Repetitive PD control strategy with inverse transfer function compensation for CVCF inverter

A novel repetitive control strategy for the output waveform of single-phase CVCF inverters is presented. In this scheme, the inverse transfer function of inverter is used as a compensator to obtain stable and satisfy harmonic rejection. Besides, PD controller is adopted to improve transient performance. Simulation and experimental results, which are gotten from a DSP-based 400Hz, 5.5KW inverter, indicate that the proposed control scheme can achieve not only low THD during steady-state operation but also fast transient response during load step change.

ON SIMULTANEOUS APPROXIMATION TO A DIFFERENTIABLE FUNCTION AND ITS DERIVATIVE BY INVERSE PAL-TYPE INTERPOLATION POLYNOMIALS

Let ξn-1<ξn-2 <ξn-2 <… < ξ1 be the zeros of the the (n -1)-th Legendre polynomial Pn-1(x) and - 1 = xn < xn-1 <… < x1 = 1 the zeros of the polynomial W n(x) =- n(n - 1) Pn-1(t)dt = (1 -x2)P'n-1(x). By the theory of the inverse Pal-Type interpolation, for a function f(x) ∈ C[-1 1], there exists a unique polynomial Rn(x) of degree 2n - 2 (if n is even) satisfying conditions Rn(f,ξk) = f(∈ek)(1≤ k≤ n - 1) ;R'n(f,xk) = f'(xk)(1≤ k≤ n). This paper discusses the simultaneous approximation to a differentiable function f by inverse Pal-Type interpolation polynomial {Rn(f,x)} (n is even) and the main result of this paper is that if f ∈ C'[1,1], r≥2, n≥ + 2> and n is even thenholds uniformly for all x ∈ [- 1,1], where h(x) = 1 +

A Comprehensive Price Prediction System Based on Inverse Multiquadrics Radial Basis Function for Portfolio Selection

Price prediction plays a crucial role in portfolio selection (PS). However, most price prediction strategies only make a single prediction and do not have efficient mechanisms to make a comprehensive price prediction. Here, we propose a comprehensive price prediction (CPP) system based on inverse multiquadrics (IMQ) radial basis function. First, the novel radial basis function (RBF) system based on IMQ function rather than traditional Gaussian (GA) function is proposed and centers on multiple price prediction strategies, aiming at improving the efficiency and robustness of price prediction. Under the novel RBF system, we then create a portfolio update strategy based on kernel and trace operator. To assess the system performance, extensive experiments are performed based on 4 data sets from different real-world financial markets. Interestingly, the experimental results reveal that the novel RBF system effectively realizes the integration of different strategies and CPP system outperforms other systems in investing performance and risk control, even considering a certain degree of transaction costs. Besides, CPP can calculate quickly, making it applicable for large-scale and time-limited financial market.

A Certain Subclass of Analytic Functions with Bounded Positive Real Part

For real numbers α and β such that 0≤α<1<β, we denote by T(α,β) the class of normalized analytic functions which satisfy , where U denotes the open unit disk. We find some relationships involving functions in the class T(α,β). And we estimate the bounds of coefficients and solve Fekete-Szego problem for functions in this class. Furthermore, we investigate the bounds of initial coefficients of inverse functions or bi-univalent functions.

PERIODIC BOUNDARY VALUE PROBLEM OF QUASILINEAR SYSTEM

The existence and uniqueness results about quasilinear periodic boundary value problems are established by using the global inverse function theorem and the result about the existence and uniquencess of periodic solutions for the periodic boundary value problem of nonhomogeneous linear periodic system.

A NEW QUANTITATIVE WAY FOR DETERMINING LEAF AREA INDEXAND NET PRIMARY PRODUCTIVITY IN REGIONAL SCALE

An inversion of bidirectional reflection distribution fiJnedon (BRDF) wastested using NK Model and NOAA AVHRR datu. The test involVed sensitiveanalysis, optimum inversion selecting, ground simulated expenment, calibrahngmeasuremed with satellite and computer image processmg. Results of comparisonwith NDVI indicatal that inversion of BRDF will have brigh developing prospect inthe next decade.

Moment tensor inversion of the November 6, 1988 MS=7.6, Lancang-Gengma, China,earthquake using long-period body-waves data

Moment tensor inversion was carried out to myert the source mechanism and source time function of the Ms=7.6November 6. 1988, Lancang-Gengma. Yunnan Province, Chin4 earthquake. Waveforms of long-period bodywaves recorded by China Digital Seismograph Network (CDSN) were used in the inversion. The inverted resultshows one nodal plane of right-lateral strike-slip faulting and another of left-lateral strike-slip faulting and a simplesource time function of a duration of about 15 s and scalar seismic moment of 6.4x 102oN-N-m From the geologicaldata and tectonic settings and also from field observations and epicentral distribution of aftershocks, the nodalplane striking in the azimuth of 313° is preferred as the fault plane. The pressure axis lies almost horizontally innorth-south direction.

An improve d smoothe d particle hydrodynamics approach using new inverse kernel function

The main limitation of Smoothed Particle Hydrodynamics(SPH)method that resists the method’s poten-tial is its lack of providing stability and accuracy to the numerical technique.We improve the accuracy of the standard SPH technique,by formulating a new inverse logarithmic kernel function.This new kernel function is derived based on the underlying properties of kernel functions.The approximation technique used here is based on the Moving Least Squares based technique.The adequacy of the proposed ker-nel function is tested by simulation of 2D shock wave propagation and 3D dam-break free surface flow against a cuboidal obstacle.The method was validated against experimental data by Kleefsman et al.,[1].The numerical results reveal that our new SPH approach using inverse logarithmic kernel function outper-forms existing ones in particle restoration,zero error,better accuracy and enhanced efficiency in kernel approximation.This new kernel function showed some improvement over existing kernels by showing very less error approximation value of 0.035h 2.The results showed some improvements over standard technique by being capable of handling problems with large deformations accurately and precisely.

Crustal attenuation characteristics of S-waves beneath the Eastern Tohoku region,Japan

An inversion method was applied to crustal earthquakes dataset to find S-wave attenuation characteristics beneath the Eastern Tohoku region of Japan. Accelerograms from 85 shallow crustal earthquakes up to 25 km depth and magnitude range between 3.5 and 5.5 were analyzed to estimate the seismic quality factor Qs. A homogeneous attenuation model Qs for the wave propagation path was evaluated from spectral amplitudes, at 24 different frequencies between 0.5 and 20 Hz by using generalized inversion technique. To do this, non-parametric attenuation functions were calculated to observe spectral amplitude decay with hypocentral distance. Then, these functions were parameterized to estimate Qs. It was found that in Eastern Tohoku region, the Qs frequency dependence can be approximated with the function 33 f 1.22 within a frequency range between 0.5 and 20 Hz. However, the frequency dependence of Qs in the frequency range between 0.5 and 6 Hz is best approximated by Qs （f） = 36 f 0.94 showing relatively weaker frequency dependence as compared to the relation Qs （f） = 6 f^ 2.09 for the frequency range between 6 and 15 Hz. These results could be used to estimate source and site parameters for seismic hazard assessment in the region.

Use of Local Region Maps on Convolutional LSTM for Single-Image HDR Reconstruction

Low dynamic range(LDR)images captured by consumer cameras have a limited luminance range.As the conventional method for generating high dynamic range(HDR)images involves merging multiple-exposure LDR images of the same scene(assuming a stationary scene),we introduce a learning-based model for single-image HDR reconstruction.An input LDR image is sequentially segmented into the local region maps based on the cumulative histogram of the input brightness distribution.Using the local region maps,SParam-Net estimates the parameters of an inverse tone mapping function to generate a pseudo-HDR image.We process the segmented region maps as the input sequences on long short-term memory.Finally,a fast super-resolution convolutional neural network is used for HDR image reconstruction.The proposed method was trained and tested on datasets including HDR-Real,LDR-HDR-pair,and HDR-Eye.The experimental results revealed that HDR images can be generated more reliably than using contemporary end-to-end approaches.

Research on Pore Pressure-Depth Characteristics in Normal Pressure Reservoir, Bohai Sea Oilfield

In normal pressure of reservoir, formation pressure and depth can not fully reflect the linear relationship between the formation pressure with depth, the change rule of reservoir measured formation pressure and often reduced pressure, understanding unclear cause fluid properties. By introducing basic principles of hydrostatics. The relationship between pressure coefficient and mathematical depth is discussed by mathematical induction analysis of measured pressure data of nearly 50 normal pressure reservoirs in Bohai Oilfield. The results show that the reservoir pressure data is linearly distributed with depth, and the pressure coefficient is inversely proportional to depth. When the depth becomes shallower, the pressure coefficient increases and approaches the reservoir level. As the depth increases, the pressure coefficient decreases and approaches the hydrostatic pressure coefficient infinitely. The study can more accurately analyze the reservoir pressure changes, which is helpful to study the oil and water distribution, reservoir connectivity and fluid properties of atmospheric pressure reservoirs.

SINGULAR MAPS ON THE KLEIN BOTTLE

It is well known that singular maps(i.e.,those have only one face on a surface)play a key role in the theory of up-embeddability of graphs.In this paper the number of rooted singular maps on the Klein bottle is studied.An explicit form of the enumerating function according to the root-valency and the size of the map is determined.Further,an expression of the vertex partition function is also found.

Understanding the pattern and mechanism of spatial concentration of urban land use, population and economic activities: a case study in Wuhan, China

Quantifying the aggregation patterns of urban population, economic activities, and land use are essential for understanding compact development, but little is known about the difference among the distribution characteristics and how the built environment influences urban aggre-gation. In this study, five elements are collected in Wuhan, China, namely population density, floor area ratio, business POIs, road network and built-up area as the representative of urban population, economic activities and land use. An inverse S-shape function is employed to fit the elements’ macro distribution. An aggregation degree index is proposed to measure the aggregation level of urban elements. The kernel density estimation is used to identify the aggregation patterns. The spatial regression model is used to identify the built environment factors influencing the spatial distribution of urban elements. Results indicates that all urban elements decay outward from the city center in an inverse S-shape manner. The business Pointof- Interest (POI) density and population density are highly aggregated;floor area ratio and road density are moderately aggregated, whereas the built-up density is poorly aggregated. Three types of spatial aggregation patterns are identified: a point-shaped pattern, an axial pattern and a planar pattern. The spatial regression modeling shows that the built environment is associated with the distribution of the urban population, economic activities and land use. Destination accessibility factors, transit accessibility factors and land use diversity factors shape the distribution of the business POI density, floor area ratio and road density. Design factors are positively associated with population density, floor area ratio and built-up density. Future planning should consider the varying spatial concentration of urban population, economic activities and land use as well as their relationships with built environment attributes. Results of this study will provide a systematic understanding of aggregation of urban land use, popula-tion, and economic activities in megacities as well as some suggestions for planning and compact development.