Wind-Vortex-Induced Vibrations of a Deepwater Jacket Pipe and Vibration Suppression Using a Nonlinear Energy Sink

The purpose of this study is to investigate the suppression effect of a nonlinear energy sink(NES)on the wind-vortex-induced pipe vibration and explore the influence of damping,stiffness,and NES installation position on the suppression effect.In this work,the wind-vortex-induced vibration of an elastic pipe of a deepwater jacket was studied,and vibrations were suppressed by using an NES.A van der Pol wake oscillator was used to simulate vortex-induced force,and the dynamic equation of the pipe considering the NES was established.The Galerkin method was applied to discretize the motion equation,and the vortex-induced vibration(VIV)of the pipe at reduced wind speeds was numerically analyzed.The novelty of this research is that particle swarm optimization was used to optimize the parameters of the NES to improve vibration suppression.The influence of the installation position,nonlinear stiffness,and damping parameters of the NES on vibration suppression was analyzed.Results showed that the optimized parameter combinations of the NES can effectively reduce wind-vortex-induced pipe vibration.The installation position of the NES had a significant effect on vibration suppression,and the midpoint of the pipe was the optimal NES installation position.An increase in stiffness or a 10% decrease in damping may cause vibration suppression failure.The results of this study provide some guidance for VIV suppression in deepwater jacket pipes.

Lateral ring compression test applied to a small caliber steel jacket:Identification of a constitutive model

The evolution of threats and scenarios requires continuous performance improvements of ballistic protections for armed forces.From a modeling point of view,it is necessary to use sufficiently precise material behavior models to accurately describe the phenomena observed during the impact of a projectile on a protective equipment.In this context,the goal of this paper is to characterize the behavior of a small caliber steel jacket by combining experimental and numerical approaches.The experimental method is based on the lateral compression of ring specimens directly machined from the thin and small ammunition.Various speeds and temperatures are considered in a quasi-static regime in order to reveal the strain rate and temperature dependencies of the tested material.The Finite Element Updating Method(FEMU)is used.Experimental results are coupled with an inverse optimization method and a finite element numerical model in order to determine the parameters of a constitutive model representative of the jacket material.Predictions of the present model are verified against experimental results and a parametric study as well as a discussion on the identified material parameters are proposed.The results indicate that the strain hardening parameter can be neglected and the behavior of the thin steel jacket can be described by a modeling without strain hardening sensitivity.

The next GORE-TEX for jackets?

Columbia is a world-renowned manufacturer of outdoor products.Its product range covers all aspects of outdoor equipment such as jackets,down jackets,outdoor footwear,backpacks and accessories.In the outdoor industry,Columbia was the first brand to propose a three-in-one garment design concept.This practical design has since been adopted by almost every outdoor brand.The Columbia Jacket is positioned for urban outdoor recreation.Its rugged materials and design make it suitable for low-altitude outdoor sports as well as urban commuting.

Upgrading jackets for spring

When the gentle breeze of spring starts to fill the air,it's often a time of transition,where the chill of winter gives way to the warmth of the coming season.However,for those who love the outdoors,spring can still present its own set of challenges,especially when it's time to choose the right jacket.Whether you're hiking in the hills,exploring the trails,or just taking a leisurely walk in the park,having a jacket that offers the perfect blend of warmth,comfort,and breathability is crucial.We'll delve into the various options available for jackets that are perfect for the outdoors in spring.

Why own an Arc’teryx jacket?

Arc’teryx’s Beta AR Jacket sets a new bar in terms of what a mainstream outdoor jacket can do.You’ll turn around and charge headfirst into a rainstorm with this fully impermeable outer layer that packs in everything you need to lock in your core and stay dry.Unlike some jackets,the best part is that this jacket also pays dividends in sunny weather.While it’s designed for nasty weather,it stays comfortable when the storm passes away.The company’s high-tech waterproof membrane simultaneously wicks moisture and finally kicks that classic clammy raincoat feeling to the curb.

Hydrodynamic Characteristics of Three-Bucket Jacket Foundation for Offshore Wind Turbines During the Lowering Process

The three-bucket jacket foundation is a new type of foundation for offshore wind turbine that has the advantages of fast construction speed and suitability for deep water. The study of the hoisting and launching process is of great significance to ensure construction safety in actual projects. In this paper, a new launching technology is proposed that is based on the foundation of the three-bucket jacket for offshore wind turbine. A complete time domain simulation of the launching process of three-bucket jacket foundation is carried out by a theoretical analysis combined with hydrodynamic software Moses. At the same time, the effects of different initial air storage and sea conditions on the motion response of the structure and the hoisting cable tension are studied. The results show that the motion response of the structure is the highest when it is lowered to 1.5 times the bucket height. The natural period of each degree of freedom of the structure increases with the increase of the lowering depth. The structural motion response and the hoisting cable tension vary greatly in the early phases of Stages Ⅰ and Ⅲ, smaller in Stage Ⅱ, and gradually stabilize in the middle and late phases of Stage Ⅲ.

Modal Parameter Identification Method of Jacket Platform Structure Based on AFDD and Optimized FBFFT

Offshore platforms are susceptible to structural damage due to prolonged exposure to random loads,such as wind,waves,and currents.This is particularly true for platforms that have been in service for an extended period.Identifying the modal parameters of offshore platforms is crucial for damage diagno sis,as it serves as a prerequisite and foundation for the process.Therefore,it holds great significance to prioritize the identification of these parameters.Aiming at the shortcomings of the traditional Fast Bayesian Fast Fourier Transform(FBFFT) method,this paper proposes a modal parameter identification method based on Automatic Frequency Domain Decomposition(AFDD) and optimized FBFFT.By introducing the AFDD method and Powell optimization algorithm,this method can automatically identify the initial value of natural frequency and solve the objective function efficiently and simply.In order to verify the feasibility and effectiveness of the proposed method,it is used to identify the modal parameters of the IASC-ASCE benchmark model and the j acket platform structure model,and the Most Probable Value(MPV) of the modal parameters and their respective posterior uncertainties are successfully identified.The identification results of the IASC-ASCE benc hmark model are compared with the identification re sults of the MODE-ID method,which verifies the effectivene ss and accuracy of the proposed method for identifying modal parameters.It provides a simple and feasible method for quantifying the influence of uncertain factors such as environmental parameters on the identification results,and also provide s a reference for modal parameter identification of other large structures.

Seismic strengthening of reinforced concrete columns damaged by rebar corrosion using combined CFRP and steel jacket

In order to study the effectiveness of combined carbon fiber-reinforced polymer （CFRP） sheets and steel jacket in strengthening the seismic performance of corrosion-damaged reinforced concrete （RC） columns, twelve reinforced concrete columns are tested under combined lateral cyclic displacement excursions and constant axial load. The variables studied in this program include effects of corrosion degree of the rebars, level of axial load, the amount of CFRP sheets and steel jacket. The results indicate that the combined CFRP and steel jacket retrofitting technique is effective in improving load-carrying, ductility and energy absorption capacity of the columns. Compared with the corrosion-damaged RC column, the lateral load and the ductility factor of many strengthened columns increase more than 90% and 100%, respectively. The formulae for the calculation of the yielding load, the maximum lateral load and the displacement ductility factor of the strengthened columns under combined constant axial load and cyclically increasing lateral loading are developed. The test results are also compared with the results obtained from the proposed formulae. A good agreement between calculated values and experimental results is observed.

一种新的快速反循环分块Jacket变换

受反循环矩阵和Jacket变换的启发,给出反循环分块Jacket变换对应的矩阵结构,进而获得了其任意阶的构造方法,丰富了Jacket变换的内容.随后基于克罗内克积及高阶反循环分块Jacket矩阵对应的置换矩阵,提出了该Jacket变换的前后向矩阵的一种递归形式的快速构造与分解算法.相比直接计算方法,该快速算法拥有更低的计算复杂度.而且本文提出的构造方法及快速算法也可以应用到其它具有类似结构的其它反循环分块Jacket变换中.

有限域上快速分块Jacket变换

提出了一种在有限域上的简单上闭链分块逆Jacket变换(CBIJT)。为将高阶的上闭链逆Jacket矩阵(CBIJM)因式分解成单位矩阵和低阶稀疏矩阵,考虑运用带来快速变换的连续结构来减少计算负荷。采用类似的递归方式分析两个CBIJT,即单维和双维CBIJT。这两个CBIJT为单位矩阵和低阶CBIJT的多重Kronecker积。

Analyzing the safety of removal sequences for piles of an offshore jacket platform

An inevitable consequence of the development of the offshore petroleum industry is the eventual obsolescence of large offshore structures. Proper methods for removal of decommissioned offshore platforms are becoming an important topic that the oil and gas industry must pay increasing attention to. While removing sections from a decommissioned jacket platform, the stability of the remaining parts is critical The jacket danger indices D ~ and Ds defined in this paper are very useful for analyzing the safety of any procedure planned for disassembling a jacket platform. The safest piles cutting sequence can be determined easily by comparing every column of Do and Ds or simply analyzing the figures of every row ofD o and D,.

应用CUDA加速免疫算法——Jacket与Matlab实现

作为继遗传算法后新兴的一种人工智能算法——免疫算法最近几年在理论研究和工程应用方面得到了极大的关注和发展,但由于免疫算法本身机理的并行性使得其在通用CPU上进行测试和运行时效率低下,不利于评价算法的性能。通过通用并行计算架构CUDA使用GPU运行则更符合算法本身机理,大幅节省运行时间,降低硬件成本。

Reliability-Based Design for Jacket Platform Under Extreme Loads

In this paper, reliability analysis for the offshore jacket platform with the interaction of structure- pile- soil under extreme environmental loads is carried out. The inherent uncertainties of the environmental load, foundation soil, platform itself, and calculating models are evaluated. The action of extreme loads on the offshore platform is modeled as a function of extreme wave height. The system capacity of the whole platform is determined by nonlinear pushover analysis, and the relevant probability property is obtained by the simulation method. The reliability model for the whole jacket platform is described as the relationship between the load and resistance based on the offshore design codes. The reliability of whole platform is calculated by the analytical method and the importance sampling method on the basis of a case study for a tripod jacket platform.

Calibration of LRFD Format for Steel Jacket Offshore Platforms in China Offshore Area(1) :Statistical Parameters of Loads and Resistances

The statistical characteristics and parameters of loads and resistances are systematically studied for the development of probabilistic limit state design method for steel jacket offshore platforms in the China offshore area. The mean value, standard variance and distribution pattern of resistances and loads in different base perieds are presented. The statistical parameters of structural member resistance, self-weight, deck live load, and environmental loads such as wind, wave, current and ice, which are drawn on a large amount of observatian data of offshore environmental factors, and the design data of platforms in China Bohai Sea form the data set, providing a necessary basis for the calibration of load and resistance factors to realize the reliability-based design of jacket platform structures.

Fluid Flow and Heat Transfer Characteristic of Outer and Inner Half Coil Jackets

The physical models of the outer and inner half coil jackets were simplified to two types of coiled ducts.The mathematic models of incompressible fluid at the condition of laminar flow and heat transfer in the two types of jackets for cooling process reactor were set up and solved by the semi-implicit method for pressure linked equa-tions consistent （SIMPLEC） algorithm based on a control volume method.The flow and temperature fields were given and the effects of Dean and Prandtl numbers on flow and heat transfer were studied.The results show that flow in the inner half coil jacket is found to exhibit transition of secondary flow pattern from two vortices to four vortices when the Dean number increases,but that in the outer half coil jacket is not found.The critical Dean num-ber is about 96.The inner half coil jacket has stronger heat transfer ability than the outer half coil jacket and this superiority is more evident with larger Prandtl number.However,as the Dean number is greater than 105,the flow resistance enhances more severely in the inner jacket than the outer jacket.For both jackets,the centers of the heated wall are the poorest for heat transfer.

Fragility curves of concrete bridges retrofitted by column jacketing

The Northridge earthquake inflicted various levels of damage upon a large number of Caltrans' bridges not retrofitted by column jacketing.In this respect,this study represents results of fragility curve development for two (2) sample bridges typical in southern California,strengthened for seismic retrofit by means of steel jacketing of bridge columns.Monte Carlo simulation is performed to study nonlinear dynamic responses of the bridges before and after column retrofit.Fragility curves in this study are represented by lognormal distribution functions with two parameters and developed as a function of PGA.The sixty (60) ground acceleration time histories for the Los Angeles area developed for the Federal Emergency Management Agency (FEMA) SAC (SEAOC-ATC CUREe) steel project are used for the dynamic analysis of the bridges. The improvement in the fragility with steel jacketing is quantified by comparing fragility curves of the bridge before and after column retrofit.In this first attempt to formulate the problem of fragility enhancement,the quantification is made by comparing the median values of the fragility curves before and after the retrofit.Under the hypothesis that this quantification also applies to empirical fragility curves developed on the basis of Northridge earthquake damage,the enhanced version of the empirical curves is developed for the ensuing analysis to determine the enhancement of transportation network performance due to the retrofit.

快速r循环分块Jacket变换

由中心权重哈达玛变换发展而来的Jacket变换,因其正交性、求逆简单和拥有快速算法等特点逐渐受到关注。Jacket变换可应用于信号与图像处理、数字移动通信、量子编码、大数据处理等领域。为了进一步丰富Jacket变换理论,提出了一种通用的循环分块Jacket变换(r-circulant block Jacket transform,r-CBJT)。同时基于基本的r循环分块矩阵的性质,给出了任意阶r循环分块Jacket变换矩阵的构造方法。随后进一步推导了任意阶r循环分块Jacket变换矩阵的快速构造与分解算法,该快速算法可表示为单位矩阵与低阶Jacket矩阵连续克罗内克积的迭代形式。相比直接计算算法,该快速算法拥有更高的计算效率,且该快速算法也可应用于具有类似结构的其他类型的r循环分块Jacket变换。

Curvature of Flexibility Matrix for Damage Identification in Legs of Jacket Platforms

In this paper a new nondestructive damage identification method is introduced. The method based on flexibility matrix can be used to detect and locate structm＇al damage and evaluate the severity of damage in legs of jacket platforms by modal parameters of a structure. With the modal data for only the few lower modes in both the intact and damaged states, the one-dimensional and two-dimensional distributed curvatures can be used to analyze damage location and the severity. Instead of directly comparing the curvatures before and ＇after damage, the method here uses modal parameters only in the damaged structure to detect the damage and it consists of three parts. First, ilexibility matrix is obtained by use of the absolute maximum in each column. Second, because the legs of jacket platforms are the pipe-like structure, the circumferential flexibility curvature matrix is obtained by use of the circular curvature. At last, equivalent curvature ratio is defined and the curve meaning equivalent curvature ratio and the severity of damage relationship for one element is given through the data of damage severity from ten percent to ninety percent by numerical simulation. Many existing damage detection methods need two steps, locate the damage firstly and evaluate the severity of the damage. However, the method present- ed! in this paper can locate and then evaluate the severity of damage at the same time. The numerical analysis results in- dicate that the present method is effective, useful and only need the first and the second mode data of the structure.

Calculation of wave and current loads on launching offshore jacket

It’s very complicated to calculate and analyze the wave and current loads on naval architectures since the sea condition is uncertain and complicated and the determinants vary from different form types and dimensions. For calculating the wave and current loads on upright small-long-size pipe, the Morrison equation is practical and applied. Jacket platform is a kind of offshore space frame structure comprised of lots of poles that are circular cylinders with small diameter and in the oblique status relative to seabed. In this paper, based on Morrison equation, the specific method and procedure calculating the wave and current loads on launching jacket are given and applied on a typical launching jacket. The instance shows that the method and procedure are convenient and make the calculation and analysis in good agreement with actual launching.

System Reliability Analysis of an Offshore Jacket Platform

This study investigates strategies for solving the system reliability of large three-dimensional jacket structures.These structural systems normally fail as a result of a series of different components failures.The failure characteristics are investigated under various environmental conditions and direction combinations.Theβ-unzipping technique is adopted to determine critical failure components,and the entire system is simplified as a series-parallel system to approximately evaluate the structural system reliability.However,this approach needs excessive computational effort for searching failure components and failure paths.Based on a trained artificial neural network(ANN),which can be used to approximate the implicit limit-state function of a complicated structure,a new alternative procedure is proposed to improve the efficiency of the system reliability analysis method.The failure probability is calculated through Monte Carlo simulation(MCS)with Latin hypercube sampling(LHS).The features and applicability of the above procedure are discussed and compared using an example jacket platform located in Chengdao Oilfield,Bohai Sea,China.This study provides a reference for the evaluation of the system reliability of jacket structures.