A systematic study was carried out to investigate the promotion effect of manganese on the performance of a coprecipitated iron-manganese bimetallic catalyst for the light olefins synthesis from syngas. The catalyst s...A systematic study was carried out to investigate the promotion effect of manganese on the performance of a coprecipitated iron-manganese bimetallic catalyst for the light olefins synthesis from syngas. The catalyst samples were characterized by N2 physisorption, transmis- sion electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), powder X-ray diffraction (XRD), Mossbauer spectroscopy, H2- differential thermogravimetric analysis (H2-DTG), CO temperature-programmed reduction (CO-TPR) and CO2 temperature-programmed des- orption (CO2-TPD). The Fischer-Tropsch synthesis (FTS) performance of the catalyst was measured at 1.5 MPa, 250 ℃ and syngas with H2/CO ratio of 2.0. The characterization results indicated that the addition of manganese decreases the catalyst crystallite size, and improves the catalyst BET surface area and pore volume. The presence of manganese suppresses the catalyst reduction and carburization in H2, CO and syngas, respectively. The addition of manganese improves the catalytic activity of water-gas shift reaction and suppresses the oxidation of iron carbides in the FTS reaction. The incorporation of manganese improves the catalyst surface basicity and results in a significant improvement in the selectivities to light olefins and heavy hydrocarbons (C5+), and furthermore an inhibition of methane formation in FTS. The pure iron catalyst (Mn-00) has the highest initial FTS catalytic activity (65%) and the lowest selectivity (17.35 wt%) to light olefins (C2=-C4=). The addition of an appropriate amount of manganese can improve the catalyst FTS activity.展开更多
Iron-manganese composited oxide(FeMnO) was prepared with potassium permanganate and ferrous salt. Interface performance, charge property and structure topography of the FeMnO were investigated. Coagulation efficienc...Iron-manganese composited oxide(FeMnO) was prepared with potassium permanganate and ferrous salt. Interface performance, charge property and structure topography of the FeMnO were investigated. Coagulation efficiency and pollution removal mechanism of the FeMnO were approached. Results show that the main compositions of the FeMnO are δ-manganese dioxide and ferric hydroxide. The specific surface area is about 146.22 m^2/g. The FeMnO contains rich hydroxyl with extremely strong adsorption action and chemical adsorption activity. The zero charge point of the oxide in pure water is about 8.0 of pH value. Under neutral pH value conditions, the FeMnO particle surface carried positive charges. The FeMnO particles are quasi-spherical micro-particles with irregular sizes adjoined each other to form net construction. Phosphorus removal efficiency of the FeMnO is remarkable, the total dissoluble phosphorus of settled water can be reduced below detecting level(0.3 μtg/L) at a FeMnO dosage of 6 mg/L, and total phosphorus below detecting level at a FeMnO dosage of 10 mg/L, for water samples containing total phos- phorus of 1281.70 μg/L and total dissoluble phosphorus of 1187.91 μtg/L. The mechanism of effective coagulation for phosphorus removal is combined results of multiple actions of adsorption, charge neutralization, adsorption/bridging and so on.展开更多
A sort of purplish red iron-manganese nodules was found in the Middle Ordovician Guniutan-Miaopu period limestone, Anhui Province. About their formational environment, there are two different viewpoints:Yue thought th...A sort of purplish red iron-manganese nodules was found in the Middle Ordovician Guniutan-Miaopu period limestone, Anhui Province. About their formational environment, there are two different viewpoints:Yue thought they were deep-water pelagic deposit and Huang et al. believed they were formed inshallow water tide. We think that these nodules were formed in drowned platform margin belonging to atransitional type between shallow-water and deep-water iron-manganese nodules, and different from shoalwater iron-manganese oolites and pelagic iron-manganese nodules in feature and origin. 1 Palaeogeographic setting of iron-manganese nodules展开更多
In recent years,iron(Fe)based degradable metal is explored as an alternative to permanent fracture fixation devices.In the present work,copper(Cu)is added in Fe-Mn system to enhance the degradation rate and antimicrob...In recent years,iron(Fe)based degradable metal is explored as an alternative to permanent fracture fixation devices.In the present work,copper(Cu)is added in Fe-Mn system to enhance the degradation rate and antimicrobial properties.Fe-Mn-x Cu(x=0.9,5 and 10 wt.%)alloys are prepared by the meltingcasting-forging route.XRD analysis confirms austenite phase stabilization due to the presence of Mn and Cu.As predicted by Thermo-Calc calculations,Cu rich phase precipitations are noticed along the austenite grain boundaries.Degradation behaviours of Cu added Fe-Mn alloys are investigated through static immersion and electrochemical polarization where enhanced degradation is found for higher Cu added alloys.When challenged against E.Coli bacteria,the Fe-Mn-Cu alloy media extract shows a significant bactericidal effect compare to the base alloy.In vitro cytocompatibility studies,as determined using MG63 and MC3T3-E1 cell lines,indicate increased cell density as a function of time for all the alloys.When implanted in rabbit femur,the newly developed alloy does not show any kind of tissue necrosis around the implants.Better osteogenesis and higher new bone formation are observed with Fe-Mn-10 Cu alloy as evident from micro-computed tomography(μ-CT)and fluorochrome labelling.展开更多
The effects of Manganese (Mn) incorporation on a precipitated iron-based Fischer-Tropsch synthesis (FTS) catalyst were investigated using N2 physical adsorption, air differential thermal analysis (DTA), H2 tempe...The effects of Manganese (Mn) incorporation on a precipitated iron-based Fischer-Tropsch synthesis (FTS) catalyst were investigated using N2 physical adsorption, air differential thermal analysis (DTA), H2 temperature-programmed reduction (TPR), and Mǒssbauer spectroscopy. The FTS performances of the catalysts were tested in a slurry phase reactor. The characterization results indicated that Mn increased the surface area of the catalyst, and improved the dispersion of (α-Fe2O3 and reduced its crystallite size as a result of the high dispersion effect of Mn and the Fe-Mn interaction. The Fe-Mn interaction also suppressed the reduction of (α-Fe2O3 to Fe3O4, stabilized the FeO phase, and (or) decreased the carburization degree of the catalysts in the H2 and syngas reduction processes. In addition, incorporated Mn decreased the initial catalyst activity, but improved the catalyst stability because Mn restrained the reoxidation of iron carbides to Fe3O4, and improved further carburization of the catalysts. Manganese suppressed the formation of CH4 and increased the selectivity to light olefins (C2-4^=), but it had little effect on the selectivities to heavy (C5+) hydrocarbons. All these results indicated that the strong Fe-Mn interaction suppressed the chemisorptive effect of the Mn as an electronic promoter, to some extent, in the precipitated iron-manganese catalyst system.展开更多
Low temperature plasma was used to treat sludge,and the effects of discharge time on the content of different forms of heavy metals in the sludge were studied. The results showed that Cu and Zn content in the domestic...Low temperature plasma was used to treat sludge,and the effects of discharge time on the content of different forms of heavy metals in the sludge were studied. The results showed that Cu and Zn content in the domestic sludge could basically meet the requirements of GB 4284-2018,GB/T 23486-2009,CJ/T 362-2011 and CJ/T 309-2009. There were big differences between different forms of the heavy metals. According to the proportions of different forms of Cu in the sludge,different forms of Cu are arranged as follows: organic state > carbonate bound state> residual state > exchangeable state > iron-manganese oxidation state,and Cu mainly existed in an organic state. Various forms of Zn are arranged in order of the proportion as follows: iron-manganese oxidation state > residual state > carbonate bound state > exchangeable state > organic state,and Zn mainly existed in an iron-manganese oxidation state. After the treatment of sludge by low temperature plasma,the content of exchangeable Cu and Zn in the sludge increased,while the content and proportion of residual Cu and Zn all reduced.展开更多
基金supported by Natural Science Foundation of Chongqing Three Gorges University (12ZD14)Key Laboratory of Energy Thermal Conversion and Control of Ministry of Education, Southeast University
文摘A systematic study was carried out to investigate the promotion effect of manganese on the performance of a coprecipitated iron-manganese bimetallic catalyst for the light olefins synthesis from syngas. The catalyst samples were characterized by N2 physisorption, transmis- sion electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), powder X-ray diffraction (XRD), Mossbauer spectroscopy, H2- differential thermogravimetric analysis (H2-DTG), CO temperature-programmed reduction (CO-TPR) and CO2 temperature-programmed des- orption (CO2-TPD). The Fischer-Tropsch synthesis (FTS) performance of the catalyst was measured at 1.5 MPa, 250 ℃ and syngas with H2/CO ratio of 2.0. The characterization results indicated that the addition of manganese decreases the catalyst crystallite size, and improves the catalyst BET surface area and pore volume. The presence of manganese suppresses the catalyst reduction and carburization in H2, CO and syngas, respectively. The addition of manganese improves the catalytic activity of water-gas shift reaction and suppresses the oxidation of iron carbides in the FTS reaction. The incorporation of manganese improves the catalyst surface basicity and results in a significant improvement in the selectivities to light olefins and heavy hydrocarbons (C5+), and furthermore an inhibition of methane formation in FTS. The pure iron catalyst (Mn-00) has the highest initial FTS catalytic activity (65%) and the lowest selectivity (17.35 wt%) to light olefins (C2=-C4=). The addition of an appropriate amount of manganese can improve the catalyst FTS activity.
基金Supported by National Natural Science Foundation of China(Nos.50378004 and 50678007)Beijing Natural Science Foun-dation(No.8082009)+1 种基金Science & Technology Development Programme of Beijing Municipal Commission of Education (No.KM200610005025)Academic Human Resources Development in Institutions of Higher Learning Under the Jurisdiction of Beijing Municipality(No. 05004014200701).
文摘Iron-manganese composited oxide(FeMnO) was prepared with potassium permanganate and ferrous salt. Interface performance, charge property and structure topography of the FeMnO were investigated. Coagulation efficiency and pollution removal mechanism of the FeMnO were approached. Results show that the main compositions of the FeMnO are δ-manganese dioxide and ferric hydroxide. The specific surface area is about 146.22 m^2/g. The FeMnO contains rich hydroxyl with extremely strong adsorption action and chemical adsorption activity. The zero charge point of the oxide in pure water is about 8.0 of pH value. Under neutral pH value conditions, the FeMnO particle surface carried positive charges. The FeMnO particles are quasi-spherical micro-particles with irregular sizes adjoined each other to form net construction. Phosphorus removal efficiency of the FeMnO is remarkable, the total dissoluble phosphorus of settled water can be reduced below detecting level(0.3 μtg/L) at a FeMnO dosage of 6 mg/L, and total phosphorus below detecting level at a FeMnO dosage of 10 mg/L, for water samples containing total phos- phorus of 1281.70 μg/L and total dissoluble phosphorus of 1187.91 μtg/L. The mechanism of effective coagulation for phosphorus removal is combined results of multiple actions of adsorption, charge neutralization, adsorption/bridging and so on.
文摘A sort of purplish red iron-manganese nodules was found in the Middle Ordovician Guniutan-Miaopu period limestone, Anhui Province. About their formational environment, there are two different viewpoints:Yue thought they were deep-water pelagic deposit and Huang et al. believed they were formed inshallow water tide. We think that these nodules were formed in drowned platform margin belonging to atransitional type between shallow-water and deep-water iron-manganese nodules, and different from shoalwater iron-manganese oolites and pelagic iron-manganese nodules in feature and origin. 1 Palaeogeographic setting of iron-manganese nodules
基金the financial assistance from Indian Institute of Technology-Kharagpur(IIT-Kharagpur)。
文摘In recent years,iron(Fe)based degradable metal is explored as an alternative to permanent fracture fixation devices.In the present work,copper(Cu)is added in Fe-Mn system to enhance the degradation rate and antimicrobial properties.Fe-Mn-x Cu(x=0.9,5 and 10 wt.%)alloys are prepared by the meltingcasting-forging route.XRD analysis confirms austenite phase stabilization due to the presence of Mn and Cu.As predicted by Thermo-Calc calculations,Cu rich phase precipitations are noticed along the austenite grain boundaries.Degradation behaviours of Cu added Fe-Mn alloys are investigated through static immersion and electrochemical polarization where enhanced degradation is found for higher Cu added alloys.When challenged against E.Coli bacteria,the Fe-Mn-Cu alloy media extract shows a significant bactericidal effect compare to the base alloy.In vitro cytocompatibility studies,as determined using MG63 and MC3T3-E1 cell lines,indicate increased cell density as a function of time for all the alloys.When implanted in rabbit femur,the newly developed alloy does not show any kind of tissue necrosis around the implants.Better osteogenesis and higher new bone formation are observed with Fe-Mn-10 Cu alloy as evident from micro-computed tomography(μ-CT)and fluorochrome labelling.
基金Foundation item:the National Outstanding Young Scientists Foundation of China(20625620)the National Key Basic Research Program of China(973 Program,2007CB216401)+1 种基金the National Natural Science Foundation of China(20590360)the Natural Science Foundation of Shanxi Province(2006021014).
文摘The effects of Manganese (Mn) incorporation on a precipitated iron-based Fischer-Tropsch synthesis (FTS) catalyst were investigated using N2 physical adsorption, air differential thermal analysis (DTA), H2 temperature-programmed reduction (TPR), and Mǒssbauer spectroscopy. The FTS performances of the catalysts were tested in a slurry phase reactor. The characterization results indicated that Mn increased the surface area of the catalyst, and improved the dispersion of (α-Fe2O3 and reduced its crystallite size as a result of the high dispersion effect of Mn and the Fe-Mn interaction. The Fe-Mn interaction also suppressed the reduction of (α-Fe2O3 to Fe3O4, stabilized the FeO phase, and (or) decreased the carburization degree of the catalysts in the H2 and syngas reduction processes. In addition, incorporated Mn decreased the initial catalyst activity, but improved the catalyst stability because Mn restrained the reoxidation of iron carbides to Fe3O4, and improved further carburization of the catalysts. Manganese suppressed the formation of CH4 and increased the selectivity to light olefins (C2-4^=), but it had little effect on the selectivities to heavy (C5+) hydrocarbons. All these results indicated that the strong Fe-Mn interaction suppressed the chemisorptive effect of the Mn as an electronic promoter, to some extent, in the precipitated iron-manganese catalyst system.
基金Supported by International Science&Technology Cooperation Program of China(2015DFR70390)Science and Technology Platform and Base Construction Project of Chongqing City,China(cstc2014gjhz20001)Science and Technology Planning Project of Chongqing City,China(cstc2011pt-gc80019)
文摘Low temperature plasma was used to treat sludge,and the effects of discharge time on the content of different forms of heavy metals in the sludge were studied. The results showed that Cu and Zn content in the domestic sludge could basically meet the requirements of GB 4284-2018,GB/T 23486-2009,CJ/T 362-2011 and CJ/T 309-2009. There were big differences between different forms of the heavy metals. According to the proportions of different forms of Cu in the sludge,different forms of Cu are arranged as follows: organic state > carbonate bound state> residual state > exchangeable state > iron-manganese oxidation state,and Cu mainly existed in an organic state. Various forms of Zn are arranged in order of the proportion as follows: iron-manganese oxidation state > residual state > carbonate bound state > exchangeable state > organic state,and Zn mainly existed in an iron-manganese oxidation state. After the treatment of sludge by low temperature plasma,the content of exchangeable Cu and Zn in the sludge increased,while the content and proportion of residual Cu and Zn all reduced.