[Objectives]To establish the quality standard of hospital preparation Jiedu Shengxue granules.[Methods]Scleromitrion diffusum and Prunella vulgaris in Jiedu Shengxue granules were qualitatively identified by thin laye...[Objectives]To establish the quality standard of hospital preparation Jiedu Shengxue granules.[Methods]Scleromitrion diffusum and Prunella vulgaris in Jiedu Shengxue granules were qualitatively identified by thin layer chromatography(TLC).A high performance liquid chromatography(HPLC)was established to determine the content of notoginsenoside R1 in the granule.[Results]The traditional Chinese medicinal materials in Jiedu Shengxue granules could be identified by TLC,and the characteristic spots were stable and clear.Notoginsenoside R1 had a good linear relationship in the range of 10.45-104.5μg/mL,with an average recovery of 98.52%and RSD=2.36%.[Conclusions]TLC and HPLC,as the quality control methods of Jiedu Shengxue granules,have high accuracy and good repeatability,which lays a foundation for the quality control of this mixture.展开更多
1-Tetralone, a useful synthetic intermediate in the manufacture of pharmaceuticals, agrochemicals and dyes, can be prepared by liquid phase catalytic oxidation of tetralin. Selective oxidation of tetralin to 1-tetralo...1-Tetralone, a useful synthetic intermediate in the manufacture of pharmaceuticals, agrochemicals and dyes, can be prepared by liquid phase catalytic oxidation of tetralin. Selective oxidation of tetralin to 1-tetralone is still a big challenge with low-temperature processes using environmentally friendly routes even after decades of research. Herein, we demonstrate room-temperature oxidation of tetralin to 1-tetralone over layered double hydroxide-hosted sulphonato-salen-nickel(II) complex, LDH-[Ni-salen]. The layered double hydroxide-hosted sulphonato-salen-nickel(II) compound was characterized by powder X-ray diffraction, Fourier transform infrared spectrometer (FTIR), UV-Visible diffuse reflectance spectra, scanning electron microscopy (SEM) and elemental analysis. The theoretical calculations of free sulphonato-salen-nickel(II) complex using Density Functional Theory/CAM-B3LYP at the 6-311++ G(d,p) level of theory were also used to determine the orientation of the Ni-salen compound within the layered structure. The immobilized compound, LDH-[Ni-salen] was found to be an effective reusable catalyst for the oxidation of tetralin to 1-tetralone using a combination of trimethylacetaldehyde and molecular oxygen (14.5 psi) and at 25°C. At 45.5% conversion, tetralin was converted to 1-tetralone with 77.2% selectivity at room temperature and atmospheric pressure after 24 h. The catalyst recycles test and hot filtration experiment showed that oxidation proceeded through Ni(II) sites in LDH-[Ni-salen]. The catalysts were reused several times without losing their catalytic activity and selectivity. The present results may provide a convenient strategy for the preparation of 1-tetralone using layered double hydroxide-based heterogeneous catalyst at ambient temperature for industrial application in near future.展开更多
In this research,two shake table experiments were conducted to study the effects of non-liquefiable crust layer and superstructure mass on the responses of two sets of 22 pile groups to liquefactioninduced lateral spr...In this research,two shake table experiments were conducted to study the effects of non-liquefiable crust layer and superstructure mass on the responses of two sets of 22 pile groups to liquefactioninduced lateral spreading.In this regard,an inclined base layer overlain by a very loose liquefiable layer was constructed in both models;while only in one model,a non-liquefiable crust layer was built.A lumped mass,being representative of a superstructure,was attached to the cap of one pile group in both models.The models were fully instrumented with various sensors,including acceleration,displacement,and pore water pressure transducers.Also,the piles were instrumented with pair strain gauges to measure pure bending moments induced by cyclic and monotonic loadings associated with ground shaking and lateral spreading,respectively.The results showed that the existence of the non-liquefiable crust layer increases both the maximum and residual soil displacements at the free field and also the maximum bending moments in the piles.The results of the experiments indicated that the crust layer induces a high kinematic lateral soil pressure and force on the piles which are not present in the crustless case.The crust layer increases the pile cap displacement before liquefaction,albeit decreases it after liquefaction,due to the elastic rebound of the piles in the liquefiable layer.The crust layer postpones both liquefaction triggering and dissipation of excess pore water pressure.The existence of the superstructure mass on the pile caps decreases the acceleration amplitude of the pile caps,while increases their maximum displacement.展开更多
In copper oxide (CuO) based solar cells, various buffer layers such as CdS, In<sub>2</sub>S<sub>3</sub>, WS<sub>2</sub> and IGZO have been investigated by solar cell capacitance sim...In copper oxide (CuO) based solar cells, various buffer layers such as CdS, In<sub>2</sub>S<sub>3</sub>, WS<sub>2</sub> and IGZO have been investigated by solar cell capacitance simulator (SCAPS) in this work. By varying absorber and buffer layer thickness, photovoltaic parameters (open circuit voltage, fill factor, short-circuit current density and efficiency) are determined. The highest efficiency achieved is 19.6% with WS<sub>2</sub> buffer layer. The impact of temperature on all CuO-based solar cells is also investigated.展开更多
High-quality MgxZn1-xO thin films were grown on sapphire（0001 ） substrates with a ZnO buffer layer of different thicknesses by means of metal-organic chemical vapor deposition. Diethyl zinc, bis-cyclopentadienyl-Mg ...High-quality MgxZn1-xO thin films were grown on sapphire（0001 ） substrates with a ZnO buffer layer of different thicknesses by means of metal-organic chemical vapor deposition. Diethyl zinc, bis-cyclopentadienyl-Mg and oxygen were used as the precursor materials. The crystalline quality, surface morphologies and optical properties of the Mg, Zn1-xO films were investigated by X-ray diffraction, atomic force microscopy and photoluminescence spectrometry. It was shown that the quality of the MgxZn1-xO thin films depends on the thickness of the ZnO buffer layer and an Mg, Zn1-xO thin film with a ZnO buffer layer whose thickness was 20 nm exhibited the best crystal-quality, optical properties and a flat and dense surface.展开更多
A new ion-pair complex, [BzMeQ1]2[Ni（nmt）2]1（[BzMeQ1]^＋ = 1-benzyl-4-ntethylquino- linium, mnta- -- maleonitriledithiolate） has been synthesized and structurally characterized by IR, ESI-MS and X-ray diffraction ...A new ion-pair complex, [BzMeQ1]2[Ni（nmt）2]1（[BzMeQ1]^＋ = 1-benzyl-4-ntethylquino- linium, mnta- -- maleonitriledithiolate） has been synthesized and structurally characterized by IR, ESI-MS and X-ray diffraction methods. Complex 1 is of triclinic, space group PI, with a = 9.079（2）, b = 10.154（2）, c = 11.243（2）A, α= 81.58（1）, β= 69.63（1）, γ = 68.02（1）°, V= 940.1（3）A3, Dc = 1.427 g/cm^3, Z = 1, F（000） = 418 and R = 0.0442. A 2D layer structure is formed via the cation-cation π…π and C-H…π interactions observed in the solid state of the complex.展开更多
ZnTe, CdTe, and the ternary alloy CdZnTe are important semiconductor materials used widely for the detection of an important range of electromagnetic radiation as gamma ray and X-ray. Although, recently these material...ZnTe, CdTe, and the ternary alloy CdZnTe are important semiconductor materials used widely for the detection of an important range of electromagnetic radiation as gamma ray and X-ray. Although, recently these materials have acquired renewed importance due to the new explored nanolayer properties of modern devices. In addition, as shown in this work they can be grown using uncomplicated synthesis techniques based on the deposition in vapour phase of the elemental precursors. This work presents the results obtained from the deposition of nanolayers of these materials using the precursor vapour on GaAs and GaSb (001) substrates. This growth technique, extensively known as atomic layer deposition (ALD), allows the layers growth with nanometric dimension. The main results presented in this work are the used growth parameters and the results of the structural characterization of the layers by the means of Raman spectroscopy measurements. Raman scattering shows the peak corresponding to longitudinal optical (LO)-ZnTe, which is weak and slightly redshift in comparison with that reported for the ZnTe bulk at 210 cm^-1. For the case of the CdTe nanolayer, Raman spectra presented the LO-CdTe peak, which is indicative of the successful growth of the layer. Its weak and slightly redshift in comparison with that reported for the CdTe bulk can be related with the nanometric characteristic of this layer. The performed high-resolution X-ray diffraction (HR-XRD) measurement allows to study some important characteristics such as the crystallinity of the grown layer. In addition, the HR-XRD measurement suggests that the crystalline quality has dependence on the growth temperature.展开更多
A new coordination polymer [Cd（bimc）2]n was obtained by the reaction of Hbimc with Cd（NO3） 2·4H2O in NaOH solution, and characterized by elemental analysis, IR and singlecrystal X-ray diffraction. The crystal...A new coordination polymer [Cd（bimc）2]n was obtained by the reaction of Hbimc with Cd（NO3） 2·4H2O in NaOH solution, and characterized by elemental analysis, IR and singlecrystal X-ray diffraction. The crystal belongs to orthorhombic, space group Pbcn with a = 12.533（4）, b = 15.705（5）, c = 15.200（5） A, V= 2991.8（15） A^3, Mr = 434.68, Z = 8, Dc = 1.930 g/cm^3, F（000） = 1712,μ（MoKa） = 1.492 mm^-1, the final R = 0.0410 and wR = 0.0804 for 1661 observed reflections （I 〉 2σ（I））. The Cd atom exhibits a distorted six-coordinate CdNzOa octahedral coordination geometry. The complex molecules are linked by both μ2-（η2-O, O^-）, NI and μ2-（η2-O, O^-）, N3 coordination modes of ligands to form cross-like wave （4, 4） layer structures which are further stacked through interlayer hydrogen bonds and π-π stacking interactions in an offset fashion to form a 3D supramolecular structure.展开更多
A three-dimensional（3D） barium complex with 1,3,5-benzenetricarboxylic acid（H3BTC）, {[Ba1.5（BTC）（H2O）]·（H2O）}n（1）, was synthesized in DMF/EtOH/H2O mixed solution under solvothermal conditions, and cha...A three-dimensional（3D） barium complex with 1,3,5-benzenetricarboxylic acid（H3BTC）, {[Ba1.5（BTC）（H2O）]·（H2O）}n（1）, was synthesized in DMF/EtOH/H2O mixed solution under solvothermal conditions, and characterized by single-crystal X-ray diffraction, elemental analyses, IR spectra, thermogravimetric analyses, and photoluminescence measurement. In complex 1, the 2D I2O0 type inorganic layer is constructed by {Ba1O10} and {Ba2O9} polyhedra. Moreover, the solid-state fluorescence measurement reveals a fluorescence emission band at 465 nm under 344 nm excitation, assigned to a charge-transfer transition.展开更多
Ternary In-rich AlxIn1-x N films were successfully grown on Si （111） and （0001） sapphire substrates by radio-frequency magnetron sputtering on a relatively Al-rich AlxIn1-x N layer after AlN buffer. X-ray diffract...Ternary In-rich AlxIn1-x N films were successfully grown on Si （111） and （0001） sapphire substrates by radio-frequency magnetron sputtering on a relatively Al-rich AlxIn1-x N layer after AlN buffer. X-ray diffraction （XRD） patterns of the films indicate highly c axis-oriented wurtzite structure and the indium content of about 0.76 has been evaluated according to the Vegard＇s law. An Al-rich AlxIn1-xN transition layer was formed between the ultimate In-rich AlxIn1-x N film and the AlN buffer, which served as a further buffer to alleviate mismatch. X-ray photoelectron spectroscopy （XPS） depth profiling analyses confirm the alternative of indium and aluminum composition and the unavoidable oxygen impurities from surface to bulk. Owing to high indium content, obvious E2u and InN-like Al （LO） phonon model accompanying with slight A1N-like A1 （LO） phonon model are observed. Hall effect measurements demonstrate n-type electrical conductivity in these alloys with carrier concentrations n=1019 cm-3. The strain in In-rich AlxIn1-x N films can be significantly reduced by introducing an Al-rich interlayer, facilitating the improvement of film quality for diverse device applications.展开更多
With the Uddeholm self restricted method, the effect of compound layer of plasma nitriding on thermal fatigue behavior of 4Cr5MoSiV1 steel was studied by the way of adding Ar during plasma nitriding to remove the com...With the Uddeholm self restricted method, the effect of compound layer of plasma nitriding on thermal fatigue behavior of 4Cr5MoSiV1 steel was studied by the way of adding Ar during plasma nitriding to remove the compound layer. The results show that the compound layer of plasma nitriding can delay the nucleation of heat cracks and hold back the propagation of heat cracks from surface to substrate because of its high hardness and strength. On the other land, the heat checking expands faster with the compound layer on the surface than that without it. After 3000 cycles of thermal fatigue test, both heat cracks with the compound layer are wider than the another without compound layer and the number of heat cracks of the former is more from the view of cross section.展开更多
基金Supported by Guangxi Hospital Preparation Quality Improvement Project of Zhuang and Yao Ethnic Medicines(GZZJ202015)Key Research and Development Plan of Guangxi Department of Science and Technology(GK AB21196057)+3 种基金High-level TCM Key Discipline(Zhuang Pharmacology)Construction Project of State Administration of Traditional Chinese Medicine(GZYYRJH[2022]226)Guangxi TCM Multidisciplinary Innovative Team Project(GZKJ2309)"Qingmiao Engineering"Talent Cultivation Project of Guangxi International Zhuang Medical Hospital(2022001)"High-level Talent Cultivation and Innovation Team"Project of Guangxi University of Chinese Medicine(2022A008).
文摘[Objectives]To establish the quality standard of hospital preparation Jiedu Shengxue granules.[Methods]Scleromitrion diffusum and Prunella vulgaris in Jiedu Shengxue granules were qualitatively identified by thin layer chromatography(TLC).A high performance liquid chromatography(HPLC)was established to determine the content of notoginsenoside R1 in the granule.[Results]The traditional Chinese medicinal materials in Jiedu Shengxue granules could be identified by TLC,and the characteristic spots were stable and clear.Notoginsenoside R1 had a good linear relationship in the range of 10.45-104.5μg/mL,with an average recovery of 98.52%and RSD=2.36%.[Conclusions]TLC and HPLC,as the quality control methods of Jiedu Shengxue granules,have high accuracy and good repeatability,which lays a foundation for the quality control of this mixture.
文摘1-Tetralone, a useful synthetic intermediate in the manufacture of pharmaceuticals, agrochemicals and dyes, can be prepared by liquid phase catalytic oxidation of tetralin. Selective oxidation of tetralin to 1-tetralone is still a big challenge with low-temperature processes using environmentally friendly routes even after decades of research. Herein, we demonstrate room-temperature oxidation of tetralin to 1-tetralone over layered double hydroxide-hosted sulphonato-salen-nickel(II) complex, LDH-[Ni-salen]. The layered double hydroxide-hosted sulphonato-salen-nickel(II) compound was characterized by powder X-ray diffraction, Fourier transform infrared spectrometer (FTIR), UV-Visible diffuse reflectance spectra, scanning electron microscopy (SEM) and elemental analysis. The theoretical calculations of free sulphonato-salen-nickel(II) complex using Density Functional Theory/CAM-B3LYP at the 6-311++ G(d,p) level of theory were also used to determine the orientation of the Ni-salen compound within the layered structure. The immobilized compound, LDH-[Ni-salen] was found to be an effective reusable catalyst for the oxidation of tetralin to 1-tetralone using a combination of trimethylacetaldehyde and molecular oxygen (14.5 psi) and at 25°C. At 45.5% conversion, tetralin was converted to 1-tetralone with 77.2% selectivity at room temperature and atmospheric pressure after 24 h. The catalyst recycles test and hot filtration experiment showed that oxidation proceeded through Ni(II) sites in LDH-[Ni-salen]. The catalysts were reused several times without losing their catalytic activity and selectivity. The present results may provide a convenient strategy for the preparation of 1-tetralone using layered double hydroxide-based heterogeneous catalyst at ambient temperature for industrial application in near future.
基金support by the Construction and Development of Transportation Infrastructures Company affiliated with the Ministry of Roads and Urban Development of Iran and partial financial support granted by the Research Deputy of the Sharif University of Technology are acknowledged.
文摘In this research,two shake table experiments were conducted to study the effects of non-liquefiable crust layer and superstructure mass on the responses of two sets of 22 pile groups to liquefactioninduced lateral spreading.In this regard,an inclined base layer overlain by a very loose liquefiable layer was constructed in both models;while only in one model,a non-liquefiable crust layer was built.A lumped mass,being representative of a superstructure,was attached to the cap of one pile group in both models.The models were fully instrumented with various sensors,including acceleration,displacement,and pore water pressure transducers.Also,the piles were instrumented with pair strain gauges to measure pure bending moments induced by cyclic and monotonic loadings associated with ground shaking and lateral spreading,respectively.The results showed that the existence of the non-liquefiable crust layer increases both the maximum and residual soil displacements at the free field and also the maximum bending moments in the piles.The results of the experiments indicated that the crust layer induces a high kinematic lateral soil pressure and force on the piles which are not present in the crustless case.The crust layer increases the pile cap displacement before liquefaction,albeit decreases it after liquefaction,due to the elastic rebound of the piles in the liquefiable layer.The crust layer postpones both liquefaction triggering and dissipation of excess pore water pressure.The existence of the superstructure mass on the pile caps decreases the acceleration amplitude of the pile caps,while increases their maximum displacement.
文摘In copper oxide (CuO) based solar cells, various buffer layers such as CdS, In<sub>2</sub>S<sub>3</sub>, WS<sub>2</sub> and IGZO have been investigated by solar cell capacitance simulator (SCAPS) in this work. By varying absorber and buffer layer thickness, photovoltaic parameters (open circuit voltage, fill factor, short-circuit current density and efficiency) are determined. The highest efficiency achieved is 19.6% with WS<sub>2</sub> buffer layer. The impact of temperature on all CuO-based solar cells is also investigated.
文摘High-quality MgxZn1-xO thin films were grown on sapphire（0001 ） substrates with a ZnO buffer layer of different thicknesses by means of metal-organic chemical vapor deposition. Diethyl zinc, bis-cyclopentadienyl-Mg and oxygen were used as the precursor materials. The crystalline quality, surface morphologies and optical properties of the Mg, Zn1-xO films were investigated by X-ray diffraction, atomic force microscopy and photoluminescence spectrometry. It was shown that the quality of the MgxZn1-xO thin films depends on the thickness of the ZnO buffer layer and an Mg, Zn1-xO thin film with a ZnO buffer layer whose thickness was 20 nm exhibited the best crystal-quality, optical properties and a flat and dense surface.
基金the President's Science Foundation of South China Agricultural University (No. 2005K092)
文摘A new ion-pair complex, [BzMeQ1]2[Ni（nmt）2]1（[BzMeQ1]^＋ = 1-benzyl-4-ntethylquino- linium, mnta- -- maleonitriledithiolate） has been synthesized and structurally characterized by IR, ESI-MS and X-ray diffraction methods. Complex 1 is of triclinic, space group PI, with a = 9.079（2）, b = 10.154（2）, c = 11.243（2）A, α= 81.58（1）, β= 69.63（1）, γ = 68.02（1）°, V= 940.1（3）A3, Dc = 1.427 g/cm^3, Z = 1, F（000） = 418 and R = 0.0442. A 2D layer structure is formed via the cation-cation π…π and C-H…π interactions observed in the solid state of the complex.
文摘ZnTe, CdTe, and the ternary alloy CdZnTe are important semiconductor materials used widely for the detection of an important range of electromagnetic radiation as gamma ray and X-ray. Although, recently these materials have acquired renewed importance due to the new explored nanolayer properties of modern devices. In addition, as shown in this work they can be grown using uncomplicated synthesis techniques based on the deposition in vapour phase of the elemental precursors. This work presents the results obtained from the deposition of nanolayers of these materials using the precursor vapour on GaAs and GaSb (001) substrates. This growth technique, extensively known as atomic layer deposition (ALD), allows the layers growth with nanometric dimension. The main results presented in this work are the used growth parameters and the results of the structural characterization of the layers by the means of Raman spectroscopy measurements. Raman scattering shows the peak corresponding to longitudinal optical (LO)-ZnTe, which is weak and slightly redshift in comparison with that reported for the ZnTe bulk at 210 cm^-1. For the case of the CdTe nanolayer, Raman spectra presented the LO-CdTe peak, which is indicative of the successful growth of the layer. Its weak and slightly redshift in comparison with that reported for the CdTe bulk can be related with the nanometric characteristic of this layer. The performed high-resolution X-ray diffraction (HR-XRD) measurement allows to study some important characteristics such as the crystallinity of the grown layer. In addition, the HR-XRD measurement suggests that the crystalline quality has dependence on the growth temperature.
基金This work was supported by the NNSFC (No. 30460153 20561001), NSF of Guangxi Province (No. 0447019), and the Teaching and Research Award Program for Outstanding Young Teachers in Higher Education Institutions of Chinese Ministry of Education
文摘A new coordination polymer [Cd（bimc）2]n was obtained by the reaction of Hbimc with Cd（NO3） 2·4H2O in NaOH solution, and characterized by elemental analysis, IR and singlecrystal X-ray diffraction. The crystal belongs to orthorhombic, space group Pbcn with a = 12.533（4）, b = 15.705（5）, c = 15.200（5） A, V= 2991.8（15） A^3, Mr = 434.68, Z = 8, Dc = 1.930 g/cm^3, F（000） = 1712,μ（MoKa） = 1.492 mm^-1, the final R = 0.0410 and wR = 0.0804 for 1661 observed reflections （I 〉 2σ（I））. The Cd atom exhibits a distorted six-coordinate CdNzOa octahedral coordination geometry. The complex molecules are linked by both μ2-（η2-O, O^-）, NI and μ2-（η2-O, O^-）, N3 coordination modes of ligands to form cross-like wave （4, 4） layer structures which are further stacked through interlayer hydrogen bonds and π-π stacking interactions in an offset fashion to form a 3D supramolecular structure.
基金Supported by the Fundamental Research Funds for the Central Universities(13CX02006A,14CX02158A)the scientific research foundation of Shandong province Outstanding Young Scientist Award(BS2011CL041)Natural Science Foundation of Shandong Province(ZR2010BL011)
文摘A three-dimensional（3D） barium complex with 1,3,5-benzenetricarboxylic acid（H3BTC）, {[Ba1.5（BTC）（H2O）]·（H2O）}n（1）, was synthesized in DMF/EtOH/H2O mixed solution under solvothermal conditions, and characterized by single-crystal X-ray diffraction, elemental analyses, IR spectra, thermogravimetric analyses, and photoluminescence measurement. In complex 1, the 2D I2O0 type inorganic layer is constructed by {Ba1O10} and {Ba2O9} polyhedra. Moreover, the solid-state fluorescence measurement reveals a fluorescence emission band at 465 nm under 344 nm excitation, assigned to a charge-transfer transition.
基金Supported by the 863 High-Technology Research and Development Program of China(No.2009AA03Z442)the National Natural Science Foundation of China(No.61077074)the Science and Technology Department of Jilin Province(No.20090422)
文摘Ternary In-rich AlxIn1-x N films were successfully grown on Si （111） and （0001） sapphire substrates by radio-frequency magnetron sputtering on a relatively Al-rich AlxIn1-x N layer after AlN buffer. X-ray diffraction （XRD） patterns of the films indicate highly c axis-oriented wurtzite structure and the indium content of about 0.76 has been evaluated according to the Vegard＇s law. An Al-rich AlxIn1-xN transition layer was formed between the ultimate In-rich AlxIn1-x N film and the AlN buffer, which served as a further buffer to alleviate mismatch. X-ray photoelectron spectroscopy （XPS） depth profiling analyses confirm the alternative of indium and aluminum composition and the unavoidable oxygen impurities from surface to bulk. Owing to high indium content, obvious E2u and InN-like Al （LO） phonon model accompanying with slight A1N-like A1 （LO） phonon model are observed. Hall effect measurements demonstrate n-type electrical conductivity in these alloys with carrier concentrations n=1019 cm-3. The strain in In-rich AlxIn1-x N films can be significantly reduced by introducing an Al-rich interlayer, facilitating the improvement of film quality for diverse device applications.
文摘With the Uddeholm self restricted method, the effect of compound layer of plasma nitriding on thermal fatigue behavior of 4Cr5MoSiV1 steel was studied by the way of adding Ar during plasma nitriding to remove the compound layer. The results show that the compound layer of plasma nitriding can delay the nucleation of heat cracks and hold back the propagation of heat cracks from surface to substrate because of its high hardness and strength. On the other land, the heat checking expands faster with the compound layer on the surface than that without it. After 3000 cycles of thermal fatigue test, both heat cracks with the compound layer are wider than the another without compound layer and the number of heat cracks of the former is more from the view of cross section.
