Zeta potential is one of the most relevant parameters controlling the rheological behavior of ceramic suspensions. In this work, it was observed that for pH values below the isoelectric point (IEP), the positive value...Zeta potential is one of the most relevant parameters controlling the rheological behavior of ceramic suspensions. In this work, it was observed that for pH values below the isoelectric point (IEP), the positive value of zeta potential of water suspensions of α-quartz and α-cristobalite, experiences a sudden steep increase with the increase in specific surface area of the powders. For pH values above the IEP, the zeta potential values of crystalline forms of silica (α-quartz and α-cristobalite), get gradually more negative with the increase in pH. Conversely in the case of vitreous silica, for pH values above 6, there occurs a steep change towards more negative values of zeta potential than those presented by quartz and cristobalite. These findings have not yet been accounted for in the DLVO theory but may provide subsidies for better understanding of how to stabilize and destabilize crystalline and vitreous silica water suspensions.展开更多
ZrCoSb based half-Heusler(HH)alloys have been widely studied as a p-type thermoelectric(TE)material for power generation applications in the mid-temperature regime.However,their intrinsically high thermal conductivity...ZrCoSb based half-Heusler(HH)alloys have been widely studied as a p-type thermoelectric(TE)material for power generation applications in the mid-temperature regime.However,their intrinsically high thermal conductivity has been found to be detrimental for the improvement in their thermoelectric figure-of-merit(ZT),which presently is far below unity.In the current work,a state-of-the-art ZT~1.1 at 873 K was realized in an optimized composition of nanostructured Zr1-xHfxCoSb_(0.9)Sn_(0.1) HH alloys by employing compositional modulation i.e.grain-by-grain compositional variations,which leads to a substantial increase in its power factor coupled with a concurrent decrease in its thermal conductivity.Significant reduction in the phonon mean-free-path is observed on Hf substitution,which is comparable to the average crystallite size(~25 nm),thus leading to a very low thermal conductivity of~2.2Wm^(-1)K^(-1) at 873 K,which is amongst the lowest reported in HH alloys.The TE device characteristics,estimated using cumulative temperature dependence model for quantitative evaluation of TE performance,yielded an output power density of~10 Wcm2 with a leg efficiency of~10%in the optimized composition of nanostructured Zr_(1-x)Hf_(x)CoSb_(0.9)Sn_(0.1) HH alloys,which is comparable to the reported efficiencies of other state-of-the-art TE materials.展开更多
基金FAPESP process number 98/14324-0 Capes Agency,process number 33001014004P9.
文摘Zeta potential is one of the most relevant parameters controlling the rheological behavior of ceramic suspensions. In this work, it was observed that for pH values below the isoelectric point (IEP), the positive value of zeta potential of water suspensions of α-quartz and α-cristobalite, experiences a sudden steep increase with the increase in specific surface area of the powders. For pH values above the IEP, the zeta potential values of crystalline forms of silica (α-quartz and α-cristobalite), get gradually more negative with the increase in pH. Conversely in the case of vitreous silica, for pH values above 6, there occurs a steep change towards more negative values of zeta potential than those presented by quartz and cristobalite. These findings have not yet been accounted for in the DLVO theory but may provide subsidies for better understanding of how to stabilize and destabilize crystalline and vitreous silica water suspensions.
基金the Board of Research in Nuclear Sciences,India for the financial support under the Scheme:37(3)/14/22/2016-BRNS with BSC.Nagendra S.Chauhan acknowledges CSIR-Senior Research Fellowship.(Grant No:31/001(0430)/2014-EMR-1)The technical support rendered by Dr.Vidya Nand Singh,Mr.Radhey Shyam,and Mr.Naval Kishor Upadhyay is also gratefully acknowledged.
文摘ZrCoSb based half-Heusler(HH)alloys have been widely studied as a p-type thermoelectric(TE)material for power generation applications in the mid-temperature regime.However,their intrinsically high thermal conductivity has been found to be detrimental for the improvement in their thermoelectric figure-of-merit(ZT),which presently is far below unity.In the current work,a state-of-the-art ZT~1.1 at 873 K was realized in an optimized composition of nanostructured Zr1-xHfxCoSb_(0.9)Sn_(0.1) HH alloys by employing compositional modulation i.e.grain-by-grain compositional variations,which leads to a substantial increase in its power factor coupled with a concurrent decrease in its thermal conductivity.Significant reduction in the phonon mean-free-path is observed on Hf substitution,which is comparable to the average crystallite size(~25 nm),thus leading to a very low thermal conductivity of~2.2Wm^(-1)K^(-1) at 873 K,which is amongst the lowest reported in HH alloys.The TE device characteristics,estimated using cumulative temperature dependence model for quantitative evaluation of TE performance,yielded an output power density of~10 Wcm2 with a leg efficiency of~10%in the optimized composition of nanostructured Zr_(1-x)Hf_(x)CoSb_(0.9)Sn_(0.1) HH alloys,which is comparable to the reported efficiencies of other state-of-the-art TE materials.
