This paper has researched the insulation characteristics of 10% c-C4F8/N2/CO2 mixtures under lightning impulse voltage by experiment. It is shown that the positive and negative lightning impulse breakdown voltages of ...This paper has researched the insulation characteristics of 10% c-C4F8/N2/CO2 mixtures under lightning impulse voltage by experiment. It is shown that the positive and negative lightning impulse breakdown voltages of 10%c-C4F8/N2/CO2 gas mixtures rise linearly as the electrode gap distance and gas pressure increase and under the same conditions, the positive lightning impulse breakdown voltage of the gas mixtures is always higher than the negative lightning impulse breakdown voltage. As the gas mixtures have a little higher liquefied temperature than SF6 and the comprehensive GWP is about 5% of SF6, and the positive and negative lightning impulse breakdown voltages can both reach 60% of SF6, 10%c-C4F8/N2/CO2 gas mixtures can be applied as insulation gas in electrical equipment such as C-GIS, GIT, GIL and so on.展开更多
The electron swarm parameters including the density-normalized effective ionization coefficients（α-η）/N and the electron drift velocities V e are calculated for a gas mixture of CF3I with N2 and CO2 by solving the...The electron swarm parameters including the density-normalized effective ionization coefficients（α-η）/N and the electron drift velocities V e are calculated for a gas mixture of CF3I with N2 and CO2 by solving the Boltzmann equation in the condition of a steady-state Townsend（SST） experiment.The overall density-reduced electric field strength is from 100 Td to 1000 Td（1 Td = 10-17V·cm2）,while the CF3I content k in the gas mixture can be varied over the range from 0% to 100%.From the variation of（αη）/N with the CF3I mixture ratio k,the limiting field strength（E/N） lim for each CF3I concentration is derived.It is found that for the mixtures with 70% CF3I,the values of（E/N） lim are essentially the same as that for pure SF 6.Additionally,the global warming potential（GWP） and the liquefaction temperature of the gas mixtures are also taken into account to evaluate the possibility of application in the gas insulation of power equipment.展开更多
基金supported by National Natural Science Foundation of China (No. 51337006)
文摘This paper has researched the insulation characteristics of 10% c-C4F8/N2/CO2 mixtures under lightning impulse voltage by experiment. It is shown that the positive and negative lightning impulse breakdown voltages of 10%c-C4F8/N2/CO2 gas mixtures rise linearly as the electrode gap distance and gas pressure increase and under the same conditions, the positive lightning impulse breakdown voltage of the gas mixtures is always higher than the negative lightning impulse breakdown voltage. As the gas mixtures have a little higher liquefied temperature than SF6 and the comprehensive GWP is about 5% of SF6, and the positive and negative lightning impulse breakdown voltages can both reach 60% of SF6, 10%c-C4F8/N2/CO2 gas mixtures can be applied as insulation gas in electrical equipment such as C-GIS, GIT, GIL and so on.
基金Project supported by the National Natural Science Foundation of China (Grant No. 51177101)
文摘The electron swarm parameters including the density-normalized effective ionization coefficients（α-η）/N and the electron drift velocities V e are calculated for a gas mixture of CF3I with N2 and CO2 by solving the Boltzmann equation in the condition of a steady-state Townsend（SST） experiment.The overall density-reduced electric field strength is from 100 Td to 1000 Td（1 Td = 10-17V·cm2）,while the CF3I content k in the gas mixture can be varied over the range from 0% to 100%.From the variation of（αη）/N with the CF3I mixture ratio k,the limiting field strength（E/N） lim for each CF3I concentration is derived.It is found that for the mixtures with 70% CF3I,the values of（E/N） lim are essentially the same as that for pure SF 6.Additionally,the global warming potential（GWP） and the liquefaction temperature of the gas mixtures are also taken into account to evaluate the possibility of application in the gas insulation of power equipment.
