Integrated numerical simulation of hydraulic fracturing and production in shale gas well considering gas-water two-phase flow

Based on the displacement discontinuity method and the discrete fracture unified pipe network model,a sequential iterative numerical method was used to build a fracturing-production integrated numerical model of shale gas well considering the two-phase flow of gas and water.The model accounts for the influence of natural fractures and matrix properties on the fracturing process and directly applies post-fracturing formation pressure and water saturation distribution to subsequent well shut-in and production simulation,allowing for a more accurate fracturing-production integrated simulation.The results show that the reservoir physical properties have great impacts on fracture propagation,and the reasonable prediction of formation pressure and reservoir fluid distribution after the fracturing is critical to accurately predict the gas and fluid production of the shale gas wells.Compared with the conventional method,the proposed model can more accurately simulate the water and gas production by considering the impact of fracturing on both matrix pressure and water saturation.The established model is applied to the integrated fracturing-production simulation of practical horizontal shale gas wells.The simulation results are in good agreement with the practical production data,thus verifying the accuracy of the model.

The Model of“Post,Course,Competition,Certificate”Integrated Education for Electronic Information Engineering Technology Major in Higher Vocational Colleges

The core education function of higher vocational colleges is to train technical talents with high quality,so as to meet the needs of talents in the development stage of our society.Under the guidance of talent training,higher vocational colleges need to pay attention to establishing an all-round and three-dimensional education model,and promote innovation of higher vocational education on the basis of this.It is also a way to promote the innovation of higher vocational education to vigorously promote the construction of“post,course,competition,certificate”mode in the construction of education mode.Through the construction of“post,course,competition,certificate”mode,the education mode of higher vocational colleges is gradually improved,so as to strengthen the effectiveness of talent training in higher vocational colleges.Therefore,in this paper,the author puts forward some suggestions to promote the construction of the integrated education mode of the electronic information engineering technology major in higher vocational colleges,so as to help improve the talent training level of higher vocational colleges.

Geospatial Technology Integration in Smart City Frameworks for Achieving Climate Neutrality by 2050: A Case Study of Limassol Municipality, Cyprus

This study investigated the integration of geospatial technologies within smart city frameworks to achieve the European Union’s climate neutrality goals by 2050. Focusing on rapid urbanization and escalating climate challenges, the research analyzed how smart city frameworks, aligned with climate neutrality objectives, leverage geospatial technologies for urban planning and climate action. The study included case studies from three leading European cities, extracting lessons and best practices in implementing Climate City Contracts across sectors like energy, transport, and waste management. These insights highlighted the essential role of EU and national authorities in providing technical, regulatory, and financial support. Additionally, the paper presented the application of a WEBGIS platform in Limassol Municipality, Cyprus, demonstrating citizen engagement and acceptance of the proposed geospatial framework. Concluding with recommendations for future research, the study contributed significant insights into the advancement of urban sustainability and the effectiveness of geospatial technologies in smart city initiatives for combating climate change.

Exploration of Innovation Strategy in the Deep Integration of Information Technology and Education and Teaching

The rapid development of information technology provides a new opportunity and impetus for the reform of education and teaching.Deep integration of information technology and education and teaching is the only way to promote the modernization of education.Starting from the connotation of the deep integration of information technology and education and teaching,this paper analyzes the existing problems in the current integration process,and puts forward innovative strategies from the aspects of concept,resources,model,and evaluation.Through measures such as building a smart teaching environment,enriching high-quality teaching resources,innovating teaching organization models,and establishing multiple evaluation systems,we will realize the deep integration of information technology and teaching,promote the reform of teaching and learning methods,improve the quality of personnel training,and provide strong support for the modernization of education.

Curriculum Reform Practices in “Cosmetic Product Formulation Design and Preparation Technology” Under the Perspective of Integration of Industry, Education, and Research

With the upgrading of industries,the cosmetics industry has posed new requirements for technical talents.As a professional core course in cosmetic technology,“Cosmetic Product Formulation Design and Preparation Technology”serves as the foundation for cultivating students’abilities in cosmetic development and preparation.To foster high-quality skilled talents capable of adapting to the rapid growth of color cosmetics and to better promote the deep integration of scientific and technological industries with curriculum teaching,the teacher team embarked on active explorations and practical teaching research for curriculum teaching reform from four dimensions:strengthening top-level design,enriching teaching content,optimizing teaching design,and reforming assessment methods.These efforts have enhanced students’comprehensive vocational qualities and innovative consciousness,contributing to the teaching reform in higher vocational colleges under the integration of industry,education,and research.

Improving Characteristics of Integrated Switched-Capacitor DC-DC Converter by CMOS Technology

An integrated 3.3V/1.2V SC DC-DC converter operating under 10MHz with a fixed duty radio of 0.5 is presented.To improve the output current of the converter,CMOS technology is adopted to fabricate the switching devices,and mutually compensatory circuitry technology is also employed to double the output current furthermore.The simulation results using Hspice simulation software,show that the output currents of a single unit circuit and two unit circuits connected in a mutually compensatory manner of the improved converter is about 12.5mA and 26mA,respectively.The power conversion efficiency of the mutually compensatory circuit can amount to 73%,while its output voltage ripple is less than 1.5%.The converter is fabricated in standard Rohm 0.35μm CMOS technology in Tokyo University of Japan.The test result indicates that the output current of 9.8mA can be obtained from a single unit circuit of the improved converter.

Application of integrated geophysical techniques in geothermal exploration in Binhai County, Jiangsu Province

Integrated geophysical technology is a necessary and effective means for geothermal exploration.However,integration of geophysical technology for large‐scale surveys with those for geothermal reservoir localization is still in development.This study used the controlled source audio‐frequency magnetotelluric method technology for large‐scale exploration to obtain underground electrical structure information and micromotion detection technology to obtain underground wave velocity structure information.The combination of two detection technologies was used for local identification of geothermal reservoirs.Further,auxiliary correction and inversion constraint were implemented through the audio magnetotelluric sounding technology for maximum authenticity restoration of the near‐and transition‐field data.Through these technology improvements,a geothermal geological model was established for the Binhai County of Jiangsu Province in China and potential geothermal well locations were identified.On this basis,a geothermal well was drilled nearly 3000m deep,with a daily water volume of over 2000m3/day and a geothermal water temperature of 51°C at the well head.It is found that predictions using the above integrated geophysical exploration technology are in good agreement with the well geological formation data.This integrated geophysical technology can be effectively applied for geothermal exploration with high precision and reliability.

Critical Dialogic Accounting and Accountability Through Integrated Popular Reporting and Digital Technologies: The City of Bari

Over the past two decades,dialogic accounting research has evolved into a distinct field,expanding into what is now recognized as critical dialogic accounting and accountability(CDAA).The integration of critical dialogic accounting and accountability acknowledges the growing need to recognize diverse pathways within accounting practices,emphasizing the representation of marginalized perspectives,engagement with power dynamics,and the analysis of conflicts,particularly in the context of societal and environmental impacts.Based on these assumptions,the Integrated Popular Reporting(IPR)is intended as a useful practical dialogic tool designed to impartially represent the viewpoints of different stakeholders.The focus extends beyond traditional dialogic accounting,integrating a newer critical lens that explores the implications of digital technology in the reporting process.To explore these advancements,the study investigates the implementation of the City of Bari’s 2020 Integrated Popular Reporting.Leveraging tools such as Talkwalker and employing a longitudinal,interventionist approach along with semi-structured interviews,the study assesses the effects of digital technologies on the dialogic accounting process.The analysis shows that the use of digital technologies has facilitated a more participatory reporting structure,evident in increased citizen engagement and reduced bureaucratic hurdles.Notably,it has enhanced the accuracy of defining citizens’informational needs and addressed pertinent themes ranging from mobility,economy,digitization,regeneration,and employment.Moreover,it underscores the need to address the digital divide and ensure inclusivity across diverse demographics.Ultimately,it contributes to the ongoing discourse on the role of technology in shaping the future of dialogic accounting and its broader implications for societal accountability.

Application Effect of Integrated Water and Fertilizer Technology for Tomato

Integrated water and fertilizer technology has the advantages of saving water,fertilizer and labour,which is widely applied in tomato plantation. Integrated water and fertilizer technology in topdressing and whole process of big and small tomatoes were studied,and their application effects were contrasted and analyzed,and application advantages and scopes of the two models were concluded.

Development of 0.50μm CMOS Integrated Circuits Technology

Submicron CMOS IC technology, including triple layer resist lithography technology, RIE, LDD, Titanium Salicide, shallow junction, thin gate oxide, no bird's beak isolation and channel's multiple implantation doping technology have been developed. 0.50μm. CMOS integrated circuits have been fabricated using this submicron CMOS process.

Effects of Integrated Technology of Medicine and Fertilizer on Bacterial Wilt of Tobacco

In order to validate the control effects of integrated technology of medicine and fertilizer on tobacco bacterial wilt,field experiments were conducted by using youmeili and tetracycline as the test agents.The results obtained were listed as follows:(1)The incidence rate of bacterial wilt ascended more quickly after July 10 th,the incidence of CK reached 78.30%on July 25 th.(2)The control effect of“youmeili 3 g+tetramycin 200 times liquid”reached 69.47%,significantly higher than other treatments.(3)The output value of“Youmeil 3 g+tetramycin 200 times liquid”served as 1635.66 yuan/667m^2,with the highest economic character in all treatments.In a word,integrated technology of medicine and fertilizer was a feasible approach to control tobacco bacterial wilt.

Study on the Heart Sound Signal Denoising Technology based on Integrated Filtering Algorithm

In the previous studies of heart sounds, the calculation model of small waveform is often used, and new waveform graph is formed through the decomposition and restructuring of small waveform so as to remove the noise from the new waveform. There are a lot of shortcomings in the use of such a method. The features of new waveform are difficult to be controlled, and thus the noise generated by the wave and the interference of wave will be disturbed by the filter to certain degree. In this paper, the integrated faltering algorithm is introduced, and a wave can be used in the studied use of small waveform, and also the high-order algorithm in mathematics is used, so that the frequency is controlled in a certain range, the frequency of heart sounds to be interfered is effectively reduced, and also the harmonic harm generated by the waveform is considered. After the signal sources are protected with some technologies, the effect of filtering and denoising is eventually achieved.

Analysis of the Economical, Ecological and Quality Advantages Consequent Resulting from Initiation of Technology Integrated in Metallurgy

Metallurgical sector plays an important role in the economy of each country because steel products present essential raw material for basic industries. Changes in the sectors of iron, steel and non-ferrous metals and the current development of technology forces the steel mills increased productivity, reduce production costs while ensuring to obtain a product with the required properties and to improve the competitiveness of enterprises in the global market. Currently, the most popular in meeting these requirements, enjoys a method of integration which combines individual operations into one integrated whole. The use of modem, perfectly designed, fully automated design of mechanical, hydraulic and measurement allowed us to achieve an innovative line of production. This article presents the general characteristics of the steel industry and a description of the latest integrated technology currently used in foundries and rolling mills. It also presents examples of the use of integrated technologies in metallurgy and the effects of economic, environmental and quality resulting from their use on an industrial scale.

China Association of Chinese Medicine Paper notice for seminar on clinical application of new technology of integrated Chinese and western medicine in treating sequelae of cerebrovascular diseases

Hosted by ChinaAssociation of Chinese Medicine,and organized by World Journal of Integrated traditional and western Medicine,seminar on clinical application of new technology of integrated Chinese and western medicine in treating sequelae of cerebrovascular diseases is planned to be held in Nanning,Guangxi in August.

Technology and diabetes self-management: An integrative review

Technology can be used to supplement healthcare provider diabetes care by providing both educational and motivational support. Education can be provided using technology allowing patients to learn new practices and routines related to diabetes management. Technology can support daily diabetes self-management activities including blood glucose monitoring, exercising, healthy eating, taking medication, monitoring for complications, and problem-solving. This article describes an integrative review conducted to evaluate the types of technology being used to facilitate diabetes self-management and the effect of that technology on self-management and diabetes outcomes for adults living with type 2 diabetes mellitus. A literature review was conducted by searching Medline, Pub Med, and Psych INFO databases using the search terms: diabetes self-management, technology, type 2 diabetes, smartphones, cell phones, and diabetes mellitus covering the years from 2008-2013. Articles relying on secondary data(editorials, systematic reviews) and articles describing study protocol only were excluded. Fourteen studies including qualitative, quasiexperimental, and randomized controlled trial designs were identified and included in the review. The review found that technological interventions had positive impacts on diabetes outcomes including improvements in hemoglobin A1 C levels, diabetes self-management behaviors, and diabetes self-efficacy. Results indicate that technological interventions can benefit people living with diabetes when used in conjunction with diabetes care delivered by healthcare providers.

Two-phase nonlocal integral models with a bi-Helmholtz averaging kernel for nanorods

In this work,the static tensile and free vibration of nanorods are studied via both the strain-driven(Strain D)and stress-driven(Stress D)two-phase nonlocal models with a bi-Helmholtz averaging kernel.Merely adjusting the limits of integration,the integral constitutive equation of the Fredholm type is converted to that of the Volterra type and then solved directly via the Laplace transform technique.The unknown constants can be uniquely determined through the standard boundary conditions and two constrained conditions accompanying the Laplace transform process.In the numerical examples,the bi-Helmholtz kernel-based Strain D(or Stress D)two-phase model shows consistently softening(or stiffening)effects on both the tension and the free vibration of nanorods with different boundary edges.The effects of the two nonlocal parameters of the bi-Helmholtz kernel-based two-phase nonlocal models are studied and compared with those of the Helmholtz kernel-based models.

Establishment and Application of Urbanization Strategic Environ-mental Assessment Integration Technology System

Urbanization strategic environmental assessment (SEA) is an effective instrument to enhance the harmo-nious development of urban complex system, integrating of environment and development in decision-making. Ur-banization strategic environmental assessment integration technology system (SEA-ITS) is composed of "3S" (RS, GIS and GPS), environmental expert system and environmental model system, coupling with appropriate SEA working process closely. In this paper, the structure and components of SEA-ITS are analyzed based on Chinese characteristics, meanwhile methods to fulfill the following system functions are discussed: urbanization SEA in-quiring, analysis, discrimination, assessment, prediction, decision-making and output. Moreover, methods and tech-nologies employed in different urbanization SEA hierarchies are summarized. As a case study, urbanization SEA-ITS is applied in Changchun City to solving complex real problems. Methods such as system dynamics and grey cluster are adopted to achieve the environmental impact assessment on the eco-industrial system planning. It is revealed that the system designed is capable of reflecting the dynamic behavior of eco-industrial system under different sce-narios, meanwhile accomplishing strategy optimization and supplying scientific reference. The 4th strategy, namely concerning on economy increase and its interaction with science, technology and environment progress, would have the best efficiency. Further, more attention should be paid to the secondary development of integration techniques and function modification system of urbanization SEA-ITS.

Multi Model Technology and Its Application in the Integration of CAD/CAM/CAE

The globalization and the intensive competition of th e automotive market require shortening the product development cycle, improving the quality and reducing the cost. Optimizing the product development process, b uilding product’s consistent defining model for life cycle, and realizing the in tegration of CAD/CAM/CAE and Concurrent Engineering (CE) become the means to acc ept the challenge. A new product modeling technology, Multi Model Technology (MM T), is provided in this paper to meet the needs of the challenge for automotive powertrain product development. First, the paper introduces the concept of Multi Model Technology. MMT introduce s Object-oriented Technology (OT) into product modeling process and combine OT with feature-based modeling technology. With the help of OT, MMT builds product object model to support system level management in product development. The obj ect model of the product is a Multi Model Structure. The MMS consists of finish part model level (assembly model level), rough part model level (part model leve l), function model level and basic model level. Every models in the MMS is creat ed by feature-based technology in design process. In this case, models in the M MS of product can be shared by casting mould, sand core and sand core mould. The refore, CAD engineers, CAE engineers and CAM engineers can work concurrently and the integration of CAD/CAM/CAE can be realized. Second, MMT is applied in cylinder head development. The multi model structures of cylinder head, its casting mould, sand core and sand core mould are built, an d the process-oriented feature models of every objects in the multi model struc tures are modeled, the application of different model objects in development pro cess is analyzed. The integrated modeling technology of cylinder head, its casti ng mould, sand core and sand core mould under MMT is studied. And the concurrent engineering oriented integration method of CAD/CAE and the method to realize th e integration of CAD/CAE under MMT are also discussed. Based on above, the integ ration of CAD/CAM/CAE of cylinder head is realized in automotive powertrain prod uct. The practice results shows that the modeling technology in this paper can optimi ze the development process, realize the data sharing and concurrent engineering in the product development process.

The 8×10 GHz Receiver Optical Subassembly Based on Silica Hybrid Integration Technology for Data Center Interconnection

An 8×10 GHz receiver optical sub-assembly （ROSA） consisting of an 8-channel arrayed waveguide grating （AWG） and an 8-channel PIN photodetector （PD） array is designed and fabricated based on silica hybrid integration technology. Multimode output waveguides in the silica AWG with 2% refractive index difference are used to obtain fiat-top spectra. The output waveguide facet is polished to 45° bevel to change the light propagation direction into the mesa-type PIN PD, which simplifies the packaging process. The experimentM results show that the single channel I dB bandwidth of AWG ranges from 2.12nm to 3.06nm, the ROSA responsivity ranges from 0.097 A/W to 0.158A/W, and the 3dB bandwidth is up to 11 GHz. It is promising to be applied in the eight-lane WDM transmission system in data center interconnection.

Solar Energy and Residential Building Integration Technology and Application

Building energy saving needs solar energy, but the promotion of solar energy has to be integrated with the constructions. Through analyzing the energy-saving significance of solar energy, and the status and features of it, this paper has discussed the solar energy and building integration technology and application in the residential building, and explored a new way and thinking for the close combination of the solar technology and residence.