A quantum model based on solutions to the Schrodinger-Poisson equations is developed to investigate the device behavior related togate tunneling current for nanoscale MOSFETs with high-k gate stacks. This model can mo...A quantum model based on solutions to the Schrodinger-Poisson equations is developed to investigate the device behavior related togate tunneling current for nanoscale MOSFETs with high-k gate stacks. This model can model various MOS device structures with combinations of high-k dielectric materials and multilayer gate stacks,revealing quantum effects on the device performance. Comparisons are made for gate current behavior between nMOSFET and pMOSFET high- k gate stack structures. The results presented are consistent with experimental data, whereas a new finding for an optimum nitrogen content in HfSiON gate dielectric requires further experimental verifications.展开更多
In order to effectively predict the fracture of AA7075-T6 sheet, the forming limit curves of AA7075-T6 high-strength sheet were drawn according to Morciniak Kuczyski (M K) model and Lou Huh criterion, respectively. Th...In order to effectively predict the fracture of AA7075-T6 sheet, the forming limit curves of AA7075-T6 high-strength sheet were drawn according to Morciniak Kuczyski (M K) model and Lou Huh criterion, respectively. The errors between the predicted values of the two theoretical prediction models and experimental values were calculated by error analysis. The forming limit curves were verified by the punch stretch test to evaluate the prediction accuracy of M K model and Lou Huh criterion. The error analysis results show that the mean error of Lou Huh criterion with the optimal parameters for all tensile specimens is 25.04%, while the mean error of M K model for all tensile specimens is 74.24%. The prediction accuracy of Lou Huh criterion in predicting the fracture of AA7075-T6 sheet is higher. The punch stretch test results show that the forming limit curve drawn by Lou Huh criterion can effectively predict the fracture of AA7075-T6 sheet, but the prediction accuracy of M K model is relatively poor.展开更多
The influence of initial groove angle on strain rate inside and outside groove of Ti6Al4V alloy was investigated.Based on the evolution of strain rate inside and outside groove,the effect of strain rate difference on ...The influence of initial groove angle on strain rate inside and outside groove of Ti6Al4V alloy was investigated.Based on the evolution of strain rate inside and outside groove,the effect of strain rate difference on the evolution of normal stress and effective stress inside and outside groove was also analyzed.The results show that when linear loading path changes from uniaxial tension to equi-biaxial tension,the initial groove angle plays a weaker role in the evolution of strain rate in the M-K model.Due to the constraint of force equilibrium between inside and outside groove,the strain rate difference makes the normal stress inside groove firstly decrease and then increase during calculation,which makes the prediction algorithm of forming limit convergent at elevated temperature.The decrease of normal stress inside groove is mainly caused by high temperature softening effect and the rotation of groove,while the increase of normal stress inside groove is mainly due to strain rate hardening effect.展开更多
The variations of drag force acting on the windbreak and the bulk drag coefficients for different windbreak widths were studied experimentally in the Eiffel-type non-circulating wind tunnel at the Hydraulic Engineerin...The variations of drag force acting on the windbreak and the bulk drag coefficients for different windbreak widths were studied experimentally in the Eiffel-type non-circulating wind tunnel at the Hydraulic Engineering Laboratory, Saitama University, Japan, to elucidate the effects of windbreak width in the wind direction on wind velocity reduction behind a windbreak. The variations of flow field for different windbreak widths were studied numerically by using the two-dimensional Reynolds-averaged Navier-Stokes (RANS) equation with a k-ε turbulence closure model. Results show that the total drag force to wind increased with increasing windbreak width, but the bulk drag coefficient decreased slightly. The relationship between the bulk drag coefficient Cd and the windbreak width W and height H can be presented by the equation of Cd=kd (W/H)-b (kd, b: constants). The result of the numerical simulation shows that the windbreak width greatly affects the location and the value of the minimum wind velocity. The wind velocity decreased by 15%–22% as the windbreak width increased.展开更多
文摘A quantum model based on solutions to the Schrodinger-Poisson equations is developed to investigate the device behavior related togate tunneling current for nanoscale MOSFETs with high-k gate stacks. This model can model various MOS device structures with combinations of high-k dielectric materials and multilayer gate stacks,revealing quantum effects on the device performance. Comparisons are made for gate current behavior between nMOSFET and pMOSFET high- k gate stack structures. The results presented are consistent with experimental data, whereas a new finding for an optimum nitrogen content in HfSiON gate dielectric requires further experimental verifications.
基金Project (51775481) supported by the National Natural Science Foundation of ChinaProject (E2019203418) supported by the Natural Science Foundation of Hebei Province, ChinaProject (ZD2017078) supported by the Science and Technology Plan of Hebei Higher School of Education Department, China。
文摘In order to effectively predict the fracture of AA7075-T6 sheet, the forming limit curves of AA7075-T6 high-strength sheet were drawn according to Morciniak Kuczyski (M K) model and Lou Huh criterion, respectively. The errors between the predicted values of the two theoretical prediction models and experimental values were calculated by error analysis. The forming limit curves were verified by the punch stretch test to evaluate the prediction accuracy of M K model and Lou Huh criterion. The error analysis results show that the mean error of Lou Huh criterion with the optimal parameters for all tensile specimens is 25.04%, while the mean error of M K model for all tensile specimens is 74.24%. The prediction accuracy of Lou Huh criterion in predicting the fracture of AA7075-T6 sheet is higher. The punch stretch test results show that the forming limit curve drawn by Lou Huh criterion can effectively predict the fracture of AA7075-T6 sheet, but the prediction accuracy of M K model is relatively poor.
基金Project(51775023)supported by the National Natural Science Foundation of ChinaProject(YWF-18-BJ-J-75)supported by the Fundamental Research Funds for the Central Universities,China
文摘The influence of initial groove angle on strain rate inside and outside groove of Ti6Al4V alloy was investigated.Based on the evolution of strain rate inside and outside groove,the effect of strain rate difference on the evolution of normal stress and effective stress inside and outside groove was also analyzed.The results show that when linear loading path changes from uniaxial tension to equi-biaxial tension,the initial groove angle plays a weaker role in the evolution of strain rate in the M-K model.Due to the constraint of force equilibrium between inside and outside groove,the strain rate difference makes the normal stress inside groove firstly decrease and then increase during calculation,which makes the prediction algorithm of forming limit convergent at elevated temperature.The decrease of normal stress inside groove is mainly caused by high temperature softening effect and the rotation of groove,while the increase of normal stress inside groove is mainly due to strain rate hardening effect.
文摘The variations of drag force acting on the windbreak and the bulk drag coefficients for different windbreak widths were studied experimentally in the Eiffel-type non-circulating wind tunnel at the Hydraulic Engineering Laboratory, Saitama University, Japan, to elucidate the effects of windbreak width in the wind direction on wind velocity reduction behind a windbreak. The variations of flow field for different windbreak widths were studied numerically by using the two-dimensional Reynolds-averaged Navier-Stokes (RANS) equation with a k-ε turbulence closure model. Results show that the total drag force to wind increased with increasing windbreak width, but the bulk drag coefficient decreased slightly. The relationship between the bulk drag coefficient Cd and the windbreak width W and height H can be presented by the equation of Cd=kd (W/H)-b (kd, b: constants). The result of the numerical simulation shows that the windbreak width greatly affects the location and the value of the minimum wind velocity. The wind velocity decreased by 15%–22% as the windbreak width increased.
