Mobile emergency pilot water plant was used to carry out pilot study of KMnO4 pre-oxidation enhanced coagulation treating high-algae source water. Research showed that the optimal dosages of coagulant and KMnO4 in the...Mobile emergency pilot water plant was used to carry out pilot study of KMnO4 pre-oxidation enhanced coagulation treating high-algae source water. Research showed that the optimal dosages of coagulant and KMnO4 in the process were 6 and 0. 4- 0. 6 mg / L respectively. Under the dosage,removal rate of water turbidity after precipitation rose by 11% than simple coagulation,and removal rate of algae rose by 15%. Removal rates of total amount of odor and GSM by the process were respectively 73% and 59%. The removal rate of total amount of algae by KMnO4 preoxidation was 40%,and removal effect of THM precursors was obvious.展开更多
The hot corrosion behaviors of Ni–16Cr–xAl（x=4.5%, 6.8%, 9.0%, mass fraction） based alloys in Na2SO4–25% NaCl molten salts at 600 °C were investigated. The effects of pre-oxidation and Al content on the resi...The hot corrosion behaviors of Ni–16Cr–xAl（x=4.5%, 6.8%, 9.0%, mass fraction） based alloys in Na2SO4–25% NaCl molten salts at 600 °C were investigated. The effects of pre-oxidation and Al content on the resistance to hot corrosion were examined. The hot corrosion resistance of Ni–16Cr–xAl based alloy with Al addition from 4.5% to 9.0% increases with increasing Al content. The alloy with Al content of 9.0% shows the highest hot corrosion resistance among the examined alloys because more β–NiAl phases are obtained to sustain the Al2O3 scale repaired during hot corrosion. Pre-oxidized specimens have a superior hot corrosion resistance compared with the as-cast specimens, due to a protective oxide scale formed after pre-treatment.展开更多
基金Supported by Major Science and Technology Program for Water Control and Treatment,China(2012ZX07404-003)Taishan Scholar Post Project,China(ts200640025)
文摘Mobile emergency pilot water plant was used to carry out pilot study of KMnO4 pre-oxidation enhanced coagulation treating high-algae source water. Research showed that the optimal dosages of coagulant and KMnO4 in the process were 6 and 0. 4- 0. 6 mg / L respectively. Under the dosage,removal rate of water turbidity after precipitation rose by 11% than simple coagulation,and removal rate of algae rose by 15%. Removal rates of total amount of odor and GSM by the process were respectively 73% and 59%. The removal rate of total amount of algae by KMnO4 preoxidation was 40%,and removal effect of THM precursors was obvious.
基金Project (2009AA032601) supported by the National High-tech Research and Development Program of China
文摘The hot corrosion behaviors of Ni–16Cr–xAl（x=4.5%, 6.8%, 9.0%, mass fraction） based alloys in Na2SO4–25% NaCl molten salts at 600 °C were investigated. The effects of pre-oxidation and Al content on the resistance to hot corrosion were examined. The hot corrosion resistance of Ni–16Cr–xAl based alloy with Al addition from 4.5% to 9.0% increases with increasing Al content. The alloy with Al content of 9.0% shows the highest hot corrosion resistance among the examined alloys because more β–NiAl phases are obtained to sustain the Al2O3 scale repaired during hot corrosion. Pre-oxidized specimens have a superior hot corrosion resistance compared with the as-cast specimens, due to a protective oxide scale formed after pre-treatment.
