Aimed at improving the real-time performance of guidance instruction generation,an analytical hypersonic reentry guidance framework is presented.The key steps of the novel guidance framework are the parameterization o...Aimed at improving the real-time performance of guidance instruction generation,an analytical hypersonic reentry guidance framework is presented.The key steps of the novel guidance framework are the parameterization of reentry guidance problems and the optimization of parameters.First,a quintic polynomial function of energy was designed to describe the altitude profile.Then,according to the altitude-energy profile,the altitude,velocity,flight path angle,and bank angle were obtained analytically,which naturally met the terminal constraints.In addition,the angle of the attack profile was determined using the velocity parameter.The swarm intelligent optimization algorithms were used to optimize the parameters.The path constraints were enforced by the penalty function method.Finally,extensive simulations were carried out in both nominal and dispersed cases,and the simulation results showed that the proposed guidance framework was effective,high-precision,and robust in different scenarios.展开更多
Ultra-low permeability reservoirs are characterized by small pore throats and poor physical properties, which areat the root of well-known problems related to injection and production. In this study, a gas injection f...Ultra-low permeability reservoirs are characterized by small pore throats and poor physical properties, which areat the root of well-known problems related to injection and production. In this study, a gas injection floodingapproach is analyzed in the framework of numerical simulations. In particular, the sequence and timing of fracturechanneling and the related impact on production are considered for horizontal wells with different fracturemorphologies. Useful data and information are provided about the regulation of gas channeling and possible strategiesto delay gas channeling and optimize the gas injection volume and fracture parameters. It is shown that inorder to mitigate gas channeling and ensure high production, fracture length on the sides can be controlled andlonger fractures can be created in the middle by which full gas flooding is obtained at the fracture location in themiddle of the horizontal well. A Differential Evolution (DE) algorithm is provided by which the gas injectionvolume and the fracture parameters of gas injection flooding can be optimized. It is shown that an improvedoil recovery factor as high as 6% can be obtained.展开更多
Intelligent optimization algorithm belongs to a kind of emerging technology,show good characteristics,such as high performance,applicability,its algorithm includes many contents,including genetic,particle swarm and ar...Intelligent optimization algorithm belongs to a kind of emerging technology,show good characteristics,such as high performance,applicability,its algorithm includes many contents,including genetic,particle swarm and artificial neural network algorithm,compared with the traditional optimization way,these algorithms can be applied to a variety of situations,meet the demand of solution,in the mechanical design industry has wide application prospects.This paper analyzes the application of the algorithm in mechanical design and the comparison of the results to verify the significance of the intelligent optimization algorithm in mechanical design.展开更多
Discrete Tomography(DT)is a technology that uses image projection to reconstruct images.Its reconstruction problem,especially the binary image(0–1matrix)has attracted strong attention.In this study,a fixed point iter...Discrete Tomography(DT)is a technology that uses image projection to reconstruct images.Its reconstruction problem,especially the binary image(0–1matrix)has attracted strong attention.In this study,a fixed point iterative method of integer programming based on intelligent optimization is proposed to optimize the reconstructedmodel.The solution process can be divided into two procedures.First,the DT problem is reformulated into a polyhedron judgment problembased on lattice basis reduction.Second,the fixed-point iterativemethod of Dang and Ye is used to judge whether an integer point exists in the polyhedron of the previous program.All the programs involved in this study are written in MATLAB.The final experimental data show that this method is obviously better than the branch and bound method in terms of computational efficiency,especially in the case of high dimension.The branch and bound method requires more branch operations and takes a long time.It also needs to store a large number of leaf node boundaries and the corresponding consumptionmatrix,which occupies a largememory space.展开更多
Four intelligent optimization algorithms are compared by searching for control pulses to achieve the preparation of target quantum states for closed and open quantum systems, which include differential evolution(DE), ...Four intelligent optimization algorithms are compared by searching for control pulses to achieve the preparation of target quantum states for closed and open quantum systems, which include differential evolution(DE), particle swarm optimization(PSO), quantum-behaved particle swarm optimization(QPSO), and quantum evolutionary algorithm(QEA).We compare their control performance and point out their differences. By sampling and learning for uncertain quantum systems, the robustness of control pulses found by these four algorithms is also demonstrated and compared. The resulting research shows that the QPSO nearly outperforms the other three algorithms for all the performance criteria considered.This conclusion provides an important reference for solving complex quantum control problems by optimization algorithms and makes the QPSO be a powerful optimization tool.展开更多
Statistical distributions are used to model wind speed,and the twoparameters Weibull distribution has proven its effectiveness at characterizing wind speed.Accurate estimation of Weibull parameters,the scale(c)and sha...Statistical distributions are used to model wind speed,and the twoparameters Weibull distribution has proven its effectiveness at characterizing wind speed.Accurate estimation of Weibull parameters,the scale(c)and shape(k),is crucial in describing the actual wind speed data and evaluating the wind energy potential.Therefore,this study compares the most common conventional numerical(CN)estimation methods and the recent intelligent optimization algorithms(IOA)to show how precise estimation of c and k affects the wind energy resource assessments.In addition,this study conducts technical and economic feasibility studies for five sites in the northern part of Saudi Arabia,namely Aljouf,Rafha,Tabuk,Turaif,and Yanbo.Results exhibit that IOAs have better performance in attaining optimal Weibull parameters and provided an adequate description of the observed wind speed data.Also,with six wind turbine technologies rating between 1 and 3MW,the technical and economic assessment results reveal that the CN methods tend to overestimate the energy output and underestimate the cost of energy($/kWh)compared to the assessments by IOAs.The energy cost analyses show that Turaif is the windiest site,with an electricity cost of$0.016906/kWh.The highest wind energy output is obtained with the wind turbine having a rated power of 2.5 MW at all considered sites with electricity costs not exceeding$0.02739/kWh.Finally,the outcomes of this study exhibit the potential of wind energy in Saudi Arabia,and its environmental goals can be acquired by harvesting wind energy.展开更多
In this paper, we present a new fruit fly optimization algorithm with the adaptive step for solving unconstrained optimization problems, which is able to avoid the slow convergence and the tendency to fall into local ...In this paper, we present a new fruit fly optimization algorithm with the adaptive step for solving unconstrained optimization problems, which is able to avoid the slow convergence and the tendency to fall into local optimum of the standard fruit fly optimization algorithm. By using the information of the iteration number and the maximum iteration number, the proposed algorithm uses the floor function to ensure that the fruit fly swarms adopt the large step search during the olfactory search stage which improves the search speed;in the visual search stage, the small step is used to effectively avoid local optimum. Finally, using commonly used benchmark testing functions, the proposed algorithm is compared with the standard fruit fly optimization algorithm with some fixed steps. The simulation experiment results show that the proposed algorithm can quickly approach the optimal solution in the olfactory search stage and accurately search in the visual search stage, demonstrating more effective performance.展开更多
With the development of information technology,a large number of product quality data in the entire manufacturing process is accumulated,but it is not explored and used effectively.The traditional product quality pred...With the development of information technology,a large number of product quality data in the entire manufacturing process is accumulated,but it is not explored and used effectively.The traditional product quality prediction models have many disadvantages,such as high complexity and low accuracy.To overcome the above problems,we propose an optimized data equalization method to pre-process dataset and design a simple but effective product quality prediction model:radial basis function model optimized by the firefly algorithm with Levy flight mechanism(RBFFALM).First,the new data equalization method is introduced to pre-process the dataset,which reduces the dimension of the data,removes redundant features,and improves the data distribution.Then the RBFFALFM is used to predict product quality.Comprehensive expe riments conducted on real-world product quality datasets validate that the new model RBFFALFM combining with the new data pre-processing method outperforms other previous me thods on predicting product quality.展开更多
Hyperspectral image classification stands as a pivotal task within the field of remote sensing,yet achieving highprecision classification remains a significant challenge.In response to this challenge,a Spectral Convol...Hyperspectral image classification stands as a pivotal task within the field of remote sensing,yet achieving highprecision classification remains a significant challenge.In response to this challenge,a Spectral Convolutional Neural Network model based on Adaptive Fick’s Law Algorithm(AFLA-SCNN)is proposed.The Adaptive Fick’s Law Algorithm(AFLA)constitutes a novel metaheuristic algorithm introduced herein,encompassing three new strategies:Adaptive weight factor,Gaussian mutation,and probability update policy.With adaptive weight factor,the algorithmcan adjust theweights according to the change in the number of iterations to improve the performance of the algorithm.Gaussianmutation helps the algorithm avoid falling into local optimal solutions and improves the searchability of the algorithm.The probability update strategy helps to improve the exploitability and adaptability of the algorithm.Within the AFLA-SCNN model,AFLA is employed to optimize two hyperparameters in the SCNN model,namely,“numEpochs”and“miniBatchSize”,to attain their optimal values.AFLA’s performance is initially validated across 28 functions in 10D,30D,and 50D for CEC2013 and 29 functions in 10D,30D,and 50D for CEC2017.Experimental results indicate AFLA’s marked performance superiority over nine other prominent optimization algorithms.Subsequently,the AFLA-SCNN model was compared with the Spectral Convolutional Neural Network model based on Fick’s Law Algorithm(FLA-SCNN),Spectral Convolutional Neural Network model based on Harris Hawks Optimization(HHO-SCNN),Spectral Convolutional Neural Network model based onDifferential Evolution(DE-SCNN),SpectralConvolutionalNeuralNetwork(SCNN)model,and SupportVector Machines(SVM)model using the Indian Pines dataset and PaviaUniversity dataset.The experimental results show that the AFLA-SCNN model outperforms other models in terms of Accuracy,Precision,Recall,and F1-score on Indian Pines and Pavia University.Among them,the Accuracy of the AFLA-SCNN model on Indian Pines reached 99.875%,and the Accuracy on PaviaUniversity reached 98.022%.In conclusion,our proposed AFLA-SCNN model is deemed to significantly enhance the precision of hyperspectral image classification.展开更多
This research proposes a highly effective soft computing paradigm for estimating the compressive strength(CS)of metakaolin-contained cemented materials.The proposed approach is a combination of an enhanced grey wolf o...This research proposes a highly effective soft computing paradigm for estimating the compressive strength(CS)of metakaolin-contained cemented materials.The proposed approach is a combination of an enhanced grey wolf optimizer(EGWO)and an extreme learning machine(ELM).EGWO is an augmented form of the classic grey wolf optimizer(GWO).Compared to standard GWO,EGWO has a better hunting mechanism and produces an optimal performance.The EGWO was used to optimize the ELM structure and a hybrid model,ELM-EGWO,was built.To train and validate the proposed ELM-EGWO model,a sum of 361 experimental results featuring five influencing factors was collected.Based on sensitivity analysis,three distinct cases of influencing parameters were considered to investigate the effect of influencing factors on predictive precision.Experimental consequences show that the constructed ELM-EGWO achieved the most accurate precision in both training(RMSE=0.0959)and testing(RMSE=0.0912)phases.The outcomes of the ELM-EGWO are significantly superior to those of deep neural networks(DNN),k-nearest neighbors(KNN),long short-term memory(LSTM),and other hybrid ELMs constructed with GWO,particle swarm optimization(PSO),harris hawks optimization(HHO),salp swarm algorithm(SSA),marine predators algorithm(MPA),and colony predation algorithm(CPA).The overall results demonstrate that the newly suggested ELM-EGWO has the potential to estimate the CS of metakaolin-contained cemented materials with a high degree of precision and robustness.展开更多
To realize the requirement of diagnostic sequence optimization in the process of design for testability, the authors put forward an optimization method based on quantum-behaved particle swarm optimization (QPSO) alg...To realize the requirement of diagnostic sequence optimization in the process of design for testability, the authors put forward an optimization method based on quantum-behaved particle swarm optimization (QPSO) algorithm. By a precedence ordering coding, the diagnostic sequence optimization can be translated into a precedence ordering problem in the multidimensional space of swarm. It can get the optimizing order quickly by using the powerful and quick search capability of QPSO algorithm, and the order is the diagnostic sequence for the system. The realization of the method is simpler than other methods, and the results are more excellent than others, and it has been applied in the engineering practice.展开更多
A concept of an intelligent optimal design approach is proposed, which isorganized by a kind of compound knowledge model. The compound knowledge consists of modularizedquantitative knowledge, inclusive experience know...A concept of an intelligent optimal design approach is proposed, which isorganized by a kind of compound knowledge model. The compound knowledge consists of modularizedquantitative knowledge, inclusive experience knowledge and case-based sample knowledge. By usingthis compound knowledge model, the abundant quantity information of mathematical programming and thesymbolic knowledge of artificial intelligence can be united together in this model. The intelligentoptimal design model based on such a compound knowledge and the automatically generateddecomposition principles based on it are also presented. Practically, it is applied to theproduction planning, process schedule and optimization of production process of a refining &chemical work and a great profit is achieved. Specially, the methods and principles are adaptablenot only to continuous process industry, but also to discrete manufacturing one.展开更多
Accurate stereo vision calibration is a preliminary step towards high-precision visual posi- tioning of robot. Combining with the characteristics of genetic algorithm (GA) and particle swarm optimization (PSO), a ...Accurate stereo vision calibration is a preliminary step towards high-precision visual posi- tioning of robot. Combining with the characteristics of genetic algorithm (GA) and particle swarm optimization (PSO), a three-stage calibration method based on hybrid intelligent optimization is pro- posed for nonlinear camera models in this paper. The motivation is to improve the accuracy of the calibration process. In this approach, the stereo vision calibration is considered as an optimization problem that can be solved by the GA and PSO. The initial linear values can be obtained in the frost stage. Then in the second stage, two cameras' parameters are optimized separately. Finally, the in- tegrated optimized calibration of two models is obtained in the third stage. Direct linear transforma- tion (DLT), GA and PSO are individually used in three stages. It is shown that the results of every stage can correctly find near-optimal solution and it can be used to initialize the next stage. Simula- tion analysis and actual experimental results indicate that this calibration method works more accu- rate and robust in noisy environment compared with traditional calibration methods. The proposed method can fulfill the requirements of robot sophisticated visual operation.展开更多
With the continuous improvement of radar intelligence, it is difficult for traditional countermeasures to achieve ideal results. In order to deal with complex, changeable, and unknown threat signals in the complex ele...With the continuous improvement of radar intelligence, it is difficult for traditional countermeasures to achieve ideal results. In order to deal with complex, changeable, and unknown threat signals in the complex electromagnetic environment, a waveform intelligent optimization model based on intelligent optimization algorithm is proposed. By virtue of the universality and fast running speed of the intelligent optimization algorithm, the model can optimize the parameters used to synthesize the countermeasure waveform according to different external signals, so as to improve the countermeasure performance.Genetic algorithm(GA) and particle swarm optimization(PSO)are used to simulate the intelligent optimization of interruptedsampling and phase-modulation repeater waveform. The experimental results under different radar signal conditions show that the scheme is feasible. The performance comparison between the algorithms and some problems in the experimental results also provide a certain reference for the follow-up work.展开更多
In this study,related models of alloy purchasing decision system in the Baoshan base of Baosteel are discussed.First,the corresponding relationship between steel grades and alloy consumption is established through met...In this study,related models of alloy purchasing decision system in the Baoshan base of Baosteel are discussed.First,the corresponding relationship between steel grades and alloy consumption is established through metallurgical-mechanism modeling and statistical analysis.Then,the alloy-demand prediction model based on alloy unit consumption and time series analysis is developed by combining sales plans and historical data.Finally,the alloy purchasing and inventory optimization model is developed to minimize the total cost of purchase and storage by combining inventory optimization theories.展开更多
In the Acoustics channel,it is incredibly challenging to offer data transfer for time-sourced applications in an energy-efficient manner due to higher error rate and propagation delay.Subsequently,conventional re-tran...In the Acoustics channel,it is incredibly challenging to offer data transfer for time-sourced applications in an energy-efficient manner due to higher error rate and propagation delay.Subsequently,conventional re-transmission over any failure generally initiates significantly larger end-to-end delay,and therefore it is not probable for time-based services.Moreover,standard techniques without any re-transmission consume enormous energy.This investigation proposes a novel multi-hop energy-aware transmission-based intelligent water wave optimization strategy.It ensures reduced end-to-end while attaining potential amongst overall energy efficiency end-to-end packet delay.It merges a naturally inspired meta-heuristic approach with multi-hop routing for data packets to reach the destination.The appropriate design of this Meta heuristic-based energy-aware scheme consumes lesser energy than the conventional one-hop transmission strategy without re-transmission.However,there is no hop-by-hop re-transmission facilitated.The proposed model shows only lesser delay than conventional methods with re-transmission.This work facilitates extensive work to carry out the proposed model performance with the MATLAB simulation environment.The results illustrate that the model is exceptionally energyefficient with lesser packet delays.With 500 nodes,the packet delivery ratio of proposed model is 100%,average delay is reduced by 2%,total energy consumption is 8 J,average packet redundancy is 1.856,and idle energy is 6.9Mwh.The proposed model outperforms existing approaches like OSF,AOR,and DMR respectively.展开更多
The grey wolf optimizer(GWO)is a swarm-based intelligence optimization algorithm by simulating the steps of searching,encircling,and attacking prey in the process of wolf hunting.Along with its advantages of simple pr...The grey wolf optimizer(GWO)is a swarm-based intelligence optimization algorithm by simulating the steps of searching,encircling,and attacking prey in the process of wolf hunting.Along with its advantages of simple principle and few parameters setting,GWO bears drawbacks such as low solution accuracy and slow convergence speed.A few recent advanced GWOs are proposed to try to overcome these disadvantages.However,they are either difficult to apply to large-scale problems due to high time complexity or easily lead to early convergence.To solve the abovementioned issues,a high-accuracy variable grey wolf optimizer(VGWO)with low time complexity is proposed in this study.VGWO first uses the symmetrical wolf strategy to generate an initial population of individuals to lay the foundation for the global seek of the algorithm,and then inspired by the simulated annealing algorithm and the differential evolution algorithm,a mutation operation for generating a new mutant individual is performed on three wolves which are randomly selected in the current wolf individuals while after each iteration.A vectorized Manhattan distance calculation method is specifically designed to evaluate the probability of selecting the mutant individual based on its status in the current wolf population for the purpose of dynamically balancing global search and fast convergence capability of VGWO.A series of experiments are conducted on 19 benchmark functions from CEC2014 and CEC2020 and three real-world engineering cases.For 19 benchmark functions,VGWO’s optimization results place first in 80%of comparisons to the state-of-art GWOs and the CEC2020 competition winner.A further evaluation based on the Friedman test,VGWO also outperforms all other algorithms statistically in terms of robustness with a better average ranking value.展开更多
A two-layer implicit difference scheme is employed in the present study to determine the temperature distribution in an asphalt pavement.The calculation of each layer only needs four iterations to achieve convergence....A two-layer implicit difference scheme is employed in the present study to determine the temperature distribution in an asphalt pavement.The calculation of each layer only needs four iterations to achieve convergence.Furthermore,in order to improve the calculation accuracy a swarm intelligence optimization algorithm is also exploited to inversely analyze the laws by which the thermal physical parameters of the asphalt pavement materials change with temperature.Using the basic cuckoo and the gray wolf algorithms,an adaptive hybrid optimization algorithm is obtained and used to determine the relationship between the thermal diffusivity of two types of asphalt pavement materials and the temperature.As shown by the results,the prediction accuracy achievable with this approach is higher than that of the linear model.展开更多
A new thermal protection design method for hypersonic vehicle's leading edge is proposed, which can effectively reduce temperature of the leading edge without additional cooling measures. This method reduces the l...A new thermal protection design method for hypersonic vehicle's leading edge is proposed, which can effectively reduce temperature of the leading edge without additional cooling measures. This method reduces the leading-edge's temperature by the multi-scale collaborative design of the macroscopic thermal optimization and the mesoscopic woven structures of Three-dimensional Orthogonal Woven Ceramic Matrix Composites(TOCMC). The macroscopic thermal optimization is achieved by designing different mesoscopic woven structures in different regions to create combined heat transfer channels to dredge the heat. The combined heat transfer channel is macroscopically represented by the anisotropic thermal conductivity of TOCMC. The thermal optimization multiple linear regression model is established to optimize the heat transport channel, which predicts Theoretical Optimal Thermal Conductivity Configuration(TOTCC) in different regions to achieve the lowest leading-edge temperature. The function-oriented mesostructure design method is invented to design the corresponding mesostructure of TOCMC according to the TOTCC, which consists of universal thermal conductivity prediction formulas for TOCMC. These universal formulas are firstly derived based on the thermal resistance network method, which is verified by experiments with an error of 6.25%. The results show that the collaborative design method can effectively reduce the leading edge temperature by about 12.8% without adding cooling measures.展开更多
An increasing number of enterprises have adopted cloud computing to manage their important business applications in distributed green cloud(DGC)systems for low response time and high cost-effectiveness in recent years...An increasing number of enterprises have adopted cloud computing to manage their important business applications in distributed green cloud(DGC)systems for low response time and high cost-effectiveness in recent years.Task scheduling and resource allocation in DGCs have gained more attention in both academia and industry as they are costly to manage because of high energy consumption.Many factors in DGCs,e.g.,prices of power grid,and the amount of green energy express strong spatial variations.The dramatic increase of arriving tasks brings a big challenge to minimize the energy cost of a DGC provider in a market where above factors all possess spatial variations.This work adopts a G/G/1 queuing system to analyze the performance of servers in DGCs.Based on it,a single-objective constrained optimization problem is formulated and solved by a proposed simulated-annealing-based bees algorithm(SBA)to find SBA can minimize the energy cost of a DGC provider by optimally allocating tasks of heterogeneous applications among multiple DGCs,and specifying the running speed of each server and the number of powered-on servers in each GC while strictly meeting response time limits of tasks of all applications.Realistic databased experimental results prove that SBA achieves lower energy cost than several benchmark scheduling methods do.展开更多
基金co-supported by the National Natural Science Foundation of China(No.61773387)Tianjin Natural Science Foundation,China(No.20JCYBJC00880)。
文摘Aimed at improving the real-time performance of guidance instruction generation,an analytical hypersonic reentry guidance framework is presented.The key steps of the novel guidance framework are the parameterization of reentry guidance problems and the optimization of parameters.First,a quintic polynomial function of energy was designed to describe the altitude profile.Then,according to the altitude-energy profile,the altitude,velocity,flight path angle,and bank angle were obtained analytically,which naturally met the terminal constraints.In addition,the angle of the attack profile was determined using the velocity parameter.The swarm intelligent optimization algorithms were used to optimize the parameters.The path constraints were enforced by the penalty function method.Finally,extensive simulations were carried out in both nominal and dispersed cases,and the simulation results showed that the proposed guidance framework was effective,high-precision,and robust in different scenarios.
基金supported by the Forward Looking Basic Major Scientific and Technological Projects of CNPC (Grant No.2021DJ2202).
文摘Ultra-low permeability reservoirs are characterized by small pore throats and poor physical properties, which areat the root of well-known problems related to injection and production. In this study, a gas injection floodingapproach is analyzed in the framework of numerical simulations. In particular, the sequence and timing of fracturechanneling and the related impact on production are considered for horizontal wells with different fracturemorphologies. Useful data and information are provided about the regulation of gas channeling and possible strategiesto delay gas channeling and optimize the gas injection volume and fracture parameters. It is shown that inorder to mitigate gas channeling and ensure high production, fracture length on the sides can be controlled andlonger fractures can be created in the middle by which full gas flooding is obtained at the fracture location in themiddle of the horizontal well. A Differential Evolution (DE) algorithm is provided by which the gas injectionvolume and the fracture parameters of gas injection flooding can be optimized. It is shown that an improvedoil recovery factor as high as 6% can be obtained.
文摘Intelligent optimization algorithm belongs to a kind of emerging technology,show good characteristics,such as high performance,applicability,its algorithm includes many contents,including genetic,particle swarm and artificial neural network algorithm,compared with the traditional optimization way,these algorithms can be applied to a variety of situations,meet the demand of solution,in the mechanical design industry has wide application prospects.This paper analyzes the application of the algorithm in mechanical design and the comparison of the results to verify the significance of the intelligent optimization algorithm in mechanical design.
基金funded by the NSFC under Grant Nos.61803279,71471091,62003231 and 51874205in part by the Qing Lan Project of Jiangsu,in part by the China Postdoctoral Science Foundation under Grant Nos.2020M671596 and 2021M692369+2 种基金in part by the Suzhou Science and Technology Development Plan Project(Key Industry Technology Innovation)under Grant No.SYG202114in part by the Natural Science Foundation of Jiangsu Province under Grant No.BK20200989Postdoctoral Research Funding Program of Jiangsu Province.
文摘Discrete Tomography(DT)is a technology that uses image projection to reconstruct images.Its reconstruction problem,especially the binary image(0–1matrix)has attracted strong attention.In this study,a fixed point iterative method of integer programming based on intelligent optimization is proposed to optimize the reconstructedmodel.The solution process can be divided into two procedures.First,the DT problem is reformulated into a polyhedron judgment problembased on lattice basis reduction.Second,the fixed-point iterativemethod of Dang and Ye is used to judge whether an integer point exists in the polyhedron of the previous program.All the programs involved in this study are written in MATLAB.The final experimental data show that this method is obviously better than the branch and bound method in terms of computational efficiency,especially in the case of high dimension.The branch and bound method requires more branch operations and takes a long time.It also needs to store a large number of leaf node boundaries and the corresponding consumptionmatrix,which occupies a largememory space.
基金supported by the National Natural Science Foundation of China (Grant No. 61873251)。
文摘Four intelligent optimization algorithms are compared by searching for control pulses to achieve the preparation of target quantum states for closed and open quantum systems, which include differential evolution(DE), particle swarm optimization(PSO), quantum-behaved particle swarm optimization(QPSO), and quantum evolutionary algorithm(QEA).We compare their control performance and point out their differences. By sampling and learning for uncertain quantum systems, the robustness of control pulses found by these four algorithms is also demonstrated and compared. The resulting research shows that the QPSO nearly outperforms the other three algorithms for all the performance criteria considered.This conclusion provides an important reference for solving complex quantum control problems by optimization algorithms and makes the QPSO be a powerful optimization tool.
基金The author extends his appreciation to theDeputyship forResearch&Innovation,Ministry of Education,Saudi Arabia for funding this research work through the Project Number(QUIF-4-3-3-33891)。
文摘Statistical distributions are used to model wind speed,and the twoparameters Weibull distribution has proven its effectiveness at characterizing wind speed.Accurate estimation of Weibull parameters,the scale(c)and shape(k),is crucial in describing the actual wind speed data and evaluating the wind energy potential.Therefore,this study compares the most common conventional numerical(CN)estimation methods and the recent intelligent optimization algorithms(IOA)to show how precise estimation of c and k affects the wind energy resource assessments.In addition,this study conducts technical and economic feasibility studies for five sites in the northern part of Saudi Arabia,namely Aljouf,Rafha,Tabuk,Turaif,and Yanbo.Results exhibit that IOAs have better performance in attaining optimal Weibull parameters and provided an adequate description of the observed wind speed data.Also,with six wind turbine technologies rating between 1 and 3MW,the technical and economic assessment results reveal that the CN methods tend to overestimate the energy output and underestimate the cost of energy($/kWh)compared to the assessments by IOAs.The energy cost analyses show that Turaif is the windiest site,with an electricity cost of$0.016906/kWh.The highest wind energy output is obtained with the wind turbine having a rated power of 2.5 MW at all considered sites with electricity costs not exceeding$0.02739/kWh.Finally,the outcomes of this study exhibit the potential of wind energy in Saudi Arabia,and its environmental goals can be acquired by harvesting wind energy.
文摘In this paper, we present a new fruit fly optimization algorithm with the adaptive step for solving unconstrained optimization problems, which is able to avoid the slow convergence and the tendency to fall into local optimum of the standard fruit fly optimization algorithm. By using the information of the iteration number and the maximum iteration number, the proposed algorithm uses the floor function to ensure that the fruit fly swarms adopt the large step search during the olfactory search stage which improves the search speed;in the visual search stage, the small step is used to effectively avoid local optimum. Finally, using commonly used benchmark testing functions, the proposed algorithm is compared with the standard fruit fly optimization algorithm with some fixed steps. The simulation experiment results show that the proposed algorithm can quickly approach the optimal solution in the olfactory search stage and accurately search in the visual search stage, demonstrating more effective performance.
基金supported by the National Science and Technology Innovation 2030 Next-Generation Artifical Intelligence Major Project(2018AAA0101801)the National Natural Science Foundation of China(72271188)。
文摘With the development of information technology,a large number of product quality data in the entire manufacturing process is accumulated,but it is not explored and used effectively.The traditional product quality prediction models have many disadvantages,such as high complexity and low accuracy.To overcome the above problems,we propose an optimized data equalization method to pre-process dataset and design a simple but effective product quality prediction model:radial basis function model optimized by the firefly algorithm with Levy flight mechanism(RBFFALM).First,the new data equalization method is introduced to pre-process the dataset,which reduces the dimension of the data,removes redundant features,and improves the data distribution.Then the RBFFALFM is used to predict product quality.Comprehensive expe riments conducted on real-world product quality datasets validate that the new model RBFFALFM combining with the new data pre-processing method outperforms other previous me thods on predicting product quality.
基金Natural Science Foundation of Shandong Province,China(Grant No.ZR202111230202).
文摘Hyperspectral image classification stands as a pivotal task within the field of remote sensing,yet achieving highprecision classification remains a significant challenge.In response to this challenge,a Spectral Convolutional Neural Network model based on Adaptive Fick’s Law Algorithm(AFLA-SCNN)is proposed.The Adaptive Fick’s Law Algorithm(AFLA)constitutes a novel metaheuristic algorithm introduced herein,encompassing three new strategies:Adaptive weight factor,Gaussian mutation,and probability update policy.With adaptive weight factor,the algorithmcan adjust theweights according to the change in the number of iterations to improve the performance of the algorithm.Gaussianmutation helps the algorithm avoid falling into local optimal solutions and improves the searchability of the algorithm.The probability update strategy helps to improve the exploitability and adaptability of the algorithm.Within the AFLA-SCNN model,AFLA is employed to optimize two hyperparameters in the SCNN model,namely,“numEpochs”and“miniBatchSize”,to attain their optimal values.AFLA’s performance is initially validated across 28 functions in 10D,30D,and 50D for CEC2013 and 29 functions in 10D,30D,and 50D for CEC2017.Experimental results indicate AFLA’s marked performance superiority over nine other prominent optimization algorithms.Subsequently,the AFLA-SCNN model was compared with the Spectral Convolutional Neural Network model based on Fick’s Law Algorithm(FLA-SCNN),Spectral Convolutional Neural Network model based on Harris Hawks Optimization(HHO-SCNN),Spectral Convolutional Neural Network model based onDifferential Evolution(DE-SCNN),SpectralConvolutionalNeuralNetwork(SCNN)model,and SupportVector Machines(SVM)model using the Indian Pines dataset and PaviaUniversity dataset.The experimental results show that the AFLA-SCNN model outperforms other models in terms of Accuracy,Precision,Recall,and F1-score on Indian Pines and Pavia University.Among them,the Accuracy of the AFLA-SCNN model on Indian Pines reached 99.875%,and the Accuracy on PaviaUniversity reached 98.022%.In conclusion,our proposed AFLA-SCNN model is deemed to significantly enhance the precision of hyperspectral image classification.
基金supported via funding from Prince Sattam Bin Abdulaziz University Project Number(PSAU/2023/R/1445).
文摘This research proposes a highly effective soft computing paradigm for estimating the compressive strength(CS)of metakaolin-contained cemented materials.The proposed approach is a combination of an enhanced grey wolf optimizer(EGWO)and an extreme learning machine(ELM).EGWO is an augmented form of the classic grey wolf optimizer(GWO).Compared to standard GWO,EGWO has a better hunting mechanism and produces an optimal performance.The EGWO was used to optimize the ELM structure and a hybrid model,ELM-EGWO,was built.To train and validate the proposed ELM-EGWO model,a sum of 361 experimental results featuring five influencing factors was collected.Based on sensitivity analysis,three distinct cases of influencing parameters were considered to investigate the effect of influencing factors on predictive precision.Experimental consequences show that the constructed ELM-EGWO achieved the most accurate precision in both training(RMSE=0.0959)and testing(RMSE=0.0912)phases.The outcomes of the ELM-EGWO are significantly superior to those of deep neural networks(DNN),k-nearest neighbors(KNN),long short-term memory(LSTM),and other hybrid ELMs constructed with GWO,particle swarm optimization(PSO),harris hawks optimization(HHO),salp swarm algorithm(SSA),marine predators algorithm(MPA),and colony predation algorithm(CPA).The overall results demonstrate that the newly suggested ELM-EGWO has the potential to estimate the CS of metakaolin-contained cemented materials with a high degree of precision and robustness.
基金supported by the National Natural Science Foundation of China(60771063).
文摘To realize the requirement of diagnostic sequence optimization in the process of design for testability, the authors put forward an optimization method based on quantum-behaved particle swarm optimization (QPSO) algorithm. By a precedence ordering coding, the diagnostic sequence optimization can be translated into a precedence ordering problem in the multidimensional space of swarm. It can get the optimizing order quickly by using the powerful and quick search capability of QPSO algorithm, and the order is the diagnostic sequence for the system. The realization of the method is simpler than other methods, and the results are more excellent than others, and it has been applied in the engineering practice.
基金This project is supported by China 863 Hi-tech Program CIMS Topic (No.863-511-945-015).
文摘A concept of an intelligent optimal design approach is proposed, which isorganized by a kind of compound knowledge model. The compound knowledge consists of modularizedquantitative knowledge, inclusive experience knowledge and case-based sample knowledge. By usingthis compound knowledge model, the abundant quantity information of mathematical programming and thesymbolic knowledge of artificial intelligence can be united together in this model. The intelligentoptimal design model based on such a compound knowledge and the automatically generateddecomposition principles based on it are also presented. Practically, it is applied to theproduction planning, process schedule and optimization of production process of a refining &chemical work and a great profit is achieved. Specially, the methods and principles are adaptablenot only to continuous process industry, but also to discrete manufacturing one.
文摘Accurate stereo vision calibration is a preliminary step towards high-precision visual posi- tioning of robot. Combining with the characteristics of genetic algorithm (GA) and particle swarm optimization (PSO), a three-stage calibration method based on hybrid intelligent optimization is pro- posed for nonlinear camera models in this paper. The motivation is to improve the accuracy of the calibration process. In this approach, the stereo vision calibration is considered as an optimization problem that can be solved by the GA and PSO. The initial linear values can be obtained in the frost stage. Then in the second stage, two cameras' parameters are optimized separately. Finally, the in- tegrated optimized calibration of two models is obtained in the third stage. Direct linear transforma- tion (DLT), GA and PSO are individually used in three stages. It is shown that the results of every stage can correctly find near-optimal solution and it can be used to initialize the next stage. Simula- tion analysis and actual experimental results indicate that this calibration method works more accu- rate and robust in noisy environment compared with traditional calibration methods. The proposed method can fulfill the requirements of robot sophisticated visual operation.
文摘With the continuous improvement of radar intelligence, it is difficult for traditional countermeasures to achieve ideal results. In order to deal with complex, changeable, and unknown threat signals in the complex electromagnetic environment, a waveform intelligent optimization model based on intelligent optimization algorithm is proposed. By virtue of the universality and fast running speed of the intelligent optimization algorithm, the model can optimize the parameters used to synthesize the countermeasure waveform according to different external signals, so as to improve the countermeasure performance.Genetic algorithm(GA) and particle swarm optimization(PSO)are used to simulate the intelligent optimization of interruptedsampling and phase-modulation repeater waveform. The experimental results under different radar signal conditions show that the scheme is feasible. The performance comparison between the algorithms and some problems in the experimental results also provide a certain reference for the follow-up work.
基金sponsored by National Key Research and Development Program of China(No.2017YFB0304100)。
文摘In this study,related models of alloy purchasing decision system in the Baoshan base of Baosteel are discussed.First,the corresponding relationship between steel grades and alloy consumption is established through metallurgical-mechanism modeling and statistical analysis.Then,the alloy-demand prediction model based on alloy unit consumption and time series analysis is developed by combining sales plans and historical data.Finally,the alloy purchasing and inventory optimization model is developed to minimize the total cost of purchase and storage by combining inventory optimization theories.
文摘In the Acoustics channel,it is incredibly challenging to offer data transfer for time-sourced applications in an energy-efficient manner due to higher error rate and propagation delay.Subsequently,conventional re-transmission over any failure generally initiates significantly larger end-to-end delay,and therefore it is not probable for time-based services.Moreover,standard techniques without any re-transmission consume enormous energy.This investigation proposes a novel multi-hop energy-aware transmission-based intelligent water wave optimization strategy.It ensures reduced end-to-end while attaining potential amongst overall energy efficiency end-to-end packet delay.It merges a naturally inspired meta-heuristic approach with multi-hop routing for data packets to reach the destination.The appropriate design of this Meta heuristic-based energy-aware scheme consumes lesser energy than the conventional one-hop transmission strategy without re-transmission.However,there is no hop-by-hop re-transmission facilitated.The proposed model shows only lesser delay than conventional methods with re-transmission.This work facilitates extensive work to carry out the proposed model performance with the MATLAB simulation environment.The results illustrate that the model is exceptionally energyefficient with lesser packet delays.With 500 nodes,the packet delivery ratio of proposed model is 100%,average delay is reduced by 2%,total energy consumption is 8 J,average packet redundancy is 1.856,and idle energy is 6.9Mwh.The proposed model outperforms existing approaches like OSF,AOR,and DMR respectively.
文摘The grey wolf optimizer(GWO)is a swarm-based intelligence optimization algorithm by simulating the steps of searching,encircling,and attacking prey in the process of wolf hunting.Along with its advantages of simple principle and few parameters setting,GWO bears drawbacks such as low solution accuracy and slow convergence speed.A few recent advanced GWOs are proposed to try to overcome these disadvantages.However,they are either difficult to apply to large-scale problems due to high time complexity or easily lead to early convergence.To solve the abovementioned issues,a high-accuracy variable grey wolf optimizer(VGWO)with low time complexity is proposed in this study.VGWO first uses the symmetrical wolf strategy to generate an initial population of individuals to lay the foundation for the global seek of the algorithm,and then inspired by the simulated annealing algorithm and the differential evolution algorithm,a mutation operation for generating a new mutant individual is performed on three wolves which are randomly selected in the current wolf individuals while after each iteration.A vectorized Manhattan distance calculation method is specifically designed to evaluate the probability of selecting the mutant individual based on its status in the current wolf population for the purpose of dynamically balancing global search and fast convergence capability of VGWO.A series of experiments are conducted on 19 benchmark functions from CEC2014 and CEC2020 and three real-world engineering cases.For 19 benchmark functions,VGWO’s optimization results place first in 80%of comparisons to the state-of-art GWOs and the CEC2020 competition winner.A further evaluation based on the Friedman test,VGWO also outperforms all other algorithms statistically in terms of robustness with a better average ranking value.
文摘A two-layer implicit difference scheme is employed in the present study to determine the temperature distribution in an asphalt pavement.The calculation of each layer only needs four iterations to achieve convergence.Furthermore,in order to improve the calculation accuracy a swarm intelligence optimization algorithm is also exploited to inversely analyze the laws by which the thermal physical parameters of the asphalt pavement materials change with temperature.Using the basic cuckoo and the gray wolf algorithms,an adaptive hybrid optimization algorithm is obtained and used to determine the relationship between the thermal diffusivity of two types of asphalt pavement materials and the temperature.As shown by the results,the prediction accuracy achievable with this approach is higher than that of the linear model.
基金co-supported by the Science Center for Gas Turbine Project, China (No. P2022-B-Ⅱ-025-001)the National Science and Technology Major Project, China (No. Y2019-Ⅰ-0018-0017)。
文摘A new thermal protection design method for hypersonic vehicle's leading edge is proposed, which can effectively reduce temperature of the leading edge without additional cooling measures. This method reduces the leading-edge's temperature by the multi-scale collaborative design of the macroscopic thermal optimization and the mesoscopic woven structures of Three-dimensional Orthogonal Woven Ceramic Matrix Composites(TOCMC). The macroscopic thermal optimization is achieved by designing different mesoscopic woven structures in different regions to create combined heat transfer channels to dredge the heat. The combined heat transfer channel is macroscopically represented by the anisotropic thermal conductivity of TOCMC. The thermal optimization multiple linear regression model is established to optimize the heat transport channel, which predicts Theoretical Optimal Thermal Conductivity Configuration(TOTCC) in different regions to achieve the lowest leading-edge temperature. The function-oriented mesostructure design method is invented to design the corresponding mesostructure of TOCMC according to the TOTCC, which consists of universal thermal conductivity prediction formulas for TOCMC. These universal formulas are firstly derived based on the thermal resistance network method, which is verified by experiments with an error of 6.25%. The results show that the collaborative design method can effectively reduce the leading edge temperature by about 12.8% without adding cooling measures.
基金supported in part by the National Natural Science Foundation of China(61802015,61703011)the Major Science and Technology Program for Water Pollution Control and Treatment of China(2018ZX07111005)+1 种基金the National Defense Pre-Research Foundation of China(41401020401,41401050102)the Deanship of Scientific Research(DSR)at King Abdulaziz University,Jeddah(D-422-135-1441)。
文摘An increasing number of enterprises have adopted cloud computing to manage their important business applications in distributed green cloud(DGC)systems for low response time and high cost-effectiveness in recent years.Task scheduling and resource allocation in DGCs have gained more attention in both academia and industry as they are costly to manage because of high energy consumption.Many factors in DGCs,e.g.,prices of power grid,and the amount of green energy express strong spatial variations.The dramatic increase of arriving tasks brings a big challenge to minimize the energy cost of a DGC provider in a market where above factors all possess spatial variations.This work adopts a G/G/1 queuing system to analyze the performance of servers in DGCs.Based on it,a single-objective constrained optimization problem is formulated and solved by a proposed simulated-annealing-based bees algorithm(SBA)to find SBA can minimize the energy cost of a DGC provider by optimally allocating tasks of heterogeneous applications among multiple DGCs,and specifying the running speed of each server and the number of powered-on servers in each GC while strictly meeting response time limits of tasks of all applications.Realistic databased experimental results prove that SBA achieves lower energy cost than several benchmark scheduling methods do.