The double blade pump is widely used in sewage treatment industry,however,the research on the internal flow characteristics of the double blade pump with particle image velocimetry（PIV） technology is very little at ...The double blade pump is widely used in sewage treatment industry,however,the research on the internal flow characteristics of the double blade pump with particle image velocimetry（PIV） technology is very little at present.To reveal inner flow characteristics in double blade pump impeller under off-design and design conditions,inner flows in a double blade pump impeller,whose specific speed is 111,are measured under the five off-design conditions and design condition by using 3D PIV test technology.In order to ensure the accuracy of the 3D PIV test,the external trigger synchronization system which makes use of fiber optic and equivalent calibration method are applied.The 3D PIV relative velocity synthesis procedure is compiled by using Visual C＋＋ 2005.Then absolute velocity distribution and relative velocity distribution in the double blade pump impeller are obtained.Test results show that vortex exists in each condition,but the location,size and velocity of vortex core are different.Average absolute velocity value of impeller outlet increases at first,then decreases,and then increases again with increase of flow rate.Again average relative velocity values under 0.4,0.8,and 1.2 design condition are higher than that under 1.0 design condition,while under 0.6 and 1.4 design condition it is lower.Under low flow rate conditions,radial vectors of absolute velocities at impeller outlet and blade inlet near the pump shaft decrease with increase of flow rate,while that of relative velocities at the suction side near the pump shaft decreases.Radial vectors of absolute velocities and relative velocities change slightly under the two large flow rate conditions.The research results can be applied to instruct the hydraulic optimization design of double blade pumps.展开更多
A non-overload centrifugal pump has been invented to solve the long-existingoverload problem of low specific speed centrifugal pumps when operating at greater flow andlower head than normal. The performance characteri...A non-overload centrifugal pump has been invented to solve the long-existingoverload problem of low specific speed centrifugal pumps when operating at greater flow andlower head than normal. The performance characteristics of non-overload centrifugal pumpsand the ordinary ones are introduced, and the test results are given here. By I. Khalil's numencalmethod, in hub-shroud plane using potential flow calculation to determine flow surface positionand in blade-blade plane using revised k turbulence model, the inner flow of non-overloadcentnfugal pumps and the ordinary ones are respectively calculated. The numerical simulationshows that the inner flow situates are completely different under the two cases. And there existsremarkable inner flow characteristics of non-overload centrifugal impellers but with neither flowseparation nor apparent wake flow, therefore, the lower efficiency attributes to the larger hydrau-lic friction loss due to larger blade wrapping angle.展开更多
利用Solid Works建立并简化切段式甘蔗收割机采用的轴流风机排杂装置的三维模型后,通过Solid Works Flow Simulation软件模拟分析轴流风机排杂装置的内部流场情况。根据实际情况设置仿真边界条件,模拟在不同叶轮转速、轮毂垂入导风罩深...利用Solid Works建立并简化切段式甘蔗收割机采用的轴流风机排杂装置的三维模型后,通过Solid Works Flow Simulation软件模拟分析轴流风机排杂装置的内部流场情况。根据实际情况设置仿真边界条件,模拟在不同叶轮转速、轮毂垂入导风罩深度等参数影响下排杂装置的出风口速度场和压力场分布,并比较模拟数据和试验测试结果,为切段式甘蔗收割机的轴流风机排杂装置的设计和优化提供参考。展开更多
Spray nozzle is a key component in equipment for plant protection and water-saving irrigation. The fan nozzle is a kind of spray nozzle, which is widely used in agriculture and forestry for irrigation and control of d...Spray nozzle is a key component in equipment for plant protection and water-saving irrigation. The fan nozzle is a kind of spray nozzle, which is widely used in agriculture and forestry for irrigation and control of diseases, insects, and weeds. In consideration of the increasing velocity of the flow field, when the hydraulic pressure remains unchanged and the flow path becomes narrow, and because the increase of the velocity of spray drops can increase the penetrability of spray drops into the plant canopy, a kind of new fan nozzle with multi entries and simple inner structure was designed and the influences of its structure parameters on the inner flow field were analyzed using FLUENT software. The experimental results showed that the influence of the throat length on the inner flow field of the nozzle was insignificant, while the orifice grooving degree had a significant effect on inner flow field of the nozzle. The larger the grooving degree was, the smaller the pressure and velocity of internal flow field of the nozzle. The nozzle throat length had little influence on the velocity change of internal flow field. Positive correlation was shown between throat length and flow field velocity.展开更多
基金supported by National Outstanding Young Scientists Founds of China (Grant No. 50825902)National Key Technology R&D Program of China (Grant No. 2008BAF34B15)+2 种基金National Natural Science Foundation of China (Grant No. 51079062)Jiangsu Provincial 333 High-level Personal Training Project of ChinaJiangsu Provincial Six Talent Peak of China
文摘The double blade pump is widely used in sewage treatment industry,however,the research on the internal flow characteristics of the double blade pump with particle image velocimetry（PIV） technology is very little at present.To reveal inner flow characteristics in double blade pump impeller under off-design and design conditions,inner flows in a double blade pump impeller,whose specific speed is 111,are measured under the five off-design conditions and design condition by using 3D PIV test technology.In order to ensure the accuracy of the 3D PIV test,the external trigger synchronization system which makes use of fiber optic and equivalent calibration method are applied.The 3D PIV relative velocity synthesis procedure is compiled by using Visual C＋＋ 2005.Then absolute velocity distribution and relative velocity distribution in the double blade pump impeller are obtained.Test results show that vortex exists in each condition,but the location,size and velocity of vortex core are different.Average absolute velocity value of impeller outlet increases at first,then decreases,and then increases again with increase of flow rate.Again average relative velocity values under 0.4,0.8,and 1.2 design condition are higher than that under 1.0 design condition,while under 0.6 and 1.4 design condition it is lower.Under low flow rate conditions,radial vectors of absolute velocities at impeller outlet and blade inlet near the pump shaft decrease with increase of flow rate,while that of relative velocities at the suction side near the pump shaft decreases.Radial vectors of absolute velocities and relative velocities change slightly under the two large flow rate conditions.The research results can be applied to instruct the hydraulic optimization design of double blade pumps.
文摘A non-overload centrifugal pump has been invented to solve the long-existingoverload problem of low specific speed centrifugal pumps when operating at greater flow andlower head than normal. The performance characteristics of non-overload centrifugal pumpsand the ordinary ones are introduced, and the test results are given here. By I. Khalil's numencalmethod, in hub-shroud plane using potential flow calculation to determine flow surface positionand in blade-blade plane using revised k turbulence model, the inner flow of non-overloadcentnfugal pumps and the ordinary ones are respectively calculated. The numerical simulationshows that the inner flow situates are completely different under the two cases. And there existsremarkable inner flow characteristics of non-overload centrifugal impellers but with neither flowseparation nor apparent wake flow, therefore, the lower efficiency attributes to the larger hydrau-lic friction loss due to larger blade wrapping angle.
文摘利用Solid Works建立并简化切段式甘蔗收割机采用的轴流风机排杂装置的三维模型后,通过Solid Works Flow Simulation软件模拟分析轴流风机排杂装置的内部流场情况。根据实际情况设置仿真边界条件,模拟在不同叶轮转速、轮毂垂入导风罩深度等参数影响下排杂装置的出风口速度场和压力场分布,并比较模拟数据和试验测试结果,为切段式甘蔗收割机的轴流风机排杂装置的设计和优化提供参考。
文摘Spray nozzle is a key component in equipment for plant protection and water-saving irrigation. The fan nozzle is a kind of spray nozzle, which is widely used in agriculture and forestry for irrigation and control of diseases, insects, and weeds. In consideration of the increasing velocity of the flow field, when the hydraulic pressure remains unchanged and the flow path becomes narrow, and because the increase of the velocity of spray drops can increase the penetrability of spray drops into the plant canopy, a kind of new fan nozzle with multi entries and simple inner structure was designed and the influences of its structure parameters on the inner flow field were analyzed using FLUENT software. The experimental results showed that the influence of the throat length on the inner flow field of the nozzle was insignificant, while the orifice grooving degree had a significant effect on inner flow field of the nozzle. The larger the grooving degree was, the smaller the pressure and velocity of internal flow field of the nozzle. The nozzle throat length had little influence on the velocity change of internal flow field. Positive correlation was shown between throat length and flow field velocity.
