This study describes the adsorption features of cadmium on Fe2O3 and MnO2 in alkaline saline conditions. The adsorption reached equilibrium in 6 hours under alkaline conditions. The absorption of cadmium on Fe2O3 and ...This study describes the adsorption features of cadmium on Fe2O3 and MnO2 in alkaline saline conditions. The adsorption reached equilibrium in 6 hours under alkaline conditions. The absorption of cadmium on Fe2O3 and MnO2 was consistent with Freundlich absorption isotherms, and the corresponding adsorption capacities were 16.3 and 16.7 mg·g-1, respectively. Moreover, the adsorption quantity of cadmium on Fe2O3 and MnO2 rose with increas-ing pH from acidic to neutral, and reached the maximum at pH= 9. The coexisting chlorides reduced the adsorption capacity of Fe2O3 and MnO2. The influence intensities of different cations follow the order of CaCl2>>KCl>NaCl. However, the influence of sodium salts on the capacities of Fe2O3 and MnO2 to adsorb cadmium appeared more complicated: the relatively low concentrations of sodium salts could reduce the adsorption capacity; with increasing concentrations of sodium salts, e.g. NaCl and NaNO3. the adsorption capacity decreased continually. Moreover, due to the competition adsorption and precipitation effects, the adsorption capabilities of Na2CO3, NaH2PO4 and Na2HSO4 could also be reduced and cadmium concentrations in the solution were reduced as well.展开更多
A new stearic acid method(SAM) has been used to prepare ultrafine K2La2Ti3O10 nanocrystalline. Each state of synthesis process was followed by the use of FT IR analysis. The resulting materials have been characterized...A new stearic acid method(SAM) has been used to prepare ultrafine K2La2Ti3O10 nanocrystalline. Each state of synthesis process was followed by the use of FT IR analysis. The resulting materials have been characterized by means of XRD, TEM, BET surface area analysis. The acid exchanging property of the obtained product was also studied. The experimental results showed that comparing with the product of traditional solid state reaction, the particle size of the K2La2Ti3O10 synthesized by SAM is greatly reduced, BET surface area is high(more than 11.83m2· g- 1) and has different acid exchanging properties. It can be easily exfoliated in 2mol· L- 1 HNO3 solution.展开更多
The carbonation characteristics of K2CO3/Al2O3 supported sorbent for CO2 capture was investigated with thermogravimetric apparatus(TGA),X-ray diffraction(XRD),scanning electron microscopy analysis(SEM)and N2 adsorptio...The carbonation characteristics of K2CO3/Al2O3 supported sorbent for CO2 capture was investigated with thermogravimetric apparatus(TGA),X-ray diffraction(XRD),scanning electron microscopy analysis(SEM)and N2 adsorption.The results showed that the carbonation rate of K2CO3 before being loaded on Al2O3 was slow.However,the K2CO3/Al2O3supported sorbent showed excellent carbonation performance.The difference in carbonation behavior between K2CO3and K2CO3/Al2O3supported sorbent was analyzed from the microscopic view.The analytical reagent K2CO3 sample was of monoclinic crystal structure and could react quickly with H2O in the experimental carbonation environment to produce K2CO3·1.5H2O,which was unfavorable to carbonation reaction.When K2CO3was loaded on Al2O3,the surface area and porosity of the sorbent was improved greatly.So the carbonation properties of the K2CO3/Al2O3 supported sorbent was also improved.展开更多
基金supported by National Natural Science Foundation of China (No. 40743020 No. 40973078)Tianjin Natural Science Foundation (No. 08JCYBJC10400 and No. 06YFSZSF05100)
文摘This study describes the adsorption features of cadmium on Fe2O3 and MnO2 in alkaline saline conditions. The adsorption reached equilibrium in 6 hours under alkaline conditions. The absorption of cadmium on Fe2O3 and MnO2 was consistent with Freundlich absorption isotherms, and the corresponding adsorption capacities were 16.3 and 16.7 mg·g-1, respectively. Moreover, the adsorption quantity of cadmium on Fe2O3 and MnO2 rose with increas-ing pH from acidic to neutral, and reached the maximum at pH= 9. The coexisting chlorides reduced the adsorption capacity of Fe2O3 and MnO2. The influence intensities of different cations follow the order of CaCl2>>KCl>NaCl. However, the influence of sodium salts on the capacities of Fe2O3 and MnO2 to adsorb cadmium appeared more complicated: the relatively low concentrations of sodium salts could reduce the adsorption capacity; with increasing concentrations of sodium salts, e.g. NaCl and NaNO3. the adsorption capacity decreased continually. Moreover, due to the competition adsorption and precipitation effects, the adsorption capabilities of Na2CO3, NaH2PO4 and Na2HSO4 could also be reduced and cadmium concentrations in the solution were reduced as well.
文摘A new stearic acid method(SAM) has been used to prepare ultrafine K2La2Ti3O10 nanocrystalline. Each state of synthesis process was followed by the use of FT IR analysis. The resulting materials have been characterized by means of XRD, TEM, BET surface area analysis. The acid exchanging property of the obtained product was also studied. The experimental results showed that comparing with the product of traditional solid state reaction, the particle size of the K2La2Ti3O10 synthesized by SAM is greatly reduced, BET surface area is high(more than 11.83m2· g- 1) and has different acid exchanging properties. It can be easily exfoliated in 2mol· L- 1 HNO3 solution.
文摘The carbonation characteristics of K2CO3/Al2O3 supported sorbent for CO2 capture was investigated with thermogravimetric apparatus(TGA),X-ray diffraction(XRD),scanning electron microscopy analysis(SEM)and N2 adsorption.The results showed that the carbonation rate of K2CO3 before being loaded on Al2O3 was slow.However,the K2CO3/Al2O3supported sorbent showed excellent carbonation performance.The difference in carbonation behavior between K2CO3and K2CO3/Al2O3supported sorbent was analyzed from the microscopic view.The analytical reagent K2CO3 sample was of monoclinic crystal structure and could react quickly with H2O in the experimental carbonation environment to produce K2CO3·1.5H2O,which was unfavorable to carbonation reaction.When K2CO3was loaded on Al2O3,the surface area and porosity of the sorbent was improved greatly.So the carbonation properties of the K2CO3/Al2O3 supported sorbent was also improved.
