A comprehensive discussion on the deep seated genesis of gold metallogenic materials and the tectono magmatic controls over gold deposits is given in this paper, which is based on the crustal and upper mantle struct...A comprehensive discussion on the deep seated genesis of gold metallogenic materials and the tectono magmatic controls over gold deposits is given in this paper, which is based on the crustal and upper mantle structural characteristics of the Jiaodong massif, the property, activation history and styles of the Tancheng Lujiang fault zone, as well as a series of accompanying tectono magmatic events. Prediction for further prospecting gold deposits in the area is also made.展开更多
The Sichuan-Yunnan Block(SYB)is located at the SE margin of the Qinghai-Tibetan Plateau(TP).Under the influence of the southeastward movement of material originated from the TP,intense crustal deformation,frequent sei...The Sichuan-Yunnan Block(SYB)is located at the SE margin of the Qinghai-Tibetan Plateau(TP).Under the influence of the southeastward movement of material originated from the TP,intense crustal deformation,frequent seismic activity,and complex geological structures are observed in the SYB.The Lijiang-Xiaojinhe fault(LXF)goes through the central part of the SYB,dividing it into two blocks from north to south,and forming an intersecting fault system with the surrounding faults.This paper firstly introduces the morphology and the nature of the LXF,the distribution of the regional surface displacements and the focal mechanisms,and then analyzes the medium deformation and the effects of faults.Moreover,according to the regional tectonics and geophysical patterns,the paper discusses the characteristics of the north-south blocks of the SYB and the abrupt change of deep structure along the LXF zone.Since seismic anisotropy is an essential property for detecting crustal stress,deep structures and dynamical mechanisms,this paper is dedicated to the advances in seismic anisotropy at different depths and different scales in the study area.There are noteworthy differences in the anisotropic features between the north part and the south part of the SYB,possibly associated with a clear boundary adjacent to the LXF.Such phenomenon suggests some close correlation between anisotropic zoning boundary and the LXF,although this boundary is not consistent with the LXF in strike.The results from the deformation of the crust and the upper mantle elucidate the distribution patterns of the crust-mantle coupling in the north part and the crustmantle decoupling in the south part,even though this conclusion needs to be further verified by more studies.Presently,the scientific understanding of the deep tectonics and the media deformation around the“generalized”LXF i.e.the LXF with the Jinpingshan fault on its eastern side,is still insufficient,and related equivocal topics deserve more in-depth studies.展开更多
Based on the integrative interpretation of travel-time data and amplitude information obtained from the deep seismic sounding experiment on the Chuxiong-Luoping profile, eastern Yunnan province, carried out in January...Based on the integrative interpretation of travel-time data and amplitude information obtained from the deep seismic sounding experiment on the Chuxiong-Luoping profile, eastern Yunnan province, carried out in January of 2005, we present a 2-D P wave velocity structure along the profile. The crustal structure shows remarkable contrasts between the two sides of the Xiaojiang fault zone, although the whole profile is situated within the Yangtze platform. The average P wave velocities of the crust on the west and east sides of the fault zone are 6.21 km/s and 6.32 km/s, respectively, and the crustal thicknesses are 41 km and 45 km, respectively. These results imply that the crust to the east of the Xiaojiang fault zone presents characteristics of crustal structure in a stable platform, while the crust to the west is complicated with a lower velocity zone in middle of the upper crust. The average velocity of 6.21 km/s is lower than the global continental crustal average （6.30 km/s）, indicating that the region is tectonically active. According to the lateral variation of velocity and depth of interfaces （including the Moho）, it is inferred that the Xiaojiang fault zone has cut through the whole crust. It is also deduced that existence of low velocity zone in middle of the upper crust is conducive to the south-southeastern sliding of the Sichuan- Yunnan （Chuan-Dian） rhombus block.展开更多
As the largest fault trending NNE-SSW to NE-SW in the eastern Eurasia Continent,the Tanlu fault zone(TLFZ)extends over 2,400 km within China,roughly from Wuxue,Hubei Province,to Russia.Since the Quaternary period,the ...As the largest fault trending NNE-SSW to NE-SW in the eastern Eurasia Continent,the Tanlu fault zone(TLFZ)extends over 2,400 km within China,roughly from Wuxue,Hubei Province,to Russia.Since the Quaternary period,the TLFZ has been an earthquake-prone area in eastern China where several major earthquakes resulted by tectonic compression occurred,causing tremendous casualties and significant economic losses.Many studies on different segments of the TLFZ have been carried out in the past few decades.However,numerous key questions regarding the fault zone remain unanswered due to a lack of clear subsurface characterization and fault delineation.In this study,we present high-resolution tomographic results across the TLFZ to the east of Hefei,where one 22-km-long passive seismic array with densely spaced short-period nodes,and a 24-km-long magnetotelluric array were deployed adjacent to each other.We find the velocity and resistivity variations are highly consistent with known surface geology.Sharp property contrasts in both the seismic shear wave velocity and electrical resistivity profiles clearly delineate the Tanlu F1 fault(TLF-1)near Hefei.More interestingly,an upwelling with distinct high velocity is imaged within the Hefei Basin to the west of the TLF-1,whereas a slanted block with lowvelocity and low-resistivity seems to cut into or thrust upon the high-grade to low-grade middle-pressure rocks in the Zhangbaling uplift right below the Tanlu F2 ductile shear fault(TLF-2).The presented results show a new approach to characterize deep subsurface structure of the TLFZ beyond 2-km depths using passive data,which it is often difficult for active seismic surveys with refracted and reflected waves to image.展开更多
The gold concentration areas in the northwestern Jiaodong Peninsula constituted an important gold metallogenetic region in Eastern China during the Mesozoic. The deep geological bodies＇ texture characteristic is impo...The gold concentration areas in the northwestern Jiaodong Peninsula constituted an important gold metallogenetic region in Eastern China during the Mesozoic. The deep geological bodies＇ texture characteristic is important for exploring the resources thoroughly and understanding the metallogenic process. The detailed textures were revealed using high-resolution seismic profiles through the three major ore-controlling structures-Sanshandao fault zone, Jiaojia fault zone and Zhaoping fault zone. This study aims to establish a deep structural framework of this area. Based on their formation mechanism, the fault structures developed in the area can be divided into regional and local fault structures. The structural styles are characterised by superimposing their compressional, strike-slip and extensional multi-stage activities. The crust is cut by vertical structures corresponding to a left-lateral strike-slip fault system on the surface. Nearby these structures are the arc-shape structures formed by multi-stage magma intrusions into the upper crust. Bounded by the Tancheng–Lujiang and Muping–Jimo fault zones, the current Jiaodong block, developed a series of NE-trending strike-slip fault systems, was probably formed by the assemblage of several obliquely aligned blocks. The intensive magmatism and hydrothermal activity between the blocks induced large-scale mineralisation. It provides a new angle of view for understanding the cratonic destruction and large ore-concentration formed during the Mesozoic.展开更多
In this paper a comprehensive tracing study is conducted on mantle degassing and deep-seated geological structures in different types of fault zones in the continent of China based on the helium isotope data, coupled ...In this paper a comprehensive tracing study is conducted on mantle degassing and deep-seated geological structures in different types of fault zones in the continent of China based on the helium isotope data, coupled with some indices such as CO2/3He, CH4/3He and 40Ar/36Ar, and geological tectonics data. There are four representative types of fault zones: (1) Lithospheric fault zones in the extensional tectonic environment are characterized by a small Earth’s crust thickness, a lower CH4/3He-high R and lower CO2/3He-high R system, the strongest mantle de- gassing, and the dominance of mantle fluid, as is represented by the Tancheng-Lujiang fault zone. (2) The lithospheric fault zones or the subduction zone in the strongly compresso-tectonic envi- ronment, for instance, the Bangonghu-Nujiang fault zone, are characterized by a huge thick Earth’s crust, with the R/Ra values within the range of 0.43―1.13, and weak mantle degassing with mantle-source helium accounting for 5%―14% of the total. (3) The deep-seated fault zones at the basinal margins of an orogenic belt are characterized by R values being on order of mag- nitude of 10?7, and the CH4/3He values, 109―1010, CO2/3He values, 106―108; as well as much weak mantle degassing. (4) The crustal fault zones in the orogenic belt, such as the Yaojie fault zone (F19), possess a high CH4/3He-low R (10?8) and high CO2/3He-low R system, with no obvi- ous sign of mantle degassing. Studies have shown that the deep-seated huge fault zones are the major channel ways for mantle degassing, the main factors controlling the intensity of mantle degassing are fault depth, tectonic environment and crust thickness; the intensity of mantle de- gassing can reflect the depth and the status of deep-seated tectonic environment of fault, while the geochemical tracing studies of gases can open up a new research approach; upwelling ac- tivity of hydrothermal fluids from the deep interior of the Earth may be one of the driving forces for the formation and evolution of the huge deep fault zones. Piedmont fault zones are the locations where deep-seated tectonic activity and crust/mantle structure are transformed, which are of great significance in understanding the mechanisms of formation of orogenic belts and basins.展开更多
文摘A comprehensive discussion on the deep seated genesis of gold metallogenic materials and the tectono magmatic controls over gold deposits is given in this paper, which is based on the crustal and upper mantle structural characteristics of the Jiaodong massif, the property, activation history and styles of the Tancheng Lujiang fault zone, as well as a series of accompanying tectono magmatic events. Prediction for further prospecting gold deposits in the area is also made.
基金supported by National Natural Science Foundation of China Projects(42074065)Basic Research Operation Expenses of the Institute of Earthquake Prediction,China Earthquake Administration(2021IEF0103)。
文摘The Sichuan-Yunnan Block(SYB)is located at the SE margin of the Qinghai-Tibetan Plateau(TP).Under the influence of the southeastward movement of material originated from the TP,intense crustal deformation,frequent seismic activity,and complex geological structures are observed in the SYB.The Lijiang-Xiaojinhe fault(LXF)goes through the central part of the SYB,dividing it into two blocks from north to south,and forming an intersecting fault system with the surrounding faults.This paper firstly introduces the morphology and the nature of the LXF,the distribution of the regional surface displacements and the focal mechanisms,and then analyzes the medium deformation and the effects of faults.Moreover,according to the regional tectonics and geophysical patterns,the paper discusses the characteristics of the north-south blocks of the SYB and the abrupt change of deep structure along the LXF zone.Since seismic anisotropy is an essential property for detecting crustal stress,deep structures and dynamical mechanisms,this paper is dedicated to the advances in seismic anisotropy at different depths and different scales in the study area.There are noteworthy differences in the anisotropic features between the north part and the south part of the SYB,possibly associated with a clear boundary adjacent to the LXF.Such phenomenon suggests some close correlation between anisotropic zoning boundary and the LXF,although this boundary is not consistent with the LXF in strike.The results from the deformation of the crust and the upper mantle elucidate the distribution patterns of the crust-mantle coupling in the north part and the crustmantle decoupling in the south part,even though this conclusion needs to be further verified by more studies.Presently,the scientific understanding of the deep tectonics and the media deformation around the“generalized”LXF i.e.the LXF with the Jinpingshan fault on its eastern side,is still insufficient,and related equivocal topics deserve more in-depth studies.
基金supported by the project "Exploration of Active Seismic Faults in Large Cities and Earthquake risk Assessment"National Natural Science Foundation of China (Grant No. 40774037)Contribution No.is 09FE3004 of Institute of Geophysics,China Earthquake Administration
文摘Based on the integrative interpretation of travel-time data and amplitude information obtained from the deep seismic sounding experiment on the Chuxiong-Luoping profile, eastern Yunnan province, carried out in January of 2005, we present a 2-D P wave velocity structure along the profile. The crustal structure shows remarkable contrasts between the two sides of the Xiaojiang fault zone, although the whole profile is situated within the Yangtze platform. The average P wave velocities of the crust on the west and east sides of the fault zone are 6.21 km/s and 6.32 km/s, respectively, and the crustal thicknesses are 41 km and 45 km, respectively. These results imply that the crust to the east of the Xiaojiang fault zone presents characteristics of crustal structure in a stable platform, while the crust to the west is complicated with a lower velocity zone in middle of the upper crust. The average velocity of 6.21 km/s is lower than the global continental crustal average （6.30 km/s）, indicating that the region is tectonically active. According to the lateral variation of velocity and depth of interfaces （including the Moho）, it is inferred that the Xiaojiang fault zone has cut through the whole crust. It is also deduced that existence of low velocity zone in middle of the upper crust is conducive to the south-southeastern sliding of the Sichuan- Yunnan （Chuan-Dian） rhombus block.
基金This research is supported by the National Natural Science Foundation of China(No.41874048)supported by the National Key Research and Development Projects(No.2018YFC0603500).
文摘As the largest fault trending NNE-SSW to NE-SW in the eastern Eurasia Continent,the Tanlu fault zone(TLFZ)extends over 2,400 km within China,roughly from Wuxue,Hubei Province,to Russia.Since the Quaternary period,the TLFZ has been an earthquake-prone area in eastern China where several major earthquakes resulted by tectonic compression occurred,causing tremendous casualties and significant economic losses.Many studies on different segments of the TLFZ have been carried out in the past few decades.However,numerous key questions regarding the fault zone remain unanswered due to a lack of clear subsurface characterization and fault delineation.In this study,we present high-resolution tomographic results across the TLFZ to the east of Hefei,where one 22-km-long passive seismic array with densely spaced short-period nodes,and a 24-km-long magnetotelluric array were deployed adjacent to each other.We find the velocity and resistivity variations are highly consistent with known surface geology.Sharp property contrasts in both the seismic shear wave velocity and electrical resistivity profiles clearly delineate the Tanlu F1 fault(TLF-1)near Hefei.More interestingly,an upwelling with distinct high velocity is imaged within the Hefei Basin to the west of the TLF-1,whereas a slanted block with lowvelocity and low-resistivity seems to cut into or thrust upon the high-grade to low-grade middle-pressure rocks in the Zhangbaling uplift right below the Tanlu F2 ductile shear fault(TLF-2).The presented results show a new approach to characterize deep subsurface structure of the TLFZ beyond 2-km depths using passive data,which it is often difficult for active seismic surveys with refracted and reflected waves to image.
基金supported by a project of Special Research on Land and Research Public Welfare Industry(201511029)founded by Ministry of Land and Resources of the People’s Republic of China
文摘The gold concentration areas in the northwestern Jiaodong Peninsula constituted an important gold metallogenetic region in Eastern China during the Mesozoic. The deep geological bodies＇ texture characteristic is important for exploring the resources thoroughly and understanding the metallogenic process. The detailed textures were revealed using high-resolution seismic profiles through the three major ore-controlling structures-Sanshandao fault zone, Jiaojia fault zone and Zhaoping fault zone. This study aims to establish a deep structural framework of this area. Based on their formation mechanism, the fault structures developed in the area can be divided into regional and local fault structures. The structural styles are characterised by superimposing their compressional, strike-slip and extensional multi-stage activities. The crust is cut by vertical structures corresponding to a left-lateral strike-slip fault system on the surface. Nearby these structures are the arc-shape structures formed by multi-stage magma intrusions into the upper crust. Bounded by the Tancheng–Lujiang and Muping–Jimo fault zones, the current Jiaodong block, developed a series of NE-trending strike-slip fault systems, was probably formed by the assemblage of several obliquely aligned blocks. The intensive magmatism and hydrothermal activity between the blocks induced large-scale mineralisation. It provides a new angle of view for understanding the cratonic destruction and large ore-concentration formed during the Mesozoic.
基金the State "973" Program(Grant No.G2002CB211701) the National Natural Science Foundation of China(Grant No.40372065).
文摘In this paper a comprehensive tracing study is conducted on mantle degassing and deep-seated geological structures in different types of fault zones in the continent of China based on the helium isotope data, coupled with some indices such as CO2/3He, CH4/3He and 40Ar/36Ar, and geological tectonics data. There are four representative types of fault zones: (1) Lithospheric fault zones in the extensional tectonic environment are characterized by a small Earth’s crust thickness, a lower CH4/3He-high R and lower CO2/3He-high R system, the strongest mantle de- gassing, and the dominance of mantle fluid, as is represented by the Tancheng-Lujiang fault zone. (2) The lithospheric fault zones or the subduction zone in the strongly compresso-tectonic envi- ronment, for instance, the Bangonghu-Nujiang fault zone, are characterized by a huge thick Earth’s crust, with the R/Ra values within the range of 0.43―1.13, and weak mantle degassing with mantle-source helium accounting for 5%―14% of the total. (3) The deep-seated fault zones at the basinal margins of an orogenic belt are characterized by R values being on order of mag- nitude of 10?7, and the CH4/3He values, 109―1010, CO2/3He values, 106―108; as well as much weak mantle degassing. (4) The crustal fault zones in the orogenic belt, such as the Yaojie fault zone (F19), possess a high CH4/3He-low R (10?8) and high CO2/3He-low R system, with no obvi- ous sign of mantle degassing. Studies have shown that the deep-seated huge fault zones are the major channel ways for mantle degassing, the main factors controlling the intensity of mantle degassing are fault depth, tectonic environment and crust thickness; the intensity of mantle de- gassing can reflect the depth and the status of deep-seated tectonic environment of fault, while the geochemical tracing studies of gases can open up a new research approach; upwelling ac- tivity of hydrothermal fluids from the deep interior of the Earth may be one of the driving forces for the formation and evolution of the huge deep fault zones. Piedmont fault zones are the locations where deep-seated tectonic activity and crust/mantle structure are transformed, which are of great significance in understanding the mechanisms of formation of orogenic belts and basins.
