Background For the purpose of utilising hybrid vigour to produce possible hybrids with a suitable level of stability,the knowledge of gene activity and combining ability is a crucial prerequisite before choosing desir...Background For the purpose of utilising hybrid vigour to produce possible hybrids with a suitable level of stability,the knowledge of gene activity and combining ability is a crucial prerequisite before choosing desirable parents.The present study was carried out with six parents crossed in full diallel fashion and generated 30 F1 hybrids.These hybrids were evaluated in two replications in Randomized Block Design at Department of Cotton,TNAU for combining ability and gene action.Diallel analysis was carried out according to Griffing’s method-I(parents + F_(1) + reciprocals) and model-I and Hayman’s graphical approach by using INDOSTAT software.Results Analysis of variance for combining ability indicated that mean square values of GCA,SCA and reciprocals were highly significant for all the traits except for the uniformity index.RG763 and K12 showed highly positively significant GCA effects for most of the yield traits while PA838 and K12 for fibre quality traits,so they were found as best general combiners.PAIG379 × K12 and PDB29 × K12 for yield traits,and PDB29 × PA838,RG763 × PA838,and CNA1007 × RG763 cross combinations for fibre quality traits could be recommended for future breeding programms.Conclusion The results of both Griffing’s and Hayman’s approaches showed that non-additive gene action predominates as SCA variance was bigger than GCA variance,so heterosis breeding is thought to be a more fruitful option for enhancing GCA of many traits.展开更多
A new filamentous cyanobacterial strain(CHAB 4127)was successfully isolated from the algal mat during the field investigation of the open channel from Luanhe River to Tianjin,China.The polyphasic approach combining mo...A new filamentous cyanobacterial strain(CHAB 4127)was successfully isolated from the algal mat during the field investigation of the open channel from Luanhe River to Tianjin,China.The polyphasic approach combining morphological,ultrastructural,ecological,and molecular features was used to characterize this studied strain.The strain is morphologically similar to the Microcoleus-like cyanobacterial taxa under light microscopy,and the radial arrangement of thylakoids is also consistent with that of Microcoleus-like groups.The phylogenetic position of CHAB 4127 based on 16S rRNA gene sequences,is shown to be clearly clustered into an independent clade with the newly established genus Microcoleusiopsis.The maximum similarity of 16S r RNA gene of the studied strain with other existing related cyanobacterial taxa is 93.97%,and the ITS secondary structures is also obviously different from other members of Microcoleaceae.Based on all the above evidence,we proposed the establishment of this novel cyanobacterial genus as Neomicrocoleus,with its type species,Neomicrocoleus tianjinensis.展开更多
Equivalence can be said to be the central issue in translation although its different approaches have caused heated controversy.However,as early as the 1970s,the Skopostheorie emerged in Germany,and it seemed to chall...Equivalence can be said to be the central issue in translation although its different approaches have caused heated controversy.However,as early as the 1970s,the Skopostheorie emerged in Germany,and it seemed to challenge the equivalence theories.Although Nida and some linguistics raised some negative problems of this theory,it still rapidly became famous around the world,This article will mainly compare and analyse Skopostheorie and Baker's translation equivalence approach.First,it will give a simple overview of these two approaches.Second,it will discuss the relevant strengths and weaknesses of these two approaches in relation to their usage.Finally,it will discuss combining these two approaches in the same translation.展开更多
To find the optimized levels of various casting parameters in the ductile iron casting, various casting defects and the rejection rate were observed from a medium scale foundry. The controlled values of different cast...To find the optimized levels of various casting parameters in the ductile iron casting, various casting defects and the rejection rate were observed from a medium scale foundry. The controlled values of different casting parameters such as pouring temperature, inoculation, carbon equivalent, moisture content, green compression strength, permeability and mould hardness were selected. Three different melts of metal with 0.4wt.%, 0.6wt.%, and 0.8wt.% inoculation(Fe-Si-Mg alloy and post inoculant) were produced using a 1-ton capacity coreless medium frequency induction furnace. L-27 orthogonal array with 3-level settings were chosen for the analysis. Responses for each run were observed. The signal-to-noise(S/N) ratio for each run was calculated using the Taguchi approach, and the optimized levels of different casting parameters were identified based on the S/N ratio. The analysis of variance for the casting acceptance percentage concludes that inoculation is the most significant factor affecting the castings' quality with a contribution percentage of 44%; an increase in inoculation results in a significant improvement in acceptance percentage of ductile iron castings. The experiment results showed that with the optimized parameters, the rejection rate was reduced from 16.98% to 6.07%.展开更多
文摘Background For the purpose of utilising hybrid vigour to produce possible hybrids with a suitable level of stability,the knowledge of gene activity and combining ability is a crucial prerequisite before choosing desirable parents.The present study was carried out with six parents crossed in full diallel fashion and generated 30 F1 hybrids.These hybrids were evaluated in two replications in Randomized Block Design at Department of Cotton,TNAU for combining ability and gene action.Diallel analysis was carried out according to Griffing’s method-I(parents + F_(1) + reciprocals) and model-I and Hayman’s graphical approach by using INDOSTAT software.Results Analysis of variance for combining ability indicated that mean square values of GCA,SCA and reciprocals were highly significant for all the traits except for the uniformity index.RG763 and K12 showed highly positively significant GCA effects for most of the yield traits while PA838 and K12 for fibre quality traits,so they were found as best general combiners.PAIG379 × K12 and PDB29 × K12 for yield traits,and PDB29 × PA838,RG763 × PA838,and CNA1007 × RG763 cross combinations for fibre quality traits could be recommended for future breeding programms.Conclusion The results of both Griffing’s and Hayman’s approaches showed that non-additive gene action predominates as SCA variance was bigger than GCA variance,so heterosis breeding is thought to be a more fruitful option for enhancing GCA of many traits.
基金the Zhejiang Provincial Natural Science Foundation of China(No.LD21C030001)the National Natural Science Foundation of China(No.31970219)。
文摘A new filamentous cyanobacterial strain(CHAB 4127)was successfully isolated from the algal mat during the field investigation of the open channel from Luanhe River to Tianjin,China.The polyphasic approach combining morphological,ultrastructural,ecological,and molecular features was used to characterize this studied strain.The strain is morphologically similar to the Microcoleus-like cyanobacterial taxa under light microscopy,and the radial arrangement of thylakoids is also consistent with that of Microcoleus-like groups.The phylogenetic position of CHAB 4127 based on 16S rRNA gene sequences,is shown to be clearly clustered into an independent clade with the newly established genus Microcoleusiopsis.The maximum similarity of 16S r RNA gene of the studied strain with other existing related cyanobacterial taxa is 93.97%,and the ITS secondary structures is also obviously different from other members of Microcoleaceae.Based on all the above evidence,we proposed the establishment of this novel cyanobacterial genus as Neomicrocoleus,with its type species,Neomicrocoleus tianjinensis.
文摘Equivalence can be said to be the central issue in translation although its different approaches have caused heated controversy.However,as early as the 1970s,the Skopostheorie emerged in Germany,and it seemed to challenge the equivalence theories.Although Nida and some linguistics raised some negative problems of this theory,it still rapidly became famous around the world,This article will mainly compare and analyse Skopostheorie and Baker's translation equivalence approach.First,it will give a simple overview of these two approaches.Second,it will discuss the relevant strengths and weaknesses of these two approaches in relation to their usage.Finally,it will discuss combining these two approaches in the same translation.
文摘To find the optimized levels of various casting parameters in the ductile iron casting, various casting defects and the rejection rate were observed from a medium scale foundry. The controlled values of different casting parameters such as pouring temperature, inoculation, carbon equivalent, moisture content, green compression strength, permeability and mould hardness were selected. Three different melts of metal with 0.4wt.%, 0.6wt.%, and 0.8wt.% inoculation(Fe-Si-Mg alloy and post inoculant) were produced using a 1-ton capacity coreless medium frequency induction furnace. L-27 orthogonal array with 3-level settings were chosen for the analysis. Responses for each run were observed. The signal-to-noise(S/N) ratio for each run was calculated using the Taguchi approach, and the optimized levels of different casting parameters were identified based on the S/N ratio. The analysis of variance for the casting acceptance percentage concludes that inoculation is the most significant factor affecting the castings' quality with a contribution percentage of 44%; an increase in inoculation results in a significant improvement in acceptance percentage of ductile iron castings. The experiment results showed that with the optimized parameters, the rejection rate was reduced from 16.98% to 6.07%.
