A Wireframe Model-Based Method for Automated Internal Design

This paper proposes a wireframe model-based method for automated internal design. The method is used to extract geometric structure of an internal wireframe model and find out all loop structures of furniture models. The wireframe models are classified as the multiple independent sub-models according to the geometric structure by statistical analysis. The corresponding models are selected from a 3D model database to build an internal scene based on characteristic points of furniture wireframe models. In the experiments 3D database via manually selected 268 3D furniture models from Google 3D warehouse is built up. The experiments show that the method can construct 3D scenes in 1.1×103 ms. This method costs less time compared with traditional hierarchical method and depth-sensing camera method in the same experimental conditions. The method can be also used for 3D visualization either with complex backgrounds.

The 4th Brother Cup China International Garment Youth Designers Competition

On April 13,1996,the 4th Brother CupChina International Garment YouthDesigners Competition was held inBeijing.The final competition was attendedby 36 young designers from 18 countries andregions,including the UK,France,Japan,Germany,Italy,Spain,Canada,Finland,India,the US,Russia,Singapore,Malaysia,Honduras,Niger and Hongkong.

Interpreting the dynamic effect of internal heat integration on reactive distillation columns

In this work,the impact of internal heat integration upon process dynamics and controllability by superposing reactive section onto stripping section,relocating feed locations,and redistributing catalyst within the reactive section is explored based on a hypothetical ideal reactive distillation system containing an exothermic reaction:A + BC + D.Steady state operation analysis and closed-loop controllability evaluation are carried out by comparing the process designs with and without the consideration of internal heat integration.For superposing reactive section onto stripping section,favorable effect is aroused due to its low sensitivities to the changes in operating condition.For ascending the lower feed stage,somewhat detrimental effect occurs because of the accompanied adverse internal heat integration and strong sensitivity to the changes in operating condition.For descending the upper feed stage,serious detrimental effect happens because of the introduced adverse internal heat integration and strong sensitivity to the changes in operating condition.For redistributing catalyst in the reactive section,fairly small negative influence is aroused by the sensitivity to the changes in operating condition.When reinforcing internal heat integration with a combinatorial use of these three strategies,the decent of the upper feed stage should be avoided in process development.Although the conclusions are derived based on the hypothetical ideal reactive distillation column studied,they are considered to be of general significance to the design and operation of other reactive distillation columns.

Call For Paper 5th International Maritime Conference on DESIGN FOR SAFETY and 4th Workshop on RISK-BASED APPROACHES IN THE MARINE INDUSTRIES

In 1999, the first International Maritime Confere- nce on Design for Safety was successfully held in Glasgow, UK as a WEGEMT Euro Conference with the sponsorship of the European Commission. Respo- nding to the expectation from the world maritime safety community, the second was held in 2004 in Japan. The third and fourth were held in USA, 2007 and Italy, 2010, respectively. This year the Design for Safety conference including a single event of the 4th Workshop on Risk-Based Approaches in the Marine Industries will be held in Shanghai on November 25- 27, 2013. The conference is organized by Shanghai Jiao Tong University and is co-organized/sponsored by Marine Design and Research Institute of China （MARIC） and China Classification Society （CCS~.