Quantitative characterization of deep fault-karst carbonate reservoirs: A case study of the Yuejin block in the Tahe oilfield

The Ordovician reservoirs in the Tahe oilfield are dominated by fractured-vuggy carbonate reservoirs, of which fault-karst reservoirs are a hot topic in recent years. Fault-karst reservoirs feature high production, large burial depth, and strong heterogeneity under the control of faulting and karstification. Based on geological, logging, and seismic data, this study classified the Ordovician fault-karst reservoirs in the Yuejin block of the Tahe oilfield into three types, namely karst-cave, dissolved-vug, and fractured types, and established the integrated identification criteria of the three types of reservoirs. This study characterized karst caves, dissolved vugs, and multi-scale faults through seismic wave impedance inversion and frequency-domain detection of multi-scale faults. 3D geological models of different types of reservoirs were built using the combined deterministic and stochastic methods and characterized the spatial distribution of multi-scale faults, karst caves, dissolved vugs, and physical property parameters of reservoir. This study established the method for the geological modeling of fault-karst reservoirs, achieved the quantitative characterization and revealed the heterogeneity of fault-karst reservoirs. The karst-cave and dissolved-vug types are high in porosity and act as reservoirs, while the fractured type is high in permeability and act as flow pathway. This study lays the foundation for the development index prediction, well emplacement, and efficient development of the fault-karst carbonate reservoirs.

Production evolution patterns and development stage division of waterflooding oilfields

The continuous growth of recoverable reserves in a waterflooding oilfield has a significant impact on the patterns of production evolution. A new production evolution model is established by improving the Weng Cycle model. With the new model, the statistical correspondence between the production decline stage and the reserve-production imbalance is clarified,and the correlation of water cut with the recovery percent of recoverable reserves is discussed, providing quantitative basis of reservoir engineering for dividing development stages of oilfield and defining mature oilfields. According to the statistics of oilfields in eastern China, the time point corresponding to the reserve-production balance coefficient dropping to less than 1dramatically is well correlated the beginning point of production decline, thus the time when the reserve-production balance coefficient drops dramatically can be taken as the initiation point of production decline stage. The research results show that the water cut and the recovery percent of recoverable reserves have a good statistical match in the high water cut stage, and it is more rational to take both the start point of production decline stage and the water cut of 90%(or the recovery percent of recoverable reserves of 80%) as the critical criteria for defining a mature oilfield. Five production evolution patterns can be summarized as follows: growth–peak plateau–stepped decline, growth–stepped stabilizing–stepped decline, growth–stepped stabilizing–rapid decline, growth–peak plateau–rapid decline, and growth–continuous decline.

Development technologies for Triassic Chang 7 shale oil in Ordos Basin: A case study of Qingcheng Oilfield, NW China

The reservoirs in the seventh member of the Triassic Yanchang Formation (Chang 7 Member) in the Qingcheng Oilfield of the Ordos Basin are characterized by thin sandbody, tight rocks, high heterogeneity, low formation pressure coefficient, and complex geomorphology. Through the efforts in the stages of exploration, appraisal, pilot testing and development, a series of key technologies have been formed, including “sweet spot” optimization, differentiated three-dimensional well deployment, fast drilling and completion of large-cluster horizontal well, intensively-staged volume fracturing in long horizontal well, and optimization of rational production system. Furthermore, a production organization mode represented by factory-like operations on loess platform has been implemented. Application of these technologies has enabled to significantly improve the single-well production of the Qingcheng Oilfield, reduce the investment cost, and realize a large-scale and beneficial development at a full cost below $55 per barrel. In 2022, the annual production of Chang 7 shale oil in the Ordos Basin reached 221×10^(4) t, accounting for 70% of the annual shale oil production of China. The practice of development technologies in the Qingcheng Oilfield provides valuable references for efficient development of continental shale oil.

Origin of gas condensate reservoir in Fuman Oilfield, Tarim Basin, NW China

To understand the reservoir property and hydrocarbon accumulation conditions of the Middle and Upper Ordovician intraplatform shoal between ultra-deep main strike-slip faults in Fuman Oilfield of the Tarim Basin, China, the main strike-slip faults in and around well FD1 in the basin were analyzed in terms of sedimentary facies, sequence stratigraphy, intraplatform shoal reservoir property, and oil and gas origins, based on drilling data. The Yingshan Formation intraplatform shoal between the main strike-slip faults is superimposed with low-order faults to form a new type of hydrocarbon play. Firstly, hydrocarbons generated from the Lower Cambrian Yuertusi Formation source rocks vertically migrated into the second member of Yingshan Formation through the main strike-slip faults, and then migrated laterally until they were accumulated. A small amount of oil from Well FD1 came from the Yuertusi Formation source rocks in the mature stage, and a large amount of gas originated from oil cracking in the ultra-deep reservoirs. Therefore, the secondary gas condensate reservoir in Well FD1 is characterized by high gas to oil ratio, dry gas (dryness coefficient being 0.970) and hybrid origin. This new type of hydrocarbon play characterized by intraplatform shoal and low-order fault suggests a prospect of continuous hydrocarbon-bearing area in Fuman Oilfield, which will expand the ultrap-deep oil and gas exploration in the oilfield.

Evaluation of reservoir environment by chemical properties of reservoir water‒A case study of Chang 6 reservoir in Ansai oilfield,Ordos Basin,China

The Ordos Basin is the largest continental multi-energy mineral basin in China,which is rich in coal,oil and gas,and uranium resources.The exploitation of mineral resources is closely related to reservoir water.The chemical properties of reservoir water are very important for reservoir evaluation and are significant indicators of the sealing of reservoir oil and gas resources.Therefore,the caprock of the Chang 6 reservoir in the Yanchang Formation was evaluated.The authors tested and analyzed the chemical characteristics of water samples selected from 30 wells in the Chang 6 reservoir of Ansai Oilfield in the Ordos Basin.The results show that the Chang 6 reservoir water in Ansai Oilfield is dominated by calcium-chloride water type with a sodium chloride coefficient of generally less than 0.5.The chloride magnesium coefficients are between 33.7 and 925.5,most of which are greater than 200.The desulfurization coefficients range from 0.21 to 13.4,with an average of 2.227.The carbonate balance coefficients are mainly concentrated below 0.01,with an average of 0.008.The calcium and magnesium coefficients are between 0.08 and 0.003,with an average of 0.01.Combined with the characteristics of the four-corner layout of the reservoir water,the above results show that the graphics are basically consistent.The study indicates that the Chang 6 reservoir in Ansai Oilfield in the Ordos Basin is a favorable block for oil and gas storage with good sealing properties,great preservation conditions of oil and gas,and high pore connectivity.

Geological characteristics of unconventional tight oil reservoir (10^(9) t): A case study of Upper Cretaceous Qingshankou Formation, northern Songliao Basin, NE China

The Daqing exploration area in the northern Songliao Basin has great potential for unconventional oil and gas resources,among which the total resources of tight oil alone exceed 109 t and is regarded as an important resource base of Daqing oilfield.After years of exploration in the Qijia area,Songliao Basin,NE China,tight oil has been found in the Upper Cretaceous Qingshankou Formation.To work out tight oil’s geological characteristics,taking tight oil in Gaotaizi oil layers of the Upper Cretaceous Qingshankou Formation in northern Songliao Basin as an example,this paper systematically analyzed the geological characteristics of unconventional tight oil in Gao3 and Gao4 layers of the Qijia area,based on the data of the geological survey,well drilling journey,well logging,and test.It is that three sets of hydrocarbon source rocks(K2qn1,K2qn2+3,and K2n1)develop in the examined area,and exhibit excellent type I and II kerogens,high organic matter abundance,and moderate maturity.The reservoir is generally composed of thin-bedded mudstone,siltstone,and sandstone,and presents poor porosity(average 8.5 vol.%)and air permeability(average 4 mD).The main reservoir space primarily includes intergranular pores,secondary soluble pores,and intergranular soluble pores.Three types of orifice throats were identified,namely fine throat,extra-fine throat,and micro-fine throat.The siltstone is generally oil-bearing,the reservoirs with slime and calcium become worse oil-bearing,and the mudstone has no obvious oil-bearing characteristics.The brittleness indices of the sandstone in the tight oil reservoir range from 40%to 60%,and those of the mudstone range from 40%to 45%,indicating a better brittleness of the tight oil reservoir.Based on the study of typical core hole data,this paper gives a comprehensive evaluation of the properties of the tight oil and establishes a tight oil single well composite bar chart as well as the initial evaluation system with the core of properties in the tight oil reservoir.This study has theoretical guiding significance and practical application value for tight oil exploration and evaluation in the Qijia area.

Burial Dissolution of Ordovician Granule Limestone in the Tahe Oilfield of the Tarim Basin,NW China,and Its Geological Significance

With a comprehensive study on the petrology, geology and geochemistry of some Ordovician granule limestone samples in the Tahe Oiifieid of the Tarim Basin, two stages of burial dissolution were put forward as an in-source dissolution and out-source dissolution based on macro-microcosmic petrology and geochemistry features. The main differences in the two stages are in the origin and moving pass of acid fluids. Geochemical evidence indicates that burial dissolution fluids might be ingredients of organic acids, CO2 and H2S associated with organic matter maturation and hydrocarbon decomposition, and the in-source fluid came from organic matter in the granule limestone itself, but the out-source was mainly from other argillaceous carbonate rocks far away. So, the forming of a burial dissolution reservoir resulted from both in-source and the out-source dissolutions. The granule limestone firstly formed unattached pinholes under in-source dissolution in situ, and afterwards suffered wider dissolution with out-source fluids moving along unconformities, seams, faults and associate fissures. The second stage was much more important, and the mineral composition in the stratum and heat convection of the fluid were also important in forming favorable reservoirs.

Distribution and treatment of harmful gas from heavy oil production in the Liaohe Oilfield, Northeast China

The distribution and treatment of harmful gas （H2S） in the Liaohe Oilfield, Northeast China, were investigated in this study. It was found that abundant toxic gas （H2S） is generated in thermal recovery of heavy oil. The H2S gas is mainly formed during thermochemical sulfate reduction （TSR） occurring in oil reservoirs or the thermal decomposition of sulfocompounds （TDS） in crude oil. H2S generation is controlled by thermal recovery time, temperature and the injected chemical compounds. The quantity of SO4^2- in the injected compounds is the most influencing factor for the rate of TSR reaction. Therefore, for prevention of H2S formation, periodic and effective monitoring should be undertaken and adequate H2S absorbent should also be provided during thermal recovery of heavy oil. The result suggests that great efforts should be made to reduce the SO4^2- source in heavy oil recovery, so as to restrain H2S generation in reservoirs. In situ burning or desulfurizer adsorption are suggested to reduce H2S levels. Prediction and prevention of H2S are important in heavy oil production. This will minimize environmental and human health risks, as well as equipment corrosion.

Types of Karst-fractured and Porous Reservoirs in China's Carbonates and the Nature of the Tahe Oilfield in the Tarim Basin

Almost all the oil and gas reservoirs developed in marine sedimentary strata of China have undergone processes of multi-phase reservoir formation and later modification. The irregular reservoirs are classified into three types as the Naxi, Tahe and Renqiu ones, increasing successively in the development degree of karstificated pores and fissures and the connection degree of independent reservoirs. In these reservoirs, the unity in the fluid feature, pressure and oil-gas-water interface also increases successively from the Naxi to the Renqiu type. The main body of Ordovician reservoirs of the Tahe Oilfield in the Tarim Basin is a network pool rather than a stratified, massive, stratigraphically-unconformed or weathering-crust one. The fluid nature of oil, gas and water, the interface positions and the pressures, as well as the dynamic conditions of fluids within the reservoirs during the production are all different from those in stratified or massive oil and gas reservoirs. Carbonates in the Akekule uplift and the Tahe Oilfield are assemblages of various types of reservoirs, which have an overall oil-bearing potential and obvious uneven distribution. Testing and producing tests are the major means to evaluate this type of reservoirs and acid fracturing improvement is a key link in petroleum exploration and development.

Corrosion Behaviors of P110 Steel and Chromium Coating in CO_2-saturated Simulated Oilfield Brine

The protective chromium coating was prepared on P110 steel by employing pack cementation.The corrosion behaviors of P110 steel and the obtained coating in CO2-saturated simulated oilfield brine were studied by static complete immersion tests and electrochemical measurements.The corrosion attacks of the samples were determined by mass loss,corroded surface morphologies,corrosion products,and results of electrochemical measurements.The experimental results showed that the coating was uniform,continuous and compact.The chromium coating was slightly corroded,and the mass loss and corrosion rate of the coating were far lower than those of P110 steel.Chromium coating has higher self-corroding potential and lower corrosion current density than P110 steel in accordance with the electrochemical tests results.Taken as a whole,chromizing treatment has significantly improved the corrosion resistance of P110 steel.

Reservoir characterization of the Odovician oil and gas pools in the Tahe Oilfield, Tarim Basin, Northwest China

About 88. 1% of the proven reserves in the Tahe Oilfield in the Tarim Basin of Northwest China are trapped in Ordovician carbonate reservoirs. These reservoirs are formed by unconnected and interconnected networks of karstic porosity forming a heterogeneous and complex reservoir system. Oil, water and gas characteristics vary significantly in different portions of the Ordovician reservoir. There is no uniform oil/water contact in the field, adding to its complexity.An acid fracture treatment is beneficial in 76% of the wells, stimulating nonproductive wells and enhancing production in other wells by fracturing into unconnected reservoirs and enhancing flow pathways with acid. Acid fracture treatments should be a standard procedure for developing this and similar oil fields.

Incised valley filling deposits:an important pathway system for long-distance hydrocarbon migration—a case study of the Fulaerji Oilfield in the Songliao Basin

In this paper, incised valley filling deposits, which formed an important pathway system for long-distance hydrocarbon migration, are discussed in detail based on core and logging data. The sequence SQy23 of the Cretaceous Yaojia Formation is the main hydrocarbon-bearing layer in the Fulaerji Oilfield. The hydrocarbon source of the oilfield is the Qijia-Gulong Sag which is about 80 km away from the Fulaerji Oilfield. The transport layer of long-distance hydrocarbon migration is the overlapped sandstone complex which fills the incised valley. The incised valley developed during the depositional period from the late Qingshankou Formation to the early Yaojia Formation of Cretaceous （SQqna-SQy0 was about 70 km long and 20 km wide, and extended in the NW-SE direction. The overlapped filling of the incised valley mainly occurred in the expanding system tract of the third-order sequence SQy23 （ESTy23）. Towards the basin, incised valley filling deposits overlapped on the delta developed in the early period, and towards the basin margin, incised valley filling deposits were covered by the shore-shallow lacustrine sandy beach bar developed in the maximum flooding period. All of the delta, the incised valley filling and the shore-shallow sandy beach bar are sandstone-rich, and have high porosity and permeability, and can form an effective hydrocarbon migration and accumulation system. Deltaic sand bodies collected and pumped hydrocarbon from the active source, incised valley filling depositional system completed the long-distance hydrocarbon migration, and lithological traps of shore-shallow lacustrine sandy beach bar accumulated hydrocarbon. The incised valley filling sequences are multi-cycle： an integrated shortterm filling cycle was developed on the erosion surface, and the sequences upward were mud-gravel stone, medium-fine sandstone containing terrigenous gravels and muddy pebbles with cross bedding, silty mudstone with ripple bedding, and mudstone. The incised valley filling deposits are characterized by a strong heterogeneity and the main hydrocarbon migration pathway is the medium-fine sandstone interval.

Micro-geological causes and macro-geological controlling factors of low-resistivity oil layers in the Puao Oilfield

Low-resistivity oil layers are often missed in logging interpretation because of their resistivity close to or below the resistivity of nearby water layers. Typical low-resistivity oil layers have been found in the past few years in the Putaohua reservoir of the Puao Oilfield in the south of the Daqing placanticline by detailed exploration. Based on a study of micro-geological causes of low-resistivity oil layers, the macro-geological controlling factors were analyzed through comprehensive research of regional depositional background, geological structure, and oil-water relations combined with core, water testing, well logging, and scanning electron microscopy data. The results showed that the formation and distribution of Putaohua low-resistivity oil layers in the Puao Oilfield were controlled by depositional environment, sedimentary facies, diagenesis, motive power of hydrocarbon accumulation, and acidity and alkalinity of reservoir liquid. The low-resistivity oil layers caused by high bound-water saturation were controlled by deposition and diagenesis, those caused by high free-water saturation were controlled by structural amplitude and motive power of hydrocarbon accumulation. Those caused by formation water with high salinity were controlled by the ancient saline water depositional environment and faulted structure and those caused by additional conductivity of shale were controlled by paleoclimate and acidity and alkalinity of reservoir liquid. Consideration of both micro-geological causes and macro-geological controlling factors is important in identifying low-resistivity oil layers.

Distribution of the Ordovician Fluid in the Tahe Oilfield and Dynamic Response of Cave System S48 to Exploitation

The Tahe Oilfield is a complex petroleum reservoir of Ordovician carbonate formation and made up of spatially overlapping fracture-cavity units. The oilfield is controlled by a cave system resulting from structure-karst cyclic sedimentation. Due to significant heterogeneity of the reservoir, the distribution of oil and water is complicated. Horizontally, a fresh water zone due to meteoric water can be found in the north part of the Akekule uplift. A marginal freshening zone caused by water released from mudstone compaction is found at the bottom of the southern slope. Located in a crossformational flow discharge zone caused by centripetal and the centrifugal flows, the main part of the Tahe Oilfield, featuring high salinity and concentrations of CI^- and K^＋＋Na^＋, is favorable for accumulation of hydrocarbon. Three types of formation water in the Tahe Ordovician reservoir are identified： （1） residual water at the bottom of the cave after oil and gas displacement, （2） residual water in fractures/pores around the cave after oil and gas displacement, and （3） interlayer water below reservoirs. The cave system is the main reservoir space, which consists of the main cave, branch caves and depressions between caves. Taking Cave System S48 in the Ordovician reservoir as an example, the paper analyzes the fluid distribution and exploitation performance in the cave system. Owing to evaporation of groundwater during cross-formational flow, the central part of the main cave, where oil layers are thick and there is a high degree of displacement, is characterized by high salinity and Br^- concentration. With high potential and a long stable production period, most wells in the central part of the main cave have a long water-free oil production period. Even after water breakthrough, the water content has a slow or stepwise increase and the hydrochemistral characteristics of the produced water in the central part of the main cave are uniform. From the center to the edge of the main cave, displacement and enrichment of oil/gas become weaker, residual water increases, and the salinity and concentration of Br^- decrease. At the edge of the main cave, although the wells have a high deliverability at the beginning with a short stable production period and water-free production period. After water breakthrough, the pressure and deliverability drop quickly, and the water content rises quickly. The hydrochemistral characteristics of the produced water are relatively uniform. Wells in the branch caves have a relatively low deliverability at the beginning, with a short stable production period. Water breakthrough appears quickly and then the pressure and deliverability drop quickly. The salinity and concentrations of CI^-and K^＋＋Na^＋ are usually fluctuant or descend slowly in the produced water. Wells in low areas of ancient karst have a low deliverability and a short stable production period. The yield drops quickly and the water content is high, while the characteristics of the produced water may vary significantly well to well. The salinity and concentrations of CI^-and K^＋＋Na^＋ in the produced water are usually fluctuant with a precipitous decline.

Diagenetic and Depositional Impacts on the Reservoir Quality of the Upper Jurassic Arab Formation in the Balal Oilfield, Offshore Iran

The Kimmeridgian-Tithonian aged Arab Formation, as the main reservoir of the Jurassic succession in the Balal oilfield, located in the offshore region of the Iranian sector of the Persian Gulf, is investigated in this study. The formation is composed of dolomites and limestones with anhydrite interbeds. Based on detailed petrographic studies, six microfacies are recognized, which are classified in four sub-environments including supratidal, intertidal, lagoonal and the high energy shoal of a homoclinal carbonate ramp. The main diagenetic features of the studied succession include dolomitization, anhydritization, cementation, micritization, fracturing and compaction. Based on stable isotope data, dolomitization of the upper Arab carbonates is related to sabkha settings （i.e. evaporative type）. In terms of sequence stratigraphy, three shallowing-upward sequences are recognized, based on core and wireline log data from four wells of the studied field. Considering depositional and diagenetic effects on the reservoir quality, the studied facies are classified into eight reservoir rock types （RRT） with distinct reservoir qualities. Dolomitization has played a major role in reservoir quality enhancement, whereas anhydritization, carbonate cementation, and compaction have damaged the pore throat network. Distribution of the recognized RRTs in time and space are discussed within the context of a sequence stratigraphic framework.

Geological Model of Member 3 of Shahejie Formation Reservoir in Liuzan Oilfield, Eastern Hebei Province

A new geological model of Member 3 of Shahejie Formation reservoir in the Liuzan Oilfield, eastern Hebei Province was constructed by using modem reservoir modeling technology as sequence stratigraphy and conditional simulation combined with traditional geological analysis. The model consists of a stratigraphic framework model, a structural model, a sedimentary model and a reservoir model. The study shows that the reservoir is a relatively integrated nose structure, whose strata can be divided into 4 sets of parasequence, 12 parasequences. The submerged branched channel of fan delta front is the favorable microfacies, which controls the geometric shape and physical properties of reservoir sandstone. Oil is distributed in premium reservoir sandstones at structural high positions. According to the new geological model, not only the geological contradictions appearing during oil field development are resolved, but also the oil-bearing area is enlarged by 2.7km^2 and geological reserves increased by 156.9 million tons. The production capacity of the Liuzan Oilfield is increased by 0.27 million tons per year.

Hydrocarbon Inclusion Characteristics in the Cambrian-Ordovician Carbonates of the TS2 Well:Implication for Deep Hydrocarbon Exploration in the Tahe Oilfield,Tarim Basin,Northwest China

Going deep has been the strategy for the sustainable development of the Tahe Oilfield.Following the TS1 well in block 1,which revealed excellent combinations of hydrocarbon generation,migration and accumulation in the deeper parts of the Tarim Basin,the TS2 well was drilled to learn more about the prospectivity in the deeper parts of the main blocks of the Tahe Oilfield.Seventeen core samples were collected to perform fluid inclusion studies,including petrography,fluorescence microspectrometry,and microthermometry.The results show that the deeper parts of the Tahe Oilfield have a good hydrocarbon potential.The Cambrian source rocks can supply sufficient oil for not only the Cambrian reservoirs,but also for the Lower Ordovician reservoirs.The CambrianOrdovician carbonates reservoirs experienced at least three oil charging events and one late gas charging event.Oil accumulations formed in the early stage of basin evolution were likely destroyed in the late stage with deep burial,tectonic movements,or invasion of hydrothermal fluids.Therefore,the deep hydrocarbon exploration of the Tahe Oilfield,even the whole Tarim Basin,should focus on gas accumulations,although oil accumulations,especially in Cambrian reservoirs,cannot be neglected.

Assessing Lateral Continuity within the Yammama Reservoir in the Foroozan Oilfield, Offshore Iran: An Integrated Study

Located in Iranian sector of the Persian Gulf, Foroozan Oilfield has been producing hydrocarbons via seven different reservoirs since the 1970 s. However, understanding fluid interactions and horizontal continuity within each reservoir has proved complicated in this field. This study aims to determine the degree of intra-reservoir compartmentalization using gas geochemistry, light hydrocarbon components, and petroleum bulk properties, comparing the results with those obtained from reservoir engineering indicators. For this purpose, a total of 11 samples of oil and associated gas taken from different producing wells in from the Yammama Reservoir were selected. Clear distinctions, in terms of gas isotopic signature and composition, between the wells located in northern and southern parts of the reservoir(i.e. lighter δ13 C1, lower methane concentration, and negative sulfur isotope in the southern part) and light hydrocarbon ratios(e.g. nC 7/toluene, 2,6-dmC7/1,1,3-tmcyC5 and m-xylene/4-mC8) in different oil samples indicated two separate compartments. Gradual variations in a number of petroleum bulk properties(API gravity, V/Ni ratios and asphaltene concentration) provided additional evidence on the reservoir-filling direction, signifying that a horizontal equilibrium between reservoir fluids across the Yammama Reservoir is yet to be achieved. Finally, differences in water-oil contacts and reservoir types further confirmed the compartmentalization of the reservoir into two separate compartments.

Non-target Screening and Quantitation of Organic Chlorides in Oilfield Chemicals with Comprehensive Two Dimensional Gas Chromatography Coupled with Time of Flight Mass Spectrometry

Advanced analytical methodology based on comprehensive two-dimensional gas chromatography-time of flight mass spectrometry(GC×GC-TOFMS) is proposed for investigation of organic chlorides in different oilfield chemicals.The target screening was initially carried out on 8 suspected organic chlorides by evaluating the capability of the enhanced separation and reliable identification at a trace concentration. GC×GC-TOFMS allowed for the fast and automated analysis of organic chlorides at a level of 200 μg/L. This method was subsequently applied for non-target screening of organic chlorides in different oilfield chemicals at various locations across China. 22 organic chlorides were identified and verified by comparison with pure standards in the mixed sample. Finally, this method was used to determine the content of the organic chlorides in individual samples. The result showed that the organic chloride levels in 19 of the 39 tested oilfield chemicals were above the threshold limit of 1.0 mg/L.

New progress and prospect of oilfields development technologies in China

As technologies advance in oilfield development, mature oilfields are able to keep sustainable production and complex oilfields difficult to produce in the past are put into production efficiently. In this work, new progresses of main development technologies for medium-high permeability and high water cut, low permeability, heavy oil, complex faulted block and special lithology reservoirs in the past decade, especially those international achievements made in enhanced oil recovery, were summarized, the key problems and major challenges that different oilfields are facing were analyzed, and the development route and direction of three-generation technologies were proposed as "mature technology in industrialized application, key technology in pilot test and innovative technology for backup". The key research contents should focus on:(1) Fine water flooding and chemical flooding for mature oilfields, improving oil recovery after chemical flooding, and gas flooding for low permeability reservoirs must be researched and tested in field further.(2) Study on subversive technologies like nanometer smart flooding, in-situ upgrading and injection and production through the same well should be strengthened.(3) EOR technologies for low oil price, new fields(deep sea, deep layer, unconventional reservoirs etc.) and highly difficult conditions(the quaternary recovery after chemical flooding, tertiary recovery in ultra-low permeability reservoirs) should be stocked up in advance. The development cost must be lowered significantly through constant innovation in technology and reservoir management to realize sustainable development of oilfields.