Integrated battery chargers are highly effective for saving costs and improving the power density of on-board chargers in electric vehicles (EVs), However, achieving torque elimination of the commonly used three-phase...Integrated battery chargers are highly effective for saving costs and improving the power density of on-board chargers in electric vehicles (EVs), However, achieving torque elimination of the commonly used three-phase (3p) motors during the fast-charging process is challenging. In this paper, the general torque cancelation law applied in 3p permanent magnet synchronous motors (PMSMs) and induction motors (IMs) is derived to design high power density integrated fast battery chargers. Two novel integrated systems with fast-charging and vehicle-to-grid (V2G) capabilities are proposed based on this law. The main advantages of the proposed systems are: (1) Two filter inductors are constituted by the stator windings while charging, and only one external inductor and several contactors are supplemented to the motor-drive circuit. Therefore, the proposed integrated systems possess high power density;(2) The 3p open-winding (OW) motor is employed, with no need to modify the propulsion system or redesign the interior structure of the motor;(3) Employing an individual controller for each phase of the inner current loop control, the proposed systems realize unity power factors and low current harmonics in the fast-charging and V2G mode. Simulation and experimental results verify the feasibility of the proposed topologies and control strategies.展开更多
Nowadays,there has been an increasing focus on integrated flight propulsion control and the inlet-exhaust design for the aero-propulsion system.Traditional component-level models are inadequate due to installed perfor...Nowadays,there has been an increasing focus on integrated flight propulsion control and the inlet-exhaust design for the aero-propulsion system.Traditional component-level models are inadequate due to installed performance deviations and mismatches between the real engine and the model,failing to meet the accuracy requirements of supersonic conditions.This paper establishes a quasi-one-dimensional model for the inlet-exhaust system and conducts experimental calibration.Additionally,a mechanism-data fusion adaptive modeling scheme using an Extreme Learning Machine based on the Salp Swarm Algorithm(SSA-ELM)is proposed.The study reveals the inlet model’s efficacy in reflecting installed performance,flow matching,and mitigating pressure distortion,while the nozzle model accurately predicts flow coefficients and thrust coefficients,and identifies various operational states.The model’s output closely aligns with typical experimental parameters.By combining offline optimization and online adaptive correction,the mechanismdata fusion adaptive model substantially reduces output errors during regular flights and varying levels of degradation,and effectively handles gradual degradation within a single flight cycle.Notably,the mechanism-data fusion adaptive model holistically addresses total pressure errors within the inlet-exhaust system and normal shock location correction.This approach significantly curbs performance deviations in supersonic conditions.For example,at Ma=2.0,the system error impressively drops from 34.17%to merely 6.54%,while errors for other flight conditions consistently stay below the 2.95%threshold.These findings underscore the clear superiority of the proposed method.展开更多
相较于传统车载充电系统,集成型车载充电系统(integrated onboard charger system,IOCS)在成本、功率密度等方面具备显著优势。文中基于六相永磁电驱系统设计了一台IOCS,并研究了模型预测电流控制(model predictive current control,MP...相较于传统车载充电系统,集成型车载充电系统(integrated onboard charger system,IOCS)在成本、功率密度等方面具备显著优势。文中基于六相永磁电驱系统设计了一台IOCS,并研究了模型预测电流控制(model predictive current control,MPCC)算法在该系统并网模式下的应用。首先,分析所提IOCS的电路拓扑并建立数学模型,同时介绍传统MPCC的实施流程。然后,针对传统MPCC计算量大、稳态性能差等不足,提出一种基于占空比优化的MPCC(MPCC based on duty cycle optimization,DCO-MPCC)策略。一方面,减少备选电压矢量数量,降低电流预测环节带来的计算负担;另一方面,提出一种占空比优化技术,改善系统稳态性能。最后,通过实验验证了所提算法的有效性与优越性。实验结果表明,DCO-MPCC策略能够显著提升系统稳态性能并减少算法计算量。充电与车网互动(vehicle to grid,V2G)工况下,网侧电流总谐波畸变(total harmonic distortion,THD)分别降低6.18%与5.92%,算法运行时间减少17.54μs。展开更多
车载充电机是纯电动汽车(Battery Electric Vehicles,BEVs)和插电式混合动力电动汽车(Plug-in Hybrid Electric Vehicles,PHEVs)必不可少的设备,对于提高电动汽车的充电效率、续航里程有着重要的意义。文章对近年来电动汽车车载充电机...车载充电机是纯电动汽车(Battery Electric Vehicles,BEVs)和插电式混合动力电动汽车(Plug-in Hybrid Electric Vehicles,PHEVs)必不可少的设备,对于提高电动汽车的充电效率、续航里程有着重要的意义。文章对近年来电动汽车车载充电机的研究进展和现状进行了总结,对车载充电机的种类和拓扑结构进行了分析和对比,指出各种拓扑的优点及存在的问题与不足,最后对车载充电机研究的未来发展方向进行了展望。展开更多
基金supported by the Guangdong Provincial Natural Science Research Team Project(2017B030312001).
文摘Integrated battery chargers are highly effective for saving costs and improving the power density of on-board chargers in electric vehicles (EVs), However, achieving torque elimination of the commonly used three-phase (3p) motors during the fast-charging process is challenging. In this paper, the general torque cancelation law applied in 3p permanent magnet synchronous motors (PMSMs) and induction motors (IMs) is derived to design high power density integrated fast battery chargers. Two novel integrated systems with fast-charging and vehicle-to-grid (V2G) capabilities are proposed based on this law. The main advantages of the proposed systems are: (1) Two filter inductors are constituted by the stator windings while charging, and only one external inductor and several contactors are supplemented to the motor-drive circuit. Therefore, the proposed integrated systems possess high power density;(2) The 3p open-winding (OW) motor is employed, with no need to modify the propulsion system or redesign the interior structure of the motor;(3) Employing an individual controller for each phase of the inner current loop control, the proposed systems realize unity power factors and low current harmonics in the fast-charging and V2G mode. Simulation and experimental results verify the feasibility of the proposed topologies and control strategies.
基金co-supported by the National Natural Science Foundation of China(Nos.61890921,61890924)the National Science and Technology Major Project,China(No.J2019-1-0019-0018).
文摘Nowadays,there has been an increasing focus on integrated flight propulsion control and the inlet-exhaust design for the aero-propulsion system.Traditional component-level models are inadequate due to installed performance deviations and mismatches between the real engine and the model,failing to meet the accuracy requirements of supersonic conditions.This paper establishes a quasi-one-dimensional model for the inlet-exhaust system and conducts experimental calibration.Additionally,a mechanism-data fusion adaptive modeling scheme using an Extreme Learning Machine based on the Salp Swarm Algorithm(SSA-ELM)is proposed.The study reveals the inlet model’s efficacy in reflecting installed performance,flow matching,and mitigating pressure distortion,while the nozzle model accurately predicts flow coefficients and thrust coefficients,and identifies various operational states.The model’s output closely aligns with typical experimental parameters.By combining offline optimization and online adaptive correction,the mechanismdata fusion adaptive model substantially reduces output errors during regular flights and varying levels of degradation,and effectively handles gradual degradation within a single flight cycle.Notably,the mechanism-data fusion adaptive model holistically addresses total pressure errors within the inlet-exhaust system and normal shock location correction.This approach significantly curbs performance deviations in supersonic conditions.For example,at Ma=2.0,the system error impressively drops from 34.17%to merely 6.54%,while errors for other flight conditions consistently stay below the 2.95%threshold.These findings underscore the clear superiority of the proposed method.
文摘相较于传统车载充电系统,集成型车载充电系统(integrated onboard charger system,IOCS)在成本、功率密度等方面具备显著优势。文中基于六相永磁电驱系统设计了一台IOCS,并研究了模型预测电流控制(model predictive current control,MPCC)算法在该系统并网模式下的应用。首先,分析所提IOCS的电路拓扑并建立数学模型,同时介绍传统MPCC的实施流程。然后,针对传统MPCC计算量大、稳态性能差等不足,提出一种基于占空比优化的MPCC(MPCC based on duty cycle optimization,DCO-MPCC)策略。一方面,减少备选电压矢量数量,降低电流预测环节带来的计算负担;另一方面,提出一种占空比优化技术,改善系统稳态性能。最后,通过实验验证了所提算法的有效性与优越性。实验结果表明,DCO-MPCC策略能够显著提升系统稳态性能并减少算法计算量。充电与车网互动(vehicle to grid,V2G)工况下,网侧电流总谐波畸变(total harmonic distortion,THD)分别降低6.18%与5.92%,算法运行时间减少17.54μs。
文摘车载充电机是纯电动汽车(Battery Electric Vehicles,BEVs)和插电式混合动力电动汽车(Plug-in Hybrid Electric Vehicles,PHEVs)必不可少的设备,对于提高电动汽车的充电效率、续航里程有着重要的意义。文章对近年来电动汽车车载充电机的研究进展和现状进行了总结,对车载充电机的种类和拓扑结构进行了分析和对比,指出各种拓扑的优点及存在的问题与不足,最后对车载充电机研究的未来发展方向进行了展望。
