Another SSOR Iteration Method

Kellogg gave a version of the Peaceman-Radford method. In this paper, we introduce a SSOR iteration method which uses Kellogg’s method. The new algorithm has some advantages over the traditional SSOR algorithm. A Cyclic Reduction algorithm is introduced via a decoupling in Kellogg’s method.

Variational Iteration Method for Solving Time Fractional Burgers Equation Using Maple

The Time Fractional Burger equation was solved in this study using the Mabel software and the Variational Iteration approach. where a number of instances of the Time Fractional Burger Equation were handled using this technique. Tables and images were used to present the collected numerical results. The difference between the exact and numerical solutions demonstrates the effectiveness of the Mabel program’s solution, as well as the accuracy and closeness of the results this method produced. It also demonstrates the Mabel program’s ability to quickly and effectively produce the numerical solution.

Calculation of Combustion Products by the New Iteration Method of Non-linear Equations

For a specific combustion problem involving calculations of several species at the equilibrium state, it is simpler to write a general computer program and calculate the combustion concentration. Original work describes, an adaptation of Newton-Raphson method was used for solving the highly nonlinear system of equations describing the formation of equilibrium products in reacting of fuel-additive-air mixtures. This study also shows what possible of the results. In this paper, to be present the efficient numerical algorithms for. solving the combustion problem, to be used nonlinear equations based on the iteration method and high order of the Taylor series. The modified Adomian decomposition method was applied to construct the numerical algorithms. Some numerical illustrations are given to show the efficiency of algorithms. Comparisons of results by the new Matlab routines and previous routines, the result data indicate that the new Matlab routines are reliable, typical deviations from previous results are less than 0.05%.

Doubly Periodic Wave Solutions of Jaulent-Miodek Equations Using Variational Iteration Method Combined with Jacobian-function Method

One of the advantages of the variational iteration method is the free choice of initial guess. In this paper we use the basic idea of the Jacobian-function method to construct a generalized trial function with some unknown parameters. The Jaulent-Miodek equations are used to illustrate effectiveness and convenience of this method, some new explicit exact travelling wave solutions have been obtained, which include bell-type soliton solution, kink-type soliton solutions, solitary wave solutions, and doubly periodic wave solutions.

IMPROVED HOMOTOPY ITERATION METHOD AND APPLIED TO THE NINE-POINT PATH SYNTHESIS PROBLEM FOR FOUR-BAR LINKAGES

A new algorithm called homotopy iteration method based on the homotopy function is studied and improved. By the improved homotopy iteration method, Polynomial systems with high Order and deficient can be solved fast and efficiently comparing to the original homotopy iteration method. Numerical examples for the ninepoint path synthesis of four-bar linkages show the advantages and efficiency of the improved homotopy iteration method.

Multilevel Iteration Methods for Solving Linear Operator Equations of the First Kind

In this paper we develop two multilevel iteration methods for solving linear systems resulting from the Galerkin method and Tikhonov regularization for linear ill-posed problems. The two algorithms and their convergence analyses are presented in an abstract framework.

Solutions of the Duffin-Kemmer-Petiau equation in the presence of Hulthn potential in(1+2) dimensions for unity spin particles using the asymptotic iteration method

The relativistic Duffin-Kemmer-Petiau equation in the presence of Hulthen potential in （1 ＋2） dimensions for spin-one particles is studied. Hence, the asymptotic iteration method is used for obtaining energy eigenvalues and eigenfunctions.

Energy Spectrum for a Short-Range 1/r Singular Potential with a Non-Orbital Barrier Using the Asymptotic Iteration Method

Using the asymptotic iteration method, we obtain the S-wave solution for a short-range three-parameter central potential with 1/r singularity and with a non-orbital barrier. To the best of our knowledge, this is the first attempt at calculating the energy spectrum for this potential, which was introduced by H. Bahlouli and A. D. Alhaidari and for which they obtained the “potential parameter spectrum”. Our results are also independently verified using a direct method of diagonalizing the Hamiltonian matrix in the J-matrix basis.

Research on Effect of Oil Film Inertia on Piston Skirt by Iteration Method

The influence of oil film inertia on piston skirt lubrication in a high speedengine is investigated by an iteration method that alternately solves the Navier-Stocks equationsand the Reynolds equa-tion by finite element method and difference method. The Reynolds lubricationequation including oil film inertia is developed, in which the inertia coefficient is introduced toinvestigate the effect of oil film inertia. The iteration procedure and finite formulation ofsolving the new Reynolds lubrication equation are given to analyze the effect of oil film on pistonskirt in this kind of engine. The calculation results show that the oil film inertia has someeffects on the friction force, pressure force and load capacity of oil film and its effect isobvious for the last. The Reynolds lubrication equation proposed can be also used to analyze thelubrication performance of the piston skirt in low or medium speed engine and some other lubricationproblems generally excluding oil film inertia with the inertia coefficient being set at zero.

HIERARCHICAL ITERATION METHOD TO SOLVE DYNAMIC DIFFERENTIAL EQUATION

The dynamic differential equation of a multibody System can be presented inthe form of Aq= B. Calculating the inverse of matrix A is a simple way to solve this kindof differential equatbo. Matrix A will be in the ill condition if the system is configured asa main they with small mass appendages. A hierarchical iteration method is given in thispaper to avoid the problem of the inverse of an ill condition matrix calculatbo. It is pont-ed out that the stability of the system input and output is the suffcient condition of itera-tion convergence. The method omits a series formula expanding step. It is also useful toreduce the immuence of the stiff problem. The calculation progress i8 modular and structural.

Application of asymptotic iteration method to a deformed well problem

The asymptotic iteration method （AIM） is used to obtain the quasi-exact solutions of the Schr6dinger equation with a deformed well potential. For arbitrary potential parameters, a numerical aspect of AIM is also applied to obtain highly accurate energy eigenvalues. Additionally, the perturbation expansion, based on the AIM approach, is utilized to obtain simple analytic expressions for the energy eigenvalues.

Variational iteration method for solving compressible Euler equations

This paper applies the variational iteration method to obtain approximate analytic solutions of compressible Euler equations in gas dynamics. This method is based on the use of Lagrange multiplier for identification of optimal values of parameters in a functional. Using this method, a rapid convergent sequence is produced which converges to the exact solutions of the problem. Numerical results and comparison with other two numerical solutions verify that this method is very convenient and efficient.

Variational iteration method for solving time-fractional diffusion equations in porous the medium

The variational iteration method is successfully extended to the case of solving fractional differential equations, and the Lagrange multiplier of the method is identified in a more accurate way. Some diffusion models with fractional derivatives are investigated analytically, and the results show the efficiency of the new Lagrange multiplier for fractional differential equations of arbitrary order.

ANCIENT CHINESE ALGORITHM: THE YING BUZU SHU (METHOD OF SURPLUS AND DEFICIENCY)VS NEWTON ITERATION METHOD

Air exploratory discussion of an ancient Chinese algorithm, the Ying Buzu Shu, in about 2nd century BC, known as the rule of double false position in the West is given. In addition to pointing out that the rule of double false position is actually a translation version of the ancient Chinese algorithm, a comparison with well-known Newton iteration method is also made. If derivative is introduced, the ancient Chinese algorithm reduces to the Newton method. A modification of the ancient Chinese algorithm is also proposed, and some of applications to nonlinear oscillators are illustrated.

Modified variational iteration method for an El Nio Southern Oscillation delayed oscillator

This paper studies a delayed air-sea coupled oscillator describing the physical mechanism of El Nino Southern Oscillation. The approximate expansions of the delayed differential equation＇s solution are obtained successfully by the modified variational iteration method. The numerical results illustrate the effectiveness and correctness of the method by comparing with the exact solution of the reduced model.

Asymptotic Iteration Method for Energies of Inversely Linear Potential with Spatially Dependent Mass

The bound-state solution of the position dependent mass Klein-Gordon equation including inversely linear potential is obtained within the framework of the asymptotic iteration method. The relation between the scalar and vector potentials is considered to S（x） = V（x）（β - 1）. In particular, it is shown that the corresponding method exactly reproduces the spectrum of linearly inversely potentials with spatially dependent mass.

Hydrodynamic Lubrication of Elastic Foil Gas Bearing Using Over Relaxation Iteration Method and Non-Dimensional Equation

The purpose is to accurately predict the performance of foil bearing and achieve accurate results in the design of foil bearing structure.A new type of foil bearing with surface microstructure is used as experimental material.First,the lubrication mechanism of elastic foil gas bearing is analyzed.Then,the numerical solution process of the static bearing capacity and friction torque is analyzed,including the discretization of the governing equation of rarefied gas pressure based on the non-dimensional modified Reynolds equation and the over relaxation iteration method,the grid planning within the calculation range,the static solution of boundary parameters and static solution of the numerical process.Finally,the solution program is analyzed.The experimental data in National Aeronautics and Space Administration(NASA)public literature are compared with the simulation results of this exploration,so as to judge the accuracy of the calculation process.The results show that under the same static load,the difference between the minimum film thickness calculated and the test results is not obvious;when the rotor speed of the bearing is 60000 r/min,the influence of the boundary slip effect increases with the increase of the micro groove depth on the flat foil surface;when the eccentricity or the micro groove depth of the bearing increases,the bearing capacity will be strengthened.When the eccentricity is 6µm and 14µm,the viscous friction torque of the new foil bearing increases significantly with the increase of the depth of the foil micro groove,but when the eccentricity is 22µm,the viscous friction torque does not change with the change of the depth of the foil micro groove.It shows that the bearing capacity and performance of foil bearing are improved.

A New Kind of Iteration Method for Finding Approximate Periodic Solutions to Ordinary Diferential Equations

In this paper, a new kind of iteration technique for solving nonlinear ordinary differential equations is described and used to give approximate periodic solutions for some well-known nonlinear problems. The most interesting features of the proposed methods are its extreme simplicity and concise forms of iteration formula for a wide range of nonlinear problems.

Variational Iteration Method for Solving Boussinesq Equations Using Maple

In this study, we applied the variational iteration method to solve the Boussinesq time equation. Bossiness’s article from 1872 introduced the equations that are now known as the Boussinesq equations. Numerical methods are commonly utilized to solve nonlinear equation systems. Several research papers have documented the values of the variational iteration method and its applications for various categories of differential equations. A comparison of the exact and numerical solutions was obtained using the variational iteration method. The variational iteration method shows that the proposed method is very effective and convenient. The results are shown for different specific cases of the problem. The variational iteration method is useful in numerical simulations and approximate analytical solutions, and it is used to resolve nonlinear differential equations in various situations using Maple. For example, the linear Boussinesq equation was resolved using the variational iteration method. By comparing the numerical results, we found that the variable repetition method produced accurate results and was close to the exact solution, allowing it to be widely applied to the Boussinesq equation. This proves the effectiveness of the method and the capability to quickly and effectively obtain the numerical number solution related to the exact solution using the Maple 18 program. Additionally, the outcomes are extremely precise.

Time Discretized Variational Iteration Method for the Stochastic Volatility Process with Jumps

A model for both stochastic jumps and volatility for equity returns in the area of option pricing is the stochastic volatility process with jumps (SVPJ). A major advantage of this model lies in the area of mean reversion and volatility clustering between returns and volatility with uphill movements in price asserts. Thus, in this article, we propose to solve the SVPJ model numerically through a discretized variational iteration method (DVIM) to obtain sample paths for the state variable and variance process at various timesteps and replications in order to estimate the expected jump times at various iterates resulting from executing the DVIM as n increases. These jumps help in estimating the degree of randomness in the financial market. It was observed that the average computed expected jump times for the state variable and variance process is moderated by the parameters (variance process through mean reversion), Θ (long-run mean of the variance process), σ (volatility variance process) and λ (constant intensity of the Poisson process) at each iterate. For instance, when = 0.0, Θ = 0.0, σ = 0.0 and λ = 1.0, the state variable cluttered maximally compared to the variance process with less volatility cluttering with an average computed expected jump times of 52.40607869 as n increases in the DVIM scheme. Similarly, when = 3.99, Θ = 0.014, σ = 0.27 and λ = 0.11, the stochastic jumps for the state variable are less cluttered compared to the variance process with maximum volatility cluttering as n increases in the DVIM scheme. In terms of option pricing, the value 52.40607869 suggest a better bargain compared to the value 20.40344029 due to the fact that it yields less volatility rate. MAPLE 18 software was used for all computations in this research.