The Qinghai-Tibet Plateau is now experiencing ecological degradation risks as a result of climate change and human activities.The alpine grassland ecology in permafrost zones is fragile and susceptible to deterioratio...The Qinghai-Tibet Plateau is now experiencing ecological degradation risks as a result of climate change and human activities.The alpine grassland ecology in permafrost zones is fragile and susceptible to deterioration due to its high altitude,low temperature,and limited oxygen,which complicates the repair of damaged land.Biological soil crusts(BSCs)are crucial for land restoration in plateau regions because they can thrive in harsh conditions and have environmentally beneficial traits.Inoculated biological soil crust(IBSC)has shown success in low-altitude desert regions,but may not be easily duplicated to the plateau environment.Therefore,it is essential to do a comprehensive and multifaceted analysis of the basic theoretical comprehension and practical application of BSCs on the Tibetan Plateau.This review article aims to provide a brief summary of the ecological significance and the mechanisms related to the creation,growth,and progression of BSCs.It discusses the techniques used for cultivating BSCs in laboratories and using them in the field,focusing on the Qinghai-Tibet Plateau circumstance.We thoroughly discussed the potential and the required paths for further studies.This study may be used as a basis for selecting suitable microbial strains and accompanying supplemental actions for implementing IBSCs in the Qinghai-Tibet Plateau.展开更多
Ralstonia solanacearum causes a lethal bacterial wilt disease in many crops,leading to huge losses in crop production every year.Understanding of plant-R.solanacearum interactions will aid to develop efficient strateg...Ralstonia solanacearum causes a lethal bacterial wilt disease in many crops,leading to huge losses in crop production every year.Understanding of plant-R.solanacearum interactions will aid to develop efficient strategies to control the disease.As a soilborne pathogen,R.solanacearum naturally infects plants via roots.A huge limitation in studying plant-R.solanacearum interactions is the large variation of R.solanacearum infection assay due to the variable soil conditions and uneven inoculum exposure.Here,we developed a robust and reliable Petri-dish inoculation method which allows consistent and stable infection in young plant seedlings.This method is easy to use,takes about only 10 days from seed germination to the completion of inoculation assay,and requires less inoculum of bacteria as well as growth chamber space.We proved the efficacy of the seedling Petri-dish inoculation method by analyzing plant defense primed by molecular patterns,resistance of defense-related plant mutants,and virulence of R.solanacearum mutants.Furthermore,we demonstrated that the seedling Petri-dish inoculation method can be applied to other host plants such as tobacco and has great potential for high-throughput screening of resistant plant germplasms to bacterial wilt in the future.展开更多
In this study,we proposed a reliable and sustainable technique for the clean utilization of shrimp wastes,which can yield a solid inoculant of Bacillus subtilis OKF04 containing micronutrients at low cost without the ...In this study,we proposed a reliable and sustainable technique for the clean utilization of shrimp wastes,which can yield a solid inoculant of Bacillus subtilis OKF04 containing micronutrients at low cost without the risk of contamination.Study of the culture conditions revealed that the head of shrimp Litopenaus vannamei and the wheat bran acted as suitable substrates for the growth of B.subtilis OKF04.With 60%initial moisture content,30℃culture temperature,and 5%inoculation amount,followed by 48 hours of fermentation and 0.5%soluble starch added during the drying process(50℃for 6h),a solid B.subtilis OKF04 inoculant with a spore amount of 2.4×10^(10)CFU g^(-1)and a high amino acid content was obtained.The solid B.subtilis OKF04 inoculant was applied to cultivate pakchoi under pot experiment.As the result,of adding to,the size of stems and leaves,nutritional composition,and physiological activity of pakchoi were significantly(P<0.05)enhanced by solid B.subtilis OKF04 inoculant.B.subtilis OKF04 also significantly(P<0.05)increased the soil’s nutrient content and improved its microbial composition.Furthermore,pakchoi cultivated with a low dose of solid B.subtilis OKF04 inoculant(0.05 g kg^(-1)soil)resulted in the best results.This study provides a new method for the preparation of microbial inoculants with solid waste shrimp heads.展开更多
Bauhinia faberi via.Microphylla(BFM)is an important tree species for vegetation restoration in the dry valley of southwestern China.However,there were few studies on the application of arbuscular mycorrhizal fungi(AMF...Bauhinia faberi via.Microphylla(BFM)is an important tree species for vegetation restoration in the dry valley of southwestern China.However,there were few studies on the application of arbuscular mycorrhizal fungi(AMF)in improving the drought adaptation of BFM.In order to investigate the response of BFM to water stress(WS),we tested four inoculation treatments((no AMF,Control),Glomus mosseae(GM),Glomus intraradices(GI),Glomus mosseae+Glomus intraradices(GMI))in pots,experimented under three field water holding capacity(WHC)of 70%,50%and 30%.The changes of seedling survival rate(SR),AMF relative root length colonization rate(Col),growth,photosynthetic parameters,water status and leaf nutrients were examined.The results showed that under 30%WHC drought conditions,SR with dual inoculation of AMF was not higher than with single inoculation of GM,suggesting that increasing the diversity of AMF did not definitely improve plant SR,and that the species of inoculated AMF might have an important impact on SR.The sensitivity of dual inoculated Col to water stress was lower than that of single inoculation,which was more favorable for dual inoculated BFM seedlings adapting to drought environment.The overall drought resistance ability(D)also showed that dual inoculation of AMF improved plant drought adaptation compared with single inoculation,which was related to the higher Col of dual inoculated AMF.This study is of practical importance to promote vegetation restoration in arid areas in a cost-effective and environmentally friendly manner.展开更多
[Objectives]This study was conducted to establish simple, efficient, stable, standardized and practical identification methods for sugarcane resistance to white leaf disease(SCWL), and promote the breeding for sugarca...[Objectives]This study was conducted to establish simple, efficient, stable, standardized and practical identification methods for sugarcane resistance to white leaf disease(SCWL), and promote the breeding for sugarcane resistance to SCWL. [Methods]The identification technology of sugarcane resistance to SCWL was systematically studied and explored from the aspects of sugarcane material treatment and planting, inoculation liquid preparation, inoculation method, disease investigation, grading standard formulation, etc., and two sets of simple, efficient, stable, standardized and practical accurate identification methods for sugarcane resistance to SCWL were created for the first time, namely, the seed cane coating inoculation method and the stem-cutting inoculation method at the growth stage. The seed cane coating inoculation method includes the steps of directly screening SCWL phytoplasma, extracting juice from cane and adding 10 times of sterile water to prepare an inoculation liquid, spraying seed cane on plastic film to keep moisture, planting the inoculated materials in barrels in an insect-proof greenhouse for cultivation, investigating the incidence rate 30 d after inoculation, and evaluating the disease resistance according to the 1-5 level standard. The method of stem-cutting inoculation includes the steps of directly screening sugarcane stems carrying SCWL phytoplasma and adding 10 times of sterile water to prepare an inoculation liquid, cultivating the identification materials in an insect-proof greenhouse, dropping 100 μl of the inoculation liquid into each root incision with a pipette gun at the age of 6 months, investigating the incidence rate 20 d after planting, and evaluating the disease resistance according to the 1-5 level standard. [Results] The two methods are similar to the natural transmission method. After inoculation, SCML occurred significantly, with high sensitivity and good reproducibility. The results of resistance identification were consistent with those of natural disease in the field. Through the two inoculation methods and field natural disease investigation, the resistance of 10 main cultivars to SCML was identified, which was true and reliable. [Conclusions] This study can provide standard varieties for identification of SCML resistance in the future.展开更多
BACKGROUND Forehead osteoma is a commonly encountered benign facial bone tumor.Endoscopic excision of benign forehead masses is widely performed.Here,we report a rare case of recurrent forehead osteoma that disseminat...BACKGROUND Forehead osteoma is a commonly encountered benign facial bone tumor.Endoscopic excision of benign forehead masses is widely performed.Here,we report a rare case of recurrent forehead osteoma that disseminated after a previous osteoma excision.CASE SUMMARY A 54-year-old female patient had previously undergone endoscopic removal of a single forehead osteoma at 30 years of age.However,she had a recurrent osteoma around the same site and underwent another endoscopic resection at 40 years of age.During her first visit to our outpatient clinic,she presented with a cobblestone-like irregular surface on the forehead and a 3D facial bone computed tomography scan revealed a widely ragged surface of the inoculated osteoma on the outer table of the frontal bone.Under general anesthesia,we performed a radical complete excision of the disseminated osteoma through a bicoronal incision using an osteotome,chisel,mallet,and rasping.We hypothesized that the recurrence may have been caused by the inoculation of residual osteoma remnants from the previous procedure.Craniofacial surgeons should be cautious when removing osteoma particles,particularly when using an endoscopic approach.CONCLUSION To prevent recurrence,it is essential to conduct additional meticulous burring and a thorough inspection of the surface after copious irrigation.展开更多
The reproductive methods of ornamental arrowroot(Maranta arundinacea)mainly include plant division,cutting propagation,truncation and sprout promotion propagation,and tissue culture.Large-scale seedling production mai...The reproductive methods of ornamental arrowroot(Maranta arundinacea)mainly include plant division,cutting propagation,truncation and sprout promotion propagation,and tissue culture.Large-scale seedling production mainly relies on tissue culture.In the process of tissue culture,the culture conditions can be artificially controlled,and the plant materials used for tissue culture grow completely in artificially-provided culture media and microclimate environment,free from the adverse effects of catastrophic climate,seasonal and diurnal changes.Because the conditions are relatively uniform,tissue culture is very beneficial for plant growth and more convenient for stable long-term cultivation and production.In the process of tissue culture,the inoculation process is more important.How can we achieve standardized operation and reduce pollution during the inoculation process is worth exploring.展开更多
Cercospora leaf spot is fast turning into a critically important disease in Zimbabwe.The disease is caused by Cercospora coffeicola which significantly reduces productivity and quality of coffee.Disturbingly,optimum s...Cercospora leaf spot is fast turning into a critically important disease in Zimbabwe.The disease is caused by Cercospora coffeicola which significantly reduces productivity and quality of coffee.Disturbingly,optimum sporulation of Cercospora coffeicola in culture remains a limiting factor for microbial analysis and quantitative studies of Cercospora leaf spot.Faced with this challenge,an in-vitro study was conducted at Coffee Research Institute,Manicaland,Zimbabwe to examine growth of Cercospora coffeicola in different nutrient media and to determine the best media for Cercospora coffeicola analysis.Six nutrient media were assessed(corn meal agar,oat meal agar,Czapek Dox agar,malt extract agar,yeast extract agar and potato dextrose agar)for the growth of Cercospora coffeicola.The laboratory-based experiment was duplicated,laid out in a Completely Randomized Design,replicated three times and based on Cercospora coffeicola nutrient inoculation.Data were collected on radial growth,colour and texture of mycelium at 3 and 6 days after inoculation.There were significant differences(p<0.05)in the growth of Cercospora coffeicola in media after 3 and 6 days.Malt extract agar had the greatest radial growth(34 mm and 32 mm)of Cercospora coffeicola for trials 1 and 2 respectively,whilst the least growth was in the oat meal agar(14.2 mm and 15.7 mm)for trials 1 and 2 respectively.There were variations in colour and texture of mycelium with malt extract agar,potato dextrose agar and oat meal agar associated with darker colours and rough texture while smooth white mycelia were found in corn meal agar.After considering all nutrient media,malt extract agar was found to be the best media for the growth of Cercospora coffeicola in-vitro.On the basis of our findings,the authors recommend the use of malt extract agar as the primary media for identification and characterisation of Cercospora coffeicola.展开更多
Mathematical model is formulated for description of thermophysical processes at laser welding of metal plates for the case when modifying nanoparticles of refractory compounds (nanopowder inoculators – NPI) are intro...Mathematical model is formulated for description of thermophysical processes at laser welding of metal plates for the case when modifying nanoparticles of refractory compounds (nanopowder inoculators – NPI) are introduced into the weld pool. Specially prepared nanoparticles of refractory compounds serve here as crystallization centers, i.e. in fact they are exogenous inoculants on which surface clusters are grouped. This can be used to control the melt crystallization process and formation of its structure, and, therefore, properties of the weld seam. As an example, calculation results of the butt welding of aluminum alloy and steel plates are presented. The results of calculation and experimental data comparison are shown.展开更多
Fungi are often used to induce agarwood inAquilariatrees. This study was conducted to evaluate the effect of several fungi on agarwood formation over time in youngAquilaria malaccensis (Lam.) trees. Typical changes ...Fungi are often used to induce agarwood inAquilariatrees. This study was conducted to evaluate the effect of several fungi on agarwood formation over time in youngAquilaria malaccensis (Lam.) trees. Typical changes in the length and light intensity of the resulting discoloration were observed after three and six month periods following inoculation. Wood samples were observed microscopically and classified into several light intensity groups. The discoloration length was meas-ured longitudinally. The duration after inoculation affected the mean of discoloration length: the 6-month old sample (1.70 cm) had a wider discoloration zone when compared to the 3-month old sample (1.17 cm). When measuring the discoloration intensity, a positive relationship with time was perceived. Digital images, captured using a camera-equipped microscope, revealed that wood samples collected after six months appeared to be 1.8-times darker than after three months. We concluded that time, not the species of any of the tested fungi, had significant effect on discoloration length and intensity. Gas chromatography/mass spec-trometry (GCMS) analysis of the 6-month old sample yielded some important agarwood compounds such as benzylacetone, anisylacetone, guaiene and palustrol. This demonstrates that the tested fungi have the ability to induce agarwood formation in nurseryA. malaccensis trees.展开更多
The effect of inoculation with arbuscular mycorrhizal(AM) fungi( Acaulospora lavis ) on the degradation of di(2 ethylhexyl) phthalate(DEHP) in soil was studies. Cowpea plants (Pigna sinensis) were used as host p...The effect of inoculation with arbuscular mycorrhizal(AM) fungi( Acaulospora lavis ) on the degradation of di(2 ethylhexyl) phthalate(DEHP) in soil was studies. Cowpea plants (Pigna sinensis) were used as host plants and grown in a specially designed rhizobox. The experimental results indicated that, both in sterile and non sterile soil, mycorrhizal colonization rates were much higher in the mycorrhizal plants than in the non mycorrhizal plants. Addition of 4 mg/kg DEHP slightly affected mycorrhizal colonization, but the addition of 100 mg/kg DEHP significantly decreased mycorrhizal colonization. DEHP degradation in the mycorrhizosphere(Ms) and hyphosphere(Hs), especially in the Hs, increased after inoculation with Acaulospora lavis . It is concluded that mycorrhizal hyphae play an important role in the plant uptake, degradation and translocation of DEHP. The mechanism might be attributed to increased numbers of bacteria and actinomycetes and activity of dehydrogenase, urease and acid phosphatase in the Ms and Hs by mycorrhizal fungi.展开更多
Background:Bacillus amyloliquefaciens(BA)and Bacillus subtilis(BS)are usually used as feed supplements directly or bacterial inoculants in biological feeds for animals.However,few research have reported the effects of...Background:Bacillus amyloliquefaciens(BA)and Bacillus subtilis(BS)are usually used as feed supplements directly or bacterial inoculants in biological feeds for animals.However,few research have reported the effects of BA and BS on fermentation characteristics and bacterial community successions of whole-plant corn silage during ensiling.If the BA and BS inoculants have positive effects on silages,then they could not only improve fermentation characteristics,but also deliver BA or BS viable cells to ruminants,which would play its probiotic effect.Therefore,the objectives of this study were to investigate the effects of BA and BS on the fermentation,chemical characteristics,bacterial community and their metabolic pathway of whole-plant corn silage.Results:Freshly chopped whole-plant corn was inoculated without or with BA and BS,respectively,and ensiled for1,3,7,14 and 60 d.Results showed that BA and BS inoculations increased lactic acid concentrations of whole-plant corn silages compared with control,and BA inoculation decreased acetic acid concentrations,whereas BS inoculation decreased fiber contents and increased crude protein(CP)content.Higher water-soluble carbohydrate contents and lower starch contents were observed in BA-and BS-inoculated silages compared with that in control.The decreased CP content and increased non-protein nitrogen content were observed in BA-inoculated silage,which was consistent with the higher amino acid metabolism abundances observed in BA-inoculated silage.In addition,it was noteworthy that BA and BS inoculations increased the metabolism of cofactors and vitamins,and decreased the relative abundances of drug resistance:antimicrobial pathways.We also found that the bacterial metabolism pathways were clearly separated into three clusters based on the ensiling times of whole-plant corn silage in the present study.There were no significant differences in bacterial community compositions among the three groups during ensiling.However,BA and BS inoculations decreased the relative abundances of undesirable bacteria such as Acetobacter and Acinetobacter.Conclusion:Our findings suggested that the BS strain was more suitable as silage inoculants than the BA strain in whole-plant corn silage in this study.展开更多
As a potent nucleating substrate forα-Mg grain,MgAl_(2)O_(4) powder was used to inoculate the Mg-Al melt in this study.The effects of MgAl_(2)O_(4)amount,holding time and Al content on the grain size and grain refini...As a potent nucleating substrate forα-Mg grain,MgAl_(2)O_(4) powder was used to inoculate the Mg-Al melt in this study.The effects of MgAl_(2)O_(4)amount,holding time and Al content on the grain size and grain refining ratio of the inoculated Mg-Al alloys are systematically investigated.The results show that the minimum grain size of Mg-3Al alloy is achieved by adding 2wt.%MgAl_(2)O_(4)powder and this alloy exhibits higher grain refining ratio than Mg-5Al and Mg-8Al alloys.The crystallographic misfit calculation indicates the wellmatching and possible orientation relationships(ORs)betweenα-Mg and MgAl_(2)O_(4).Among these predicted ORs,[10–10]α−Mg//[110]MgAl2O4 in(0002)α−Mg//(1–13)MgAl2O4 possesses the smallest misfit,i.e.,2.34%(fr).Both results of the experiment and crystallographic calculation demonstrate that the grain refinement of Mg-Al alloys is attributed to the MgAl_(2)O_(4)particles acting as the heterogeneous nucleation substrates forα-Mg grains.展开更多
Objective To understand the infectious characteristics of a hamster-adapted scrapie strain 263K with five different routes of infection including intracerebral (i.e.), intraperitoneal (i.p.), intragastrical (i.g.), in...Objective To understand the infectious characteristics of a hamster-adapted scrapie strain 263K with five different routes of infection including intracerebral (i.e.), intraperitoneal (i.p.), intragastrical (i.g.), intracardiac and intramuscular (i.m.) approaches. Methods Hamsters were infected with crude- or fine-prepared brain extracts. The neuropathological changes, PrPSc deposits, and patterns of PK-resistant PrP were analyzed by HE stain, immunohistochemistry (IHC) assay and Western blot. Reactive gliosis and neuron loss were evaluated by glial fibrillary acidic protein (GFAP) and neuron specific enolase (NSE) specific IHC. Results The animals inoculated in i.m. and Lp. ways with crude PrPSc extracts showed clinical signs at the average incubation of 69.212.8 and 65.5±3.9 days. Inoculation in i.c. and intracardiac ways with fine PrPSc extracts (0.00035 g) caused similar, but relative long incubation of around 90 days. Only one out of eight hamsters challenged in i.g way with low dosage (0.01 g) became ill after a much longer incubation (185 d), while all animals (4/4) with high dosage (0.04 g) developed clinical signs 105 days postinfection. The most remarkable spongiform degeneration and PrPSc deposits were found in brain stem among the five challenge groups generally. The number of GFAP-positive astrocytes increased distinctly in brain stems in all infection groups, while the number of NSE-positive cells decreased significantly in cerebrum, except i.c. group. The patterns of PK-resistant PrP in brains were basically identical among the five infection routes. Conclusion Typical TSE could be induced in hamsters by inoculating strain 263K in the five infection ways. The incubation periods in bioassays depend on infective dosage, administrating pathway and preparation of PrPSc. The neuropathological changes and PrPSc deposits seem to be related with regions and inoculating pathways.展开更多
The paper reviews original data obtained by the present authors,revealed in recent separate publications,describing specific procedures for high quality grey irons,and reflecting the forecast needs of the worldwide ir...The paper reviews original data obtained by the present authors,revealed in recent separate publications,describing specific procedures for high quality grey irons,and reflecting the forecast needs of the worldwide iron foundry industry.High power,medium frequency coreless induction furnaces are commonly used in electric melting grey iron foundries.This has resulted in low sulphur(<0.05wt.%)and aluminium(<0.005wt.%)contents in the iron,with a potential for higher superheating(>1,500°C),contributing to unfavourable conditions for graphite nucleation.Thin wall castings are increasingly produced by these electric melt shops with a risk of greater eutectic undercooling during solidification.The paper focused on two groups of grey cast irons and their specific problems:carbides and graphite morphology control in lower carbon equivalent high strength irons(CE=3.4%-3.8%),and austenite dendrite promotion in eutectic and slightly hypereutectic irons(CE=4.1%-4.5%),in order to increase their strength characteristics.There are 3 stages and 3 steps involving graphite formation,iron chemistry and iron processing that appear to be important.The concept in the present paper sustains a threestage model for nucleating flake graphite[(Mn,X)S type nuclei].There are three important groups of elements(deoxidizer,Mn/S,and inoculant)and three technological stages in electric melting of iron(superheat,pre-conditioning of base iron,final inoculation).Attention is drawn to a control factor(%Mn)x(%S)ensuring it equals to 0.03–0.06,accompanied by 0.005wt.%–0.010wt.%Al and/or Zr content in inoculated irons.It was found that iron powder addition promotes austenite dendrite formation in eutectic and slightly eutectic,acting as reinforcement for the eutectic cells.But,there is an accompanying possible negative influence on the characteristics of the(Mn,X)S type graphite nuclei(change the morphology of nuclei from polygonal compact to irregular polygonal,and therefore promote chill tendency in treated irons).A double addition(iron powder+inoculant)appears to be an effective treatment to benefit both austenite and graphite nucleation,with positive effects on the final structure and chill tendency.展开更多
Cultivation of aerobic granules for simultaneous nitrification and denitrification in two sequencing batch airlift bioreactors was studied. Conventional activated floc and anaerobic granules served as main two inocula...Cultivation of aerobic granules for simultaneous nitrification and denitrification in two sequencing batch airlift bioreactors was studied. Conventional activated floc and anaerobic granules served as main two inoculated sludge in the systems. Morphological variations of sludge in the reactors were observed. It was found that the cultivation of aerobic granules was closely associated with the kind of inoculated sludge. Round and regular aerobic granules were prevailed in both reactors, and the physical characteristics of the aerobic granules in terms of settling ability, specific gravity, and ratio of water containing were distinct when the inoculate sludge was different. Aerobic granules formed by seeding activated floc are more excellent in simultaneous nitrification and denitrification than that by aerobic granules formed from anaerobic granules. It was concluded that inoculated sludge plays a crucial role in the cultivation of aerobic granules for simultaneous nitrification and denitrification.展开更多
To investigate the possibility of inoculating eutectic cells, a novel Al-10Si-2Fe master alloy was synthesized and tested in Sr-modifi ed A356 alloy. The new master alloy that consists of α-Al, Si and β-Al5FeSi phas...To investigate the possibility of inoculating eutectic cells, a novel Al-10Si-2Fe master alloy was synthesized and tested in Sr-modifi ed A356 alloy. The new master alloy that consists of α-Al, Si and β-Al5FeSi phases was prepared by a casting process, and the silicon phase was found to grow epitaxially from the β-Al5FeSi particles. The inoculation effi ciency of the new master alloy on Sr-modifi ed A356 alloy has been investigated by quenching experiment and thermal analysis. With the addition of the new master alloy, the area density of eutectic cells is effectively increased by 100% and the eutectic growth temperature is increased by 1.5 oC. Therefore, the new master alloy is deduced to introduce nucleating substrates for eutectic cells and to refi ne the eutectic cells in Sr-modifi ed A356 alloy. There is no poisonous interaction between the Al-10Si-2Fe master alloy and the Sr in this study. Consequently, the mechanical properties have been improved by the addition of the new master alloy.展开更多
Dissolved organic matter(DOM) of municipal solid waste(MSW) consists of minerals, water, ash and humic substances, and is known to enhance plant growth. In this study, inoculating microbes(Z J, MS) were used in ...Dissolved organic matter(DOM) of municipal solid waste(MSW) consists of minerals, water, ash and humic substances, and is known to enhance plant growth. In this study, inoculating microbes(Z J, MS) were used in municipal solid wastes composting, and composting implemented a industrialized technology. During composting, dissolved organic matter was extracted from the compost and purified. The spectral characteristics of dissolved organic matter was determined by fluorescence emission, excitation, and synchronous spectroscopy. Fluorescence emission, excitation, and synchronous spectra characterized by different relative fluorescent intensities and peaks over time. Fluorescence spectra were similar to that of fulvic acid in sewage sludge, indicating the presence of dissolved organic matter with aromatic structures and a high degree of molecular polymerization. Compared with the controls with no microbial inoculation, the microbe-inoculated treatments exhibited the increase of aromatic polycondensation, in the following order: MS + ZJ 〉 ZJ 〉 MS 〉 CK.展开更多
Gyrinops walla Gaertn. is the only species growing in Sri Lanka that belongs to the agarwood family,Thymelaeaceae. Although agarwood resin induction and extraction from Aquilaria species of the same family have been p...Gyrinops walla Gaertn. is the only species growing in Sri Lanka that belongs to the agarwood family,Thymelaeaceae. Although agarwood resin induction and extraction from Aquilaria species of the same family have been practised for many decades in Southeast Asian region,the ability of producing agarwood resins in G. walla was discovered recently. Since previous studies were on agarwood resins formed due to natural causes, the present study was conducted to identify the potential fungal species that are capable of artificially inducing agarwood resin formation in G. walla. Since this is the first ever study conducted on artificial inducement of agarwood resin formation in G.walla, Aspergillus niger and Fusarium solani were selected owing to their high abundance in the naturally formed agarwood resinous tissues collected from 25 G. walla trees.Both fungal species were separately grown in yeast extract glucose agar and used to inoculate healthy G. walla trees under aseptic conditions. Three holes were made for each tree and 2 g of fungal culture including the medium were placed in each hole. Tissue discoloration, characteristic aroma, resin content and resin constituents were checked at10 cm intervals above and below the inoculation points for a period of 1 year. Results revealed that tissue discoloration and resin content were higher in the trees inoculated with A. niger. Other than at 10 cm above and below the inoculation points, samples collected at all locations had significantly higher resin contents when inoculated with A. niger compared to F. solani. Sixteen agarwood resin constituents, which were also recorded in Aquilaria species, were identified from the discolored tissues using GC–MS analysis. Jinkohol, agarospirol and 2(2-phenyl)chromone derivatives were found in all discolored tissues collected at 10-cm intervals of the trees inoculated with both fungi. b-Seline, c-eudesmol and valerenal were found in nine of 10 sample points on the stem. c-Elemene was recorded only in one sample. The characteristic aroma during burning was stronger for dark-colored tissues than the light-colored ones. The present study confirmed the potential use of certain fungal species to induce agarwood resin in G. walla and that A. niger is more effective than F.solani.展开更多
基金funded by the National Key R&D Program of China (2022YFB4202102)the Key R&D Program of Ningxia Hui Autonomous Region (2022BEG02003)the Excellent Member of Youth Innovation Promotion Association CAS (No.Y202085)。
文摘The Qinghai-Tibet Plateau is now experiencing ecological degradation risks as a result of climate change and human activities.The alpine grassland ecology in permafrost zones is fragile and susceptible to deterioration due to its high altitude,low temperature,and limited oxygen,which complicates the repair of damaged land.Biological soil crusts(BSCs)are crucial for land restoration in plateau regions because they can thrive in harsh conditions and have environmentally beneficial traits.Inoculated biological soil crust(IBSC)has shown success in low-altitude desert regions,but may not be easily duplicated to the plateau environment.Therefore,it is essential to do a comprehensive and multifaceted analysis of the basic theoretical comprehension and practical application of BSCs on the Tibetan Plateau.This review article aims to provide a brief summary of the ecological significance and the mechanisms related to the creation,growth,and progression of BSCs.It discusses the techniques used for cultivating BSCs in laboratories and using them in the field,focusing on the Qinghai-Tibet Plateau circumstance.We thoroughly discussed the potential and the required paths for further studies.This study may be used as a basis for selecting suitable microbial strains and accompanying supplemental actions for implementing IBSCs in the Qinghai-Tibet Plateau.
基金This work was supported by the National Natural Science Foundation of China(32072399 and 32272641)the Fundamental Research Funds for the Central Universities(GK202201017 and GK202207024)the Program of Fujian Key Laboratory for Monitoring and Integrated Management of Crop Pests,China(MIMCP-202203).
文摘Ralstonia solanacearum causes a lethal bacterial wilt disease in many crops,leading to huge losses in crop production every year.Understanding of plant-R.solanacearum interactions will aid to develop efficient strategies to control the disease.As a soilborne pathogen,R.solanacearum naturally infects plants via roots.A huge limitation in studying plant-R.solanacearum interactions is the large variation of R.solanacearum infection assay due to the variable soil conditions and uneven inoculum exposure.Here,we developed a robust and reliable Petri-dish inoculation method which allows consistent and stable infection in young plant seedlings.This method is easy to use,takes about only 10 days from seed germination to the completion of inoculation assay,and requires less inoculum of bacteria as well as growth chamber space.We proved the efficacy of the seedling Petri-dish inoculation method by analyzing plant defense primed by molecular patterns,resistance of defense-related plant mutants,and virulence of R.solanacearum mutants.Furthermore,we demonstrated that the seedling Petri-dish inoculation method can be applied to other host plants such as tobacco and has great potential for high-throughput screening of resistant plant germplasms to bacterial wilt in the future.
基金the China Agriculture Research System of MOF and MARA(No.CARS-48)the Taishan Scholar Project of Shandong Province(No.tsqn201812020)。
文摘In this study,we proposed a reliable and sustainable technique for the clean utilization of shrimp wastes,which can yield a solid inoculant of Bacillus subtilis OKF04 containing micronutrients at low cost without the risk of contamination.Study of the culture conditions revealed that the head of shrimp Litopenaus vannamei and the wheat bran acted as suitable substrates for the growth of B.subtilis OKF04.With 60%initial moisture content,30℃culture temperature,and 5%inoculation amount,followed by 48 hours of fermentation and 0.5%soluble starch added during the drying process(50℃for 6h),a solid B.subtilis OKF04 inoculant with a spore amount of 2.4×10^(10)CFU g^(-1)and a high amino acid content was obtained.The solid B.subtilis OKF04 inoculant was applied to cultivate pakchoi under pot experiment.As the result,of adding to,the size of stems and leaves,nutritional composition,and physiological activity of pakchoi were significantly(P<0.05)enhanced by solid B.subtilis OKF04 inoculant.B.subtilis OKF04 also significantly(P<0.05)increased the soil’s nutrient content and improved its microbial composition.Furthermore,pakchoi cultivated with a low dose of solid B.subtilis OKF04 inoculant(0.05 g kg^(-1)soil)resulted in the best results.This study provides a new method for the preparation of microbial inoculants with solid waste shrimp heads.
基金supported by the National Key Research and Development Program of China(2017YFC0505104)"135 Project"of Institute of Mountain Hazards and Environment,Chinese Academy of Sciences,Chengdu,China(SDS–135–1707)。
文摘Bauhinia faberi via.Microphylla(BFM)is an important tree species for vegetation restoration in the dry valley of southwestern China.However,there were few studies on the application of arbuscular mycorrhizal fungi(AMF)in improving the drought adaptation of BFM.In order to investigate the response of BFM to water stress(WS),we tested four inoculation treatments((no AMF,Control),Glomus mosseae(GM),Glomus intraradices(GI),Glomus mosseae+Glomus intraradices(GMI))in pots,experimented under three field water holding capacity(WHC)of 70%,50%and 30%.The changes of seedling survival rate(SR),AMF relative root length colonization rate(Col),growth,photosynthetic parameters,water status and leaf nutrients were examined.The results showed that under 30%WHC drought conditions,SR with dual inoculation of AMF was not higher than with single inoculation of GM,suggesting that increasing the diversity of AMF did not definitely improve plant SR,and that the species of inoculated AMF might have an important impact on SR.The sensitivity of dual inoculated Col to water stress was lower than that of single inoculation,which was more favorable for dual inoculated BFM seedlings adapting to drought environment.The overall drought resistance ability(D)also showed that dual inoculation of AMF improved plant drought adaptation compared with single inoculation,which was related to the higher Col of dual inoculated AMF.This study is of practical importance to promote vegetation restoration in arid areas in a cost-effective and environmentally friendly manner.
基金Supported by National Natural Science Foundation of China (31760504)China Agriculture Research System of MOF and MARA(CARS-170303)+1 种基金Yunling Industry and Technology Leading Talent Training Program (2018LJRC56)Special Fund for the Construction of Modern Agricultural Industry Technology System in Yunnan Province。
文摘[Objectives]This study was conducted to establish simple, efficient, stable, standardized and practical identification methods for sugarcane resistance to white leaf disease(SCWL), and promote the breeding for sugarcane resistance to SCWL. [Methods]The identification technology of sugarcane resistance to SCWL was systematically studied and explored from the aspects of sugarcane material treatment and planting, inoculation liquid preparation, inoculation method, disease investigation, grading standard formulation, etc., and two sets of simple, efficient, stable, standardized and practical accurate identification methods for sugarcane resistance to SCWL were created for the first time, namely, the seed cane coating inoculation method and the stem-cutting inoculation method at the growth stage. The seed cane coating inoculation method includes the steps of directly screening SCWL phytoplasma, extracting juice from cane and adding 10 times of sterile water to prepare an inoculation liquid, spraying seed cane on plastic film to keep moisture, planting the inoculated materials in barrels in an insect-proof greenhouse for cultivation, investigating the incidence rate 30 d after inoculation, and evaluating the disease resistance according to the 1-5 level standard. The method of stem-cutting inoculation includes the steps of directly screening sugarcane stems carrying SCWL phytoplasma and adding 10 times of sterile water to prepare an inoculation liquid, cultivating the identification materials in an insect-proof greenhouse, dropping 100 μl of the inoculation liquid into each root incision with a pipette gun at the age of 6 months, investigating the incidence rate 20 d after planting, and evaluating the disease resistance according to the 1-5 level standard. [Results] The two methods are similar to the natural transmission method. After inoculation, SCML occurred significantly, with high sensitivity and good reproducibility. The results of resistance identification were consistent with those of natural disease in the field. Through the two inoculation methods and field natural disease investigation, the resistance of 10 main cultivars to SCML was identified, which was true and reliable. [Conclusions] This study can provide standard varieties for identification of SCML resistance in the future.
文摘BACKGROUND Forehead osteoma is a commonly encountered benign facial bone tumor.Endoscopic excision of benign forehead masses is widely performed.Here,we report a rare case of recurrent forehead osteoma that disseminated after a previous osteoma excision.CASE SUMMARY A 54-year-old female patient had previously undergone endoscopic removal of a single forehead osteoma at 30 years of age.However,she had a recurrent osteoma around the same site and underwent another endoscopic resection at 40 years of age.During her first visit to our outpatient clinic,she presented with a cobblestone-like irregular surface on the forehead and a 3D facial bone computed tomography scan revealed a widely ragged surface of the inoculated osteoma on the outer table of the frontal bone.Under general anesthesia,we performed a radical complete excision of the disseminated osteoma through a bicoronal incision using an osteotome,chisel,mallet,and rasping.We hypothesized that the recurrence may have been caused by the inoculation of residual osteoma remnants from the previous procedure.Craniofacial surgeons should be cautious when removing osteoma particles,particularly when using an endoscopic approach.CONCLUSION To prevent recurrence,it is essential to conduct additional meticulous burring and a thorough inspection of the surface after copious irrigation.
文摘The reproductive methods of ornamental arrowroot(Maranta arundinacea)mainly include plant division,cutting propagation,truncation and sprout promotion propagation,and tissue culture.Large-scale seedling production mainly relies on tissue culture.In the process of tissue culture,the culture conditions can be artificially controlled,and the plant materials used for tissue culture grow completely in artificially-provided culture media and microclimate environment,free from the adverse effects of catastrophic climate,seasonal and diurnal changes.Because the conditions are relatively uniform,tissue culture is very beneficial for plant growth and more convenient for stable long-term cultivation and production.In the process of tissue culture,the inoculation process is more important.How can we achieve standardized operation and reduce pollution during the inoculation process is worth exploring.
文摘Cercospora leaf spot is fast turning into a critically important disease in Zimbabwe.The disease is caused by Cercospora coffeicola which significantly reduces productivity and quality of coffee.Disturbingly,optimum sporulation of Cercospora coffeicola in culture remains a limiting factor for microbial analysis and quantitative studies of Cercospora leaf spot.Faced with this challenge,an in-vitro study was conducted at Coffee Research Institute,Manicaland,Zimbabwe to examine growth of Cercospora coffeicola in different nutrient media and to determine the best media for Cercospora coffeicola analysis.Six nutrient media were assessed(corn meal agar,oat meal agar,Czapek Dox agar,malt extract agar,yeast extract agar and potato dextrose agar)for the growth of Cercospora coffeicola.The laboratory-based experiment was duplicated,laid out in a Completely Randomized Design,replicated three times and based on Cercospora coffeicola nutrient inoculation.Data were collected on radial growth,colour and texture of mycelium at 3 and 6 days after inoculation.There were significant differences(p<0.05)in the growth of Cercospora coffeicola in media after 3 and 6 days.Malt extract agar had the greatest radial growth(34 mm and 32 mm)of Cercospora coffeicola for trials 1 and 2 respectively,whilst the least growth was in the oat meal agar(14.2 mm and 15.7 mm)for trials 1 and 2 respectively.There were variations in colour and texture of mycelium with malt extract agar,potato dextrose agar and oat meal agar associated with darker colours and rough texture while smooth white mycelia were found in corn meal agar.After considering all nutrient media,malt extract agar was found to be the best media for the growth of Cercospora coffeicola in-vitro.On the basis of our findings,the authors recommend the use of malt extract agar as the primary media for identification and characterisation of Cercospora coffeicola.
文摘Mathematical model is formulated for description of thermophysical processes at laser welding of metal plates for the case when modifying nanoparticles of refractory compounds (nanopowder inoculators – NPI) are introduced into the weld pool. Specially prepared nanoparticles of refractory compounds serve here as crystallization centers, i.e. in fact they are exogenous inoculants on which surface clusters are grouped. This can be used to control the melt crystallization process and formation of its structure, and, therefore, properties of the weld seam. As an example, calculation results of the butt welding of aluminum alloy and steel plates are presented. The results of calculation and experimental data comparison are shown.
基金supported by the Universiti Putra Malaysia Research University Grant Scheme(Project No.03-03-11-1438RU)
文摘Fungi are often used to induce agarwood inAquilariatrees. This study was conducted to evaluate the effect of several fungi on agarwood formation over time in youngAquilaria malaccensis (Lam.) trees. Typical changes in the length and light intensity of the resulting discoloration were observed after three and six month periods following inoculation. Wood samples were observed microscopically and classified into several light intensity groups. The discoloration length was meas-ured longitudinally. The duration after inoculation affected the mean of discoloration length: the 6-month old sample (1.70 cm) had a wider discoloration zone when compared to the 3-month old sample (1.17 cm). When measuring the discoloration intensity, a positive relationship with time was perceived. Digital images, captured using a camera-equipped microscope, revealed that wood samples collected after six months appeared to be 1.8-times darker than after three months. We concluded that time, not the species of any of the tested fungi, had significant effect on discoloration length and intensity. Gas chromatography/mass spec-trometry (GCMS) analysis of the 6-month old sample yielded some important agarwood compounds such as benzylacetone, anisylacetone, guaiene and palustrol. This demonstrates that the tested fungi have the ability to induce agarwood formation in nurseryA. malaccensis trees.
基金TheNationalKeyBasicScienceResearchProjectofChina (No .G1 9990 1 1 80 6)
文摘The effect of inoculation with arbuscular mycorrhizal(AM) fungi( Acaulospora lavis ) on the degradation of di(2 ethylhexyl) phthalate(DEHP) in soil was studies. Cowpea plants (Pigna sinensis) were used as host plants and grown in a specially designed rhizobox. The experimental results indicated that, both in sterile and non sterile soil, mycorrhizal colonization rates were much higher in the mycorrhizal plants than in the non mycorrhizal plants. Addition of 4 mg/kg DEHP slightly affected mycorrhizal colonization, but the addition of 100 mg/kg DEHP significantly decreased mycorrhizal colonization. DEHP degradation in the mycorrhizosphere(Ms) and hyphosphere(Hs), especially in the Hs, increased after inoculation with Acaulospora lavis . It is concluded that mycorrhizal hyphae play an important role in the plant uptake, degradation and translocation of DEHP. The mechanism might be attributed to increased numbers of bacteria and actinomycetes and activity of dehydrogenase, urease and acid phosphatase in the Ms and Hs by mycorrhizal fungi.
基金funded by National Natural Science Foundation of China(project no.31872417)。
文摘Background:Bacillus amyloliquefaciens(BA)and Bacillus subtilis(BS)are usually used as feed supplements directly or bacterial inoculants in biological feeds for animals.However,few research have reported the effects of BA and BS on fermentation characteristics and bacterial community successions of whole-plant corn silage during ensiling.If the BA and BS inoculants have positive effects on silages,then they could not only improve fermentation characteristics,but also deliver BA or BS viable cells to ruminants,which would play its probiotic effect.Therefore,the objectives of this study were to investigate the effects of BA and BS on the fermentation,chemical characteristics,bacterial community and their metabolic pathway of whole-plant corn silage.Results:Freshly chopped whole-plant corn was inoculated without or with BA and BS,respectively,and ensiled for1,3,7,14 and 60 d.Results showed that BA and BS inoculations increased lactic acid concentrations of whole-plant corn silages compared with control,and BA inoculation decreased acetic acid concentrations,whereas BS inoculation decreased fiber contents and increased crude protein(CP)content.Higher water-soluble carbohydrate contents and lower starch contents were observed in BA-and BS-inoculated silages compared with that in control.The decreased CP content and increased non-protein nitrogen content were observed in BA-inoculated silage,which was consistent with the higher amino acid metabolism abundances observed in BA-inoculated silage.In addition,it was noteworthy that BA and BS inoculations increased the metabolism of cofactors and vitamins,and decreased the relative abundances of drug resistance:antimicrobial pathways.We also found that the bacterial metabolism pathways were clearly separated into three clusters based on the ensiling times of whole-plant corn silage in the present study.There were no significant differences in bacterial community compositions among the three groups during ensiling.However,BA and BS inoculations decreased the relative abundances of undesirable bacteria such as Acetobacter and Acinetobacter.Conclusion:Our findings suggested that the BS strain was more suitable as silage inoculants than the BA strain in whole-plant corn silage in this study.
基金This work was supported by the National Natural Science Foundation of China(51871100).
文摘As a potent nucleating substrate forα-Mg grain,MgAl_(2)O_(4) powder was used to inoculate the Mg-Al melt in this study.The effects of MgAl_(2)O_(4)amount,holding time and Al content on the grain size and grain refining ratio of the inoculated Mg-Al alloys are systematically investigated.The results show that the minimum grain size of Mg-3Al alloy is achieved by adding 2wt.%MgAl_(2)O_(4)powder and this alloy exhibits higher grain refining ratio than Mg-5Al and Mg-8Al alloys.The crystallographic misfit calculation indicates the wellmatching and possible orientation relationships(ORs)betweenα-Mg and MgAl_(2)O_(4).Among these predicted ORs,[10–10]α−Mg//[110]MgAl2O4 in(0002)α−Mg//(1–13)MgAl2O4 possesses the smallest misfit,i.e.,2.34%(fr).Both results of the experiment and crystallographic calculation demonstrate that the grain refinement of Mg-Al alloys is attributed to the MgAl_(2)O_(4)particles acting as the heterogeneous nucleation substrates forα-Mg grains.
基金This work was supported by Chinese National Natural Science Foundation Grants 39928018,30070038 and 30130070, National High-tech Development Project (863 Project) 2001AA215391EU Project QLRT 2000 01441.
文摘Objective To understand the infectious characteristics of a hamster-adapted scrapie strain 263K with five different routes of infection including intracerebral (i.e.), intraperitoneal (i.p.), intragastrical (i.g.), intracardiac and intramuscular (i.m.) approaches. Methods Hamsters were infected with crude- or fine-prepared brain extracts. The neuropathological changes, PrPSc deposits, and patterns of PK-resistant PrP were analyzed by HE stain, immunohistochemistry (IHC) assay and Western blot. Reactive gliosis and neuron loss were evaluated by glial fibrillary acidic protein (GFAP) and neuron specific enolase (NSE) specific IHC. Results The animals inoculated in i.m. and Lp. ways with crude PrPSc extracts showed clinical signs at the average incubation of 69.212.8 and 65.5±3.9 days. Inoculation in i.c. and intracardiac ways with fine PrPSc extracts (0.00035 g) caused similar, but relative long incubation of around 90 days. Only one out of eight hamsters challenged in i.g way with low dosage (0.01 g) became ill after a much longer incubation (185 d), while all animals (4/4) with high dosage (0.04 g) developed clinical signs 105 days postinfection. The most remarkable spongiform degeneration and PrPSc deposits were found in brain stem among the five challenge groups generally. The number of GFAP-positive astrocytes increased distinctly in brain stems in all infection groups, while the number of NSE-positive cells decreased significantly in cerebrum, except i.c. group. The patterns of PK-resistant PrP in brains were basically identical among the five infection routes. Conclusion Typical TSE could be induced in hamsters by inoculating strain 263K in the five infection ways. The incubation periods in bioassays depend on infective dosage, administrating pathway and preparation of PrPSc. The neuropathological changes and PrPSc deposits seem to be related with regions and inoculating pathways.
文摘The paper reviews original data obtained by the present authors,revealed in recent separate publications,describing specific procedures for high quality grey irons,and reflecting the forecast needs of the worldwide iron foundry industry.High power,medium frequency coreless induction furnaces are commonly used in electric melting grey iron foundries.This has resulted in low sulphur(<0.05wt.%)and aluminium(<0.005wt.%)contents in the iron,with a potential for higher superheating(>1,500°C),contributing to unfavourable conditions for graphite nucleation.Thin wall castings are increasingly produced by these electric melt shops with a risk of greater eutectic undercooling during solidification.The paper focused on two groups of grey cast irons and their specific problems:carbides and graphite morphology control in lower carbon equivalent high strength irons(CE=3.4%-3.8%),and austenite dendrite promotion in eutectic and slightly hypereutectic irons(CE=4.1%-4.5%),in order to increase their strength characteristics.There are 3 stages and 3 steps involving graphite formation,iron chemistry and iron processing that appear to be important.The concept in the present paper sustains a threestage model for nucleating flake graphite[(Mn,X)S type nuclei].There are three important groups of elements(deoxidizer,Mn/S,and inoculant)and three technological stages in electric melting of iron(superheat,pre-conditioning of base iron,final inoculation).Attention is drawn to a control factor(%Mn)x(%S)ensuring it equals to 0.03–0.06,accompanied by 0.005wt.%–0.010wt.%Al and/or Zr content in inoculated irons.It was found that iron powder addition promotes austenite dendrite formation in eutectic and slightly eutectic,acting as reinforcement for the eutectic cells.But,there is an accompanying possible negative influence on the characteristics of the(Mn,X)S type graphite nuclei(change the morphology of nuclei from polygonal compact to irregular polygonal,and therefore promote chill tendency in treated irons).A double addition(iron powder+inoculant)appears to be an effective treatment to benefit both austenite and graphite nucleation,with positive effects on the final structure and chill tendency.
文摘Cultivation of aerobic granules for simultaneous nitrification and denitrification in two sequencing batch airlift bioreactors was studied. Conventional activated floc and anaerobic granules served as main two inoculated sludge in the systems. Morphological variations of sludge in the reactors were observed. It was found that the cultivation of aerobic granules was closely associated with the kind of inoculated sludge. Round and regular aerobic granules were prevailed in both reactors, and the physical characteristics of the aerobic granules in terms of settling ability, specific gravity, and ratio of water containing were distinct when the inoculate sludge was different. Aerobic granules formed by seeding activated floc are more excellent in simultaneous nitrification and denitrification than that by aerobic granules formed from anaerobic granules. It was concluded that inoculated sludge plays a crucial role in the cultivation of aerobic granules for simultaneous nitrification and denitrification.
基金supported by the National Natural Science Foundation of China(No.51371109)
文摘To investigate the possibility of inoculating eutectic cells, a novel Al-10Si-2Fe master alloy was synthesized and tested in Sr-modifi ed A356 alloy. The new master alloy that consists of α-Al, Si and β-Al5FeSi phases was prepared by a casting process, and the silicon phase was found to grow epitaxially from the β-Al5FeSi particles. The inoculation effi ciency of the new master alloy on Sr-modifi ed A356 alloy has been investigated by quenching experiment and thermal analysis. With the addition of the new master alloy, the area density of eutectic cells is effectively increased by 100% and the eutectic growth temperature is increased by 1.5 oC. Therefore, the new master alloy is deduced to introduce nucleating substrates for eutectic cells and to refi ne the eutectic cells in Sr-modifi ed A356 alloy. There is no poisonous interaction between the Al-10Si-2Fe master alloy and the Sr in this study. Consequently, the mechanical properties have been improved by the addition of the new master alloy.
文摘Dissolved organic matter(DOM) of municipal solid waste(MSW) consists of minerals, water, ash and humic substances, and is known to enhance plant growth. In this study, inoculating microbes(Z J, MS) were used in municipal solid wastes composting, and composting implemented a industrialized technology. During composting, dissolved organic matter was extracted from the compost and purified. The spectral characteristics of dissolved organic matter was determined by fluorescence emission, excitation, and synchronous spectroscopy. Fluorescence emission, excitation, and synchronous spectra characterized by different relative fluorescent intensities and peaks over time. Fluorescence spectra were similar to that of fulvic acid in sewage sludge, indicating the presence of dissolved organic matter with aromatic structures and a high degree of molecular polymerization. Compared with the controls with no microbial inoculation, the microbe-inoculated treatments exhibited the increase of aromatic polycondensation, in the following order: MS + ZJ 〉 ZJ 〉 MS 〉 CK.
基金financially supported by the University of Sri Jayewardenepura,Sri Lanka and Sadaharitha Plantations Limited,Sri Lanka
文摘Gyrinops walla Gaertn. is the only species growing in Sri Lanka that belongs to the agarwood family,Thymelaeaceae. Although agarwood resin induction and extraction from Aquilaria species of the same family have been practised for many decades in Southeast Asian region,the ability of producing agarwood resins in G. walla was discovered recently. Since previous studies were on agarwood resins formed due to natural causes, the present study was conducted to identify the potential fungal species that are capable of artificially inducing agarwood resin formation in G. walla. Since this is the first ever study conducted on artificial inducement of agarwood resin formation in G.walla, Aspergillus niger and Fusarium solani were selected owing to their high abundance in the naturally formed agarwood resinous tissues collected from 25 G. walla trees.Both fungal species were separately grown in yeast extract glucose agar and used to inoculate healthy G. walla trees under aseptic conditions. Three holes were made for each tree and 2 g of fungal culture including the medium were placed in each hole. Tissue discoloration, characteristic aroma, resin content and resin constituents were checked at10 cm intervals above and below the inoculation points for a period of 1 year. Results revealed that tissue discoloration and resin content were higher in the trees inoculated with A. niger. Other than at 10 cm above and below the inoculation points, samples collected at all locations had significantly higher resin contents when inoculated with A. niger compared to F. solani. Sixteen agarwood resin constituents, which were also recorded in Aquilaria species, were identified from the discolored tissues using GC–MS analysis. Jinkohol, agarospirol and 2(2-phenyl)chromone derivatives were found in all discolored tissues collected at 10-cm intervals of the trees inoculated with both fungi. b-Seline, c-eudesmol and valerenal were found in nine of 10 sample points on the stem. c-Elemene was recorded only in one sample. The characteristic aroma during burning was stronger for dark-colored tissues than the light-colored ones. The present study confirmed the potential use of certain fungal species to induce agarwood resin in G. walla and that A. niger is more effective than F.solani.