Intra-continental Orogeny:Insights from Magnetotelluric Data into the Mesozoic Uplift History of the Eastern Jiangnan Orogen in South China

Despite extensive efforts to understand the tectonic evolution of the Jiangnan Orogen in South China,the orogenic process and its mechanism remain a matter of dispute.Previous geodynamic studies have mostly focused on collisional orogeny,which is commonly invoked to explain the Jiangnan Orogen.However,it is difficult for such hypotheses to reconcile all the geological and geophysical data,especially the absence of ultrahigh-pressure metamorphic rocks.Based on the magnetotelluric data,we present a group of resistivity models produced through the combination of two-dimensional and three-dimensional inversions,revealing the geo-electrical structures of Jiangnan and a typical collisional orogen.In our models,the resistive crust is separated into three parts by a prominent conductive layer with opposite dipping directions on both sides.A special thrust-nappe system,which is different from that developed in a typical collisional process,is revealed in the Jiangnan Orogen.This structure suggests a process different from the simple collisional orogeny.To interpret our observations,an'intra-continental orogeny'is proposed to address the development of the Jiangnan Orogen in the Mesozoic.Furthermore,this'reworked'process may contain at least two stages caused by the decoupling of the lithosphere,which is revealed by an extra conductive layer beneath Jiangnan.

Intra-continental back-arc basin inversion and Late Carboniferous magmatism in Eastern Tianshan,NW China:Constraints from the Shaquanzi magmatic suite

The Yamansu belt,an important tectonic component of Eastern Tianshan Mountains,of the Central Asian Orogenic Belt,NW China hosts many Fe-(Cu)deposit.In this study,we present new zircon U-Pb geochronology and geochemical data of the volcanic rocks of Shaquanzi Formation and diorite intrusions in the Yamansu belt.The Shaquanzi Formation comprises mainly basalt,andesite/andesitic tuff,rhyolite and sub-volcanic diabase with local diorite intrusions.The volcanic rocks and diorites contain ca.315-305 Ma and ca.298 Ma zircons respectively.These rocks show calc-alkaline affinity with enrichment in large-ion lithophile elements(LILEs),light rare-earth elements(LREEs),and depletion in high field strength elements(HFSEs)in primitive mantle normalized multi-element diagrams,which resemble typical back-arc basin rocks.They show depleted mantle signature with ε_(Nd)(t)ranging from+3.1 to +5.6 for basalt;+2.1 to+4.7 for andesite;-0.2 to+1.5 for rhyolite and the ε_(Hf)(t)ranges from-0.1 to +13.0 for andesites;+5.8 to +10.7 for andesitic tuffs.We suggest that the Shaquanzi Formation basalt might have originated from a depleted,metasomatized lithospheric mantle source mixed with minor(3-5%)subduction-derived materials,whereas the andesite and rhyolite could be fractional crystallization products of the basaltic magma.The Shaquanzi Formation volcanic rocks could have formed in an intracontinental back-arc basin setting,probably via the southward subduction of the Kangguer Ocean beneath the Middle Tianshan Massif.The Yamansu mineralization belt might have undergone a continental arc to back-arc basin transition during the Late Carboniferous and the intra-continental back-arc basin might have closed in the Early Permian,marked by the emplacement of dioritic magma in the Shaquanzi belt.

Petrogenesis of the～2115 Ma Haicheng Mafic Sills in the Eastern North China Craton and Their Implications for An Intra-Continental Rifting

It is well known that there are widespread igneous events at;100 Ma in the Eastern North China Craton;however,their tectonic environments are controversial.They were thought to be either related to an intra-continental rifting or

Structural Geology and Chronology of Shear Zones along the Shangdan Suture in Qinling Orogenic Belt,China:Implications for Late Mesozoic Intra-Continental Deformation of East Asia

The Shangdan suture zone(SDZ)in the Qinling orogenic belt(QOB)is a key to understanding the East Asia tectonic evolution.The SDZ gives information about convergent processes between the North China Block(NCB)and South China Block(SCB).In the Late Mesozoic,several shear zones evolved along the SDZ boundary that helps us comprehend the collisional deformation between the NCB and SCB,which was neglected in previous studies.These shear zones play an essential role in the tectonic evolution of the East Asia continents.This study focuses on the deformation and geochronology of two shear zones distributed along the SDZ,identified in the Shaliangzi and Maanqiao areas.The shear sense indicators and kinematic vorticity numbers(0.54–0.90)suggest these shear zones have sinistral shear and sub-simple shear deformation kinematics.The quartz’s dynamic recrystallization and c-axis fabric analysis in the Maanqiao shear zone(MSZ)revealed that the MSZ experienced deformation under green-schist facies conditions at∼400–500℃.The Shaliangzi shear zone deformed under amphibolite facies at∼500–700℃.The^(40)Ar/^(39)Ar(muscovite-biotite)dating of samples provided a plateau age of 121–123 Ma.Together with previously published data,our results concluded that QOB was dominated by compressional tectonics during the Late Early Cretaceous.Moreover,we suggested that the Siberian Block moved back to the south and Lhasa-Qiantang-Indochina Block to the north,which promoted intra-continental compressional tectonics.

Tectonic evolution of the Dabashan orocline, central China: Insights from the superposed folds in the eastern Dabashan foreland

The Dabashan orocline is situated in the northwestern margin of the central Yangtze block,central China.Previous studies have defined the orthogonal superposed folds growing in its central-western segment thereby confirming its two-stage tectonic evolution history.Geological mapping has revealed that more types of superposed folds have developed in the eastern segment of the orocline,which probably provides more clues for probing the structure and tectonic history of the Dabashan orocline.In this paper,based on geological mapping,structural measurements and analyses of deformation,we have identified three groups of folds with different trends （e.g.NW-,NE-and nearly E-trending folds） and three types of structural patterns of superposed folds in the eastern Dabashan foreland （e.g.syn-axial,oblique,and conjunctional superposed folds）.In combination with geochronological data,we propose that the synaxial superposed folds are due to two stages of ～N-S shortening in the west and north of the Shennongjia massif,and that oblique superposed folds have been resulted from the superposition of the NW-and NE-trending folds onto the early ～ E-W folds in the east of the Shennongjia massif in the late Jurassic to early Cretaceous.The conjunctional folds are composed of the NW-and NE-trending folds,corresponding to the regional-scale dual-orocline in the eastern Sichuan as a result of the southwestward expansion of the Dabashan foreland during late Jurassic to early Cretaceous,coeval with the northwestward propagation of the Xuefengshan foreland.Integration of the structure and geochronology of the belt shows that the Dabashan orocline is a combined deformation belt primarily experiencing a twostage tectonic evolution history in Mesozoic,initiation of the Dabashan orocline as a foreland basin along the front of the Qinling orogen in late Triassic to early Jurassic due to collisional orogeny,and the final formation of the Dabashan orocline owing to the southwestward propagation of the Qinling orogen during late Jurassic to early Cretaceous intra-continental orogeny.Our studies provide some evidences for understanding the structure and deformation of the Dabashan orocline.

Yangshan Gold Deposit:The Largest Carlin and Carlin-like Type Gold Deposit in China

Gold Headquarter of the CAPF has discovered the Yangshan super large-scale gold deposit in Gansu Province, which is a great breakthrough of gold exploration and prospecting in Western Qinling Mountains of China. The gold resources of this deposit achieved 308 tons with increasing potentials. Preliminary geological investigations indicate that the Yangshan gold deposit is located in the intra-continental collision orogenic belt; and the deposit was formed during the continent-continent collision orogenic processes. The geological characteristics of the deposit are similar to that of the typical Carlin-type gold deposits, while differences still exist. The ore-forming background is notably different from the Carlin gold deposit province in the United States; and the ore-forming fluids are similar with that of the orogenic-type gold deposit. Accordingly, the Yangshan gold deposit is a transitional type between the Carlin-type and the orogenic type gold deposits. At present, the Yangshan gold deposit is the largest Carlin and Carlin-like type gold deposit that is ever discovered in China. Researches on metallogeny, metallogenic model and ore-enrichment regularities of the Yangshan gold deposit are crucial to meet the pressing needs of the current geological investigation and ore exploration of the deposit.

Early Indosinian Weiya Gabbro in Eastern Tianshan, China: Elemental and Sr-Nd-O Isotopic Geochemistry, and Its Tectonic Implications

The Weiya gabbro in eastern Tianshan was formed during the early Indosinian. This rock, with low ratios of Ce/Pb （5.74-10.16）, is notably characterized by enrichment in large ion lithophile elements （LILE）, such as Rb, K, Ba and Pb, and in high field strength elements （HSFE）, such as U and Th, but depletion in Nb and Ta. All samples of the Weiya gabbro display similar chondrite-normalized patterns with moderate enrichment in LREE （72.58-135.61ppm）, moderate depletion in HREE （15.26-25.31ppm） and mild fractionation between LREE and HREE （L/ H=4.09-5.98）. The average initial Sr value of the rock is 0.7069, and δ18O values of the rock range from 5.67‰-8.04‰. In terms of Nd isotope ratios, the Weiya gabbro is characterized by positive eNd（t） values （0.52-0.76）. All these characteristics indicate that the source region of the Weiya gabbro was metasomatized by fluids released from subducted young continental crust, with limited crustal contamination during magma ascent and emplacement. Continental （A-type） subduction was induced by northward subduction of the Paleo-Tethyan oceanic plate during the latest Permian to Triassic. From this point of view, it is supposed that tectonic conversion from the Paleo-Asian to the Paleo-Tethys regime occurred during the latest Permian or earliest Triassic.

Ultra-hot Mesoproterozoic evolution of intracontinental central Australia

The Musgrave Province developed at the nexus of the North, West and South Australian cratons and its Mesoproterozoic evolution incorporates a 100 Ma period of ultra-high temperature （UHT） meta- morphism from ca. 1220 to ca. 1120 Ma. This was accompanied by high-temperature A-type granitic magmatism over an 80 Ma period, sourced in part from mantle-derived components and emplaced as a series of pulsed events that also coincide with peaks in UHT metamorphism. The tectonic setting for this thermal event （the Musgrave Orogeny） is thought to have been intracontinental and the lithospheric architecture of the region is suggested to have had a major influence on the thermal evolution. We use a series of two dimensional, fully coupled thermo-mechanical-petrological numerical models to investi- gate the plausibility of initiating and prolonging UHT conditions under model setup conditions appro- priate to the inferred tectonic setting and lithospheric architecture of the Musgrave Province. The results support the inferred tectonic framework for the Musgrave Orogeny, predicting periods of UHT meta- morphism of up to 70 Ma, accompanied by thin crust and extensive magmatism derived from both crustal and mantle sources. The results also appear to be critically dependent upon the specific location of the Mus^rave Province. constrained between thicker cratonic masses.

ANALYSIS ON GOLD AND COPPER ORE-FORMING SYSTEM WITH COLLISION OROGENY OF EASTERN TIANSHAN

According to tectono stratigraphical division principle, different units in Kangguertage Huangshan collision zone, Eastern Tianshan, are divided into order and disorder two types of stratum rock associations, which belong to two kinds of different tectono volcanic activity belts. The collision ororeny and ductile shear zone have a strong space time coupling. Based on the island arc bearing volcanic rock on both sides of the collision zone, time of ore forming and rock forming, characteristics of collision granit, geochemical province, special multistage collision orogeny and intracontinental orogeny basin forming developed features have been found. Gold and copper deposits, with the relation to the collision orogeny, are divided into seven genetic types. The ten metallogenic zones are classified into two kinds of ore forming system of paleo continental margin. Metallogenesis of gold deposits can be classified into five stages. Gold and copper deposits are distributed in belts with the relation to the development of the collision orogeny. The distribution of main large scale copper deposits in the north part of the collision zone and most large middle scale gold deposits in the south part of the collision zone can direct the prospecting for gold and copper deposits. The actual targets are put forward.

Basic types and geologic significances of“truncation and onlap”unconformities

Based on geologic, seismic and drilling data of basins in China, the basic types of "truncation and onlap" unconformities are examined and their temporal and spatial variation and geologic significances are explored. The "truncation and onlap" unconformities and superimposing styles of overlying and underlying strata vary under different tectonic settings. Under extensional settings, there are three basic superimposing styles and unconformities, such as parallel superimposing style and unconformity with breaking outward, parallel superimposing style and unconformity with breaking inward, as well as superimposing and unconformity style with rotation. Under compressional settings, there are four basic types, such as overlap superimposing style and unconformity on fold, syn-depositional fold superimposing style and unconformity, anticline-syncline superimposing style and unconformity, as well as superimposing style and unconformity in overlap-filling incised valley on top of folds. "Truncation and onlap" unconformities always superimposed each other in space, and exhibit three kinds of superimposed unconformities, i.e., superimposed unconformities formed under continuous uplifting, under transition of uplifting, and under propagation of deposition center. They may also change with time too, i.e., tilting, rotating, folding, and migration. Controlled by the migration of basin depocenters, it is shown that there are unconformities formed under the transition of paleogeomorphy or subsidence center, under the migration of fault-sag, and under the slipping of detachment fault. "Truncation and onlap" unconformities are important positions for traps and significant pathways for hydrocarbon migration, and they are favorable sites for ore deposit and resources occurrence.

The structure of Circum-Tibetan Plateau Basin-Range System and the large gas provinces

Northward subduction of the Cenozoic Tethys ocean caused the convergence and collision of Eurasia-Indian Plates, resulting in the lower crust thickening, the upper crust thrusting, and the Qinghai-Tibet uplifting, and forming the plateau landscape. In company with uplifting and northward extruding of the Tibetan plateau, the contractional tectonic deformations persistently spread outward, building a gigantic basin-range system around the Tibetan plateau. This system is herein termed as the Cir- cure-Tibetan Plateau Basin-Range System, in which the global largest diffuse and the most energetic intra-continental defor- mations were involved, and populations of inheritance foreland basins or thrust belts were developed along the margins of an- cient cratonic plates due to the effects of the cratonic amalgamation, crust differentiation, orogen rejuvenation, and basin sub- sidence. There are three primary tectonic units in the Circum-Tibet Plateau Basin-Range System, which are the reactivated an- cient orogens, the foreland thrust belts, and the miniature cratonic basins. The Circum-Tibetan Plateau Basin-Range System is a gigantic deformation system and particular Himalayan tectonic domain in central-western China and is comparable to the Tibetan Plateau. In this system, northward and eastward developments of thrust deformations exhibit an arc-shaped area along the Kunlun-Altyn-Qilian-Longmenshan mountain belts, and further expand outward to the Altai-Yinshan-Luliangshan- Huayingshan mountain belts during the Late Cenozoic sustained collision of Indo-Asia. Intense intra-continental deformations lead ancient orogens to rejuvenate, young foreland basins to form in-between orogens and cratons, and thrusts to propagate from orogens to cratons in successive order. Driven by the Eurasia-Indian collision and its far field effects, both deformation and basin-range couplings in the arc-shaped area decrease from south to north. When a single basin-range unit is focused on, deformations become younger and younger together with more and more simple structural styles from piedmonts to craton in- teriors. In the Circum-Tibetan Plateau Basin-Range System, it presents three segmented tectonic deformational patterns： prop- agating in the west, growth-overthrusting in the middle, and slip-uplifting in the east. For natural gas exploration, two tectonic units, both the Paleozoic cratonic basins and the Cenozoic foreland thrust belts, are important because hydrocarbon in cen- tral-western China is preserved mainly in the Paleozoic cratonic paleo-highs and the Meso-Cenozoic foreland thrust belts, to- gether with characteristics of multiphrase hydrocarbon generation but late accumulation and enrichment.

Structural architecture of Neoproterozoic rifting depression groups in the Tarim Basin and their formation dynamics

The Tarim Basin is the largest, oil-bearing, superimposed basin in the northwest of China. The evolution and tectonic properties of the initial Tarim Basin have been hotly disputed and remain enigmatic. The Neoproterozoic basin is covered by a vast desert and a huge-thickness of sedimentary strata, has experienced multiple tectonic movements, had a low signal to noise ratios(SNRs) of deep seismic reflection data, all of which have posed critical obstacles to research. We analysed four field outcrops, 18 wells distributed throughout the basin, 27 reprocessed seismic reflection profiles with higher SNRs across the basin and many ancillary local 2D and 3D profiles and aeromagnetic data. We found about 20 normal fault-controlled rifting depressions of the Cryogenian and Ediacaran scattered throughout the basin, which developed on the Precambrian metamorphic and crystalline basement. The structural framework is clearly different from that of the overlying Phanerozoic. The rifting depressions consist of mainly half grabens, symmetrical troughs and horst-grabens. From the northeast to southwest of the basin,they are divided into three rifting depression groups with the WNW, ENE, and NW-trends that are mainly controlled by normal faults. The maximum thicknesses of the strata are up to 4100 m. From the Cryogenian to Ediacaran, most of the main inherited faults to active and eventually ceased at the end of the Ediacaran or Early Cambrian, while subsidence centres appeared and migrated eastward along the faults. They revealed that the different parts of the Tarim continental block were in NNE-SSWoriented and NNW-SSE-oriented extensional paleo-stress fields(relative to the present) during the Neoproterozoic, and were accompanied by clockwise shearing. According to the analysis of the activities of syn-sedimentary faults, filling sediments,magmatic events, and coordination with aeromagnetic anomalies, the tectonic properties of the fault depressions are different and are primarily continental rifts or intra-continental fault-controlled basins. The rifting phases mainly occurred from 0.8–0.61 Ga.The formation of the rifting depression was associated with the initial opening of the South Altun-West Kunlun Ocean and the South Tianshan Ocean, which were located at the northern and southern margins of the Tarim Block, respectively, in response to the break-up of the Supercontinent Rodinia and the initial opening of the Proto-Tethys Ocean.