applies the input-output method and calculates pollutant-producing coefficients of 20 major industrial sectors in China and investigates the WPFs caused by the import and export trades of these industrial sectors. The research results show that WPF resulting from exports exceeds that of imports from 2011 to 2015 in China. The net inflow of pollution footprint is mainly from paper mills, printing and stationery manufacturing, and textile industry; whereas a great number of WPFs are transferred to other countries by these sectors,such as metal mining and dressing industry and oil and natural gas exploitation industry.
文摘The Jiangsu Light Industrial Products Import and Export (Holding) Corporation Ltd is the first provincial specialized foreign trade corporation in the economic and trade system of Jiangsu Province to practice the holding system. After adopting the holding system in 1993, the corporation saw a total import and export volume of US $ 270 million in that year, with
文摘The Xiangfan-based Industrial Products Branch of theInternational Trade Corporation in Hubei Province,specializing in the import and trade of industrial products andState-run foreign trade, was founded in 1984. In the past decadesince its founding, it has explored domestic and world marketsand seen rapid growth in the volume of import and export foreigntrade, registering RMB60 million in annual trade and US＄6million in export earnings. The corporation’s business scope includes light industrialproducts such as paper, cases and bags, canvas bags, enamelware, aluminium ware, bicycles, quartz clocks, detergent, laborprotection gloves, batteries for everyday use, storage
文摘The Beijing Light Industrial Products Import and Export Corporation is under the Beijing Municipal Foreign Economic and Trade Commission. It is a state-owned specialized foreign trading corporation founded in 1964. Through constant development and growth, the corporation has established business relations with over 2,000 customers in over 100 countries and regions worldwide. Domestically,
基金Tutor system research project of Huashang School of Guangdong University of Finance and Economics(Number:2019HSDS21).
文摘With the continuous development and progress of China’s industry,it has become the only country in the world that has all the industrial categories in the United Nations Industrial Classification.China’s industrial products have gradually changed from“Made in China”to“Design in China”.The integration of Chinese national cultural elements into industrial product design has also become the future development trend in the field of design.This paper will analyze the application of national culture in industrial product design,and discuss how to better integrate the two with practical cases to promote the continuous development of the industry.
文摘Background:The simplest and most convenient food technology is the using of dry composite mixtures.They have a lot of advantages.Dry composite mixtures,which would completely be the basis for the production of personalized food concentrates,are not represented.The development of such dry composite mixtures is actual and of scientific and practical interest.The purpose of this research is the selection and justification of local import-substituting raw materials components for dry composite mixtures used as the basis for the production of food concentrates.As the objects of research,the raw materials components of the starch,fruit and vegetable,industry were selected.The work uses currently accepted standard research methods for organoleptic and physic-chemical parameters of raw materials components.The research was carried out within of the project“Theoretical Substantiation of Production Technology and the Development of Import-Substituting Food Products of Functional Purpose Based on Dry Composite Mixtures”,funded by the Belarusian Republican Foundation for Basic Research.Based on the researches,it was found out that in the composition of dry composite mixtures for the production of food concentrates it is expedient to use the following raw materials:potato starch,extruded corn starch,dried carrots,dried beets,dried topinambur and dried apples in chopped form.
