The Japanese government’s unilateral decision to discharge the nuclear-contaminated water from the Fukushima nuclear power plant into the ocean has caused immense nuclear safety risks.Monitoring the unclear contamina...The Japanese government’s unilateral decision to discharge the nuclear-contaminated water from the Fukushima nuclear power plant into the ocean has caused immense nuclear safety risks.Monitoring the unclear contaminated water is a starting point to combat these risks and seek remedies for the rights and interests of all concerned parties.The establishment of a mechanism for international cooperation in this respect is necessary to handle the risks of the Fukushima nuclear-contaminated water and to lay the foundation of a framework for tackling any future disposal of nuclear-contaminated water following Japan’s example.At present,the international legal systems in the spheres of nuclear safety and security,marine environmental protection,and other areas,as well as the questioning of the monitoring reports of the International Atomic Energy Agency(IAEA)by the relevant parties,the monitoring practices of historical nuclear accidents,and numerous radioactivity monitoring mechanisms have provided the institutional and practical basis for constructing such a mechanism.The mechanism can be promoted by the IAEA through its existing mechanisms or be jointly initiated by China,the Russian Federation,the Republic of Korea,the Democratic People’s Republic of Korea,and the Pacific Island countries,among other stakeholders.Specifically,this mechanism should consist of three levels:first,the framework of the basic legal system,including the cooperative principles of national sovereignty,interest-relatedness,and procedural fairness,and the signing of the Framework Convention on the Monitoring of Fukushima’s nuclear-contaminated water and its Optional Protocol;second,the organizational structure and its responsibilities,which may include the Conference of Parties as the decision-making body,the Secretariat as the central coordinating body,and the monitoring committees in various fields as specific implementing agencies;and third,specific administrative arrangements,which involve the standardization of monitoring,the management system of monitoring networks and stations,the rules for monitoring procedures,and the rules for the utilization of the monitoring data,etc.With the urgent need for the scientific and fair monitoring of Fukushima’s nuclear-contaminated water,China,as a stakeholder country,can promote the establishment of such a mechanism for monitoring nuclear-contaminated water through the following paths:①It is necessary to clarify the factors affecting the construction of an international cooperation mechanism for monitoring nuclear-contaminated water so as to ascertain the standpoints of the stakeholders,claims of their interests,contents of their cooperation,and the relevant international relations.②On the basis of existing practices,China should consider improving the monitoring mechanism to cope with the risks of the discharge of Fukushima’s nuclear-contaminated water by formulating targeted policies and systems,setting up specialized monitoring institutions,and establishing a systematic monitoring network system.③This is an effective way for China to actively promote the participation of stakeholders in the construction of an international cooperation mechanism for monitoring nuclear-contaminated water in Fukushima by further innovating the dissemination mechanism to address the risk of Fukushima’s nuclear-contaminated water discharging into the sea and facilitating the identification of issues for international cooperation in monitoring Fukushima’s nuclear-contaminated water based on the concept of a community with a shared future for mankind.展开更多
From the scope and technical system perspective, this paper sums up the history and current situation of logistics tracking and monitoring standards under international standards and national standards system. Taking ...From the scope and technical system perspective, this paper sums up the history and current situation of logistics tracking and monitoring standards under international standards and national standards system. Taking the first international standard developed by China in the field of logistics and Internet of Things as an example, it analyzes the status quo and trend of monitoring in logistics, presenting valuable experience for standards development in logistics tracking and monitoring in China.展开更多
The basic difference non-equal interval model GM(1,1) in grey theory was used to fit and forecast data series with non-equal lengths and different inertias, acquired from oil monitoring of internal combustion engines....The basic difference non-equal interval model GM(1,1) in grey theory was used to fit and forecast data series with non-equal lengths and different inertias, acquired from oil monitoring of internal combustion engines. The fitted and forecasted results show that the length or inertia of a sequence affects its precision very much, i.e. the bigger the inertia of a sequence is, or the shorter the length of a series is, the less the errors of fitted and forecasted results are. Based on the research results, it is suggested that short series should be applied to be fitted and forecasted; for longer series, the newer datum should be applied instead of the older datum to be analyzed by non- equalinterval GM(1,1) to improve the forecasted and fitted precision, and that data sequence should be verified to satisfy the conditions of grey forecasting.展开更多
Based on the Chinese Meridian Project(CMP),the International Meridian Circle Program(IMCP)aims to coordinate the deployment of a comprehensive ground-based monitoring network along the 120°E-60°W Great Merid...Based on the Chinese Meridian Project(CMP),the International Meridian Circle Program(IMCP)aims to coordinate the deployment of a comprehensive ground-based monitoring network along the 120°E-60°W Great Meridian Circle to track the propagation and evolution of space weather events from the Sun to the Earth,as well as the imprints of other major natural and anthropic hazards on the ionosphere,the middle and upper atmosphere.Currently,we have completed the IMCP headquarters building in Beijing and established the China-Brazil Joint Laboratory for Space Weather in cooperation with Brazil.Meanwhile,the Chinese Meridian Project PhaseⅡand different components of the IMCP observation system are under construction.展开更多
Injection molding is a complicated production technique for the manufacturing of polymer products. During injection molding, it＇s hard to predict molding quality; the injection molding parameters, such as mold temper...Injection molding is a complicated production technique for the manufacturing of polymer products. During injection molding, it＇s hard to predict molding quality; the injection molding parameters, such as mold temperature, melt temperature, packing pressure and packing time, affect the final properties of product. The cavity pressure is a significant key factor. Residual stress and injection molding weight are significantly affected by the cavity pressure. This study created an approach to predict weight of injection-molded by real-time online cavity pressure monitoring. This study uses a 6-inch with thickness lmm light guide panel and the largest area beneath the pressure curve of time as well as the maximum pressure as its characteristic. The upper and lower limits of the control are set to ＋2 standard deviations, and GUI （Graphical User Interface）-based LabVIEW software is used to perform calculation and analysis of the pressure curve. The results of the experiment show that the online internal cavity pressure monitoring system can effectively monitor the quality of the molded products. In 500 injection molding cycle tests, its error rate was less than 8%, whereas the deviation in mass of the molded products selected through the system＇s filtering process was successfully controlled to be within ±4%.展开更多
基金funded by the National Social Science Fund of China[Grant No.20&ZD162].
文摘The Japanese government’s unilateral decision to discharge the nuclear-contaminated water from the Fukushima nuclear power plant into the ocean has caused immense nuclear safety risks.Monitoring the unclear contaminated water is a starting point to combat these risks and seek remedies for the rights and interests of all concerned parties.The establishment of a mechanism for international cooperation in this respect is necessary to handle the risks of the Fukushima nuclear-contaminated water and to lay the foundation of a framework for tackling any future disposal of nuclear-contaminated water following Japan’s example.At present,the international legal systems in the spheres of nuclear safety and security,marine environmental protection,and other areas,as well as the questioning of the monitoring reports of the International Atomic Energy Agency(IAEA)by the relevant parties,the monitoring practices of historical nuclear accidents,and numerous radioactivity monitoring mechanisms have provided the institutional and practical basis for constructing such a mechanism.The mechanism can be promoted by the IAEA through its existing mechanisms or be jointly initiated by China,the Russian Federation,the Republic of Korea,the Democratic People’s Republic of Korea,and the Pacific Island countries,among other stakeholders.Specifically,this mechanism should consist of three levels:first,the framework of the basic legal system,including the cooperative principles of national sovereignty,interest-relatedness,and procedural fairness,and the signing of the Framework Convention on the Monitoring of Fukushima’s nuclear-contaminated water and its Optional Protocol;second,the organizational structure and its responsibilities,which may include the Conference of Parties as the decision-making body,the Secretariat as the central coordinating body,and the monitoring committees in various fields as specific implementing agencies;and third,specific administrative arrangements,which involve the standardization of monitoring,the management system of monitoring networks and stations,the rules for monitoring procedures,and the rules for the utilization of the monitoring data,etc.With the urgent need for the scientific and fair monitoring of Fukushima’s nuclear-contaminated water,China,as a stakeholder country,can promote the establishment of such a mechanism for monitoring nuclear-contaminated water through the following paths:①It is necessary to clarify the factors affecting the construction of an international cooperation mechanism for monitoring nuclear-contaminated water so as to ascertain the standpoints of the stakeholders,claims of their interests,contents of their cooperation,and the relevant international relations.②On the basis of existing practices,China should consider improving the monitoring mechanism to cope with the risks of the discharge of Fukushima’s nuclear-contaminated water by formulating targeted policies and systems,setting up specialized monitoring institutions,and establishing a systematic monitoring network system.③This is an effective way for China to actively promote the participation of stakeholders in the construction of an international cooperation mechanism for monitoring nuclear-contaminated water in Fukushima by further innovating the dissemination mechanism to address the risk of Fukushima’s nuclear-contaminated water discharging into the sea and facilitating the identification of issues for international cooperation in monitoring Fukushima’s nuclear-contaminated water based on the concept of a community with a shared future for mankind.
文摘From the scope and technical system perspective, this paper sums up the history and current situation of logistics tracking and monitoring standards under international standards and national standards system. Taking the first international standard developed by China in the field of logistics and Internet of Things as an example, it analyzes the status quo and trend of monitoring in logistics, presenting valuable experience for standards development in logistics tracking and monitoring in China.
文摘The basic difference non-equal interval model GM(1,1) in grey theory was used to fit and forecast data series with non-equal lengths and different inertias, acquired from oil monitoring of internal combustion engines. The fitted and forecasted results show that the length or inertia of a sequence affects its precision very much, i.e. the bigger the inertia of a sequence is, or the shorter the length of a series is, the less the errors of fitted and forecasted results are. Based on the research results, it is suggested that short series should be applied to be fitted and forecasted; for longer series, the newer datum should be applied instead of the older datum to be analyzed by non- equalinterval GM(1,1) to improve the forecasted and fitted precision, and that data sequence should be verified to satisfy the conditions of grey forecasting.
基金Supported by the International Partnership Program of Chinese Academy of Sciences(183311KYSB20200003)。
文摘Based on the Chinese Meridian Project(CMP),the International Meridian Circle Program(IMCP)aims to coordinate the deployment of a comprehensive ground-based monitoring network along the 120°E-60°W Great Meridian Circle to track the propagation and evolution of space weather events from the Sun to the Earth,as well as the imprints of other major natural and anthropic hazards on the ionosphere,the middle and upper atmosphere.Currently,we have completed the IMCP headquarters building in Beijing and established the China-Brazil Joint Laboratory for Space Weather in cooperation with Brazil.Meanwhile,the Chinese Meridian Project PhaseⅡand different components of the IMCP observation system are under construction.
文摘Injection molding is a complicated production technique for the manufacturing of polymer products. During injection molding, it＇s hard to predict molding quality; the injection molding parameters, such as mold temperature, melt temperature, packing pressure and packing time, affect the final properties of product. The cavity pressure is a significant key factor. Residual stress and injection molding weight are significantly affected by the cavity pressure. This study created an approach to predict weight of injection-molded by real-time online cavity pressure monitoring. This study uses a 6-inch with thickness lmm light guide panel and the largest area beneath the pressure curve of time as well as the maximum pressure as its characteristic. The upper and lower limits of the control are set to ＋2 standard deviations, and GUI （Graphical User Interface）-based LabVIEW software is used to perform calculation and analysis of the pressure curve. The results of the experiment show that the online internal cavity pressure monitoring system can effectively monitor the quality of the molded products. In 500 injection molding cycle tests, its error rate was less than 8%, whereas the deviation in mass of the molded products selected through the system＇s filtering process was successfully controlled to be within ±4%.
