Formation mechanism of fault accommodation zones under combined stress in graben basin:Implications from geomechanical modeling

A fault accommodation zone is a type of structure that is defined as regulating displacement and strain between faults structure.Increasing numbers of fault accommodation zones are being identified in graben basins,indicating the potential exploration target and petroleum accumulation areas.This study aims to analyze the formation mechanism and development of fault accommodation zones under combined stress by a numerical simulation method considering geomechanical modeling.Using three-dimensional(3-D)seismic interpretation and fractal dimension method,exampled with the Dongxin fault zone,the fault activity and fault combination pattern were conducted to quantitatively characterize the activity difference in fault accommodation zones.Combined with mechanical experiment test,a geomehcanical model was established for fault accommodation zones in a graben basin.Integrating the paleostress numerical simulations and structural physical simulation experiment,the developmental characteristics and genetic mechanism of fault accommodation zones were summarized.Influenced by multi movements and combined stresses,three significant tectonic evolution stages of the Dongxing Fault Zone(DXFZ)were distinguished:During the E_(s)^(3)sedimentary period,the large difference in the stress,strain,and rupture distribution in various faults were significant,and this stage was the key generation period for the prototype of the DXFZ,including the FAZ between large-scale faults.During the E_(s)^(2)sedimentary period,the EW-trending symmetric with opposite dipping normal faults and the NE-SW trending faults with large scale were furtherly developed.The junction area of two secondary normal faults were prone to be ruptured,performing significant period for inheriting and developing characteristics of fault accommodation zones.During the Es1 sedimentary period,the high-order faults in the DXFZ exhibited the obvious fault depressions and strike-slip activity,and the fault accommodation zones were furtherly inherited and developed.This stage was the molded and formative period of the FAZ,the low-order faults,and the depression in the DXFZ.

Advances in seismological methods for characterizing fault zone structure

Large earthquakes frequently occur along complex fault systems.Understanding seismic rupture and long-term fault evolution requires constraining the geometric and material properties of fault zone structures.We provide a comprehensive overview of recent advancements in seismological methods used to study fault zone structures,including seismic tomography,fault zone seismic wave analysis,and seismicity analysis.Observational conditions limit our current ability to fully characterize fault zones,for example,insufficient imaging resolution to discern small-scale anomalies,incomplete capture of crucial fault zone seismic waves,and limited precision in event location accuracy.Dense seismic arrays can overcome these limitations and enable more detailed investigations of fault zone structures.Moreover,we present new insights into the structure of the Anninghe-Xiaojiang fault zone in the southeastern margin of the Qinghai-Xizang Plateau based on data collected from a dense seismic array.We found that utilizing a dense seismic array can identify small-scale features within fault zones,aiding in the interpretation of fault zone geometry and material properties.

Shallow crustal velocity structures revealed by active source tomography and fault activities of the Mianning–Xichang segment of the Anninghe fault zone, Southwest China

The Anninghe fault is a large left-lateral strike-slip fault in southwestern China. It has controlled deposition and magmatic activities since the Proterozoic, and seismic activity occurs frequently. The Mianning-Xichang segment of the Anninghe fault is a seismic gap that has been locked by high stress. Many studies suggest that this segment has great potential for large earthquakes(magnitude >7). We obtained three vertical velocity profiles of the Anninghe fault(between Mianning and Xichang) based on the inversion of P-wave first arrival times. The travel time data were picked from seismograms generated by methane gaseous sources and recorded by three linearly distributed across-fault dense arrays. The inversion results show that the P-wave velocity structures at depths of 0-2 km corresponds well with the local lithology. The Quaternary sediments have low seismic velocities, whereas the igneous rocks,metamorphic rocks, and bedrock have high seismic velocities. We then further discuss the fault activities of the two fault branches of the Anninghe fault in the study region based on small earthquakes(magnitudes between ML 0.5 and ML 2.5) detected by the Xichang array.The eastern fault branch is more active than the western branch and that the fault activities in the eastern branch are different in the northern and southern segments at the border of 28°21′N. The high-resolution models obtained are essential for future earthquake rupture simulations and hazard assessments of the Anninghe fault zone. Future studies of velocity models at greater depths may further explain the complex fault activities in the study region.

Active source monitoring at the Wenchuan fault zone:coseismic velocity change associated with aftershock event and its implication

With the improvement of seismic observation system, more and more observations indicate that earthquakes may cause seismic velocity change. However, the amplitude and spatial distribution of the velocity variation remains a controversial issue. Recent active source monitoring carried out adjacent to Wenchuan Fault Scientific Drilling （WFSD） revealed unambiguous coseismic velocity change associated with a local M8 5.5 earthquake. Here, we carry out forward modeling using two-dimensional spectral element method to further investigate the amplitude and spatial distribution of observed velocity change. The model is well constrained by results from seismic reflection and WFSD coring. Our model strongly suggests that the observed coseismic velocity change is localized within the fault zone with width of ~ 120 m rather than dynamic strong ground shaking. And a velocity decrease of -2.0 % within the fault zone is required to fit the observed travel time delay distribution, which coincides with rock mechanical experiment and theoretical modeling.

The neotectonic deformation and earthquake activity in Zhuanglang river active fault zone of Lanzhou

Lanzhou Institute of Seismology, China Seismological Bureau, Lanzhou 730000, China 2) Institute of Geology, China Seismological Bureau, Beijing 100029, China

Active fault survey on the Tanlu fault zone in Laizhou Bay

Shallow-depth acoustic reflection profiling survey has been conducted on the Tanlu fault zone in Laizhou Bay. It is found that the Tanlu fault zone is obviously active during the late Quaternary and it is still the dominating structure in this region. The Tanlu fault zone consists of two branches. The KL3 fault of the western branch is composed of several high angle normal faults which had been active during the period from the latest Pleistocene to early Holo- cene, dissected by a series of northeast or approximate east-west trending fault which leaped sediment of the late Pleistocene. The Longkou fault of the eastern branch consists of two right-laterally stepped segments. Late Quaternary offsets and growth strata developed along the Tanlu fault zone verify that the fault zone retained active in the latest Pleistocene to the early Holocene. The Anqiu-Juxian fault that passes through the middle of Shandong and corresponds to the Longkou fault is composed of a series of right-laterally stepped segments. The active faults along the eastern branch of the Tanlu fault zone from the Laizhou bay to the north of Anqiu make up a dextral simple shear deformation zone which is characterized by right-lateral strike-slip movement with dip-slip component during the late Quaternary.

Study on Integrated Recurrence Behaviors of Strong Earthquakes Along Entire Active Fault Zones in the Sichuan-Yunnan Region, China

Based on historical earthquake data, we use statistical methods to study integrated recurrence behaviors of strong earthquakes along 7 selected active fault zones in the Sichuan-Yunnan region. The results show that recurrences of strong earthquakes in the 7 fault zones display near-random, random and clustering behaviors. The recurrence processes are never quasi-periodic, and are neither strength-time nor time-strength dependent. The more independent segments for strong earthquake rupturing a fault zone has, the more complicated the corresponding recurrence process is. And relatively active periods and quiescent periods for earthquake activity occur alternatively. Within the active periods, the distribution of recurrence time intervals between earthquakes has relatively large discretion, and can be modelled well by a Weibull distribution. The time distribution of the quiescent periods has relatively small discretion, and can be approximately described by some distributions as the normal. Both the durations of the active periods and the numbers of strong earthquakes within the active periods vary obviously cycle by cycle, leading to the relatively active periods having never repeated quasi-periodically. Therefore, the probabilistic assessment for middle- and long-term seismic hazard for entireties of active fault zones based on data of historical strong earthquakes on the fault zones still faces difficulty.

Activity Feature of Kazkeaerte Fault Zone in the Late Quaternary

Kazkeaerte fault zone is recognized as an important boundary between Pamir and Tianshan Cenozoic Mountain belts in the west of Tarim Basin. It is an active thrust fault and can be divided into three segments from the west to east: Jilekeroute fault zone, Wuqia earthquake fault zone, Mushi fault zone after geological investigating and mapping along Pamir piedmont. Based on the faulted landform as well as deformation and displacement of young deposit layers, the slip rates of Kazkeaerte fault zone since the late Quaternary are briefly studied. The result shows that the average slip rate of fault is differentiate along different segments.

Active Feature of the Ganzi-Yushu Fault Zone in the Late Quaternary

Based on regional geological mapping results and interpretation of satellites images and areophotos in combination with detailed field study,this paper gives the spatial distribution of recent surface activity of the Ganzi-Yushu fault zone(GYF).According to faulted landform as well as deformation and displacement of young deposit layers,the slip rates of GYF since the late Quaternary are briefly studied,combined with the results of geological chronology(14C and Thermoluminescene dating).The result shows that the average slip rates of GYF is differentiate along different segments:Ganzi segment:horizontal rate is 3.4±0.3 mm/a,vertical rate is 2.2±0.1 mm/a;Manigange segment:horizontal rate is 7.0±0.7 mm/a;Denke segment:horizontal rate is 7.2±1.2 mm/a;Dangjiang segment:horizontal rate is 7.3±0.6 mm/a.

Holocene activities of the Taigu fault zone, Shanxi Province, and their relations with the 1303 Hongdong M=8 earthquake

The Taigu fault zone is one of the major 12 active boundary faults of the Shanxi fault-depression system, located on the eastern boundary of the Jinzhong basin. As the latest investigation indicated, the fault zone had dislocated gully terrace of the first order, forming fault-scarp in front of the loess mesa. It has been discovered in many places in ground surface and trenches that Holocene deposits were dislocated. The latest activity was the 1303 Hongdong earthquake M=8, the fault appeared as right-lateral strike-slip with normal faulting. During that earthquake, the Taigu fault together with the Mianshan western-side fault on the Lingshi upheaval and the Huoshan pediment fault on the eastern boundary of the Linfen basin was being active, forming a surface rupture belt of 160 km in length. Moreover, the Taigu fault were active in the mid-stage of Holocene and near 7 700 aB.P. From these we learnt that, in Shanxi fault-depression system, the run-through activity of two boundary faults of depression-basins might generate great earthquake with M=8.

Late-Quaternary Slip Rate and Seismic Activity of the Xianshuihe Fault Zone in Southwest China

The Xianshuihe fault zone is a seismo-genetic fault zone of left-lateral slip in Southwest China. Since 1725, a total of 59 Ms ≥ 5.0 earthquakes have occurred along this fault zone, including 18 Ms 6.0–6.9 and eight Ms ≥ 7.0 earthquakes. The seismic risk of the Xianshuihe fault zone is a large and realistic threat to the western Sichuan economic corridor. Based on previous studies, we carried out field geological survey and remote sensing interpretation in the fault zone. In addition, geophysical surveys, trenching and age-dating were conducted in the key parts to better understand the geometry, spatial distribution and activity of the fault zone. We infer to divide the fault zone into two parts： the northwest part and the southeast part, with total eight segments. Their Late Quaternary slip rates vary in a range of 11.5 mm/a –（3±1） mm/a. The seismic activities of the Xianshuihe fault zone are frequent and strong, periodical, and reoccurred. Combining the spatial and temporal distribution of the historical earthquakes, the seismic hazard of the Xianshuihe fault zone has been predicted by using the relationship between magnitude and frequency of earthquakes caused by different fault segments. The prediction results show that the segment between Daofu and Qianning has a possibility of Ms ≥ 7.0 earthquakes, while the segment between Shimian and Luding is likely to have earthquakes of about Ms 7.0. It is suggested to establish a GPS or In SAR-based real-time monitoring network of surface displacement to cover the Xianshuihe fault zone, and an early warning system of earthquakes and post seismic geohazards to cover the major residential areas.

Characteristics of Late-Quaternary Activity and Seismic Risk of the Northeastern Section of the Longmenshan Fault Zone

Following the 2008 Wenchuan M8 earthquake,the seismic risk of the northeastern section of the Longmenshan fault zone and the adjacent Hanzhong basin has become an issue that receives much concern.It is facing,however,the problem of a lack of sufficient data because of little previous work in these regions.The northeastern section of the Longmenshan fault zone includes three major faults：the Qingchuan fault,Chaba-Lin＇ansi fault,and Liangshan south margin fault,with the Hanzhong basin at the northern end.This paper presents investigations of the geometry,motion nature,and activity ages of these three faults,and reveals that they are strike slip with normal faulting,with latest activity in the Late Pleistocene.It implies that this section of the Longmenshan fault zone has been in an extensional setting,probably associated with the influence of the Hanzhong basin.Through analysis of the tectonic relationship between the Longmenshan fault zone and the Hanzhong basin,this work verifies that the Qingchuan fault played an important role in the evolution of the Hanzhong basin,and further studies the evolution model of this basin.Finally,with consideration of the tectonic setting of the Longmenshan fault zone and the Hanzhong basin as well as seismicity of surrounding areas,this work suggests that this region has no tectonic conditions for great earthquakes and only potential strong events in the future.

Holocene activities of the Taigu fault zone,Shanxi Province, and their relations with the 1303 Hongdong M=8 earthquake

No abstract available

Recent activity of Chihe segment of Tanlu fault zone

By means of differentiation of remote sensing image, field seismo-geological survey, analysis on drilling explora- tion materials, sampling and dating of rock samples, combined with seismicity and microscopic tectonic analysis, this paper studies the recent activity of Chihe segment of the Tanlu fault zone. The result indicates that the Chihe fault segment undergoes the deformation alternately in the mode of stick slip and creep during Late Quaternary, and its recent activity is mainly creep.

Holocene activity evidence on the southeast boundary fault of Heqing basin, middle segment of Heqing-Eryuan fault zone, West Yunnan Province, China

The Heqing-Eryuan fault is an important part of the active fault system in the Northwestern Yunnan Province, China. Thus, the study on the nature, characteristics and activity history of this fault can provide not only the basis for seismic safety and engineering evaluation, but also the important information for the characteristics, history and patterns of the structural deformation of the southeastern margin of the Tibetan Plateau. Trench and faulted landforms investigations could provide effective paleoseismic methods to obtain the recent parameters of active faults. Using these methods, this study makes some breakthroughs on the recent activity of southeast boundary fault of the Heqing basin, middle segment of Heqing-Eryuan fault zone.Results indicate that the average vertical slip rate and left-lateral slip rate of the segment are about 0.28mm/a and 1.80 mm/a respectively since the Late Pleistocene. The trench near the Beixi Village at the southeast boundary fault of the Heqing basinreveals that there have been at least three paleoearthquake events during the Holocene(~8 ka BP). The vertical displacement and sinistral strike-slip distance of a single paleoearthquake are ~20 cm and ~1.2 m, respectively. The estimated paleoearthquake magnitudes with Ms7.0, and the recurrence interval at 2-5 ka, as well as the latest activity time during 800-290 cal yr BP, are of great significance for preventing and mitigating regional earthquake disasters.

The Fractal Feature of Granulometric Composition in Fault Gouges from the Yishu Fault Zone and Adjacent Northwest-Trending Faults and Its Seismo-geological Implications

In this work,the fractal dimension of granulometric composition in the fault gouge from the Yishu fault zone and northwest-trending faults on its west side is calculated and studied based on the fractal theory of rock fragmentation.The seismo-geological implications of the fractal dimension of granulometric composition in fault gouges are also discussed.The results show that the Yishu fault zone is more active than the northwest-trending faults and the Anqiu-Juxian fault is the most active in the Yishu fault zone.The fractal dimension of fault gouge is a parameter describing the relative active age and rupture mode of the fault and forming age of the fault gouge.The fractal dimension value is also related to the parent rock,thickness,structural position,and clay content of the fault gouge.

Discussion of the Horizontal Intensity of Late Quaternary Fault Activity Along the Tianjingshan Fault Zone in Different Time Intervals and Fault Segments

By computing and classifying the data of gully offset obtained from field surveys along the Tianjingshan fault zone and estimating the ages of three types of gullies,the strike-slip rates along the fault zone are discussed in different time intervals and fault segments.The results suggest that the intensity of activity along the fault zone is not strong,but the differences between different time intervals and fault segments since the late Pleistocene have been obvious.The average rates range from 0.23 mm/a to 1.62 mm/a.The largest average rate is 1.40 mm/a,which occurred in the early and middle of late Pleistocene along the western segment of the fault zone.Since the late stage of the late Pleistocene,the center of faulting activity of the fault zone has shifted to the middle segment,and the average slip rates range have changed from 1.30 mm/a to 1.63 mm/a.

Tectonic implication of geomorphometric analyses along the Saravan Fault: evidence of a difference in tectonic movements between the Sistan Suture Zone and Makran Mountain Belt

In this paper, remote sensing techniques,as well as field studies, have been used to investigate the geomorphological processes and landscape evolution along the Saravan Fault, SE Iran to highlight how topographic features were influenced by active tectonics. Quantitative geomorphic analysis was carried out using mountain-front sinuosity(Smf),valley floor width-valley height ratio(Vf), drainage basin asymmetry factor(Af), Hypsometric integral(Hi), drainage basin shape index(Bs), mean axial slope of channel(MASC), standard deviation of topography(STD) and index of active tectonic(Iat).Remote sensing techniques, as well as field studies revealed that the Saravan Fault have three parts trending N-S, NW-SE, and E-W. Obtained results show that basins with high Iat index are located at where the strike of the Saravan Faults changes and where several strike-slip faults are crossed the Saravan fault.

Relationship between the Pre-existing Active Kunlun Fault and Co-seismic Surface Ruptures Produced by the 2001 Mw 7.8 Central Kunlun Earthquake, China

Field investigations allow to constrain the co-seismic surface rupture zone of ～400 km with a strike-slip up to 16.3 m associated with the 2001 Mw 7.8 Central Kunlun earthquake that occurred along the western segmentof the Kunlun fault, northern Tibet. The co-seismic rupture structures are almost duplicated on the pre-existing fault traces of the Kunlun fault. The deformational characteristics of the co-seismic surface ruptures reveal that the earthquake had a nearly pure strike-slip mechanism. The geologic and topographic evidence clearly shows that spatialdistributions of the co-seismic surface ruptures are restricted by the pre-existing geological structures of the Kunlun fault.