Master event location method was described in detail in this paper. Some problems in the application of master event method have been analyzed and some improvements of the method have been made. As compared the locat...Master event location method was described in detail in this paper. Some problems in the application of master event method have been analyzed and some improvements of the method have been made. As compared the location results of MS>=3.0 earthquakes of Jiashi swarm obtained by using this method with that by the traditional absolute method, the result obtained by using the master event method shows more reasonable and more consistent with that from the focal mechanism solutions. After relocation, we can see, the epicenters of M>=5.0 earthquakes show an echelon-type alignment along NNW-SSE direction, and all earthquakes concentrate nearly in a volume region about 30 km (N-S) × 15 km (E-W) × 15 km (U-D). Earthquake focal depths are mainly in the range of 15-28 km.展开更多
A three-dimensional temporary seismic transmission array was arranged in a 50x60 km2 region around Jiashi strong earthquake swarm to receive seismic waves generated by 8 fires from different azimuths. With the inversi...A three-dimensional temporary seismic transmission array was arranged in a 50x60 km2 region around Jiashi strong earthquake swarm to receive seismic waves generated by 8 fires from different azimuths. With the inversion method without model blocks and using P and S reflections from Moho at critical distances, the 3-D images of P, S velocity perturbation and ratio vP/vS perturbation of the upper crust under the seismic array were reconstructed. Meanwhile, the seismicity of the Jiashi earthquake swarm was taken into consideration in the analysis of the seismogenesis. The results indicate that the upper crustal structure under the Jiashi strong earthquake swarm region is characterized by significant inhomogeneity both laterally and vertically. From 12 km depth, it is clear that there is an NNW-oriented high P-wave velocity anomalous body corresponding to the epicenter of the swarm with low-velocity anomaly around it, which is the direct cause of the strong earthquakes. High vP/vS is distributed in the same location, which may indicate the decline of shear strength of the source region owing to relative softness of the medium, this can be accounted as an explanation for the seismicity feature of the Jiashi strong earthquake swarm.展开更多
The data obtained from a high resolution seismic refraction profile, which was carded out in Jiashi, Xinjiang, strong earthquake swarm area, were processed with both finite difference inversion and Hagedoorn refractor...The data obtained from a high resolution seismic refraction profile, which was carded out in Jiashi, Xinjiang, strong earthquake swarm area, were processed with both finite difference inversion and Hagedoorn refractor wavefront imaging technique and the fine upper crustal structure was determined. The results show that the upper crustal structure is relatively well-distributed in laterally and obviously by layers vertically.From surface to 11.0 km depth, there are about four layers. The P wave velocity of top two layers range from 1.65 to 4.5 km/s and their bottom boundaries, the buried depths of which are 0.4, 2.96-3.0 km respectively, are almost horizontal; The third layer is comparatively complicated and its P wave velocity presents inhomogeneous in both laterally and vertically. The bottom boundary of third layer is crystalline basement and shows a little uplift, which seemly suggest that the upper crust had been resisted while the hard Tarim block inserting into Tianshan Mountain; The forth layer is relatively even and its P wave velocity is about 6.3 km/s. There are a lateral velocity variation at the depth of about 4.0 km, and suggest that it has something to do with the hidden Meigaiti fault and Meigaiti-Xiasuhong fault but there are no the structure features about these faults stretching to the surface and passing through the crystalline basement. The seismogenic tectonic of Jiashi strong earthquake swarm at least lies in middle or lower crust beneath 11.0 km depth.展开更多
The seismic data obtained from high resolution seismic refraction profile in Jiashi strong earthquake swarm area in Xinjiang, China were further processed with ray hit analysis method and more complete basement interf...The seismic data obtained from high resolution seismic refraction profile in Jiashi strong earthquake swarm area in Xinjiang, China were further processed with ray hit analysis method and more complete basement interface structural characteristics beneath Jiashi strong earthquake swarm area were determined. The results show that there are two clear basement interfaces at the upper crust in Jiashi strong earthquake swarm area. The first one with buried depth ranging from 2.6 km to 3.3 km presents integral and continuous structure, and it appears an inclined plane interface and smoothly rises up toward Tianshan Mountain. The second basement interface with buried depth from 8.5 km to 11.8 km, is the antiquated crystalline basement of Tarim basin. Near the post number of 37 km, the buried depth of the crystalline basement changed abruptly by 2.5 km, which maybe result from an ultra crystalline basement fault. If taking this fault as a boundary, the crystalline basement could be divided into two parts, i.e. the southwestern segment with buried depth about 11.5 km, and the northeastern segment with buried depth approxi-mately from 8.5 km to 9.0 km. That is to say, in each segment, the buried depth changes not too much. The northeast segment rises up as a whole and upheaves slightly from southwest to northeast, which reflects the upper crustal deformation characteristics under the special tectonic background at the northwestern edge of Tarim basin.展开更多
2-D crustal structure and velocity ratio are obtained by processing S-wave data from two wide-angle reflec-tion/refraction profiles in and around Jiashi in northeastern Pamir, with the result of P-wave data taken into...2-D crustal structure and velocity ratio are obtained by processing S-wave data from two wide-angle reflec-tion/refraction profiles in and around Jiashi in northeastern Pamir, with the result of P-wave data taken into con-sideration. The result shows that: 1) Average crustal velocity ratio is obviously higher in Tarim block than in West Kunlun Mts. and Tianshan fold zone, which reflects its crustal physical property of 'hardness' and stability. The relatively low but normai velocity ratio (Poisson's ratio) of the lower crust indicates that the 'downward thrusting' of Tarim basin is the main feature of crustal movement in this area. 2) The rock layer in the upper crust of Tianshan fold zone is relatively 'soft', which makes it prone to rupture and stress energy release. This is the primary tectonic factor for the concentration of small earthquakes in this area. 3) Jiashi is located right over the apex or the inflection point of the updoming lower crustal interface C and the crust-mantle boundary, which is the deep struc-tural background for the occurrence of strong earthquakes. The alternate variation of vp/vs near the block bounda-ries and the complicated configuration of the interfaces in the upper and middie part of the upper crust form a par-ticular structural environment for the Jiashi strong earthquake swarm. vp/vs is comparatively high and shear modulus is low at the focal region, which may be the main reason for the low stress drop of the Jiashi strong earthquake swarm.展开更多
文摘Master event location method was described in detail in this paper. Some problems in the application of master event method have been analyzed and some improvements of the method have been made. As compared the location results of MS>=3.0 earthquakes of Jiashi swarm obtained by using this method with that by the traditional absolute method, the result obtained by using the master event method shows more reasonable and more consistent with that from the focal mechanism solutions. After relocation, we can see, the epicenters of M>=5.0 earthquakes show an echelon-type alignment along NNW-SSE direction, and all earthquakes concentrate nearly in a volume region about 30 km (N-S) × 15 km (E-W) × 15 km (U-D). Earthquake focal depths are mainly in the range of 15-28 km.
基金State Natural Science Foundation of China (49834005), the Project (9691307) from Ministry of Science and Technology and the Chin
文摘A three-dimensional temporary seismic transmission array was arranged in a 50x60 km2 region around Jiashi strong earthquake swarm to receive seismic waves generated by 8 fires from different azimuths. With the inversion method without model blocks and using P and S reflections from Moho at critical distances, the 3-D images of P, S velocity perturbation and ratio vP/vS perturbation of the upper crust under the seismic array were reconstructed. Meanwhile, the seismicity of the Jiashi earthquake swarm was taken into consideration in the analysis of the seismogenesis. The results indicate that the upper crustal structure under the Jiashi strong earthquake swarm region is characterized by significant inhomogeneity both laterally and vertically. From 12 km depth, it is clear that there is an NNW-oriented high P-wave velocity anomalous body corresponding to the epicenter of the swarm with low-velocity anomaly around it, which is the direct cause of the strong earthquakes. High vP/vS is distributed in the same location, which may indicate the decline of shear strength of the source region owing to relative softness of the medium, this can be accounted as an explanation for the seismicity feature of the Jiashi strong earthquake swarm.
基金National Natural Science Foundation of China (40334040) and Joint Seismological Foundation (106076).
文摘The data obtained from a high resolution seismic refraction profile, which was carded out in Jiashi, Xinjiang, strong earthquake swarm area, were processed with both finite difference inversion and Hagedoorn refractor wavefront imaging technique and the fine upper crustal structure was determined. The results show that the upper crustal structure is relatively well-distributed in laterally and obviously by layers vertically.From surface to 11.0 km depth, there are about four layers. The P wave velocity of top two layers range from 1.65 to 4.5 km/s and their bottom boundaries, the buried depths of which are 0.4, 2.96-3.0 km respectively, are almost horizontal; The third layer is comparatively complicated and its P wave velocity presents inhomogeneous in both laterally and vertically. The bottom boundary of third layer is crystalline basement and shows a little uplift, which seemly suggest that the upper crust had been resisted while the hard Tarim block inserting into Tianshan Mountain; The forth layer is relatively even and its P wave velocity is about 6.3 km/s. There are a lateral velocity variation at the depth of about 4.0 km, and suggest that it has something to do with the hidden Meigaiti fault and Meigaiti-Xiasuhong fault but there are no the structure features about these faults stretching to the surface and passing through the crystalline basement. The seismogenic tectonic of Jiashi strong earthquake swarm at least lies in middle or lower crust beneath 11.0 km depth.
基金Foundation item: Joint Seismological Foundation of China (106076)National Natural Science Foundation of China (40474049, 40334040).
文摘The seismic data obtained from high resolution seismic refraction profile in Jiashi strong earthquake swarm area in Xinjiang, China were further processed with ray hit analysis method and more complete basement interface structural characteristics beneath Jiashi strong earthquake swarm area were determined. The results show that there are two clear basement interfaces at the upper crust in Jiashi strong earthquake swarm area. The first one with buried depth ranging from 2.6 km to 3.3 km presents integral and continuous structure, and it appears an inclined plane interface and smoothly rises up toward Tianshan Mountain. The second basement interface with buried depth from 8.5 km to 11.8 km, is the antiquated crystalline basement of Tarim basin. Near the post number of 37 km, the buried depth of the crystalline basement changed abruptly by 2.5 km, which maybe result from an ultra crystalline basement fault. If taking this fault as a boundary, the crystalline basement could be divided into two parts, i.e. the southwestern segment with buried depth about 11.5 km, and the northeastern segment with buried depth approxi-mately from 8.5 km to 9.0 km. That is to say, in each segment, the buried depth changes not too much. The northeast segment rises up as a whole and upheaves slightly from southwest to northeast, which reflects the upper crustal deformation characteristics under the special tectonic background at the northwestern edge of Tarim basin.
基金State Key Basic Development and Programming Project (G1998040702)the Project (9691307) from Ministry of Science and Technology and China Seismological Bureau.
文摘2-D crustal structure and velocity ratio are obtained by processing S-wave data from two wide-angle reflec-tion/refraction profiles in and around Jiashi in northeastern Pamir, with the result of P-wave data taken into con-sideration. The result shows that: 1) Average crustal velocity ratio is obviously higher in Tarim block than in West Kunlun Mts. and Tianshan fold zone, which reflects its crustal physical property of 'hardness' and stability. The relatively low but normai velocity ratio (Poisson's ratio) of the lower crust indicates that the 'downward thrusting' of Tarim basin is the main feature of crustal movement in this area. 2) The rock layer in the upper crust of Tianshan fold zone is relatively 'soft', which makes it prone to rupture and stress energy release. This is the primary tectonic factor for the concentration of small earthquakes in this area. 3) Jiashi is located right over the apex or the inflection point of the updoming lower crustal interface C and the crust-mantle boundary, which is the deep struc-tural background for the occurrence of strong earthquakes. The alternate variation of vp/vs near the block bounda-ries and the complicated configuration of the interfaces in the upper and middie part of the upper crust form a par-ticular structural environment for the Jiashi strong earthquake swarm. vp/vs is comparatively high and shear modulus is low at the focal region, which may be the main reason for the low stress drop of the Jiashi strong earthquake swarm.