The anti-overturning ability and structure safety of jack-up unit in in-place condition are often affected by environment loads, especially wind load. According to the MODU rule, the projected area method is used for ...The anti-overturning ability and structure safety of jack-up unit in in-place condition are often affected by environment loads, especially wind load. According to the MODU rule, the projected area method is used for calculating the wind load. However, the calculated results are conservative and not good for structure optimization design. In this paper, a 400 ft jack-up is studied as an example. Based on the wind tunnel test and numerical simulation method, some key points of wind load calculation, such as shielding effect, lift effect and shape coefficient of component, are discussed. The study shows that the points mentioned above, which are ignored in the MODU rule calculation, result in the conservative result.展开更多
The paper is focused on the structural problems related to the retrofitting of a ship structure into a maritime self-elevating platform. The study is referred on the design of the global and local strengthening of the...The paper is focused on the structural problems related to the retrofitting of a ship structure into a maritime self-elevating platform. The study is referred on the design of the global and local strengthening of the platform and legs structures. The joint structure built as the connection between the platform hull and the tubular legs, is designed so that to be acted by the special actuators. The total force provided by the actuators during the lifting operations is necessary to balance the total weight of the platform hull and operating equipment. The work described in the paper shows a methodology for FEM global and local strength calculation of platform structure and legs structure using site-specific parameters recommended by DNV rules, such as water depth, wave and wind loads. Also, the global static and dynamic behavior analysis of the jack up unit is presented. From the case study results it may conclude that the proposed methodology offers economic advantages to the field in which they are employed. In the paper, the platform structural capacity, incorporating yielding and buckling, is the limiting condition for the scenario under investigation.展开更多
基金supported by the National Natural Science Foundation of China(Grant No.51079034)the Fundamental Research Funds for the Central Universities(Grant No.HEUCFR1003)
文摘The anti-overturning ability and structure safety of jack-up unit in in-place condition are often affected by environment loads, especially wind load. According to the MODU rule, the projected area method is used for calculating the wind load. However, the calculated results are conservative and not good for structure optimization design. In this paper, a 400 ft jack-up is studied as an example. Based on the wind tunnel test and numerical simulation method, some key points of wind load calculation, such as shielding effect, lift effect and shape coefficient of component, are discussed. The study shows that the points mentioned above, which are ignored in the MODU rule calculation, result in the conservative result.
文摘The paper is focused on the structural problems related to the retrofitting of a ship structure into a maritime self-elevating platform. The study is referred on the design of the global and local strengthening of the platform and legs structures. The joint structure built as the connection between the platform hull and the tubular legs, is designed so that to be acted by the special actuators. The total force provided by the actuators during the lifting operations is necessary to balance the total weight of the platform hull and operating equipment. The work described in the paper shows a methodology for FEM global and local strength calculation of platform structure and legs structure using site-specific parameters recommended by DNV rules, such as water depth, wave and wind loads. Also, the global static and dynamic behavior analysis of the jack up unit is presented. From the case study results it may conclude that the proposed methodology offers economic advantages to the field in which they are employed. In the paper, the platform structural capacity, incorporating yielding and buckling, is the limiting condition for the scenario under investigation.
