The safety valve is an important component to ensure the safe operation of lithium-ion batteries(LIBs).However,the effect of safety valve type on the thermal runaway(TR)and gas venting behavior of LIBs,as well as the ...The safety valve is an important component to ensure the safe operation of lithium-ion batteries(LIBs).However,the effect of safety valve type on the thermal runaway(TR)and gas venting behavior of LIBs,as well as the TR hazard severity of LIBs,are not known.In this paper,the TR and gas venting behavior of three 100 A h lithium iron phosphate(LFP)batteries with different safety valves are investigated under overheating.Compared to previous studies,the main contribution of this work is in studying and evaluating the effect of gas venting behavior and TR hazard severity of LFP batteries with three safety valve types.Two significant results are obtained:(Ⅰ)the safety valve type dominates over gas venting pressure of battery during safety venting,the maximum gas venting pressure of LFP batteries with a round safety valve is 3320 Pa,which is one order of magnitude higher than other batteries with oval or cavity safety valve;(Ⅱ)the LFP battery with oval safety valve has the lowest TR hazard as shown by the TR hazard assessment model based on gray-fuzzy analytic hierarchy process.This study reveals the effect of safety valve type on TR and gas venting,providing a clear direction for the safety valve design.展开更多
The recycling of spent LiFePO_(4)batteries has received extensive attention due to its environmental impact and economic benefit.In the pretreatment process of spent LiFePO_(4)batteries,the separation of active materi...The recycling of spent LiFePO_(4)batteries has received extensive attention due to its environmental impact and economic benefit.In the pretreatment process of spent LiFePO_(4)batteries,the separation of active materials and current collectors determines the difficulty of the re-covery process and product quality.In this work,a facile and efficient pretreatment process is first proposed.After only freezing the electrode pieces and immersing them in boiling water,LiFePO_(4)materials were peeled from the Al foil.Then,after roasting under an inert atmosphere and sieving,all the cathode and anode active materials were easily and efficiently separated from the Al and Cu foils.The active materials were subjected to acid leaching,and the leaching solution was further used to prepare FePO_(4)and Li_(2)CO_(3).Finally,the battery-grade FePO_(4)and Li_(2)CO_(3)were used to re-synthesize LiFePO_(4)/C via the carbon thermal reduction method.The discharge capacities of re-synthesized LiFePO_(4)/C cathode were 144.2,139.0,133.2,125.5,and 110.5 mA·h·g−1 at rates of 0.1,0.5,1,2,and 5 C,which satisfies the requirement for middle-end LiFePO_(4)batteries.The whole process is environmental and has great potential for industrial-scale recycling of spent lithium-ion batteries.展开更多
Due to the large error of the traditional battery theoretical model during large-rate discharge for electromagnetic launch,the Shepherd derivative model considering the factors of the pulse cycle condition,temperature...Due to the large error of the traditional battery theoretical model during large-rate discharge for electromagnetic launch,the Shepherd derivative model considering the factors of the pulse cycle condition,temperature,and life is proposed by the Naval University of Engineering.The discharge rate of traditional lithium-ion batteries does not exceed 10C,while that for electromagnetic launch reaches 60C.The continuous pulse cycle condition of ultra-large discharging rate causes many unique electrochemical reactions inside the cells.The traditional model cannot accurately describe the discharge characteristics of the battery.The accurate battery theoretical model is an important basis for system efficiency calculation,precise discharge control,and remaining capacity prediction.To this purpose,an experimental platform for electromagnetic launch is built,and discharge characteristics of the battery under different rate,temperature,and life decay are measured.Through the experimental test and analysis,the reason that the traditional model cannot accurately characterize the large-rate discharge process is analyzed.And a novel battery theoretical model is designed with the help of genetic algorithm,which is integrated with the electromagnetic launch topology.Numerical simulation is compared with the experimental results,which verifies the modeling accuracy for the large-rate discharge.On this basis,a variety of discharge conditions are applied to test the applicability of the model,resulting in better results.Finally,with the continuous cycle-pulse condition in the electromagnetic launch system,the stability and accuracy of the model are confirmed.展开更多
基金supported by the National Key R&D Program of China(No.2021YFB2402001)the Postgraduate Innovation and Entrepreneurship Practice Project of Anhui Province(No.2022cxcysj013)+2 种基金the China Postdoctoral Science Foundation(No.2022T150615)the Fundamental Research Funds for the Central Universities(No.WK5290000002)supported by Youth Innovation Promotion Association CAS(No.Y201768)。
文摘The safety valve is an important component to ensure the safe operation of lithium-ion batteries(LIBs).However,the effect of safety valve type on the thermal runaway(TR)and gas venting behavior of LIBs,as well as the TR hazard severity of LIBs,are not known.In this paper,the TR and gas venting behavior of three 100 A h lithium iron phosphate(LFP)batteries with different safety valves are investigated under overheating.Compared to previous studies,the main contribution of this work is in studying and evaluating the effect of gas venting behavior and TR hazard severity of LFP batteries with three safety valve types.Two significant results are obtained:(Ⅰ)the safety valve type dominates over gas venting pressure of battery during safety venting,the maximum gas venting pressure of LFP batteries with a round safety valve is 3320 Pa,which is one order of magnitude higher than other batteries with oval or cavity safety valve;(Ⅱ)the LFP battery with oval safety valve has the lowest TR hazard as shown by the TR hazard assessment model based on gray-fuzzy analytic hierarchy process.This study reveals the effect of safety valve type on TR and gas venting,providing a clear direction for the safety valve design.
基金This work was financially supported by the Key-Area Research and Development Program of Guangdong Province,China(No.2020B090919003)the National Natural Science Foundation of China(Nos.51834008,51874040,and U1802253)the Fundamental Research Funds for the Central Universities(No.FRF-TP-18-020A3).
文摘The recycling of spent LiFePO_(4)batteries has received extensive attention due to its environmental impact and economic benefit.In the pretreatment process of spent LiFePO_(4)batteries,the separation of active materials and current collectors determines the difficulty of the re-covery process and product quality.In this work,a facile and efficient pretreatment process is first proposed.After only freezing the electrode pieces and immersing them in boiling water,LiFePO_(4)materials were peeled from the Al foil.Then,after roasting under an inert atmosphere and sieving,all the cathode and anode active materials were easily and efficiently separated from the Al and Cu foils.The active materials were subjected to acid leaching,and the leaching solution was further used to prepare FePO_(4)and Li_(2)CO_(3).Finally,the battery-grade FePO_(4)and Li_(2)CO_(3)were used to re-synthesize LiFePO_(4)/C via the carbon thermal reduction method.The discharge capacities of re-synthesized LiFePO_(4)/C cathode were 144.2,139.0,133.2,125.5,and 110.5 mA·h·g−1 at rates of 0.1,0.5,1,2,and 5 C,which satisfies the requirement for middle-end LiFePO_(4)batteries.The whole process is environmental and has great potential for industrial-scale recycling of spent lithium-ion batteries.
基金This study was supported by the National Natural Science Foundation of China(Nos.51607187,51877214,51907203,51925704,and 52107235)the Hubei Provincial Natural Science Foundation of China(Nos.2019CFB371 and 2019CFB373)partially by No.12 Special Financial 349 Aid to China Postdoctoral Science Foundation(No.2019T120972).
文摘Due to the large error of the traditional battery theoretical model during large-rate discharge for electromagnetic launch,the Shepherd derivative model considering the factors of the pulse cycle condition,temperature,and life is proposed by the Naval University of Engineering.The discharge rate of traditional lithium-ion batteries does not exceed 10C,while that for electromagnetic launch reaches 60C.The continuous pulse cycle condition of ultra-large discharging rate causes many unique electrochemical reactions inside the cells.The traditional model cannot accurately describe the discharge characteristics of the battery.The accurate battery theoretical model is an important basis for system efficiency calculation,precise discharge control,and remaining capacity prediction.To this purpose,an experimental platform for electromagnetic launch is built,and discharge characteristics of the battery under different rate,temperature,and life decay are measured.Through the experimental test and analysis,the reason that the traditional model cannot accurately characterize the large-rate discharge process is analyzed.And a novel battery theoretical model is designed with the help of genetic algorithm,which is integrated with the electromagnetic launch topology.Numerical simulation is compared with the experimental results,which verifies the modeling accuracy for the large-rate discharge.On this basis,a variety of discharge conditions are applied to test the applicability of the model,resulting in better results.Finally,with the continuous cycle-pulse condition in the electromagnetic launch system,the stability and accuracy of the model are confirmed.