Study on the Antitumor Effects of Low-energy Laser Irradiation Combined with Cyclophosphamide

Systematic experiments about the antitumor effects of low energy laser irradiation combined with the traditional antitumor medicine of cyclophosphamide were conducted using the experimental model of mouse S180 ascites sarcoma.The three groups of tumor bearing mice were irradiated upon the inner corners with the dosages of 11 00,14 67 and 22 00 J·cm -2 LELI respectively,and injected with CYT intraperitoneally to observe the changes of the survival time,the ascites growth speed,and the kinetic changes of immune functions.The survival times of the three groups of CYT/LELI combination were obviously longer than those of the tumor and CYT control groups.Correspondingly,the amounts of ascites,tumor cells densities and total tumor cells in CYT/LELI groups decreased significantly,while the death ratio of the tumor cells increased.Comparatively,the group of 22 00 J·cm -2 LELI combined with CYT showed the most ideal antitumor effects,and the life prolongation ratio was up to 53 20%.

Effect of Low Energy Far-Infrared Irradiation on Facial Skin for Healthy People

Objective: Utilizing VISIA skin tester to quantitatively evaluate the effect of low energy far-infrared irradiation on healthy people’s facial skin. Methods: 60 volunteers were selected in hospital from September 2019 to June 2020, and the total score of face, skin spots, texture, wrinkles and pores were observed before and after low energy far-infrared irradiation treatment with VISIA skin tester. Results: After 2 weeks of low energy far-infrared irradiation treatment, the total skin score of volunteers increased significantly (P < 0.01). In the itemized statistics, the moisture value, stain value and wrinkle value increased significantly (P < 0.05). Conclusion: Low energy far-infrared irradiation can significantly improve the facial skin quality of healthy people.

Aligned Elongation of Ag Nanoparticles Embedded in Silica Irradiated with High Energy Ni Ions

Metallic nanoparticle （NP） shapes have a significant influence on the property of composite embedded with metallic NPs. Swift heavy ion irradiation is an effective way to modify shapes of metallic NPs embedded in an amorphous matrix. We investigate the shape deformation of Ag NPs with irradiation fluence, and 357 MeV Ni ions are used to irradiate the silica containing Ag NPs, which are prepared by ion implantation and vacuum annealing. The UV-vis results show that the surface plasmon resonance （SPR） peak from Ag NPs shifts from 400 to 377nm. The SPR peak has a significant shift at fluence lower than 1 × 10^14 ions/cm2 and shows less shift at fluence higher than 1 × 10^14 ions/cm2. The TEM results reveal that the shapes of Ag NPs also show significant deformation at fluence lower than 1 × 10^14 ions/cm2 and show less deformation at fluence higher than 1 × 10^14 ions/cm2. The blue shift of the SPR peak is considered to be the consequence of defect production and Ag NP shape deformation, Based on the thermal spike model calculation, the temperature of the silica surrounding Ag particles first increases rapidly, then the region of Ag NPs close to the interface of Ag/silica is gradually heated. Therefore, the driven force of Ag NPs deformation is considered as the volume expansion of the first heated silica layer surrounding Ag NPs.

Microstructure evolution of T91 steel after heavy ion irradiation at 550℃

Fe-Cr ferritic/martensitic(F/M)steels have been proposed as one of the candidate materials for the Generation IV nuclear technologies.In this study,a widely-used ferritic/martensitic steel,T91 steel,was irradiated by 196-MeV Kr^(+)ions at 550℃.To reveal the irradiation mechanism,the microstructure evolution of irradiated T91 steel was studied in details by transmission electron microscope(TEM).With increasing dose,the defects gradually changed from black dots to dislocation loops,and further to form dislocation walls near grain boundaries due to the production of a large number of dislocations.When many dislocation loops of primary a0/2<111>type with high migration interacted with other defects or carbon atoms,it led to the production of dislocation segments and other dislocation loops of a0<100>type.Lots of defects accumulated near grain boundaries in the irradiated area,especially in the high-dose area.The grain boundaries of martensite laths acted as important sinks of irradiation defects in T91.Elevated temperature facilitated the migration of defects,leading to the accumulation of defects near the grain boundaries of martensite laths.

Non-ionizing energy loss calculations for modeling electron-induced degradation of Cu(In,Ga)Se_2 thin-film solar cells

The lowest energies which make Cu,In,Ga,and Se atoms composing Cu（In,Ga）Se_2（CIGS） material displaced from their lattice sites are evaluated,respectively.The non-ionizing energy loss（NIEL） for electron in CIGS material is calculated analytically using the Mott differential cross section.The relation of the introduction rate（k） of the recombination centers to NIEL is modified,then the values of k at different electron energies are calculated.Degradation modeling of CIGS thin-film solar cells irradiated with various-energy electrons is performed according to the characterization of solar cells and the recombination centers.The validity of the modeling approach is verified by comparison with the experimental data.

PVA/PEG Hybrid Hydrogels Prepared by Freeze-thawing and High Energy Electron Beam Irradiation

In this paper, poly（vinyl alcohol）（PVA） and PVA/poly（ethylene glycol）（PEG） hybrid hydrogels were synthesized by freeze-thawing or freeze-thawing followed by high energy electron beam irradiation. The influence of PEG molecular weight, mass ratios of PVA to PEG, thawing temperature and number of freeze-thawing（FT） cycles on the mechanical strength of PVA/PEG hydrogel was investigated. Also, the thermal behaviors were examined by differential scanning calorimetry（DSC） and the microstructttres were observed with scanning electron microscopy（SEM）. The results suggest that the addition of PEG improves the mechanical strength of PVA hydrogel and the irradiation reduces both the strength of PVA/PEG hydrogel slightly and the degree of crystallinity. The improved properties suggest that PVA/PEG hydrogel can be a good candidate for the application in the biomedical.

Enhancement of hydroxyapatite dissolution through structure modification by Krypton ion irradiation

Hydroxyapatite(HA)synthesized by a wet chemical route was subjected to heavy ion irradiation,using4 Me V Krypton ion(Kr17+)with ion fluence ranging from 1×1013 to 1×1015 ions/cm2.Glancing incidence X-ray diffraction(GIXRD)results confirmed the phase purity of irradiated HA with a moderate contraction in lattice parameters,and further indicated the irradiation-induced structural disorder,evidenced by broadening of the diffraction peaks.High-resolution transmission electron microscopy(HRTEM)observations indicated that the applied Kr irradiation induced significant damage in the hydroxyapatite lattice.Specifically,cavities were observed with their diameter and density varying with the irradiation fluences,while a radiation-induced crystalline-to-amorphous transition with increasing ion dose was identified.Raman and X-ray photoelectron spectroscopy(XPS)analysis further indicated the presence of irradiationinduced defects.Ion release from pristine and irradiated materials following immersion in Tris(p H 7.4,37?)buffer showed that dissolution in vitro was enhanced by irradiation,reaching a peak at 0.1 dpa.We examined the effects of irradiation on the early stages of the mouse osteoblast-like cells(MC3 T3-E)response.A cell counting kit-8 assay(CCK-8 test)was carried out to investigate the cytotoxicity of samples,and viable cells can be observed on the irradiated materials.

The effects of ultrasound frequency and power on the activation energy in Si-KOH reaction system

The activation energy is the minimum amount of energy required to initiate a reaction. It is one of the important indexes for appraising a reaction. The chemical reaction rate is closely related to the value of activation energy, and reducing activation energy is propitious to promoting a chemical reaction. In the present paper, the relationship between the activation energy in Si-KOH reaction system and the ultrasound frequency and power has been discussed for the first time. The range of ultrasound frequency and power is 40-100kHz （interval by 20kHz） and 10-50W （interval by 10W）, respectively. The experimental clata indicate that the activation energy decreases with the increasing ultrasound power. Comparing with the activation energy without ultrasound irradiation, the results in our paper indicate that ultrasound irradiation could reduce the activation energy in Si-KOH reaction system and increase the reaction rate.