Genetic Diversity of Jute Mallow (Corchorus spp.) Accessions Based on ISSR Markers

Jute mallow is a nutritious leafy vegetable. The leaves are rich in proteins, vitamins and essential amino acids. Molecular characterization of Jute mallow with focus on improvement of leaf yield is scarcely reported. In the present study, inter sequence simple repeats (ISSR) molecular markers were employed to assess genetic diversity and relationships of 83 accessions of Jute mallow from different parts of Africa and Asia conserved at the World Vegetable Center East and Southern Africa. A total of 89 bands were amplified by 8 ISSR primers. Number of polymorphic bands per primer ranged from 2 to 6 with an average of 2.75 bands per primer. Polymorphic information content (PIC) values ranged from 0.390 to 0.760 with average of 0.53. Average Nei’s gene diversity (h) and Shannon’s information index (I) were 0.335 and 0.494 respectively. The highest pairwise genetic distance was 0.431 observed in a population from East Africa accessions. PC1 and PC2 axis explained 21.69% and 11.66% of the total variation respectively. UPGMA cluster analysis grouped the accessions into six main clusters at genetic similarity coefficient of 0.53 as standard value for classification. These results have important implications for jute mallow breeding and conservation.

Overview of Jute Fibre as Thermoplastic Matrix Polymer Reinforcement

Recent decades have seen a substantial increase in interest in research on natural fibres that is aligned with sustainable development goals(SDGs).Due to their renewable resources and biodegradability,natural fiberreinforced composites have been investigated as a sustainable alternative to synthetic materials to reduce the usage of hazardous waste and environmental pollution.Among the natural fibre,jute fibre obtained from a bast plant has an increasing trend in the application,especially as a reinforcement material.Numerous research works have been performed on jute fibre with regard to reinforced thermoset and thermoplastic composites.Nevertheless,current demands on sustainable materials have required new developments in thermoplastic composites.In this paper,the author reviews jute plants as reinforcement materials for thermoplastic matrix polymers.This review provides an overview of the sustainability of jute plants as reinforcement material for thermoplastic matrix polymers.The overview on jute based thermoplastic composites focused on the thermal behavior and mechanical properties.Apart from physical,chemical,and mechanical properties,the study also covers the current and perspectives for future research challenges faced by the researchers on jute fibre reinforced thermoplastic composites.

Weak Expansive Soil Physical Properties Modification by Means of a Cement-Jute Fiber

Sixteen groups of comprehensive tests have been conducted to investigate the modifications in the physical properties of a weak expansive soil due to the addition of a cement jute fiber.The tests have been conducted to analyze the liquid plastic limit,the particle distribution and the free expansion rate.The results show that:(1)With an increase in the cement-jute fiber content,the free expansion rate of the modified expansive soil gradually decreases,however,such a rate rebounds when the fiber content exceeds 0.5%and the cement content exceeds 6%.(2)With an increase in the cement percentage,the particle unevenness coefficient(Cu)and curvature coefficient(Cc)of the modified expansive soil tend to grow gradually.The Cc coefficient reaches 1.0 when the cement content is 6%.The unevenness coefficient of 16 soil samples is greater than 5.0,however,the Cu coefficient decreases when the cement content reaches 6%.(3)The plastic limit of soil increases as the cement content is made higher,while the liquid limit and plastic index decrease gradually.When the content of the modified material is 2%+0.1%~2%+0.7%(Cement content+jute fiber content),the change of particle size distribution is most obvious.(4)When the contents of cement and jute fiber are is 6%and 0.5%,respectively,the modification induced in the physical properties of soil samples corresponds to the best case.

Genetic diversity and DNA fingerprinting in jute(Corchorus spp.) based on SSR markers

Genetic diversity analysis and DNA finger printing are very useful in breeding programs,seed conservation and management. Jute(Corchorus spp.) is the second most important natural fiber crop after cotton. DNA fingerprinting studies in jute using SSR markers are limited. In this study, 58 jute accessions, including two control varieties(Huangma 179 and Kuanyechangguo) from the official variety registry in China were evaluated with 28 pairs of SSR primers. A total of 184 polymorphic loci were identified. Each primer detected 3 to 15 polymorphic loci, with an average of 6.6. The 58 jute accessions were DNA-fingerprinted with 67 SSR markers from the 28 primer pairs. These markers differentiated the 58 jute accessions from one another, with Co SSR305-120 and Co SSR174-195 differentiating Huangma 179 and Kuanyechangguo, respectively. NTSYS-pc2.10 software was used to analyze the genetic diversity in the 58 jute accessions. Their genetic similarity coefficients ranged from 0.520 to 0.910 with an average of 0.749, indicating relatively great genetic diversity among them. The 58 jute accessions were divided into four groups with the coefficient 0.710 used as a value for classification, consistent with their species and pedigrees. All these results may be useful both for protection of intellectual property rights of jute accessions and for jute improvement.

Development of a set of SSR markers for genetic polymorphism detection and interspecific hybrid jute breeding

Corchorus capsularis(white jute) and C. olitorius(dark jute) are the two principal cultivated spedes of jute that produce natural bast fiber of commercial importance. We have identified 4509 simple sequence repeat(SSR) loci from 34,163 unigene sequences of C. capsularis to develop a non-redundant set of 2079 flanking primer pairs. Among the SSRs, trinudeotide repeats were most frequent(60%) followed by dinucleotide repeats(37.6%). Annotation of the SSR-containing unigenes revealed their putative functions in various biological and molecular processes, including responses to biotic and abiotic signals. Eighteen expressed gene-derived SSR(eSSR) markers were successfully mapped to the existing single-nucleotide polymorphism(SNP) linkage map of jute,providing additional anchor points. Amplification of 72% of the 74 randomly selected primer pairs was successful in a panel of 24 jute accessions, comprising five and twelve accessions of C.capsularis and C. olitorius, respectively, and seven wild jute spedes. Forty-three primer pairs produced an average of 2.7 alleles and 58.1% polymorphism in a panel of 24 jute accessions. The mean PIC value was 0.34 but some markers showed PIC values higher than 0.5, suggesting that these markers can efficiently measure genetic diversity and serve for mapping of quantitative trait loci(QTLs) in jute. A primer polymorphism survey with parents of a wide-hybridized population between a cultivated jute and its wild relative revealed their efficacy for interspecific hybrid identificatioii. For ready accessibility of jute eSSR primers, we compiled all information in a user-friendly web database, JuteMarkerdb(http://jutemarkerdb.icar.gov.in/) for the first time in jute.This eSSR resource in jute is expected to be of use in characterization of germplasm, interspecific hybrid and variety identification, and marker-assisted breeding of superior-quality jute.

Plasma Treatment of Natural Jute Fibre by RIE 80 plus Plasma Tool

Plasma treatment can be used to modify the structure of natural fibre like jute for a variety of applications. Environmentally friendly jute fibre was treated with argon and oxygen plasma. The treated samples were characterized by X-ray diffraction （XRD）, Fourier transform infrared spectroscopy （FTIR） and optical microscope. The macromolecular and microstructural changes in cellulose confirmed the change by plasma treatment. The XRD results confirmed that the crystal size and the crystallinity of the plasma treated fibre increased. Argon plasma treated fibre had a smooth and compact surface, compared to oxygen plasma treated fibre. The maximum stain （i.e. stress） concentrated in the oxygen plasma treated fibre. Optical micrographs showed the oxygen plasma treated fibre tended to rupture due to higher strain （i.e., stress） compared to fibre with argon plasma treatment. FTIR results also provided the evidence of change in the chemical constituents with plasma treatment.

Mechanical, Thermal and Interfacial Properties of Jute Fabric-Reinforced Polypropylene Composites: Effect of Potassium Dichromate

Composites based on jute fabrics and polypropylene was fabricated by heat-press molding technique. The mechanical properties of the composites such as tensile strength, tensile modulus, bending strength, bending modulus and impact strength were measured in dependence of fiber contents. In order to improve fiber-matrix interaction, jute fabrics were treated with aqueous solutions of K2Cr2O7 (0.005-0.05% w/v). Composite prepared with 0.02% K2Cr2O7 treated jute fabrics showed the highest values of the mechanical properties. Thermogravimetric (TG/DTG) data of PP, jute fabrics and composites showed that thermal degradation temperatures of composites shifted to higher temperature regions compared to PP or jute fabrics. Treatment of jute fabrics improved the thermal stability of the composite considerably. Scanning electron microscopic images of tensile fractured sides of untreated and treated composites illustrated that better fiber-matrix interfacial interaction occurred in treated composite. The relative tendency of water absorption of both untreated and treated composites was also explored.

Effects of jute fibre content on the mechanical and dynamic mechanical properties of the composites in structural applications

Due to notable characteristics,sustainability concept and environmental issues,hybridisation natural with synthetic fibres to fabricate composites have been rapidly gaining market share in different applications(structural,military,aerospace and automotive vehicles).Compression,tension and fatigue tests of various stacking sequences of plain jute/carbon reinforced(PVB)polyvinyl butyral by hot hydraulic press technique were experimentally conducted.Six types of fabricated composites with various constituents(jute,carbon and their hybrids)were fabricated and tested.Notably,fatigue lifetime of hybrids increases with increasing the carbon content relative to the jute fibre content.On the other hand,Jute composites possess high strain compared to pure carbon composite,which gives an overall improvement in mechanical behaviours.Interestingly,H1 hybrid with Carbon/Jute/Carbon sequences offers similar fatigue stiffness behaviour of H3 hybrid with Carbon/Jute/Carbon/Jute sequences when subjected to cyclic loading.Carbon composite(C)exhibited the highest fatigue resistance,whiles jute composite(J)possessed the highest strain and semi brittle trends in both mechanical and fatigue performance.Results concluded that plain jute fibres could partially replace high-cost synthetic carbon fibres to produce more eco-friendly hybrids to be utilised in different composites industries.

An experimental study on ballistic impact response of jute reinforced polyethylene glycol and nano silica based shear thickening fluid composite

The present study aims at assessing the ballistic impact behaviour of jute reinforced polyethylene glycol(PEG)and nano silica based shear thickening fluid(STF).Preparation of STF is achieved by dispersing the nano silica particles at different weight percentage loadings of 10%,20%,30%and 40%in PEG and the effect of various weight percentages loading of nano silica particles on ballistic performance of the proposed composites is studied experimentally.Rheological studies of the prepared STF’s showed that at all nanosilica loading shear thickening occurred and also the shear thickening was highest at higher loading of nano silica at lower rate of shear.The study reveals that the ballistic performance of the jute fabric is enhanced with impregnation of STF.The ballistic results indicate that energy absorption of the proposed composites is enhanced with increased loading of nano silica particles and at the same time,the effect of STF was reduced.Specific energy absorption(SEA)of the neat fabric and the proposed composites was made use of for the purpose of comparing the energy absorption capabilities.It is found that the SEA of proposed composites with 10%nano silica loading is lesser than the neat fabric both in case of 3 layers and 6 layers.It was also found that proposed composite with 40%nano silica loading exhibits highest SEA compared to neat fabric and its counterparts with its SEA being 3.21 and 3.76 times highest compared to three and six layers of neat fabrics respectively.

Effect of Plant Extracts on Seed Borne Fungi of Jute

The aim of this study was to determine the prevalence of seed-borne fungal pathogens of jute and their control with plant extract. The experiment was carried out in seed pathology centre, Bangladesh Agricultural University to obtain relevant information about the health of jute seeds and find out the efficacy of extracts as seed-treater. Two varieties viz., Deshipat (Corchorus capsularis) and Tossapat (Corchorus olitorius) were selected for this study and jute seeds were collected from two different locations of Bangladesh. The major predominant identified fungi were Colletotrichum corchori, Macrophomina phaseolina, Fusarium spp., and Botryodiplodia theobromae. Least seed-borne fungi were found in the variety of Tossapat. Low germination of seeds was found related to high prevalence of seed-borne fungal infections. Highest seed-borne infection was obtained in the variety of Deshipat. In this study, we evaluated some major plant extracts such as garlic clove (Allium sativum), neem leaves (Azadirachta indica), allamanda leaves (Allamanda cathartica L.) and marigold leaves (Tagetes spp.) for observing the action of these plant extracts on seed borne fungi of Jute. The study revealed that the extract of Garlic (Allium sativum), and Biskatali (Polygonum hydropiper) increased the germination of seeds and garlic?(Allium sativum) extract was also found to be most effective in controlling the seed-borne infection among all the treatments. Although the inhibiting capacity of the extracts of Allamanda (Allamanda cathartica L.) and Biskatali (Polygonum hydropiper) was found to be similar and Biskatali extract was found to have the second position among all the treated plant extracts in inhibiting the growth of isolated fungal pathogens.

Influence of Polyester Resin Treatment on Jute Fabrics for Geotextile Applications

In this study, jute woven fabrics (1 × 1 plain, twill, zigzag and diamond weave) were manufactured from 100% raw jute yarn. The fabric specimens were treated by 5%, 10%, 15%, 20% and 25% unsaturated polyester resin where styrene monomer used as a solvent and 1% methyl ethyl ketone peroxide (MEKP) was used as initiator. Two bar pressure was applied for complete wetting of the fabric by a Padder and curing was done at 130?C for 10 minutes. The physico-mechanical characteristics of untreated and treated samples were examined and evaluated. It was revealed that moisture content (MC) and water absorbency of the treated specimens were decreased with the increase of resin percentage (%) in the fabrics. MC and water absorbency were maximum decreased up to 50.23% and 60.14% respectively by 25% resin treatment. On the other hand, bending length (BL), flexural rigidity (FR), flexural modulus (FM) and tensile strength (TS) were enhanced with the increase of resin percentage in the fabrics which resulted higher fabric stiffness. The maximum improvement of BL, FR, FM and TS were found to be 6.67%, 56.04%, 10.57% and 18.75% respectively in comparison to untreated sample. Soil degradation tests exhibited that 33.59% TS loss occurred for untreated specimens where only 8.04% loss of TS found for 25% resin treated one. Furthermore, jute based twill, zigzag and diamond fabrics were also treated by 10%, 15%, 20% and 25% resin, then measured their TS and compared with plain fabrics. It was revealed that plain fabrics have superior TS over other fabrics. It was also evident that TS enhanced for all the fabrics after resin treatment and maximum increase found for all the fabrics up to 25% resin treatment.

Enhancing mechanical behavior of micaceous soil with jute fibers and lime additives

Micaceous soils are common in many tropical countries and regions,and in some locations with moderate climate.The soils are spongy and unstable when loaded and are not considered suitable as construction material in earth structures.To resolve the issue,this work examined performance of micaceous soil reinforced with a combination of jute fibers,hydrated lime or slag-lime.A total of 28 sample sets were prepared at various dosages.Unconfined compression tests were conducted on the samples cured for 7 d and 28 d,respectively.The test results suggested that the unconfined compressive strength(UCS)and material stiffness were increased with the inclusion of up to 1%fiber and decreased if additional fibers were used.The ductility was improved consistently with up to 1.5%fiber content.The inclusions of fibers combined with hydrated lime or slag-lime further enhanced strength and stiffness of micaceous soil,and the improvement depended on the dosages used.For the dosages examined,jute fibers outweighed lime and slag in gaining ductility,and the optimal fiber content was 1%where strength and ductility were considered.

Heavy Metal Speciation and Health Risk Assessment of Soil and Jute Mallow (Corchorus Olitorus) Collected From a Farm Settlement in Ikorodu, Lagos, Nigeria

There is an increasing global concern for adverse effects of inorganic fertilizer and pesticides applied to agricultural soils. This study investigated metal speciation in soil and health risk assessment of Jute mallow (Corchorus olitoriuos) from a farm settlement in Ikorodu, Lagos State. Soil samples were collected according to the set standard procedure, sequentially extracted and analyzed for selected heavy metals using standard methods. Results showed that chromium (Cr) was associated with reducible fraction (Fe-Mn) for top soil, while cadmium (Cd), manganese (Mn), and copper (Cu);lead (Pb) and nickel (Ni);and Cr were predominantly bound to carbonate, reducible and residual mineral components respectively for sub-soil. The results of Contamination Factor (CF), Contamination Degree (CD), Pollution Load Index (PLI) and Geoaccumulation Index (Igeo) showed that the soil samples were not polluted for all the investigated metals. The Cd level in the soil (13.54 ± 1.21 mg·kg﹣1) and vegetables (0.83 ± 0.05 mg·kg﹣1) were above the USEPA critical permissible limit of 3.0 mg·kg﹣1 and 0.1 - 1.2 mg·kg﹣1 respectively. The daily intake of estimated selected heavy metals from the vegetable ranged from 8.8 × 10﹣03 to 1.4 × 10﹣02 for adult and 3.8 × 10﹣03 to 1.1 × 10﹣02 for children while the Hazard Quotient (HQ) for adults ranged from 5.4 × 10﹣05 to 1.1 × 10﹣01 and that of children ranged from 8.3 × 10﹣03 to 1.4 × 10﹣02. The cancer risk (CR) values of heavy metals in the soil ranged from 1.02 × 10﹣11 to 9.90

The Effect of Curative Concentration on Thermal and Mechanical Properties of Flexible Epoxy Coated Jute Fabric Reinforced Polyamide 6 Composites

Many researchers have shown interest in the reinforcement of commodity thermoplastic with natural fibers. However, the drawback of natural fibers is their low thermal processing temperatures, that border around 200℃. In this investigation, we tried to improve the thermal stability of natural fibers with the use of flexible epoxy surface coating that could facilitate processing with engineering thermoplastics. Jute fabric and Polyamide 6 (PA6) composites were prepared by compression molding. The thermal decomposition characteristics of the jute fabric were evaluated by using thermo gravimetric analysis (TGA). Mechanical analysis was conducted to evaluate tensile test and three point bending test of composite. It was found that thermal degradation resistance of jute fabric was improved by coating with flexible epoxy resin. Moreover, the flexural modulus improved with increasing curative concentration. The interfacial interaction between the epoxy and PA6 was clearly indicated by the photo micrographs of the polished cross sections of the coated and uncoated jute fabric/PA6 composites.

Effect of Fiber Loading on the Dynamic Mechanical Properties of Jute Fiber Reinforced Polypropylene Composites

Jute fiber (woven fabric, 1 × 1 plain weave) reinforced polypropylene matrix composites were prepared by compression molding with various fiber loading such as 30%, 40%, 46%, 50%, 55% by weight. The mechanical properties such as tensile strength (TS), bending strength (BS), tensile modulus (TM), bending modulus (BM) and impact strength (IS) of the composite were assessed and analyzed. The highest value of TS, BS, TM, BM and IS were 68.1 MPa, 94.1 MPa, 2936 MPa, 4831 MPa and 14.5 kJ/m2 respectively with 50% fiber loading by weight. It was found that the mechanical properties of the composites were increased with the increase in jute fiber content up to 50% by weight;however, further increase in fiber loading the value decreased. On the basis of fiber content, 50% fiber reinforced composites had the optimum set of mechanical properties. Initially the water absorption rate was higher and then it became slower and static with time. Chemical ageing test with various chemical media such as H2O2, NaOH, HCl and NaCl were performed up to 168 hours. After first 24 hours the composite samples showed gradual weight gain (%) and then the weight gain was become slow and steady in the chemical solution.

Production and Properties of Short Jute and Short E-Glass Fiber Reinforced Polypropylene-Based Composites

Short jute fiber (2 - 3 mm) reinforced polypropylene PP-based composites (20% fiber by weight) were fabricated using compression molding and the mechanical properties were evaluated. Tensile strength (TS), tensile modulus (TM), elongation at break (Eb%), flexural strength (FS), flexural modulus (FM), impact strength (IS), and hardness of the composites were found to be 32 MPa, 850 MPa, 12%, 38 MPa, 1685 MPa, 18 kJ/m2 and 96 shore-A, respectively. Then short E-glass fiber (2 - 3 mm) reinforced PP-based composites (20% fiber by weight) were fabricated and mechanical properties were compared with short jute-based composites. Short jute-based composites showed excellent mechanical properties and comparable to short E-glass-based composites. Soil degradation test of both types of composites indi-cated that jute/PP composites significantly lost much of its mechanical properties but E-glass/PP composites retained major portion of its original integrity. Interfaces of the degraded composites were investigated by scanning electron microscopy and supported the biodegradation properties of jute/PP composites.

Investigation of the Physical Properties of Jute Blended Yarn Using a Novel Approach in Spinning Process

This work reports the successful outcomes to process the polyester, acrylic and wool fiber along with jute fiber exclusively using existing jute processing machineries for manufacturing the 241 tex jute blended yarn. The blending was performed at feeding stage of breaker carding machine and blending ratio of jute and polyester/acrylic/wool fibers is 80:20. Manufacturing of jute blended yarns will create a new opportunity for extending the uses of jute fibers in value added jute products. The present work is concerned with the investigation of physical properties such as tenacity, elongation % at break, quality ratio, unevenness, imperfections (thick, thin & neps) and hairiness of manufactured jute blended yarns. The jute-polyester (80/20) blended yarn shows the higher strength and more evenness compared to jute-acrylic (80/20), jute-wool (80/20) blended and 100% jute yarn.

A Novel Approach of Dyeing Jute Fiber with Reactive Dye after Treating with Chitosan

Jute is generally not dyed with reactive dye though it is a cellulosic fiber. Reactive dye is extensively used to dye cotton, viscose and other cellulosic fibers whereas jute is dyed with basic dye. This paper presents a novel approach to dye the jute fiber with reactive dye after treating with chitosan. Jute fabric was treated with chitosan solution at different con- centrations (0.5%, 1%, 2%, 3% and 4%) and then dyed with reactive dye. The depth and fastness of shade of dyed fabric were analyzed by comparing the chitosan treated samples with untreated dyed fabric samples. It has been found that, the dyebath exhaustion is increased with the increment of chitosan concentrations. The exhaustion percentages have found 36.79%, 41.59%, 48.33%, 54.46% and 58.75% for the fabric treated with 0.5%, 1%, 2%, 3% and 4% chitosan solution respectively, while the exhaustion of dyebath is only 23.15% for untreated fabric. The K/S values (at λmax = 540 nm) of dyed samples have found 4.93, 6.77, 10.5, 14.07, 15.57 and 2.37 for 0.5%, 1%, 2%, 3%, 4% and untreated fabric respectively. The color fastness to washing and rubbing of the dyed fabrics was also evaluated. In case of dry rubbing, both types of fabric have shown almost similar fastness ratings. However, chitosan treated fabrics have shown inferior fastness rating in case of wet rubbing and washing, particularly for the fabrics at higher chitosan concentrations.

Geotechnical Characterization of Silty Clay Reinforcedwith Jute Cloth as Waster Product

Soil reinforcement is a recent and special field of soil improvement.It covers a range of techniques,which consists of placing inclusions in soil.The most conferences devoted partly or totally the behavior of foundation on reinforced subgrade without regarding the basic characteristics of the reinforced soil.So,the paper presents an experimental investigation into the mechanical and compressibility properties of the reinforced silty clay samples by jute cloth at intermediate depth.The effects of the reinforcement on shear stress and shear failure were studied;also,the presence of the reinforcement on behavior of consolidation process was distinctly described.The laboratory tests were supported by the finite element analysis to identify only the consolidation process and explained the effect of the reinforcement on the effective vertical stress and pore water pressure.The results indicated that the presence of such reinforcement has a considerable effect in increasing the shear strength of the reinforced samples and decreasing the compressibility especially decreasing the soil movement also,relieving both the effective and pore water pressure.

Studies on Mechanical Properties of Jute/E-Glass Fiber Reinforced Epoxy Hybrid Composites

Hybrid materials of any class are essential for current demands. This paper deals with the hybrid effect of composites made of jute/E-Glass fibers which are fabricated by hand layup method using LY556 Epoxy resin and HY951 hardener. The properties of this hybrid composite are determined by testing like tensile, flexural, impact, and inter laminar shear strength which are evaluated experimentally according to ASTM standards. The result of the test shows that hybrid composite of jute/ E-glass fiber has far better properties than that of jute fiber composite. However, it is found that the hybrid composite has better strength as compared to jute fiber composite fabricated separately with glass fiber.