To investigate the recurrence behaviors of segment-rupturing eathquakes on active faults of the Chinese mainland, thispaper analyzes quantitatively earthquake history of 19 fault segments based on earthquake dam of mu...To investigate the recurrence behaviors of segment-rupturing eathquakes on active faults of the Chinese mainland, thispaper analyzes quantitatively earthquake history of 19 fault segments based on earthquake dam of multi-cyclerecurrences. The result shows that, for these fault segments, eanhquake recurring at previous locations is mainlycharacterized by both quasi-periodic (in a ratio of about) and time-predictable (in a ratio of about) behaviors.For the first behavior. intrinsic uncertainty of recurrence interval accounts for 0. 15-0.40 of the average interval, andmagnitudes of event vary from cycle to cycle within the range of the mean magnitUde t0.5. For the second behavior,intrinsic uncertainty of recurrence interval ranges mostly from 0. 19 to 0.40 of the average interval, and for successivetwo cycles the maximum change of event magnitudes is as much as 1.7 magnitude-units. In addition, for a few casesthe first behavior coexists along with either the second or the slip-predictable behaviors.展开更多
Based on the earthquake data of 11 active intraplate fault zones of the Chinese mainland, we have studied the earthquake recurrence behaviors on entire active fault zones and their relations to those on individual fau...Based on the earthquake data of 11 active intraplate fault zones of the Chinese mainland, we have studied the earthquake recurrence behaviors on entire active fault zones and their relations to those on individual fault-segments. The results show that the earthquake recurrence on entire active fault zones, each of them is made up of multiple segments, displays three types of behavior, i.e., the clustering behavior, the random behavior, and the poor quasi-periodic behavior. The major one is the sparse clustering behavior, its recurrence process often exhibits that clusters (active periods) and gaps (quiescent periods) occur alternatively in varying degrees. The recurrence intervals within and between clusters, the durations of individual clusters, the earthquake number and strength of every cluster are all variable. The recurrence process is non-linear, there is neither the strength-time dependence nor the time-strength dependence. However, the earthquake recurrence processes on individual fault-segments are much more simple, and mainly display either the quasi-periodic or the time-predictable behaviors. Also, this study further discovers that the temporal clustering in earthquake recurrence process on entire fault zones is mainly caused by the rupture 'contagion' on different fault-segments within relatively short periods of time. Along active fault zones, the degree and orientation of rupture 'contagion' may vary with different seismic cycles, and the 'contagion' seems to be able to jump over unbroken 'gaps' on the fault zones.展开更多
Field investigations allow to constrain the co-seismic surface rupture zone of ～400 km with a strike-slip up to 16.3 m associated with the 2001 Mw 7.8 Central Kunlun earthquake that occurred along the western segment...Field investigations allow to constrain the co-seismic surface rupture zone of ～400 km with a strike-slip up to 16.3 m associated with the 2001 Mw 7.8 Central Kunlun earthquake that occurred along the western segmentof the Kunlun fault, northern Tibet. The co-seismic rupture structures are almost duplicated on the pre-existing fault traces of the Kunlun fault. The deformational characteristics of the co-seismic surface ruptures reveal that the earthquake had a nearly pure strike-slip mechanism. The geologic and topographic evidence clearly shows that spatialdistributions of the co-seismic surface ruptures are restricted by the pre-existing geological structures of the Kunlun fault.展开更多
The Taigu fault zone is one of the major 12 active boundary faults of the Shanxi fault-depression system, located on the eastern boundary of the Jinzhong basin. As the latest investigation indicated, the fault zone ha...The Taigu fault zone is one of the major 12 active boundary faults of the Shanxi fault-depression system, located on the eastern boundary of the Jinzhong basin. As the latest investigation indicated, the fault zone had dislocated gully terrace of the first order, forming fault-scarp in front of the loess mesa. It has been discovered in many places in ground surface and trenches that Holocene deposits were dislocated. The latest activity was the 1303 Hongdong earthquake M=8, the fault appeared as right-lateral strike-slip with normal faulting. During that earthquake, the Taigu fault together with the Mianshan western-side fault on the Lingshi upheaval and the Huoshan pediment fault on the eastern boundary of the Linfen basin was being active, forming a surface rupture belt of 160 km in length. Moreover, the Taigu fault were active in the mid-stage of Holocene and near 7 700 aB.P. From these we learnt that, in Shanxi fault-depression system, the run-through activity of two boundary faults of depression-basins might generate great earthquake with M=8.展开更多
A major earthquake occurrence zone means a place where M≥6 events have occurred since the Holocene and similar shocks may happen again in the future. The dynamic context of the major earthquake occurrence zones in Ch...A major earthquake occurrence zone means a place where M≥6 events have occurred since the Holocene and similar shocks may happen again in the future. The dynamic context of the major earthquake occurrence zones in China is primarily associated with the NNE-directed push of the India plate,next with the westward subduction of the Pacific plate. The Chinese mainland is a grand mosaic structure of many crust blocks bounded by faults and sutures. When it is suffered from boundary stresses,deformation takes place along these faults or sutures while the block interiors remain relatively stable or intact. Since the Quaternary,for example,left slip on the Xianshuihe-Xiaojiang fault zone in southwestern China has produced a number of fault-depression basins in extensional areas during periods Q1 and Q2. In the Q3,the change of stress orientation and enhancement of tectonic movement made faults of varied trends link each other,and continued to be active till present day,producing active fault zones in this region. Usually major earthquakes occur at some special locations on these active fault zones. During these events,in the epicenter areas experience intensive deformation characterized by large-amplitude rise and fall of neighboring sections,generation of horst-graben systems and dammed rivers. The studies on palaeoearthquakes suggest that major shocks of close magnitudes often repeated for several times at a same place. By comparison of the Chi-Chi,Taiwan event in 1999 and Yuza,Yunnan event in 1955,including contours of accelerations and intensities,destruction of buildings,and in contrast to the Xigeda formation in southwestern China,a sandwich model is established to account for the mechanism of deformation caused by major earthquakes. This model consists of three layers,i. e. the two walls of a fault and the ruptured zone intercalated between them. This ruptured zone is just the loci where stress is built up and released,and serves as a channel for seismic waves.展开更多
The East Kunlun active fault zone, which lies in the valley of the Kunlun Mountains above an elevation of 4,000 meters, is an important active fault zone in the Northeast Qinghai-Xizang (Tibet) Plateau. The 1937, the ...The East Kunlun active fault zone, which lies in the valley of the Kunlun Mountains above an elevation of 4,000 meters, is an important active fault zone in the Northeast Qinghai-Xizang (Tibet) Plateau. The 1937, the Tosonhu lake M_S7.5 earthquake occurred in the eastern segment of the East Kunlun active fault zone. Four field investigations were launched on this seism in 1963, 1971, 1980, and between 1986 and 1990. However, due to different extents of the investigations, four different conclusions have been gained. Concerning the length aspect of the surface rupture zone of this earthquake, the unanimous consensus is that its eastern end lies in the west side of the main Ridge of the A'nyêmaqên Mountains, but opinions about the western end and the location of the macro-epicenter are different. Based on investigation and comprehensive study, a series of scientific problems like geometric and kinetic characteristics, the length of the rupture zone, the maximum sinistral horizontal displacement and the macro-epicenter were re-evaluated. We believe that the total length of this earthquake's surface deformation zone is at least 240km; the western end of the zone is at the west of Wusuwuwoguole; the maximum sinistral horizontal displacement is 8m to the west of Baerhalasha gully on the east side of Sanchakou; the maximum vertical displacement is 3.5m in the south of Sanchakou and the macro-epicenter is in Sanchakou.展开更多
Inversion for the seismic fault rupture history is an important way to study the nature of the earthquake source. Inthis paper, we have selected two Taiwan earthquakes that occurred closely in time and located in the ...Inversion for the seismic fault rupture history is an important way to study the nature of the earthquake source. Inthis paper, we have selected two Taiwan earthquakes that occurred closely in time and located in the same region,inversed the distribution of the slip amplitudes, rakes, risetimes and the rupture times on the fault planes by usingGDSN broad-band and long-period records and the adaptive hybrid global search algorithm, and compared the twoevents. The slip rate of every subfault calculated provides information about the distribution of tectonic stress andfault strength. To the former event (Ms=6.0), the maximum slip amplitude 2.4 m and the minimum risetime 1.2 sare both located at the hypocentre. The latter earthquake (Ms=6.6) consisted of two subevents and the second source has 4 s delay. The maximum slip amplitUde 0.9 m located near hypocentre is corresponding to the minimumrisetime l.4 s, and the corresponding maximum slip rate 0.7 m.s~-1 is similar to the peak value of other large sliprate areas. We consider that the latter event has more complicated temporal-spatial distribution than the former.展开更多
文摘To investigate the recurrence behaviors of segment-rupturing eathquakes on active faults of the Chinese mainland, thispaper analyzes quantitatively earthquake history of 19 fault segments based on earthquake dam of multi-cyclerecurrences. The result shows that, for these fault segments, eanhquake recurring at previous locations is mainlycharacterized by both quasi-periodic (in a ratio of about) and time-predictable (in a ratio of about) behaviors.For the first behavior. intrinsic uncertainty of recurrence interval accounts for 0. 15-0.40 of the average interval, andmagnitudes of event vary from cycle to cycle within the range of the mean magnitUde t0.5. For the second behavior,intrinsic uncertainty of recurrence interval ranges mostly from 0. 19 to 0.40 of the average interval, and for successivetwo cycles the maximum change of event magnitudes is as much as 1.7 magnitude-units. In addition, for a few casesthe first behavior coexists along with either the second or the slip-predictable behaviors.
基金Chinese Joint Seismological Science Foundation !(95-07-423).
文摘Based on the earthquake data of 11 active intraplate fault zones of the Chinese mainland, we have studied the earthquake recurrence behaviors on entire active fault zones and their relations to those on individual fault-segments. The results show that the earthquake recurrence on entire active fault zones, each of them is made up of multiple segments, displays three types of behavior, i.e., the clustering behavior, the random behavior, and the poor quasi-periodic behavior. The major one is the sparse clustering behavior, its recurrence process often exhibits that clusters (active periods) and gaps (quiescent periods) occur alternatively in varying degrees. The recurrence intervals within and between clusters, the durations of individual clusters, the earthquake number and strength of every cluster are all variable. The recurrence process is non-linear, there is neither the strength-time dependence nor the time-strength dependence. However, the earthquake recurrence processes on individual fault-segments are much more simple, and mainly display either the quasi-periodic or the time-predictable behaviors. Also, this study further discovers that the temporal clustering in earthquake recurrence process on entire fault zones is mainly caused by the rupture 'contagion' on different fault-segments within relatively short periods of time. Along active fault zones, the degree and orientation of rupture 'contagion' may vary with different seismic cycles, and the 'contagion' seems to be able to jump over unbroken 'gaps' on the fault zones.
文摘Field investigations allow to constrain the co-seismic surface rupture zone of ～400 km with a strike-slip up to 16.3 m associated with the 2001 Mw 7.8 Central Kunlun earthquake that occurred along the western segmentof the Kunlun fault, northern Tibet. The co-seismic rupture structures are almost duplicated on the pre-existing fault traces of the Kunlun fault. The deformational characteristics of the co-seismic surface ruptures reveal that the earthquake had a nearly pure strike-slip mechanism. The geologic and topographic evidence clearly shows that spatialdistributions of the co-seismic surface ruptures are restricted by the pre-existing geological structures of the Kunlun fault.
基金Chinese Joint Seismological Science Foundation (201017).
文摘The Taigu fault zone is one of the major 12 active boundary faults of the Shanxi fault-depression system, located on the eastern boundary of the Jinzhong basin. As the latest investigation indicated, the fault zone had dislocated gully terrace of the first order, forming fault-scarp in front of the loess mesa. It has been discovered in many places in ground surface and trenches that Holocene deposits were dislocated. The latest activity was the 1303 Hongdong earthquake M=8, the fault appeared as right-lateral strike-slip with normal faulting. During that earthquake, the Taigu fault together with the Mianshan western-side fault on the Lingshi upheaval and the Huoshan pediment fault on the eastern boundary of the Linfen basin was being active, forming a surface rupture belt of 160 km in length. Moreover, the Taigu fault were active in the mid-stage of Holocene and near 7 700 aB.P. From these we learnt that, in Shanxi fault-depression system, the run-through activity of two boundary faults of depression-basins might generate great earthquake with M=8.
文摘A major earthquake occurrence zone means a place where M≥6 events have occurred since the Holocene and similar shocks may happen again in the future. The dynamic context of the major earthquake occurrence zones in China is primarily associated with the NNE-directed push of the India plate,next with the westward subduction of the Pacific plate. The Chinese mainland is a grand mosaic structure of many crust blocks bounded by faults and sutures. When it is suffered from boundary stresses,deformation takes place along these faults or sutures while the block interiors remain relatively stable or intact. Since the Quaternary,for example,left slip on the Xianshuihe-Xiaojiang fault zone in southwestern China has produced a number of fault-depression basins in extensional areas during periods Q1 and Q2. In the Q3,the change of stress orientation and enhancement of tectonic movement made faults of varied trends link each other,and continued to be active till present day,producing active fault zones in this region. Usually major earthquakes occur at some special locations on these active fault zones. During these events,in the epicenter areas experience intensive deformation characterized by large-amplitude rise and fall of neighboring sections,generation of horst-graben systems and dammed rivers. The studies on palaeoearthquakes suggest that major shocks of close magnitudes often repeated for several times at a same place. By comparison of the Chi-Chi,Taiwan event in 1999 and Yuza,Yunnan event in 1955,including contours of accelerations and intensities,destruction of buildings,and in contrast to the Xigeda formation in southwestern China,a sandwich model is established to account for the mechanism of deformation caused by major earthquakes. This model consists of three layers,i. e. the two walls of a fault and the ruptured zone intercalated between them. This ruptured zone is just the loci where stress is built up and released,and serves as a channel for seismic waves.
基金the National Science Foundation (Grant No.40474037) and by the Special Programfor Early-stage Investigation of National Major Basic Research of the Ministry of Science and Technology,China (Grant No.JC200016)
文摘The East Kunlun active fault zone, which lies in the valley of the Kunlun Mountains above an elevation of 4,000 meters, is an important active fault zone in the Northeast Qinghai-Xizang (Tibet) Plateau. The 1937, the Tosonhu lake M_S7.5 earthquake occurred in the eastern segment of the East Kunlun active fault zone. Four field investigations were launched on this seism in 1963, 1971, 1980, and between 1986 and 1990. However, due to different extents of the investigations, four different conclusions have been gained. Concerning the length aspect of the surface rupture zone of this earthquake, the unanimous consensus is that its eastern end lies in the west side of the main Ridge of the A'nyêmaqên Mountains, but opinions about the western end and the location of the macro-epicenter are different. Based on investigation and comprehensive study, a series of scientific problems like geometric and kinetic characteristics, the length of the rupture zone, the maximum sinistral horizontal displacement and the macro-epicenter were re-evaluated. We believe that the total length of this earthquake's surface deformation zone is at least 240km; the western end of the zone is at the west of Wusuwuwoguole; the maximum sinistral horizontal displacement is 8m to the west of Baerhalasha gully on the east side of Sanchakou; the maximum vertical displacement is 3.5m in the south of Sanchakou and the macro-epicenter is in Sanchakou.
文摘Inversion for the seismic fault rupture history is an important way to study the nature of the earthquake source. Inthis paper, we have selected two Taiwan earthquakes that occurred closely in time and located in the same region,inversed the distribution of the slip amplitudes, rakes, risetimes and the rupture times on the fault planes by usingGDSN broad-band and long-period records and the adaptive hybrid global search algorithm, and compared the twoevents. The slip rate of every subfault calculated provides information about the distribution of tectonic stress andfault strength. To the former event (Ms=6.0), the maximum slip amplitude 2.4 m and the minimum risetime 1.2 sare both located at the hypocentre. The latter earthquake (Ms=6.6) consisted of two subevents and the second source has 4 s delay. The maximum slip amplitUde 0.9 m located near hypocentre is corresponding to the minimumrisetime l.4 s, and the corresponding maximum slip rate 0.7 m.s~-1 is similar to the peak value of other large sliprate areas. We consider that the latter event has more complicated temporal-spatial distribution than the former.
