The Yutu-2 rover onboard the Chang’E-4 mission performed the first lunar penetrating radar detection on the farside of the Moon.The high-frequency channel presented us with many unprecedented details of the subsurfac...The Yutu-2 rover onboard the Chang’E-4 mission performed the first lunar penetrating radar detection on the farside of the Moon.The high-frequency channel presented us with many unprecedented details of the subsurface structures within a depth of approximately 50 m.However,it was still difficult to identify finer layers from the cluttered reflections and scattering waves.We applied deconvolution to improve the vertical resolution of the radar profile by extending the limited bandwidth associated with the emissive radar pulse.To overcome the challenges arising from the mixed-phase wavelets and the problematic amplification of noise,we performed predictive deconvolution to remove the minimum-phase components from the Chang’E-4 dataset,followed by a comprehensive phase rotation to rectify phase anomalies in the radar image.Subsequently,we implemented irreversible migration filtering to mitigate the noise and diminutive clutter echoes amplified by deconvolution.The processed data showed evident enhancement of the vertical resolution with a widened bandwidth in the frequency domain and better signal clarity in the time domain,providing us with more undisputed details of subsurface structures near the Chang’E-4 landing site.展开更多
To improve our understanding of the formation and evolution of the Moon, one of the payloads onboard the Chang＇e-3 （CE-3） rover is Lunar Penetrating Radar （LPR）. This investigation is the first attempt to explore...To improve our understanding of the formation and evolution of the Moon, one of the payloads onboard the Chang＇e-3 （CE-3） rover is Lunar Penetrating Radar （LPR）. This investigation is the first attempt to explore the lunar subsurface structure by using ground penetrating radar with high resolution. We have probed the subsur- face to a depth of several hundred meters using LPR. In-orbit testing, data processing and the preliminary results are presented. These observations have revealed the con- figuration of regolith where the thickness of regolith varies from about 4 m to 6 m. In addition, one layer of lunar rock, which is about 330 m deep and might have been accumulated during the depositional hiatus of mare basalts, was detected.展开更多
This paper presented an investigation of particle collision and penetration using the discrete element method to understand the motion of particles and improve theoretical treatment in the sieving process. The process...This paper presented an investigation of particle collision and penetration using the discrete element method to understand the motion of particles and improve theoretical treatment in the sieving process. The process progressively was divided into looseness, stratification, collision, and penetration. Particle penetration has a direct effect on the screening performance. The penetration probability was defined, and the mathematical relationships between particle penetration and vibration parameters were established using the least squares method. To obtain the ideal penetration probability for materials the amplitude and frequency should preferably be near 3.0 mm and 25 Hz, respectively. The vibration direction angle has only a slight effect on penetration. The stage of the screening process from 0.1 to 0.7 s is the primary region for collision and penetration. This paper focused on the sieving process to more fully understand how particle collision and penetration influence the screening efficiency.展开更多
To resolve the data combination of Phased-array Ground Penetrating Radar (PAGPR), we first build a model of PAGPR and a layered model, and then a new data combination algorithm is presented based on it. This method ca...To resolve the data combination of Phased-array Ground Penetrating Radar (PAGPR), we first build a model of PAGPR and a layered model, and then a new data combination algorithm is presented based on it. This method calculates time delay of multi-receivers, basing on the signal of the nearest receiver, then shifts other signals and adds them up, and gets one signal at last. It has been proved that this method can restrain noise, multiple waves, clutter waves and improve the precision of time location. In the end, an example is given to prove the method's efficiency.展开更多
The purpose of this study is to apply process mineralogy as a practical tool to further understand and analyze the reasons for low leaching rates in the curing-leaching process of vanadium-bearing stone coal and to fi...The purpose of this study is to apply process mineralogy as a practical tool to further understand and analyze the reasons for low leaching rates in the curing-leaching process of vanadium-bearing stone coal and to find a solution or improvement to optimize the leaching index.Using vanadium-bearing stone coal with the V2O5 mass fraction of 0.88%as the research object,the effects of particle size,mineral composition,and sulfuric acid curing on the feed,intermediate,and final products of curing-leaching were analyzed.The main vanadium-bearing minerals in the feed samples included sericite/illite,montmorillonite,kaolinite,limonite,and schreyerite.Through the penetration depth analysis of sulfuric acid,the reason for the high vanadium content in the coarse leaching residue(0.205%V2O5)was found,mainly due to the poor curing effect and incomplete washing after screening.Therefore,thorough washing after sieving and further optimizing the curing process are necessary.The vanadium content of the fine leaching residue(0.078%)was low and the curing-leaching effect was good.However,the vanadium content in the thickened residue(0.296%)exceeded that in the fine leaching residue,which was attributed to the neutralization reaction in the#1 thickener.To solve this problem,the neutralization and thickening processes should be performed in separate equipment.The analysis and detection of key products is helpful for identifying problems and improving the curing-leaching circuit process.展开更多
The penetration mechanism of aluminum alloy in double-sided gas tungsten arc welding (GTAW) process was probed by means of theoretical analysis, experimentation and numerical simulation. The results show that, firstly...The penetration mechanism of aluminum alloy in double-sided gas tungsten arc welding (GTAW) process was probed by means of theoretical analysis, experimentation and numerical simulation. The results show that, firstly, the welding current goes straight through the weld zone, forms a stronger electromagnetic force field, and causes a stronger fluid flow in the weld pool. Secondly, during double-sided GTAW process, when the weld is partial penetrated, a heat-congregated zone forms between the bottoms of the two weld pools, where the temperature can increase quickly even though only a small amount of heat is input. Thirdly, the buoyancy force causes an inward flow in the bottom weld pool, which can drive the hot liquid on the surface to the bottom of the pool.展开更多
It is of great significance to develop an intelligent monitoring system for weld penetration defects such as incomplete penetration and burn-through in real-time during robotic arc welding process. In this paper, robo...It is of great significance to develop an intelligent monitoring system for weld penetration defects such as incomplete penetration and burn-through in real-time during robotic arc welding process. In this paper, robotic gas metal arc welding experiments are carried out on the mild steel test pieces with Vee-type groove. Through-the-arc sensing method is used to capture the transient values of the welding voltage and current. The raw data of the captured welding current and voltage are processed statistically, and the feature vector SIO is extracted to correlate the welding conditions to the weld penetration information. It lays foundation for intelligent monitoring of weld quality in robotic arc welding.展开更多
Penetration characteristic(size and shape of penetration craters made in high hardness ARMSTAL 30PM steel) of shaped charge jets formed after detonations of modified PG-7VM warheads was analyzed in the article. Modifi...Penetration characteristic(size and shape of penetration craters made in high hardness ARMSTAL 30PM steel) of shaped charge jets formed after detonations of modified PG-7VM warheads was analyzed in the article. Modifications consisted in removing the frontal part of the grenade(fuse, ballistic cap and conductive cone) and introducing of the liner cavity filling made of polyacetal copolymer POM-C. The filings in the form of solid cones with three different heights(33%, 66% and 100% of H-the height of original PG-7VM liner) were placed inside of the hollow cone shaped charge liner. As opposed to the vast majority of previously published works(in which warhead optimization studies were focused on increasing of the depth of penetration in rolled homogeneous armor steel) the main aim of the presented modifications was to maximize the damage ratio(diameters of craters, inlet and outlet holes) of target perforated by shaped charge jet at the cost of the loss of part of the jet penetration capability. According to the best knowledge of the authors such approach to the use of the old PG-7VM warheads has not been analyzed so far. Taking into consideration high stock levels of PG-7VM warheads, and the fact that they are continuously being replaced by more efficient and more sophisticated high-explosive anti-tank warheads, it seems reasonable to look for alternate applications of the warheads withdrawn from the service. Thanks to the introduction of proposed modifications the warheads could be used by special forces or other assault units as directional mines or statically detonated cutting shaped charges as well as by combat engineers as universal charges used in various types of engineering or sapper works. The research included experimental penetration tests and their numerical reproduction in the LS-Dyna software with the simulation methodology defined and validated in previous works of the authors.Small differences(average error = 10-20%) were identified between the experimental and numerical results(dimensions of craters made in steel targets were compared) what confirmed the reliability of the modelling methodology and enabled its use for further optimization of the shapes of fillings. Within the analyzed variants of warheads modifications maximum diameters of penetration craters were obtained for the filling of the height of h = 2/3H. The diameters of holes in individual steel plates were increased by 164%, 70%, 65%(for the first, second and third plate, respectively) in relation to the variant without filling. The results of the study indicated that with the use of different materials of fillings and their various heights it is possible to control the shape of penetration craters pierced in the steel targets.展开更多
Establishment of vaginal immune defenses at the mucosal interface layer through gene vaccines promise to prevent infectious diseases among females.Mucosal barriers composed of a flowing mucus hydrogel and tightly conj...Establishment of vaginal immune defenses at the mucosal interface layer through gene vaccines promise to prevent infectious diseases among females.Mucosal barriers composed of a flowing mucus hydrogel and tightly conjugated epithelial cells(ECs),which represent the main technical difficulties for vaccine development,reside in the harsh,acidic human vaginal environment.Different from frequently employed viral vectors,two types of nonviral nanocarriers were designed to concurrently overcome the barriers and induce immune responses.Differing design concepts include the charge-reversal property(DRLS)to mimic a virus that uses any cells as factories,as well as the addition of a hyaluronic acid coating(HA/RLS)to directly target dendritic cells(DCs).With a suitable size and electrostatic neutrality,these two nanoparticles penetrate a mucus hydrogel with similar diffusivity.The DRLS system expressed a higher level of the carried human papillomavirus type 16 L1 gene compared to HA/RLS in vivo.Therefore it induced more robust mucosal,cellular,and humoral immune responses.Moreover,the DLRS applied to intravaginal immunization induced high IgA levels compared with intramuscularly injected DNA(naked),indicating timely protection against pathogens at the mucus layer.These findings also offer important approaches for the design and fabrication of nonviral gene vaccines in other mucosal systems.展开更多
基金supported by the National Natural Science Foundation of China(Grant Nos.42325406 and 42304187)the China Postdoctoral Science Foundation(Grant No.2023M733476)+3 种基金the CAS Project for Young Scientists in Basic Research(Grant No.YSBR082)the National Key R&D Program of China(Grant No.2022YFF0503203)the Key Research Program of the Institute of Geology and GeophysicsChinese Academy of Sciences(Grant Nos.IGGCAS-202101 and IGGCAS-202401).
文摘The Yutu-2 rover onboard the Chang’E-4 mission performed the first lunar penetrating radar detection on the farside of the Moon.The high-frequency channel presented us with many unprecedented details of the subsurface structures within a depth of approximately 50 m.However,it was still difficult to identify finer layers from the cluttered reflections and scattering waves.We applied deconvolution to improve the vertical resolution of the radar profile by extending the limited bandwidth associated with the emissive radar pulse.To overcome the challenges arising from the mixed-phase wavelets and the problematic amplification of noise,we performed predictive deconvolution to remove the minimum-phase components from the Chang’E-4 dataset,followed by a comprehensive phase rotation to rectify phase anomalies in the radar image.Subsequently,we implemented irreversible migration filtering to mitigate the noise and diminutive clutter echoes amplified by deconvolution.The processed data showed evident enhancement of the vertical resolution with a widened bandwidth in the frequency domain and better signal clarity in the time domain,providing us with more undisputed details of subsurface structures near the Chang’E-4 landing site.
基金Supported by the National Natural Science Foundation of China
文摘To improve our understanding of the formation and evolution of the Moon, one of the payloads onboard the Chang＇e-3 （CE-3） rover is Lunar Penetrating Radar （LPR）. This investigation is the first attempt to explore the lunar subsurface structure by using ground penetrating radar with high resolution. We have probed the subsur- face to a depth of several hundred meters using LPR. In-orbit testing, data processing and the preliminary results are presented. These observations have revealed the con- figuration of regolith where the thickness of regolith varies from about 4 m to 6 m. In addition, one layer of lunar rock, which is about 330 m deep and might have been accumulated during the depositional hiatus of mare basalts, was detected.
文摘This paper presented an investigation of particle collision and penetration using the discrete element method to understand the motion of particles and improve theoretical treatment in the sieving process. The process progressively was divided into looseness, stratification, collision, and penetration. Particle penetration has a direct effect on the screening performance. The penetration probability was defined, and the mathematical relationships between particle penetration and vibration parameters were established using the least squares method. To obtain the ideal penetration probability for materials the amplitude and frequency should preferably be near 3.0 mm and 25 Hz, respectively. The vibration direction angle has only a slight effect on penetration. The stage of the screening process from 0.1 to 0.7 s is the primary region for collision and penetration. This paper focused on the sieving process to more fully understand how particle collision and penetration influence the screening efficiency.
文摘To resolve the data combination of Phased-array Ground Penetrating Radar (PAGPR), we first build a model of PAGPR and a layered model, and then a new data combination algorithm is presented based on it. This method calculates time delay of multi-receivers, basing on the signal of the nearest receiver, then shifts other signals and adds them up, and gets one signal at last. It has been proved that this method can restrain noise, multiple waves, clutter waves and improve the precision of time location. In the end, an example is given to prove the method's efficiency.
基金supported by the National Key Research and Development Program of China(No.2020YFC1909704)the National Natural Science Foundation of China(Nos.51904222 and 52074068)+1 种基金the Shaanxi Innovation Capacity Support Plan(2020KJXX-053)the Shaanxi Natural Science Basic Research Program(No.2019JQ-468).
文摘The purpose of this study is to apply process mineralogy as a practical tool to further understand and analyze the reasons for low leaching rates in the curing-leaching process of vanadium-bearing stone coal and to find a solution or improvement to optimize the leaching index.Using vanadium-bearing stone coal with the V2O5 mass fraction of 0.88%as the research object,the effects of particle size,mineral composition,and sulfuric acid curing on the feed,intermediate,and final products of curing-leaching were analyzed.The main vanadium-bearing minerals in the feed samples included sericite/illite,montmorillonite,kaolinite,limonite,and schreyerite.Through the penetration depth analysis of sulfuric acid,the reason for the high vanadium content in the coarse leaching residue(0.205%V2O5)was found,mainly due to the poor curing effect and incomplete washing after screening.Therefore,thorough washing after sieving and further optimizing the curing process are necessary.The vanadium content of the fine leaching residue(0.078%)was low and the curing-leaching effect was good.However,the vanadium content in the thickened residue(0.296%)exceeded that in the fine leaching residue,which was attributed to the neutralization reaction in the#1 thickener.To solve this problem,the neutralization and thickening processes should be performed in separate equipment.The analysis and detection of key products is helpful for identifying problems and improving the curing-leaching circuit process.
文摘The penetration mechanism of aluminum alloy in double-sided gas tungsten arc welding (GTAW) process was probed by means of theoretical analysis, experimentation and numerical simulation. The results show that, firstly, the welding current goes straight through the weld zone, forms a stronger electromagnetic force field, and causes a stronger fluid flow in the weld pool. Secondly, during double-sided GTAW process, when the weld is partial penetrated, a heat-congregated zone forms between the bottoms of the two weld pools, where the temperature can increase quickly even though only a small amount of heat is input. Thirdly, the buoyancy force causes an inward flow in the bottom weld pool, which can drive the hot liquid on the surface to the bottom of the pool.
文摘It is of great significance to develop an intelligent monitoring system for weld penetration defects such as incomplete penetration and burn-through in real-time during robotic arc welding process. In this paper, robotic gas metal arc welding experiments are carried out on the mild steel test pieces with Vee-type groove. Through-the-arc sensing method is used to capture the transient values of the welding voltage and current. The raw data of the captured welding current and voltage are processed statistically, and the feature vector SIO is extracted to correlate the welding conditions to the weld penetration information. It lays foundation for intelligent monitoring of weld quality in robotic arc welding.
文摘Penetration characteristic(size and shape of penetration craters made in high hardness ARMSTAL 30PM steel) of shaped charge jets formed after detonations of modified PG-7VM warheads was analyzed in the article. Modifications consisted in removing the frontal part of the grenade(fuse, ballistic cap and conductive cone) and introducing of the liner cavity filling made of polyacetal copolymer POM-C. The filings in the form of solid cones with three different heights(33%, 66% and 100% of H-the height of original PG-7VM liner) were placed inside of the hollow cone shaped charge liner. As opposed to the vast majority of previously published works(in which warhead optimization studies were focused on increasing of the depth of penetration in rolled homogeneous armor steel) the main aim of the presented modifications was to maximize the damage ratio(diameters of craters, inlet and outlet holes) of target perforated by shaped charge jet at the cost of the loss of part of the jet penetration capability. According to the best knowledge of the authors such approach to the use of the old PG-7VM warheads has not been analyzed so far. Taking into consideration high stock levels of PG-7VM warheads, and the fact that they are continuously being replaced by more efficient and more sophisticated high-explosive anti-tank warheads, it seems reasonable to look for alternate applications of the warheads withdrawn from the service. Thanks to the introduction of proposed modifications the warheads could be used by special forces or other assault units as directional mines or statically detonated cutting shaped charges as well as by combat engineers as universal charges used in various types of engineering or sapper works. The research included experimental penetration tests and their numerical reproduction in the LS-Dyna software with the simulation methodology defined and validated in previous works of the authors.Small differences(average error = 10-20%) were identified between the experimental and numerical results(dimensions of craters made in steel targets were compared) what confirmed the reliability of the modelling methodology and enabled its use for further optimization of the shapes of fillings. Within the analyzed variants of warheads modifications maximum diameters of penetration craters were obtained for the filling of the height of h = 2/3H. The diameters of holes in individual steel plates were increased by 164%, 70%, 65%(for the first, second and third plate, respectively) in relation to the variant without filling. The results of the study indicated that with the use of different materials of fillings and their various heights it is possible to control the shape of penetration craters pierced in the steel targets.
基金financially supported by National Natural Science Foundation of China (NSFC,Nos.81873921 and 51903174)Sino-German Cooperation Group Project (GZ1512)+2 种基金Chengdu Science and Technology Program (2020-GH02-00007-HZ,China)Sichuan University Postdoctoral Interdisciplinary Innovation Startup Foundationthe Fundamental Research Funds for Central Universities (2021SCU12070,China)
文摘Establishment of vaginal immune defenses at the mucosal interface layer through gene vaccines promise to prevent infectious diseases among females.Mucosal barriers composed of a flowing mucus hydrogel and tightly conjugated epithelial cells(ECs),which represent the main technical difficulties for vaccine development,reside in the harsh,acidic human vaginal environment.Different from frequently employed viral vectors,two types of nonviral nanocarriers were designed to concurrently overcome the barriers and induce immune responses.Differing design concepts include the charge-reversal property(DRLS)to mimic a virus that uses any cells as factories,as well as the addition of a hyaluronic acid coating(HA/RLS)to directly target dendritic cells(DCs).With a suitable size and electrostatic neutrality,these two nanoparticles penetrate a mucus hydrogel with similar diffusivity.The DRLS system expressed a higher level of the carried human papillomavirus type 16 L1 gene compared to HA/RLS in vivo.Therefore it induced more robust mucosal,cellular,and humoral immune responses.Moreover,the DLRS applied to intravaginal immunization induced high IgA levels compared with intramuscularly injected DNA(naked),indicating timely protection against pathogens at the mucus layer.These findings also offer important approaches for the design and fabrication of nonviral gene vaccines in other mucosal systems.
