As there is substantial progress in the KSTAR tokamak engineering, all themajor structures and sub-systems are under fabrication and in procurement phase. The vacuum vessel,port, cryostat cylinder, lid, and bellows ar...As there is substantial progress in the KSTAR tokamak engineering, all themajor structures and sub-systems are under fabrication and in procurement phase. The vacuum vessel,port, cryostat cylinder, lid, and bellows are being rigorously fabricated in the factory. The lowerpart of the KSTAR such as cryostat base and gravity support has been almost finished in itsfabrication. There are also great progresses and significant results in manufacturing of thesuperconducting magnet, including four Toroidal Field (TF) coils, lower and upper PF7 coils whichare the largest Poloidal Field (PF) coils. The TFOO coil, which has been made for test and back-upof the TF magnet system, was successfully tested in the cool-down and current charging. As thefabrications and procurements of major structures have been actively proceeded, assembly works werealso launched from Aug. 2003. More detailed description on these status, results, and plans will bedescribed in this paper.展开更多
In the experimental campaign of 2010 and 2011 on KSTAR, the NBI-1 system was equipped with one prototype ion source and operated successfully, providing a neutral beam power of 0.7-1.6 MW to the tokamak plasma. The ne...In the experimental campaign of 2010 and 2011 on KSTAR, the NBI-1 system was equipped with one prototype ion source and operated successfully, providing a neutral beam power of 0.7-1.6 MW to the tokamak plasma. The new ion source planned for the 2012 KSTAR campaign had a much more advanced performance compared with the previous one. The target performance of the new ion source was to provide a neutral deuterium beam of 2 MW to the tokamak plasma. The ion source was newly designed, fabricated, and assembled in 2011. The new ion source was then conditioned up to 64 A/100 keV over a 2-hour beam extraction and performance tested at the NB test stand （NBTS） at the Korea Atomic Energy Research Institute （KAERI） in 2012. The measured optimum perveance at which the beam divergence is a minimum was about 2.5μP, and the minimum beam divergent angle was under 1.0° at 60 keV. These results indicate that the 2.0 MW neutral beam power at 100 keV required for the heating of plasma in KSTAR can be delivered by the installation of the new ion source in the KSTAR NBI-1 system.展开更多
The mission of Korea Superconducting Tokamak Advanced Research (KSTAR)project is to develop an advanced steady-state superconducting tokamak for establishing a scientificand technological basis for an attractive fusio...The mission of Korea Superconducting Tokamak Advanced Research (KSTAR)project is to develop an advanced steady-state superconducting tokamak for establishing a scientificand technological basis for an attractive fusion reactor. Because one of the KSTAR mission is toachieve a steady-state operation, the use of superconducting coils is an obvious choice for themagnet system. The KSTAR superconducting magnet system consists of 16 Toroidal Field (TF) coils and14 Poloidal Field (PF) coils. Internally-cooled Cable-In-Conduit Conductors (CICC) are put into usein both the TF and PF coil systems. The TF coil system provides a field of 3.5 T at the plasmacenter and the PF coil system is able to provide a flux swing of 17 V-sec. The major achievement inKSTAR magnet-system development includes the development of CICC, the development of a full-size TFmodel coil, the development of a coil system for background magnetic-field generation , theconstruction of a large-scale superconducting magnet and CICC test facility. TF and PF coils are inthe stage of fabrication to pave the way for the scheduled completion of KSTAR by the end of 2006.展开更多
Long-range precipitation forecasts are useful when managing water supplies.Oceanicatmospheric oscillations have been shown to influence precipitation.Due to a longer cycle of some of the oscillations,a short instrumen...Long-range precipitation forecasts are useful when managing water supplies.Oceanicatmospheric oscillations have been shown to influence precipitation.Due to a longer cycle of some of the oscillations,a short instrumental record is a limitation in using them for long-range precipitation forecasts.The influence of oscillations over precipitation is observable within paleoclimate reconstructions;however,there have been no attempts to utilize these reconstructions in precipitation forecasting.A data-driven model,KStar,is used for obtaining long-range precipitation forecasts by extending the period of record through the use of reconstructions of oscillations.KStar is a nearest neighbor algorithm with an entropy-based distance function.Oceanic-atmospheric oscillation reconstructions include the El Nino-Southern Oscillation(ENSO),the Pacific Decadal Oscillation(PDO),the North Atlantic Oscillation(NAO),and the Atlantic Multi-decadal Oscillation(AMO).Precipitation is forecasted for 20 climate divisions in the western United States.A 10-year moving average is applied to aid in the identification of oscillation phases.A lead time approach is used to simulate a one-year forecast,with a 10-fold cross-validation technique to test the models.Reconstructions are used from 1658-1899,while the observed record is used from 1900-2007.The model is evaluated using mean absolute error(MAE),root mean squared error(RMSE),RMSE-observations standard deviation ratio(RSR),Pearson's correlation coefficient(R),NashSutcliffe coefficient of efficiency(NSE),and linear error in probability space(LEPS) skill score(SK).The role of individual and coupled oscillations is evaluated by dropping oscillations in the model.The results indicate 'good' precipitation estimates using the KStar model.This modeling technique is expected to be useful for long-term water resources planning and management.展开更多
基金the Korean Ministry of Science and Technology under the KSTAR project contract
文摘As there is substantial progress in the KSTAR tokamak engineering, all themajor structures and sub-systems are under fabrication and in procurement phase. The vacuum vessel,port, cryostat cylinder, lid, and bellows are being rigorously fabricated in the factory. The lowerpart of the KSTAR such as cryostat base and gravity support has been almost finished in itsfabrication. There are also great progresses and significant results in manufacturing of thesuperconducting magnet, including four Toroidal Field (TF) coils, lower and upper PF7 coils whichare the largest Poloidal Field (PF) coils. The TFOO coil, which has been made for test and back-upof the TF magnet system, was successfully tested in the cool-down and current charging. As thefabrications and procurements of major structures have been actively proceeded, assembly works werealso launched from Aug. 2003. More detailed description on these status, results, and plans will bedescribed in this paper.
文摘In the experimental campaign of 2010 and 2011 on KSTAR, the NBI-1 system was equipped with one prototype ion source and operated successfully, providing a neutral beam power of 0.7-1.6 MW to the tokamak plasma. The new ion source planned for the 2012 KSTAR campaign had a much more advanced performance compared with the previous one. The target performance of the new ion source was to provide a neutral deuterium beam of 2 MW to the tokamak plasma. The ion source was newly designed, fabricated, and assembled in 2011. The new ion source was then conditioned up to 64 A/100 keV over a 2-hour beam extraction and performance tested at the NB test stand （NBTS） at the Korea Atomic Energy Research Institute （KAERI） in 2012. The measured optimum perveance at which the beam divergence is a minimum was about 2.5μP, and the minimum beam divergent angle was under 1.0° at 60 keV. These results indicate that the 2.0 MW neutral beam power at 100 keV required for the heating of plasma in KSTAR can be delivered by the installation of the new ion source in the KSTAR NBI-1 system.
基金The project supported by the Korea Ministry of Science and Technology under the KSTAR Project
文摘The mission of Korea Superconducting Tokamak Advanced Research (KSTAR)project is to develop an advanced steady-state superconducting tokamak for establishing a scientificand technological basis for an attractive fusion reactor. Because one of the KSTAR mission is toachieve a steady-state operation, the use of superconducting coils is an obvious choice for themagnet system. The KSTAR superconducting magnet system consists of 16 Toroidal Field (TF) coils and14 Poloidal Field (PF) coils. Internally-cooled Cable-In-Conduit Conductors (CICC) are put into usein both the TF and PF coil systems. The TF coil system provides a field of 3.5 T at the plasmacenter and the PF coil system is able to provide a flux swing of 17 V-sec. The major achievement inKSTAR magnet-system development includes the development of CICC, the development of a full-size TFmodel coil, the development of a coil system for background magnetic-field generation , theconstruction of a large-scale superconducting magnet and CICC test facility. TF and PF coils are inthe stage of fabrication to pave the way for the scheduled completion of KSTAR by the end of 2006.
文摘Long-range precipitation forecasts are useful when managing water supplies.Oceanicatmospheric oscillations have been shown to influence precipitation.Due to a longer cycle of some of the oscillations,a short instrumental record is a limitation in using them for long-range precipitation forecasts.The influence of oscillations over precipitation is observable within paleoclimate reconstructions;however,there have been no attempts to utilize these reconstructions in precipitation forecasting.A data-driven model,KStar,is used for obtaining long-range precipitation forecasts by extending the period of record through the use of reconstructions of oscillations.KStar is a nearest neighbor algorithm with an entropy-based distance function.Oceanic-atmospheric oscillation reconstructions include the El Nino-Southern Oscillation(ENSO),the Pacific Decadal Oscillation(PDO),the North Atlantic Oscillation(NAO),and the Atlantic Multi-decadal Oscillation(AMO).Precipitation is forecasted for 20 climate divisions in the western United States.A 10-year moving average is applied to aid in the identification of oscillation phases.A lead time approach is used to simulate a one-year forecast,with a 10-fold cross-validation technique to test the models.Reconstructions are used from 1658-1899,while the observed record is used from 1900-2007.The model is evaluated using mean absolute error(MAE),root mean squared error(RMSE),RMSE-observations standard deviation ratio(RSR),Pearson's correlation coefficient(R),NashSutcliffe coefficient of efficiency(NSE),and linear error in probability space(LEPS) skill score(SK).The role of individual and coupled oscillations is evaluated by dropping oscillations in the model.The results indicate 'good' precipitation estimates using the KStar model.This modeling technique is expected to be useful for long-term water resources planning and management.
