Facile synthesis of efficient pentaethylenehexamine-phosphotungstic acid heterogeneous catalysts for oxidative desulfurization

The ultra-deep desulfurization of oil needs to be solved urgently due to various problems,including environmental pollution and environmental protection requirements.Oxidative desulfurization(ODS)was considered to be the most promising technology.The facile synthesis of highly efficient and stable HPW-based heterogeneous catalysts for oxidative desulfurization is still a challenging task.In this paper,pentamethylene hexamine(PEHA)and phosphotungstic acid(HPW)were combined by a simple one-step method to prepare a heterogeneous catalyst of PEHA-HPW for the production of ultra-deep desulfurization fuel oil.The composite material exhibited excellent catalytic activity and high recyclability,which could reach a 100% dibenzothiophene(DBT)removal rate in 30 min and be recycled at least 5 times.Experiments and DFT simulations were used to better examine the ODS mechanism of PEHA-HPW.It was proved that the rich amino groups on the surface of PEHA-HPW play a crucial role.This work provides a simple and feasible way for the manufacture of efficient HPW-based catalysts.

Encapsulation of ionic liquid, phosphotungstic acid inside the nanocages of MIL-101(Cr): Effective and reusable catalyst for efficient solvent-free oxidative desulfurization from fuel oil

Oxidative desulfurization from fuel oil is one of the important methods for deep desulfurization.The development of efficient oxidative desulfurization catalysts is crucial for improving the desulfurization performance.Successful encapsulation of phosphotungstic acid(HPW)and ionic liquid(BMImBr)inside the mesoporous cages of MIL-101(Cr)was accomplished through a combination of“bottle around ship”and“ship in bottle”methods.The obtained BMImPW@MIL-101(Cr)composite was characterized by XRD,FTIR,BET,SEM,XPS and ICP methods.Results indicated that the BMImPW@MIL-101(Cr)composites with PW^(3−) loading of 23.1–50.7 wt%were obtained,demonstrating that the“bottle around ship”method is beneficial to make full use of nanocages of MIL-101(Cr)to obtain expected high loading of active PW^(3−) .The BMImPW@MIL-101(Cr)exhibits excellent reusability with no evidence of leaching of active PW^(3−) and BMIm^(+),and well-preserved structure after successive cycles of regeneration and reuse.The significantly improved stability of BMImPW@MIL-101(Cr)as compared to HPW@MIL-101(Cr)is possibly because the leaching of the active PW^(3−) −sites can be greatly suppressed by forming large size of BMImPW owing to introduction of BMIm^(+)cation.The BMImPW@MIL-101(Cr)exhibited excellent catalytic activity for solvent free oxidative desulfurization of refractory sulfides.The enhanced oxidative desulfurization activity as compared to HPW@MIL-101(Cr)can be explained by the intimate contact of sulfides with active PW^(3−) sites owing the strong attraction of BMIm^(+)cation with the sulfides.

Study on the epoxidation of olefins with H_(2)O_(2)catalyzed by biquaternary ammonium phosphotungstic acid

Selective epoxidation of olefins is an important field in chemical industry.In this work,we developed a new phosphotungstic acid catalyst{[(C_8H_(17))(CH_(3))_(2)N]_(2)(CH_(2))_(3)}_(1.5){PO_(4)[WO(O_(2))_(2)]_(4)}with long carbon chain and biquaternary ammonium cation.Cyclohexene could be epoxidized to cyclohexene oxide in 96.3%conversion and 98.2%selectivity.The catalyst type,solvent type,catalyst loading,initial molar ratio,temperature,cycle performance and substrate extensibility were studied and optimized,the kinetic parameters about overall reaction and unit reaction were also calculated.Dynamic light scattering analysis was carried out to explain the different catalytic performance between catalysts with different carbon chain length.This novel catalyst and the corresponding dynamics and mechanism study could probably help the industrial application on the epoxidation of cyclohexene with H_(2)O_(2).

Highly Active Sulfided NiPMo Hydrodesulfurization Catalyst Prepared from Keggin-type Phosphomolybdic Acid

A highly active sulfided NiPMo/MCM-41(NiPMo-S/M41)hydrodesulfurization(HDS)catalyst was successfully synthesized using Keggin-type phosphomolybdic acid as the phosphorus and molybdenum source and thioacetamide as the sulfur source.The supported catalysts NiPMo/M41,Ni_(2)P-Mo/M41,and Ni_(2)P/M41 were also prepared to investigate the effects of Mo,S,and the Keggin structure on the HDS performance.The HDS activities of NiPMo/M41 and NiPMo-S/M41 toward dibenzothiophene were much higher than that of Ni_(2)P-Mo/M41,demonstrating that the active phases in the Keggin-structured catalysts were significantly superior to the Mo-modified Ni_(2)P phase.The HDS activities of the catalysts followed the order NiPMo-S/M41(96.7%)>NiPMo/M41(89.9%)>Ni_(2)P-Mo/M41(53.5%)>Ni_(2)P/M41(48.9%).For Ni_(2)P/M41,Ni_(2)P-Mo/M41,and NiPMo/M41,cyclohexylbenzene(CHB)was formed in low concentrations(<21.0%),indicating that direct desulfurization was the favored reaction route and that this did not change for Keggin-structured NiPMo/M41.By contrast,the CHB selectivity of NiPMo-S/M41 increased to 44.6%,much higher than that of NiPMo/M41(17.6%),demonstrating that sulfidation enhanced the hydrogenation ability,which was ascribed to a metal-acid synergistic effect.

Insight into the oxidative desulfurization of high-sulfur petroleum coke under mild conditions:a journey of vanadium-substituted Dawson-type phosphotungstic acid

High-sulfur petroleum coke(HSPC),that is a by-product from slag oil in the coking process of refning,shows versatility values in practical applications and,however,concentrates the majority of organic sulfur.Herein,we design and construct a highly efective CTAB@HPA composites to be explored for the catalytic oxidative desulfurization of HSPC under mild conditions using hydrogen peroxide as the oxidant and 1-butyl-3-methylimidazole tetrafuoroborate ionic liquid as the extractant.The results demonstrate that the sulfur content of HSPC could be strikingly reduced from 4.46 wt%to 2.48 wt%under 60℃ and atmospheric pressure,and that the organic sulfur in HSPC is mainly oxidized to sulfoxide,sulfone and sulfate,which latter can be directly separated from petroleum coke.Moreover,the efect of reaction conditions on the desulfurization performance of HSPC as well as the catalytic oxidation reaction kinetic of HSPC desulfurization was systematically investigated.Furthermore,a mechanism for the oxidative desulfurization of HSPC over CTAB@HPA catalysts was proposed.Therefore,this work provides new insight into how to construct active catalysts for the desulfurization of HSPC under mild conditions.

Synergistic Effect between Zr-MOF and Phosphotungstic Acid for Oxidative Desulfurization

PTA/UiO-66 composites were successfully synthesized by the hydrothermal method.The results showed that the synergistic effect between phosphotungstic acid(PTA)and UiO-66 could enhance the oxidative desulfurization(ODS)activity.The XRD results proved that UiO-66 retained its structure in the PTA/UiO-66 composites.The SEM results showed that the PTA/UiO-66 catalysts exhibited regular octahedral shape.The Raman spectra revealed that PTA in the composites retained the Keggin structure.The XPS results showed that the electron transfer occurred from Zr-MOF to PTA.The ODS reaction mechanism was discussed.Electrons transfer from Zr-MOF to PTA can promote the generation of active species(·OH)and thus enhance the ODS activity.This explanation can be confirmed by the formation of oxygen vacancy and W0 as revealed by the XPS analysis.

A phosphotungstic acid coupled silica-Nafion composite membrane with significantly enhanced ion selectivity for vanadium redox flow battery

An ultra-high ion-selective Nafion composite membrane modified by phosphotungstic acid(PWA)coupled silica for vanadium redox flow battery(VRB)was constructed and prepared through solution casting.The composite membrane exhibits excellent proton conductivity and vanadium ions blocking property by incorporating the nanohybrid composed of silica and PWA into the Nafion ionomer.Simple tuning for the filling amount of the nanohybrid endows the obtained membranes preeminent vanadium barrier property including a minimum vanadium permeability of 3.13×10-7cm2min-1and a maximum proton conductivity of 0.081 S cm-1at 25°C.These indicate an ion selectivity of 2.59×105S min cm-3,which is 6.8times higher than that of recast Nafion(0.33×105S min cm-3).As a result,the VRB with the composite membrane shows superior battery performance containing a lower self-discharge rate,higher capacity retention and more robust cyclic stability compared with recast Nafion over a range of current densities from 40 to 100 m A cm-2.

Photocatalytic Degradation of Organic Dye Methyl Orange with Phosphotungstic Acid

Silicotungstic acid and phosphotungstic acid were prepared and characterized by Fourier Transform Infrared Spectroscopy (FTIR) and X-ray diffraction (XRD). The results showed that the prepared catalysts possess classical Keggin structure. The factors on the degradation of methyl orange, such as the kind of catalyst, the amount of catalyst, the original concentration of dye and illumination time were investigated under metal halide lamp. The degradation of methyl orange is up to 93.6% with phosphotungstic acid at the best reaction conditions at 8.89 g/L concentration of phosphotungstic acid, 5.56 mg/L concentration of methyl orange and 80 min illumination time.

A Hybrid Membrane of Poly(vinyl alcohol) and Phosphotungstic Acid for Fuel Cells

Proton conducting membranes composed of phosphotungstic acid (PWA) and poly(vinyl alcohol) (PVA)were prepared. Conductivity and Fourier transform infrared spectrometer(FTIR) measurements show that most ofthe acid embedded are stable in the PVA matrix when the membrane is immerged in water or methanol solution atroom temperature. Conductivity of the composite membranes scatters around 10-3 S.cm-1 at room temperature.The methanol crossover through the membranes is about an order of magnitude lower than that through Nafion117 membrane.

Three-dimensionally Ordered Macroporous Phosphotungstic Acid/SiO2 for Efficient Catalytic Oxidative Desulfurization

Three-dimensionally ordered(3DOM) macroporous phosphotungstic acid/SiO_2(HPW/SiO_2) materials were prepared by using colloidal crystal as templates and applied for oxidative desulfurization(ODS) of the model fuel oil. The obtained HPW/SiO_2 materials were characterized through scanning electron microscopy, powder X-ray diffraction, N_2 sorption, and Fourier transform infrared spectroscopy. The results indicated that 3 DOM HPW/SiO_2 possessed hierarchical pore architectures which contained ordered macropores and disordered mesopores, with the Keggin type HPW embedded in the framework of pore structure. The removal rate of dibenzothiophene(DBT) could reach 100% under the optimum conditions, moreover. The performance was only slightly decreased for the regenerated catalyst after 7 cycles.

Preparation of Highly Crystalline Microcrystalline Cellulose by Hydrolysis of Cellulose with Phosphotungstic Acid

Phosphotungstic acid(H_3PW_(12)O_(40), HPW), a kind of solid acid, is widely used for hydrolyzing cellulose to prepare microcrystalline cellulose(MCC). MCC is usually used in food, synthetic leather, chemical and pharmaceutical industries. The use of response surface methodology(RSM)can help avoid the random error caused by single factor experimental design,reduce test times and cost, and improve quality. The RSM was used in this study to determine the following optimal process conditions: H^+ molar quantity, 31 mmol/L; reaction temperature, 93℃; reaction time, 2 h; and solid to liquid ratio, 1∶38. Under these conditions, the crystallinity of MCC was77.4%. Thus, the use of RSM allows the preparation of MCC with higher performance and increased crystallinity.

A Direct Liquid Fuel Cell with High Power Density Using Reduced Phosphotungstic Acid as Redox Fuel

Direct liquid fuel cells(DLFCs)are proposed to address the problems of high cost and complex storage and transportation of hydrogen in traditional hydrogen-oxygen proton exchange membrane fuel cells.However,present fuels of organic small molecules used in DLFCs are restricted to problems of sluggish electrochemical kinetics and easily poisoning of precious metal catalysts.Herein,we demonstrate reduced phosphotungstic acid as a liquid fuel for DLFCs based on its advantages of high chemical and electrochemical stability,high electrochemical activity on common carbon material electrodes,and low permeability through proton exchange membranes.The application of phosphotungstic acid fuel effectively solves the problems of high cost of anode catalysts and serious fuel permeation loss in traditional DLFCs.A phosphotungstic acid fuel cell achieves a peak power density of466 mW cm^(-2)at a cell voltage of 0.42 V and good stability at current densities in the range from 20 to 200 mA cm^(-2).

Synthesis,Structure Characterization and Biological Activity of Adenine Salt of 12-Phosphotungstic Acid

A novel adenine（Ade） salt of 12-phosphotungstic acid was synthesized and characterized by elemental analyses,IR, 1H NMR,CV and single crystal X-ray diffraction. The compound crystallized in a triclinic system with a space group P 1 and a =1.3108（3） nm, b =1.3515（3） nm,c =1.3870（3） nm, V =2.0217（7） nm 3,Z =1,R 1=0.0391,wR 2=0.0959. The structure unit of the complex was constructed from [HPW 12 ·O 40 ] -,（C5H6N5） + and C3H7NO,which further extends to form a novel three-dimensional host-guest network via hydrogen-bonding interactions. The anti-tumor activity of the compound was examined in two human tumor cell lines in vitro .

Investigation of Propene Oligomerization Catalyzed by Phosphotungstic Acid Catalysts

In this paper,the propene oligomerization reaction catalyzed by phosphotungstic acid supported on two kinds of silica gel was studied,it had been found out that the conversion of propene catalyzed by the type A silica gel-phosphotungstic acid catalyst was 3.38m%,while the conversion of propene catalyzed by the type B silica gel-phosphotungstic acid catalyst was 90.1m% with a nonene selectivity of 42.33m%,and a dodecene selectivity of 31.79m%.The influence of reaction temperature,pressure and liquid hourly space velocity(LHSV) on the reaction catalyzed by the type B silica gelphosphotungstic acid catalyst was investigated.It had been verified that when the reaction temperature increased from 170℃ to 190℃,the conversion of propene increased while the selectivity of nonene and dodecene decreased;when the reaction pressure increased from 3.5 MPa to 4.5 MPa,the conversion of propene increased also,and the selectivity of nonene and dodecene changed very little.The conversion of propene at a space velocity of between 0.5h-1 and 1.0h-1 was higher than that achieved at 2.0h-1,but the selectivity of nonene and dodecene did not show regular fluctuations.An optimum conversion of propene(91.05m%) and an optimum selectivity of nonene and dodecene(89.51m%) could be achieved at a reaction temperature of 170℃,a reaction pressure of 4.5MPa,and a LHSV of 1.0h-1.The experiments on catalyst life showed that the activity of the type B silica gel-phosphotungstic acid catalyst could be only maintained in 25 hours,and the reason was explained also.

Dawson型磷钨酸季铵盐对亚甲基蓝废水的光催化降解

采用共沉淀法制备了一种新的Dawson型磷钨酸十二烷基三甲基铵盐[C_(15)H_(34)N]_(6)P_(2)W_(18)O_(62)·2H_(2)O,通过红外光谱、热重分析、EDS能谱和扫描电镜对其组成、结构及形貌进行了表征,采用BET氮气吸附测定了比表面积。以亚甲基蓝为模拟染料废水,研究其光催化性能和降解亚甲基蓝的动力学行为,研究结果表明:14 mg/L的50 mL亚甲基蓝模拟染料废水在pH为4的条件下,加入20 mg催化剂,35 W紫外灯光照2 h,亚甲基蓝降解率达到95.0%,光催化降解反应符合一级动力学模型,动力学方程为:lnρ0/ρt=0.051 7t,降解速率常数为0.051 7 min-1,半衰期为13.4 min,表明Dawson型磷钨酸十二烷基三甲基铵对亚甲基蓝的降解具有高效的光催化活性,且重复使用催化性能好,循环5次后的降解率达到94.53%。

磷钨酸预水解葡萄枝脱木素选择性研究

木素含量对植物纤维原料评价和制浆工艺优化具有重要的意义。以葡萄枝为纤维原料,在蒸煮前进行磷钨酸预水解,分别对原料得率,预水解固相产物中酸溶/酸不溶木素含量进行测定,进而计算了预水解过程中木素去除率和脱木素选择性。结果表明:尽管增加磷钨酸用量反而不利于提高预水解过程中的脱木素选择性,但磷钨酸的加入可有效提高预水解过程的木素去除率和脱木素选择性得到有效提高。此外预水解后溶解在液相中的磷钨酸可通过乙醚萃取回用,当磷钨酸回用四次时,预水解过程中木素去除率和脱木素选择性并未显著降低。

氨基功能化硅酸盐固载磷钨酸催化制备生物柴油及动力学研究

以介孔硅酸盐(TUD-1)为载体,经氨基功能化、磷钨酸固载化制备介孔硅酸盐固载磷钨酸催化剂(TUD-1-NH_(2)-PW),并利用XPS、XRD、TGA-DTG、BET、正丁胺电位滴定法等技术手段与方式对催化剂的结构和酸性进行表征,同时考察该催化剂在催化棕榈酸与乙醇酯化制备生物柴油反应中的催化性能。研究结果表明,TUD-1-NH2-PW催化剂具有较好的催化酯化活性和稳定性。利用响应面分析法优化所得生物柴油的产率为96.86%,结果与模型预测值基本符合。优化条件下,合成生物柴油的反应级数为1.94,表观活化能为28.10 kJ/mol,动力学方程为:r=-dC_(A)/dt=3.82×10^(2)exp(-28.10/RT)C_(A)^(1.94)。

Q[6]-PW_(12)自组装体制备及其催化合成乙酸乙酯

以六元瓜环(Q[6])及Keggin型磷钨酸(PW_(12))为原料,制备Q[6]-PW_(12)自组装体。将Q[6]-PW_(12)自组装体作为催化剂应用于乙酸与乙醇酯化反应合成乙酸乙酯。结果表明,Q[6]与PW_(12)发生了自组装作用,且Q[6]-PW_(12)自组装体具有多孔结构特征;Q[6]-PW_(12)自组装体对酯化反应合成乙酸乙酯具有催化作用,且自组装体催化剂经过多次循环使用后依然效果良好。

An Efficient Extraction-Free Method for Oxidative Desulfurization of Model Fuels Employing Cross-Linked Polyionic Liquid Phosphotungstate Catalysts

An efficient extraction-free oxidative desulfurization(ODS)process using a series of cross-linked polyionic liquid phosphotungstate(CLPIL-PW)catalysts is reported.The cross-linked PILs were prepared with DVB and 1-n-alkyl-3-vinyl imidazole hydrobromide(alkyl=ethyl,butyl,octyl,dodecyl),and were then assembled with phosphotungstic acid(H_(3)PW_(12)O_(40))to form the catalysts.The CLPIL-PWs have been applied to the oxidative removal of dibenzothiophene(DBT)from model oil with H_(2)O_(2) as an oxidant.The effects of ionic liquid(IL)cationic species,varying the DVB/IL molar ratio in the polymerization process,and varying operating conditions were investigated.The CLPIL-PWs were characterized by inductively coupled plasma(ICP)mass spectrometry,elemental analysis,scanning electron microscopy(SEM),Fourier transform infra-red(FTIR)spectroscopy,X-ray diffraction(XRD),^(13)C and^(31)P nuclear magnetic resonance(NMR)spectroscopy.The polydivinylbenzene-co-1-n-octyl-3-vinyl imidazole phosphotungstate(P(DVB-OVIm)PW)exhibited the highest DBT removal efficiency(99.9%)and remarkable recyclability,and could be reused eight times without reducing its activity.Finally,an extraction-free ODS mechanism is proposed.