Multiple-target tracking with adaptive sampling intervals for phased-array radar

A novel adaptive sampling interval algorithm for multitarget tracking is presented. This algorithm which is based on interacting multiple models incorporates the grey relational grade （GRG） into the particle swarm optimization （PSO）. Firstly, the desired tracking accuracy is set for each target. Secondly, sampling intervals are selected as particles, and then the advantage of the GRG is taken as the measurement function for resource management. Meanwhile, the fitness value of the PSO is used to measure the difference between desired tracking accuracy and estimated tracking accuracy. Finally, it is suggested that the radar should track the target whose prediction value of the next sampling interval is the smallest. Simulations show that the proposed method improves both the tracking accuracy and tracking efficiency of the phased-array radar.

Joint optimization of sampling interval and control for condition-based maintenance using availability maximization criterion

Most of the maintenance optimization models in condition-based maintenance(CBM) consider the cost-optimal criterion, but few papers have dealt with availability maximization for maintenance applications. A novel optimal Bayesian control approach is presented for maintenance decision making. The system deterioration evolves as a three-state continuous time hidden semi-Markov process. Considering the optimal maintenance policy, the multivariate Bayesian control scheme based on the hidden semi-Markov model(HSMM) is developed, the objective is to maximize the long-run expected average availability per unit time. The proposed approach can optimize the sampling interval and control limit jointly. A case study using Markov chain Monte Carlo(MCMC)simulation is provided and a comparison with the Bayesian control scheme based on hidden Markov model(HMM), the age-based replacement policy, Hotelling’s T2, multivariate exponentially weihted moving average(MEWMA) and multivariate cumulative sum(MCUSUM) control charts is given, which illustrates the effectiveness of the proposed method.

Impact of sampling interval on variance components of epoch-wise residual error in relative GPS positioning: A case study of a 40-km-long baseline

The study presents sampling interval impacts on variance components of the epoch-wise residual errors in relative GPS positioning. In the variance components estimation process, the 2-way nested ANOVA method was used. For that purpose, GPS observation data during four months at two permanent GPS stations, establishing a 40-km-long baseline as a part of the Montenegrin permanent network(Monte Pos), were used. The study results showed that there is no statistically significant impact of sampling interval changes on epoch-wise variance components related to the residual tropospheric and ionospheric delays(effect a) when it comes to such a baseline. However, it is not the case with epoch-wise variance components related to the interstation-distance-independent residual ‘far-field’ multipath effect(effect b). It turned out that the absolute values of relative differences of standard deviations of the effect a on the relative GPS coordinates(e, n and u) had maximum values 11.1%, 10.2% and 8.9%,respectively. Keeping the same order of presentation for the effect b, the values of 5.9%, 9.9% and 12.5%were obtained. In addition, absolute values of relative differences of standard deviations of horizontal and vertical position had maximum values of 3.8% and 7.7%, respectively.

An On-Line Modeling Based Kalman Filtering Process for Time-Interval-Variable Sequences with Application to Astronomic Surveying

The problem of variable sampling time interval which appears in application of Kalman Filtering is analyzed and the corresponding filtering process with or without present transition matrix is suggested, then an application experiment for astronomical surveying is introduced. In this process, the known stochastically variable sampling time intervals play the roles as deterministic input sequences of the state-space description, and the corresponding matrix and (if needed) state transition matrix can be established by performing real-time and structure-linear system identification.

Probability estimation based on grey system theory for simulation evaluation

In the evaluation of some simulation systems, only small samples data are gotten due to the limited conditions. In allusion to the evaluation problem of small sample data, an interval estimation approach with the improved grey confidence degree is proposed.On the basis of the definition of grey distance, three kinds of definition of the grey weight for every sample element in grey estimated value are put forward, and then the improved grey confidence degree is designed. In accordance with the new concept, the grey interval estimation for small sample data is deduced. Furthermore,the bootstrap method is applied for more accurate grey confidence interval. Through resampling of the bootstrap, numerous small samples with the corresponding confidence intervals can be obtained. Then the final confidence interval is calculated from the union of these grey confidence intervals. In the end, the simulation system evaluation using the proposed method is conducted. The simulation results show that the reasonable confidence interval is acquired, which demonstrates the feasibility and effectiveness of the proposed method.

Distributed model predictive control based on adaptive sampling mechanism

In this work,an adaptive sampling control strategy for distributed predictive control is proposed.According to the proposed method,the sampling rate of each subsystem of the accused object is determined based on the periodic detection of its dynamic behavior and calculations made using a correlation function.Then,the optimal sampling interval within the period is obtained and sent to the corresponding sub-prediction controller,and the sampling interval of the controller is changed accordingly before the next sampling period begins.In the next control period,the adaptive sampling mechanism recalculates the sampling rate of each subsystem’s measurable output variable according to both the abovementioned method and the change in the dynamic behavior of the entire system,and this process is repeated.Such an adaptive sampling interval selection based on an autocorrelation function that measures dynamic behavior can dynamically optimize the selection of sampling rate according to the real-time change in the dynamic behavior of the controlled object.It can also accurately capture dynamic changes,meaning that each sub-prediction controller can more accurately calculate the optimal control quantity at the next moment,significantly improving the performance of distributed model predictive control(DMPC).A comparison demonstrates that the proposed adaptive sampling DMPC algorithm has better tracking performance than the traditional DMPC algorithm.

Signal difference-based deadband H_∞ control approach for networked control systems with limited resources

This paper investigates a signal difference-based dead- band H∞ control approach for networked control systems （NCSs） with limited resources. The effects of variable network-induced de- lays, sampling intervals and data transmitting deadbands are con- sidered simultaneously and the model of the NCS is presented. A Lyapunov functional is adopted, which makes full use of the network characteristic information including the bounds of net- work delay （BND）, the bounds of sampling interval （BSI） and the bounds of transmission deadband （BTD）. In the meanwhile, the new H∞ performance analysis and controller design conditions for the NCSs are proposed, which describe the relationship of BND, BSI, BTD and the system＇s performance. Three examples are used to illustrate the advantages of the proposed methods. The results have shown that the proposed method not only effectively reduces the data traffic, but also guarantees the system asymptotically sta- ble and achieves the prescribed H∞ disturbance attenuation level.

On limit cycle chattering in sliding mode control systems under the influence of sampling intervals based on describing function approach

In this paper, the influence of sampling intervals on the chattering in sliding mode （SM） control systems is considered. The describing function （DF） approach is employed to analyze the chattering characteristics in the sampling SM control. By the DF calculations and limit cycle existence conditions, an unstable limit cycle and two stable limit cycles are found in the SM control system. The frequencies and amplitudes of the two limit cycles can also be estimated by graphical calculations. The estimation accuracy of chattering parameters is evaluated by the simulations. The results of simulations show that the system could converge to a large and a small limit cycle from different initial conditions.

Relationship between sampling intensity and precision for estimating damage to maize caused by rodents

In this study we aimed to determine the relationship between sampling intensity and precision for estimating rodentdamage. We used the systematic row sampling technique to provide data to achieve precision and accuracy inestimations of rodent damage in maize fields at the planting and seedling stages. The actual rodent damage to maizein 15 fields, each 0.5 ha in size, in Morogoro, Tanzania, was established at the seedling stage. These data were usedto simulate the sampling intensities that would provide precision and accuracy. The variations between estimateswere plotted against the sampling intervals. The results of this study show that the relationship between averagestandardized variances and sampling intervals is linear. The heterogeneous distribution of damage in some plotscaused variations in the accuracy of the estimates between plots, but a sampling interval of five rows consistentlyproduced estimates with a variance of less than 10%. We provide a standard curve that will allow a decision to bemade on the sampling intensity as a function of required precision using the systematic row sampling technique inmaize fields.