Optimization of the Internal Circulating Fluidized Bed Using Computational Fluid Dynamics Technology

The computational fluid dynamics(CFD)technology is analyzed and calculated utilizing the turbulence model and multiphase flow model to explore the performance of internal circulating fluidized beds(ICFB)based on CFD.The three-dimensional simulation method can study the hydrodynamic properties of the ICFB,and the performance of the fluidized bed is optimized.The fluidization performance of the ICFB is improved through the experimental study of the cross-shaped baffle.Then,through the cross-shaped baffle and funnel-shaped baffle placement,the fluidized bed reaches a coupled optimization.The results show that CFD simulation technology can effectively improve the mass transfer efficiency and performance of sewage treatment.The base gap crossshaped baffle can improve the hydraulic conditions of the fluidized bed and reduce the system energy consumption.The cross-shaped baffle and funnel-shaped baffle can perfect the performance of the reactor and effectively strengthen the treatment in the intense aerobic process of industrial sewage.

Hydrodynamics in commercial-scale internally circulating fluidized beds with different central downcomer outlets

Standpipes,or downcomers,are commonly used in fluidized beds to transport particles.The outlet structure of the downcomer greatly affects the performance of flow from it and even overall reactor performance.In this study,the hydrodynamics in commercial-scale internally circulating fluidized beds(ICFBs)with central downcomers having different outlet structures was investigated using computational fluid dynamics simulations with an energy minimization multi-scale drag model.The predicted results closely agreed with experimental data.Results showed that in an ICFB with a downcomer outlet directly open to the bed(model A),nearly 12.7%to 5.4%of the gas in the draft tube bypasses into the downcomer.In the ICFB models B and C with a conic baffle below the downcomer,the gas bypass is significantly weakened or even eliminated when the diameter of the conic baffle is 1.1 times that of the downcomer(model C).In addition,the solids circulation mass flux in ICFBs increased by about 62.5%,from 126.8 kg/(m2 s)in model A to 206 kg/(m2 s)in model C.

Hydrodynamic behavior of an internally circulating fluidized bed with tubular gas distributors

To better understand the hydrodynamic behavior of an internally circulating fluidized bed, solids holdup in the down-comer （Eso）, solids circulation rate （Gs） and gas bypassing fraction （from down-comer to riser y^R, and from riser to down-comer yRD） were experimentally studied. The effects of gas velocities in the riser and in the down-comer （UR and UD）, orifice diameter in the draft tube （dor）, and draft tube height （HR） were investigated. Experimental results showed that increase of gas velocities led to increase in Gs and yDR, and slight decrease in yeD. Larger orifice diameter on the draft tube led to higher 8sD, Gs and yDR, but had insignificant influence on YRD. with increasing draft tube height, both Gs and YDR first increased and then decreased, while yRD first decreased and then increased. Proposed correlations for predicting the hydrodynamic parameters agreed reasonably well with experimental values.