Overview of Industrial Materials Detection Based on Prompt Gamma Neutron Activation Analysis Technology

Prompt gamma neutron activation analysis (PGNAA) is a non-destructive online measurement nuclear analysis method. With its unique advantages, it has been widely used in online analysis of industrial materials such as coal, cement, and minerals in recent years. However, there are many kinds of literature on PGNAA in the field of industrial materials detection, and there are still a few concluding articles. To this end, based on the principle of PGNAA online analysis, the status quo and development of the real-time online detection of industrial material components in the field are reviewed and discussed by consulting a large number of domestic and foreign PGNAA related literature and data, to facilitate the reference of relevant scientific researchers.

A Comparative Investigation of the Biodegradation Behaviour of Linseed Oil-Based Cross-Linked Composites Filled with Industrial Waste Materials in Two Different Soils

The biodegradation of polymeric biocomposites formed from epoxidized linseed oil and various types of fillers(pine needles,pine bark,grain mill waste,rapeseed cake)and a control sample without filler was studied during 180 days of exposure to two types of forest soil:deciduous and coniferous.The weight loss,morphological,and structural changes of polymer composites were noticed after 180 days of the soil burial test.The greatest weight loss of all tested samples was observed in coniferous forest soil(41.8%–63.2%),while in deciduous forest soil,it ranged between 37.7%and 42.3%.The most significant changes in the intensities of the signals evaluated by attenuated total reflectance infrared spectroscopy,as well as morphological changes determined by scanning electron microscopy,were assessed for polymer composite with rapeseed cake and specimen without filler in coniferous forest soil and are in a good agreement with weight loss results.Whereas significantly lower changes in weight loss,morphology,and structure of polymeric film with pine bark were noticed in both soils.It was suggested that fungi of Trichoderma,Penicillium,Talaromyces and Clonostachys genera are the possible soil microorganisms that degrade linseed oil-based cross-linked polymer composites.Moreover,the novel polymer composites have the potential to be an environmentally friendly alternative to petroleum-based mulching films.

Basic Characteristics of an Appropriate Waste Fillers for Solvent Free and Water-Borne Industrial Polymer Floors and Their Utilization

Recently the manufacture of epoxy coating and flooring materials begun to be under strong pressure to use more environmentally friendly raw materials in its composition.First tendency to reduce of solvents and diluents contained in the materials appeared at the end of 90´s.This situation was supported by the Council of Europe in 2004 to reduce VOC emissions to zero till 2020.Solvent materials were thus largely replaced by solvent free materials from which the volatile substances are not released into the air.But pressure continued to increase,and over the past decade began to take centre stage water-based epoxy.On the Czech market solvent based material is still occasionally used,but predominant are solvent free materials.There are no commonly used materials containing wastes as fillers in new water-borne and solvent-free epoxy materials.Characteristics identification of the waste material as a potential filler is a set of properties that determine the limits of secondary raw materials or waste as a filler.This paper describes the basic characteristics which must be selected to meet the requirements,to affect negatively the workability,sedimentation,properties and behavior of the final floor system.Some materials must comply with special requirements,such as resistance to chemicals,etc.Next part of paper talks about utilization of polymer floors and their mechanical properties.

Some Problems of Recycling Industrial Materials

The industrial system should learn from the natural ecosystem. The resource utilization efficiency should be increased and the environmental load should be decreased, depending on the materials recycled in the system. The classification of industrial materials from the viewpoint of large-scale recycling was stated. Recycling of materials, on three different levels, was introduced in the industrial system. The metal flow diagram in the life cycle of products, in the case of no materials recycled, materials partially recycled, and materials completely recycled, was given. The natural resource conservation and the waste emission reduction were analyzed under the condition of materials completely recycled. The expressions for the relation between resource efficiency and material recycling rate, and the relation between eco-efficiency and material recycling rate were derived, and the curves describing the relationship between them were protracted. The diagram of iron flow in the life cycle of iron and steel products in China, in 2001, was given, and the iron resource efficiency, material recycling rate, and iron eco-efficiency were analyzed. The variation of iron resource efficiency with the material recycling rate was analyzed for two different production ratios.

Research on the Mechanism and Strategy of Equity Investment Driving the Transformation of New Material Innovation Achievements

Under the wave of global technological revolution,the new materials industry is facing difficulties in innovation and transformation.Equity investment has become a key driving force due to its flexible mechanism,risk sharing,and deep participation.Based on introducing the current development status of China’s new materials industry,this article reveals the mechanism of equity investment in financial support,risk management,incentive constraints,and resource integration.The article proposes optimization strategies,such as building an information-sharing mechanism and a diversified investment fund system,to promote the high-quality development of the new materials industry driven by innovation and provide strategic guidance for policymakers,investors,and enterprises.

High-Performance Fiber Compound Material to be Industrialized

Chinese top planner-State Development and Reform Commission,has decided to organize and coordinate an implementation of a special project for high tech industrialization of fiber-reinforced compound materials in 2008 up to 2009.The decision has recently been issued in its national circular(doc. 3177,Yr.2007)to call for local enterprises to apply for this special project support.

China's Building Materials Industry

China’s building materials industry experienced great development in 1993 with rapid increases in production and record output and profits. The industry produced 360 million tons of cement, 96.163 million cases of plate glass, 20.4 million pieces of sanitation ceramics and 173 million square metres of construction ceramics, showing rises of 12.89, 12.83, 123.8 and 127 percent respectively over the previous year. The output of cement and

Running States of China's Iron & Steel,Nonferrous,and Building Materials Industries in 2012

Iron ＆ Steel Industry China＇s outputs of crude steel, steel products, coke and ferrous alloys in 2012 were 716.54 million tons （up 3.1% YOY）, 051.86 million tons （up 7.7% YOY）, 443.23 million tons （up 5.2% YOY） and 31.29 million tons （up 15% YOY）,

Beijing Huade Sealing Material Industrial Co.Ltd.

The Beijing Huade Sealing Material Industrial Corporation, Ltd. is a joint venture between the Beijing Hua Xin Development Company of the Beijing Chemical Group Corporation and a metal printing company based in Singapore. The corporation specializes in producing sealing material for metal packing pails.

Soil Improvement Using Waste Materials:A Review

With the industrialisation,industrial byproducts are produced in large quantities and create nuisance to natural habitats.The disposal of these wastes like fly ash,marble powder,construction and demolition(C&D)waste,brick powder,agricultural wastes etc.has become the potential threat to the ecosystem and need some real solutions.The direct disposal of such wastes into open land or water bodies causes circumambient pollution.One of the potential solutions is to utilise these wastes in the construction industry on large scale as subgrade rehab or additive to cement based materials.In the present study,the compaction and strength characteristics of stabilised soil have been studied by using various waste materials i.e.lime,cement,plastic waste,industrial waste,fibre,mushroom waste,wet olive pomace etc.and reviewed.The addition of additives improved the engineering properties of soil significantly.

Running State of China's Building Materials Industry in 2013

In 2013, China＇s outputs of cement and flat glass were 2. 414 billion tons and 778.98 million weight cases, increasing by 9.6% and 11.2% YOY, respectively.

Direct-bonded Magnesite-Chrome Bricks for Kilns and Furnaces of Building Materials Industry

JC 497-92 (96)1 Contents and Applied ScopeThis standard specifies the classification, shapes and dimensions, technical requirements, test methods, inspection rules, marking, packing, transportation, storage and quality certificate of direct-bonded magnesite-chrome bricks for building materials industry. This standard is applicable to the direct-bonded magnesite-chrome bricks for cement kiln, glass melting tank and other industrial furnaces.2 Normative ReferencesGB 2997: Test method for the apparent porosity, water absorption, bulk density and true porosity of dense shaped refractory productsGB 5070: Chemical analysis method for magnesite-Chrome refractoriesGB 5072: Test method for cold crushing strength of dense shaped refractory productsGB 5989: Test method for refractoriness under load of dense shaped refractory products (Differential, with rising temperature)GB 7320: Test method for thermal expansion of refractory productsGB 7321: Sample preparation for testing of dense shaped refractory productsGB 10324: Type definition of refractory productsGB 10325: Piling, sampling, acceptance, storage and transportation of refractory products

Chinese Advanced Materials Industry Grows Rapidly

Revealed from "2005 China Annual Market Conference of Advanced Materials", the advanced materials industry in China grows rapidly, with market scale RMB ￥18.01 billion, increasing 27.7% over last year. By now, total 79 production bases of advanced materials have been built in China and constellation effect of rare earth industry has emerged. Beijing, Shenzhen and Shanghai have been developed

Statistical data of Printing and Printing Equipment Industries and materials of China 2007

According to statistics of Printing and Printing Equipment Industries Association of China (PEIAC), the total output value of printing industry of China in 2007 reached 440 billion RMB , the total output value of printing equipment was

Advances in the treatment of multi-pollutant flue gas in China's building materials industry

In most of the world’s building material industries,the control of flue gas pollutants mainly focuses on a single pollutant.However,given the large capacity and high contribution of China’s building materials industry to global air pollution,the need to develop multipollutant emission reduction technology is urgent.Recently,China has focused on reducing the emissions of flue gas pollutants in the building materials industry,established many key research and development projects,and gradually implemented more stringent pollutant emission limits.This project focuses on the most recent advances in flue gas emission control technology in China’s building materials industry,including denitration,dust removal,desulfurization,synergistic multi-pollutant emission reduction,and the construction of pilot research and demonstration projects for pollutant removal in several building material industries.On this basis,revised pollutant limits in flue gas emitted in China’s building material industry are proposed.

Semi-flowable self-consolidating concrete using industrial wastes for construction of rigid pavements in India:An overview

The construction of rigid pavements using conventionally vibrated concrete consumes a significant amount of energy as it requires rigorous vibrations.This also requires a high number of laborers and creates noise during construction.Thus,a new kind of concrete called semi-flowable self-consolidating concrete(SFSCC)for pavement construction using slip-form paving technology is reviewed in this article.The SFSCC requires no energy for compaction as it gets compacted under its self weight.It also renders shape stability in the fresh state which is critical to expedite the construction in slip form concreting.The review focuses on the need,evolution,and requirement of the ingredient materials,mix design,and methods for testing the properties of SFSCC.Further,the utilization of industrial wastes in the construction industry and the production of self-consolidating concrete are discussed.The literature on the effect of different materials on the properties of such concrete and field studies in this context are discussed.Lastly,its suitability as pavement construction material either in normal rural roads or in low-volume village roads is discussed in the Indian context.The review reveals that relatively less amount of study on SFSCC in general and as a pavement material in particular is available in the literature and pursuant to this,creates a wide scope of research.

Development during last 30 years' reform and opening up in China's printing,printing equipment and material industries(Ⅰ)

As the industry of knowledge diffusion and civilization spreading, printing industry has been paid much attention by Party and Government.