Microfluidic-oriented synthesis of enriched iridium nanodots/carbon architecture for robust electrocatalytic nitrogen fixation

Electrocatalytic nitrogen reduction reaction(NRR)is considered as a promising candidate to achieve ammonia synthesis because of clean electric energy,moderate reaction condition,safe operating process and harmless by-products.However,the chemical inertness of nitrogen and poor activated capacity on catalyst surface usually produce low ammonia yield and faradic efficiency.Herein,the microfluidic technology is proposed to efficiently fabricate enriched iridium nanodots/carbon architecture.Owing to in-situ co-precipitation reaction and microfluidic manipulation,the iridium nanodots/carbon nanomaterials possess small average size,uniform dispersion,high conductivity and abundant active sites,producing good proton activation and rapid electrons transmission and moderate adsorption/desorption capacity.As a result,the as-prepared iridium nanodots/carbon nanomaterials realize large ammonia yield of 28.73 μg h^(-1) cm^(-2) and faradic efficiency of 9.14%in KOH solution.Moreover,the high ammonia yield of 11.21 μg h^(-1) cm^(-2) and faradic efficiency of 24.30%are also achieved in H_(2)SO_(4) solution.The microfluidic method provides a reference for large-scale fabrication of nano-sized catalyst materials,which may accelerate the progress of electrocatalytic NRR in industrialization field.

Synthesis,crystal structure and photo-physical properties of tris(4-methyl-2,5-diphenylpyridine)iridium for OLED

Organic light-emitting diodes(OLEDs)have important applications in the field of next-generation displays and lighting,and phosphorescent iridium complexes are an important class of electroluminescent phosphorescent materials.In this paper,Ir(bmppy)_(3),tris(4-methyl-2,5-diphenylpyridine)iridium,was synthesized and elvaluted for photo-physical characteristics.Single crystals suitale for X-ray diffraction(XRD)were grown from a mixture solvent of dichloromethane and absolute ethanol.The composition and structur of Ir(bmppy)_(3)were determined by element analysis,NMR spectra and XRD.The complex crystallizes in the monoclinic symmetry with the space group P21/c with a slightly distorted octahedral configuration.As measured by UV-Visible and photoluminescence spectra,Ir(bmppy)_(3) displays a maximum emission at at 527 nm at ambient temperature,a typical green-emitting profile.The complex has potential for application in the OLED industry.

Effective ethanol-to-CO_(2) electrocatalysis at iridium-bismuth oxide featuring the impressive negative shifting of the working potential

Since low overpotential for the anodic ethanol oxidation reaction(EOR)can favor the higher output voltage and power of direct ethanol fuel cells(DEFCs),it is critical to design new EOR catalysts with efficient ethanol-to-CO_(2)activity at low applied potentials.Thereby,carbon-supported Ir-Bi_(2)O_(3)(Ir-Bi_(2)O_(3)/C)catalysts with highly dispersive bismuth oxide on the iridium surface are designed and prepared,which can merit splitting the ethanol C–C bond and promoting the oxidation of C1 intermediates at the bifunctional interfaces.The as-obtained Ir-Bi2O3/C catalysts show superior EOR mass activity of up to ca.2250 m A mgIr-1.Moreover,they exhibit the record lowest onset oxidation potentials(0.17–0.22 V vs.RHE)and the peak potential(ca.0.58 V vs.RHE),being 130–300 m V lower than the previous landmark noble metallic catalysts.Furthermore,an apparent C1 pathway faraday efficiency(FEC1)of 28%±5.9%at 0.5 V vs.RHE can be obtained at Ir-Bi_(2)O_(3)/C.This work might provide new insights into the new anodic EOR catalysts for increasing the power of DEFCs.

Electrodeposition of iridium from composite ionic liquid

In order to study the electrodeposition process of iridium in composite ionic liquid, the effects of N, N-dimethylacetamide（DMAC） on the viscosity, conductivity and electrochemical stability of composite ionic liquid BMIC-BMIBF4, as well as the electrochemical behavior of Ir Cl3 in this system were studied. Iridium（Ir） coatings were deposited at different constant potentials and characterized by SEM and XRD. The results show that the addition of DMAC can evidently decrease the viscosity of the composite system, increase conductivity and improve electrochemical stability of the composite system. Cyclic voltammograms of a Au electrode illustrate that the process controlled by diffusion rate is irreversible with the average charge transfer coefficient of 0.170 and average diffusion coefficient of 1.096×10-6 cm^2/s. In addition, SEM image shows that Ir film deposited at the reduction peak potential is dense and even, while XRD pattern shows that Ir deposit is polycrystalline structure.

Microwave Assisted Synthesis of a New Triplet Iridium（Ⅲ） Pyrazine Complex

A new cyclometalated iridium（IlI） complex Ir（DPP）3 （DPP=2,3-diphenylpyrazine） was prepared by reaction of DPP with iridium trichloride hydrate under microwave irradiation. The structure of the complex was confirmed by elemental analysis, ^1H NMR, and mass spectroscopy. The UV-Vis absorption and photoluminescent properties of the complex were investigated. The complex shows strong ^1MLCT （singlet metal to ligand charge-transfer） and aMLCT （triplet metal to ligand charge-transfer） absorption at 382 and 504 nm, respectively. The complex also shows strong photoluminescence at 573 nm at room temperature. These results suggest the complex to be a promising phosphorescent material.

Iridium/ORBCOMM机会信号融合定位技术

在全球导航卫星系统(GNSS)不可用情况下,低地球轨道(LEO)卫星机会信号(SOP)定位技术是一种有效的导航定位解决方案。单LEO星座机会信号定位技术面临星座构型不足或可见卫星偏少等问题,多LEO星座机会信号融合定位技术可有效解决该问题。通过分析瞬时多普勒定位原理,建立了Iridium/ORBCOMM机会信号融合定位模型,引入基于Helmert方差估计的加权最小二乘算法进一步提高定位精度。实测数据表明:基于Helmert方差估计的Iridium/ORBCOMM机会信号融合定位精度优于70 m,验证了多LEO星座机会信号融合定位的可行性和有效性。

Operationally Simple Enantioselective Silane Reduction of Ketones by the [Ir(OMe)(cod)]2/Azolium Catalytic System

An operationally simple protocol was designed for the enantioselective silane reduction (ESR) of ketones using air- and moisture-stable [Ir(OMe)(cod)]2 (cod = 1,5-cyclooctadiene) (3) as a metal catalyst precursor. This reaction was driven by chiral hydroxyamide-functionalized azolium salt 2. The catalytic ESR reaction could be performed under benchtop conditions at room temperature. Treatment of 2 with 3 in THF yielded the monodentate IrCl(NHC)(cod) (NHC = N-heterocyclic carbene) complex 4 in 93% yield, herein the anionic methoxy ligand of 3 serves as an internal base that deprotonates the azolium ring of 2. The well-defined Ir complex 4 catalyzed the ESR reaction of propiophenone (6) with (EtO)2MeSiH using the pre-mixing reaction procedure. Based on this success, the catalytic ESR reaction was designed and implemented using an in situ-generated NHC/Ir catalyst derived from 2 and 3. Thus, a wide variety of aryl ketones could be reduced to the corresponding optically active alcohols in moderate to excellent stereoselectivities at room temperature without temperature control. Since the high catalytic activity of 3 was observed, we next evaluated several other transition metal catalyst precursors for the catalytic ESR reaction under the influence of 2. This evaluation revealed that Ir(acac)(cod) (acac = acetylacetonate) (28) and [IrCl(cod)]2 (5) can be successfully used as metal catalyst precursors in the ESR reaction.

基于Iridium9523的低功耗极地图像监控系统设计

为实现极地设备运行情况监测无人化,设计了基于Iridium 9523的低功耗极地图像监控系统。系统主要由图像采集单元、温度控制单元、数据传输单元组成。采用串口摄像头进行图像采集,温度控制单元解决了低温情况下摄像头不能采集图像的问题,Iridium 9523卫星通讯模块实现数据传输。低温实验与室外实验结果表明,系统稳定工作的温度可低至-40℃。本系统在中国第9次北极科考中进行了安装,在极地低温恶劣环境下运行稳定可靠,实现了极地设备的图像监控。

基于Iridium系统卫星网络路由算法的OPNET建模与仿真

互联网的普及和空间卫星技术的不断飞速发展,使空间卫星网络技术逐渐成为下一代通信网络的研究热点之一。由于OPNET缺少相应的标准卫星模块,必然使得空间网络的仿真存在一定的难度。针对Iridium系统卫星网络,搭建一种OPNET路由仿真模型。该仿真模型主要由三部分组成:卫星网络域、卫星节点域和路由进程域。卫星网络域构建整体的网络拓扑结构及卫星运行轨迹;节点域模拟数据的生成和收发;进程域完成路由算法的操作。为了检验模型,仿真分析了一种星上路由算法的平均路由跳数与延时性能。仿真结果表明,所提仿真模型与理论研究相符合,且不仅可以通过修改路由进程域实现多种路由算法策略,还可以为后续卫星网络抗毁性能的研究提供一种简单有效的技术手段。

Phosphorescent Cationic Iridium（Ⅲ） Complexes with 1,3,4-Oxadiazole Cyclometalating Ligands： Solvent-Dependent Excited-State Dynamics

To elucidate the nature of low-lying triplet states and the effect of ligand modifica- tions on the excited-state properties of functional cationic iridium complexes, the solvent- dependent excited-state dynamics of two phosphorescent cationic iridium（Ⅲ） complexes, namely [Ir（dph-oxd）2（bpy）]PF6 （1） and [Ir（dph-oxd）2（pzpy）]Pf6 （2）, were investigated by femtosecond and nanosecond transient absorption spectroscopy. Upon photoexcitation to the metal-to-ligand charge-transfer （MLCT） states, the excited-state dynamics shows a rapid process （τ-=0.7-3 ps） for the formation of solvent stabilized 3MLCT states, which significantly depends on the solvent polarity for both 1 and 2. Sequentially, a relatively slow process assigned to the vibrational cooling/geometrical relaxation and a long-lived phospho- rescent emissive state is identified. Due to the different excited-state electronic structures regulated by ancillary ligands, the solvation-induced stabilization of the 3MLCT state in 1 is faster than that in 2. The present results provide a better sight of excited-state relaxation dynamics of ligand-related iridium（Ⅲ） complexes and solvation effects on triplet manifolds.

Iridium‐containing water‐oxidation catalysts in acidic electrolyte

With the goal of constructing a carbon‐free energy cycle,proton‐exchange membrane(PEM)water electrolysis is a promising technology that can be integrated effectively with renewable energy resources to produce high‐purity hydrogen.IrO2,as a commercial electrocatalyst for the anode side of a PEM water electrolyzer,can both overcome the high corrosion conditions and exhibit efficient catalytic performance.However,the high consumption of Ir species cannot meet the sustainable development and economic requirements of this technology.Accordingly,it is necessary to understand the OER catalytic mechanisms for Ir species,further designing new types of low‐iridium catalysts with high activity and stability to replace IrO2.In this review,we first summarize the related catalytic mechanisms of the acidic oxygen evolution reaction(OER),and then provide general methods for measuring the catalytic performance of materials.Second,we present the structural evolution results of crystalline IrO2 and amorphous IrOx using in situ characterization techniques under catalytic conditions to understand the common catalytic characteristics of the materials and the possible factors affecting the structural evolution characteristics.Furthermore,we focus on three types of common low‐iridium catalysts,including heteroatom‐doped IrO2(IrOx)‐based catalysts,perovskite‐type iridium‐based catalysts,and pyrochlore‐type iridium‐based catalysts,and try to correlate the structural features with the intrinsic catalytic performance of materials.Finally,at the end of the review,we present the unresolved problems and challenges in this field in an attempt to develop effective strategies to further balance the catalytic activity and stability of materials under acidic OER catalytic conditions.

Iridium Coating Deposited by Double Glow Plasma Technique——Effect of Glow Plasma on Structure of Coating at Single Substrate Edge

Double glow plasma technique has a high deposition rate for preparing iridium coating. However, the glow plasma can influence the structure of the coating at the single substrate edge. In this study, the iridium coating was prepared by double glow plasma on the surface of single niobium substrate. The microstructure of iridium coating at the substrate edge was observed by scanning electron microscopy. The composition of the coating was confirmed by energy dispersive spectroscopy and X-ray diffraction. There was a boundary between the coating and the substrate edge. The covered area for the iridium coating at the substrate edge became fewer and fewer from the inner area to the outer flange-area. The bamboo sprout-like particles on the surface of the substrate edge were composed of elemental niobium. The substrate edge was composed of the Nb coating and there was a transition zone between the Ir coating and the Nb coating. The interesting phenomenon of the substrate edge could be attributed to the effects of the bias voltages and the plasma cloud in the deposition chamber. The substrate edge effect could be mitigated or eliminated by adding lots of small niobium plates around the substrate in a deposition process.

Superior performance of iridium supported on rutile titania for the catalytic decomposition of N_2O propellants

N2O is a promising green propellant and exhibits great potential for satellite propulsion systems. It is difficult for catalytic decomposition, which is an important way to initiate the propulsion process, to occur at temperatures below 600 °C due to the high activation energy of N2O. In this work, we report an Ir supported on rutile TiO2（Ir/r-TiO2） catalyst which exhibits a fairly high activity for high-concentration N2O decomposition. HAADF-STEM, H2-TPR, and XPS results indicate that highly dispersed Ir particles and improved oxygen mobility on the Ir/r-TiO2 could facilitate the decompo-sition of N2O and desorption of the adsorbed oxygen. Bridge-bonded peroxide intermediates were observed with in-situ DRIFT and herein, a detailed decomposition route is proposed.

Efficient acidic oxygen evolution reaction electrocatalyzed by iridium-based 12L-perovskites comprising trinuclear face-shared IrO6 octahedral strings

Development of cost-effective and highly active oxygen evolution catalysts operating well in acidic media is a critical challenge in proton exchange membrane water electrolysis.Herein,we present a class of iridium-based 12L-perovskites(Ba4MIr3O12;M=Pr,Bi,Nb)as novel low-iridium electrocatalysts for oxygen evolution reaction under acidic conditions.These 12L-perovskites contain trinuclear face-shared Ir O6octahedral strings—unique subunits that are not found in the previously-reported iridium-based electrocatalysts.The catalytic activities of 12L-perovskites(Ba4MIr3O12)are found to be related to the location of O 2p-band center,which is influenced by the B-site nonprecious element(i.e.,Pr,Bi or Nb).Our experimental results show that Ba4PrIr3O12is the most active electrocatalyst among the materials we synthesize,and contains 55%less iridium than the benchmark catalyst IrO2,while exhibiting higher catalytic activity.In the presence of Ba4PrIr3O12,transient leaching process of Ba and Pr takes place during electrochemical process,contributing to the surface reconstruction of the pristine catalysts.Further experimental results reveal that the formation of under-coordinated Ir Ox-rich surface and easier generation of active intermediate IrVare mainly responsible for the good activity of Ba4PrIr3O12.

Solid-state electrochemiluminescence of a novel iridium(Ⅲ) complex

The solid-state ECL behavior of a water-insoluble bis-cyclometalated （pq）2Ir（N-phMA） complex is presented, in which pq is a 2-phenylquinoline anion and N-phMA is N-phenyl methacrylamide, a monoanionic bidentate ligand. The MWNTs/（pq）2Ir（N-phMA） film, MWNTs/Ru（bpy）3^2＋ film and （pq）2Ir（N-phMA） directly modified glassy carbon electrode were fabricated; only the MWNTs/（pq）2Ir（N-phMA） film can produce steady ECL in the presence of tri-n-propylamine as a coreactant.

Synthesis and Photoluminescence of a Novel Iridium Complex (BuPhOXD)_2Ir(acac) with Unit of 1, 3, 4-Oxadiazole

A novel cyclometalated iridium complex with 1, 3, 4-oxadiazole moiety was synthesizedand characterized. Its UV and photoluminescent properties were studied. The strong UVabsorption intensity around 462 nm attributed to spin-forbidden triplet metal–ligand charge transferband and photoluminescence at 518 nm were observed. This indicated that achieved iridiumcomplex could be used as an efficient electrophosphorescent material.

Gold-iridium bifunctional electrocatalyst for oxygen reduction and oxygen evolution reactions

Carbon supported gold-iridium composite(Au Ir/C) was synthesized by a facile one-step process and was investigated as the bifunctional catalyst for oxygen reduction reaction(ORR) and oxygen evolution reaction(OER). The physical properties of the Au Ir/C composite were characterized by transmission electron microscopy(TEM), X-ray diffraction(XRD) and X-ray photoelectron spectroscopy(XPS). Although the Au and Ir in the Au Ir/C did not form alloy, it is clear that the introduction of Ir decreases the average Au particle size to 4.2 nm compared to that in the Au/C(10.1 nm). By systematical analysis on chemical state of metal surface via XPS and the electrochemical results, it was found that the Au surface for the Au/C can be activated by potential cycling from 0.12 V to 1.72 V, resulting in the increased surface roughness of Au,thus improving the ORR activity. By the same potential cycling, the Ir surface of the Ir/C was irreversibly oxidized, leading to degraded ORR activity but uninfluenced OER activity. For the Au Ir/C, Ir protects Au against being oxidized due to the lower electronegativity of Ir. Combining the advantages of Au and Ir in catalyzing ORR and OER, the Au Ir/C catalyst displays an enhanced catalytic activity to the ORR and a comparable OER activity. In the 50-cycle accelerated aging test for the ORR and OER, the Au Ir/C displayed a satisfied stability, suggesting that the Au Ir/C catalyst is a potential bifunctional catalyst for the oxygen electrode.

Synthesis and optophysical properties of blue-emitting iridium (Ⅲ) complex bearing oxadiazole-based picolinic acid derivative

An iridium （Ⅲ） bis[（4,6-difluorophenyl）pyridinato-N, C^2][6-（6＇-（4＂-（ 5＂-phenyl- 1＂, 3＂, 4＂-oxadiazole-2＂-yl） phenoxy） hexyloxy picolinate） was synthesized and characterized by IH NMR and elementary analysis in order to study the effect of ancillary ligand of the oxadiazole-based picolinic acid derivative on optophysical properties of its iridium complex, and further to obtain an iridium complex with highly-efficient blue emission. The thermal stability, UV absorption and photoluminescent properties of this iridium complex were investigated. Compared with iridium （Ⅲ） bis[（4,6-difluorophenyl）pyridinato-N, C^2]（picolinate） reported as a highly-efficient blue electroluminescent material, this iridium complex bearing an oxadiazole-based picolinic acid derivative presents higher thermal stability, more intense UV absorption at 291 nm and similar photoluminescent spectrum peaked at 469 nm. This indicates that tuning ancillary ligand of picolinic acid with an oxadiazole unit can improve the optophysical properties of its iridium complex.

Iridium oxide fabrication and application: A review

Despite the scarcity and cost of iridium oxide,it is still the material of choice in numerous fields of science and applications,including capacitors,electrochromism,sensors,and various oxidation electrocatalysis(e.g.,chlorine evolution reaction,detoxification,and oxygen evolution reaction).Such versatility is attributed to the distinct features of iridium oxides,such as their activity,biocompatibility,conductivity,and durability.The features and properties of iridium oxides are strongly dependent on the fabrication method.In this review,methodologies relating to the synthesis and fabrication of solid-state iridium oxides have been thoroughly collected and discussed.Structuring and crystallization techniques for iridium oxides are also noted.At the end of the review,the effects of utilizing a certain fabrication method on the characteristics of the iridium oxide product are recapitulated,together with the recommended application of the product in various fields.

Preparation of iridium nano-and submicroparticles on solid substrates by direct surface growth and drop-drying assembly

Iridium nanoparticles (IrNPs) and submicroparticles (IrSMPs) with different shapes were synthesized and assembled on indium thin oxide (ITO) and Si substrates using two different methods: direct surface growth and drop-drying assembly. The obtained IrNPs and IrSMPs were characterized using scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS). The IrSMPs (or IrNPs) with disc-like shape and irregular shapes were obtained on ITO substrate by direct surface growth method using polyvinylpyrrolidone (PVP) and sodium citrate as different stabilizers, respectively. The reaction time and the injection temperature of reducing agent are found to have great effect on the size and morphology of the surface-grown Ir particles. The disc-like, ellipsoidal, and spherical IrSMPs (or IrNPs) were also synthesized in homogeneous solution in the presence of H3BO3 and Na2B4O7 as assistant-stabilizer. These IrNPs and IrSMPs were used as building blocks to construct nanoparticle assemblies by using a simple drop-drying method. Uniform IrNP and IrSMP assemblies were successfully prepared on Si and ITO substrates, indicating that the drop-drying method is efficient for the preparation of not only nanoparticle assemblies but also submicroparticle assemblies.