Aero-engine hollow turbine blades are work under prolonged high temperature,requiring high dimensional accuracy.Blade profile and wall thickness are important parameters to ensure the comprehensive performance of blad...Aero-engine hollow turbine blades are work under prolonged high temperature,requiring high dimensional accuracy.Blade profile and wall thickness are important parameters to ensure the comprehensive performance of blades,which need to be measured accurately during manufacturing process.In this study,a high accuracy industrial computed tomography(ICT)measuring method was developed based on standard cylindrical pin and ring workpieces of different sizes.Combining ICT with cubic spline interpolation,a sub-pixel accuracy was achieved in measuring the dimension of component.Compared with the traditional and whole-pixel level image measurement method,the cubic spline interpolation algorithm has the advantages of high accuracy in image edge detection and thus high accuracy of dimensional measurement.Further,the technique was employed to measure the profile and wall thickness of a typical aerospace engine turbine blade,and an accuracy higher than 0.015 mm was obtained.展开更多
The wide application of new information and communication technologies(ICTs)has been argued to be critical in local economic development,while the application of new ICTs will affect the development of industrial clus...The wide application of new information and communication technologies(ICTs)has been argued to be critical in local economic development,while the application of new ICTs will affect the development of industrial cluster,especially those small and medium-sized enterprises(SMEs).This paper examines Yangxunqiao textile cluster located in Zhejiang Province as a case study to focus on the role of ICTs in the sustainable development.We argue ICTs application in firms boost flexible and customized production approach,improve e-commerce market channel and raise supply chain management.We also pay special attention to the spatial implication of ICTs adoption in industrial cluster,and suggest that application of ICTs tend to lead to further clustering of SMEs in the location with mature production chain.Our analysis shows that new ICTs are a facilitator in the sustainable development of the industrial cluster.展开更多
The recent increasing use of γ-rays industrial computed tomography(γ-rays ICT) in various fields has induced greater attention to its performance as well as to considerations of radiation safety. It is understood th...The recent increasing use of γ-rays industrial computed tomography(γ-rays ICT) in various fields has induced greater attention to its performance as well as to considerations of radiation safety. It is understood that radiation protection planning cannot be sacrificed for the sake of CT image quality during the design, manufacture,and layout of γ-rays ICT systems. In the present work, we describe a typical γ-rays ICT system in brief, and, based on experience and pertinent examples, we propose design requirements for ensuring the radiation safety of the sealed radioactive source, source container, and workspace. The design examples and dose rate measurement results illustrate that the proposed design standards are reasonable,feasible, and safe, and are therefore meaningful for the design, manufacture, and layout of γ-rays ICT systems. This paper discussed the predominant measures associated with the radiation protection of γ-rays ICT systems in accordance with the pertinent Chinese standards. In addition, based on experience and pertinent examples, the design requirements for ensuring the radiation safety of a sealed radioactive source, source container, and workspace were defined in detail. The design examples and dose rate measurements conducted in conjunction with a γ-rays ICT system and workspace employing the proposed design standards have illustrated that the proposals provided in this paper are reasonable, feasible, and safe, and are therefore meaningful for the design, manufacture, and layout of γ-rays ICT systems.展开更多
In order to analyze the technical structure and international comparative advantage of the information and communication technology(ICT)manufacturing industry,a complete set of ICT manufacturing product categories has...In order to analyze the technical structure and international comparative advantage of the information and communication technology(ICT)manufacturing industry,a complete set of ICT manufacturing product categories has been constructed by matching National Economical Industry Classification(GB/T4754-2017)with Harmonized System(HS)Codes,based on the relevant definitions in International Standard Industrial Classification(ISIC).The proposed definition overcomes inherent defects such as inaccurate scopes,lagging data and rough categories,which are characterized by commonly utilized product-level based classification approaches.Within the given framework,this paper has designed the technology content related indicators from the perspective of production distribution,and divided ICT product categories into high-end,medium-end and lowend manufacturing classifications according to respective global shares.Then,we have calculated international market shares(IMS),revealed comparative advantages(RCA),and market penetration rates(MPR)of ICT manufacturing exports for major economies from 2010 to 2021.Finally,development characterizations of ICT manufacturing industries for China’s Mainland are analyzed,and several practical suggestions are provided.展开更多
基金financially supported by the National Science and Technology Major Project "Aero Engine and Gas Turbine"(No.2017-Ⅶ-0008-0102)National Nature Science Foundation of China (No.51701112 and No.51690162)+1 种基金Shanghai Rising-Star Program (No.20QA1403800 and No.21QC1401500)Shanghai Science and Technology Committee (No.21511103600)
文摘Aero-engine hollow turbine blades are work under prolonged high temperature,requiring high dimensional accuracy.Blade profile and wall thickness are important parameters to ensure the comprehensive performance of blades,which need to be measured accurately during manufacturing process.In this study,a high accuracy industrial computed tomography(ICT)measuring method was developed based on standard cylindrical pin and ring workpieces of different sizes.Combining ICT with cubic spline interpolation,a sub-pixel accuracy was achieved in measuring the dimension of component.Compared with the traditional and whole-pixel level image measurement method,the cubic spline interpolation algorithm has the advantages of high accuracy in image edge detection and thus high accuracy of dimensional measurement.Further,the technique was employed to measure the profile and wall thickness of a typical aerospace engine turbine blade,and an accuracy higher than 0.015 mm was obtained.
基金supported by the National Natural Science Foundation of China(Grant No.40571047)Beijing Municipal Science&Technology Commission(Grant No.ZZ0860)
文摘The wide application of new information and communication technologies(ICTs)has been argued to be critical in local economic development,while the application of new ICTs will affect the development of industrial cluster,especially those small and medium-sized enterprises(SMEs).This paper examines Yangxunqiao textile cluster located in Zhejiang Province as a case study to focus on the role of ICTs in the sustainable development.We argue ICTs application in firms boost flexible and customized production approach,improve e-commerce market channel and raise supply chain management.We also pay special attention to the spatial implication of ICTs adoption in industrial cluster,and suggest that application of ICTs tend to lead to further clustering of SMEs in the location with mature production chain.Our analysis shows that new ICTs are a facilitator in the sustainable development of the industrial cluster.
文摘The recent increasing use of γ-rays industrial computed tomography(γ-rays ICT) in various fields has induced greater attention to its performance as well as to considerations of radiation safety. It is understood that radiation protection planning cannot be sacrificed for the sake of CT image quality during the design, manufacture,and layout of γ-rays ICT systems. In the present work, we describe a typical γ-rays ICT system in brief, and, based on experience and pertinent examples, we propose design requirements for ensuring the radiation safety of the sealed radioactive source, source container, and workspace. The design examples and dose rate measurement results illustrate that the proposed design standards are reasonable,feasible, and safe, and are therefore meaningful for the design, manufacture, and layout of γ-rays ICT systems. This paper discussed the predominant measures associated with the radiation protection of γ-rays ICT systems in accordance with the pertinent Chinese standards. In addition, based on experience and pertinent examples, the design requirements for ensuring the radiation safety of a sealed radioactive source, source container, and workspace were defined in detail. The design examples and dose rate measurements conducted in conjunction with a γ-rays ICT system and workspace employing the proposed design standards have illustrated that the proposals provided in this paper are reasonable, feasible, and safe, and are therefore meaningful for the design, manufacture, and layout of γ-rays ICT systems.
文摘In order to analyze the technical structure and international comparative advantage of the information and communication technology(ICT)manufacturing industry,a complete set of ICT manufacturing product categories has been constructed by matching National Economical Industry Classification(GB/T4754-2017)with Harmonized System(HS)Codes,based on the relevant definitions in International Standard Industrial Classification(ISIC).The proposed definition overcomes inherent defects such as inaccurate scopes,lagging data and rough categories,which are characterized by commonly utilized product-level based classification approaches.Within the given framework,this paper has designed the technology content related indicators from the perspective of production distribution,and divided ICT product categories into high-end,medium-end and lowend manufacturing classifications according to respective global shares.Then,we have calculated international market shares(IMS),revealed comparative advantages(RCA),and market penetration rates(MPR)of ICT manufacturing exports for major economies from 2010 to 2021.Finally,development characterizations of ICT manufacturing industries for China’s Mainland are analyzed,and several practical suggestions are provided.