A type of combined optical fiber interferometric acoustic emission sensor is proposed. The sensor can be independent on the laser source and make light interference by matching the lengths of two arms,so it can be use...A type of combined optical fiber interferometric acoustic emission sensor is proposed. The sensor can be independent on the laser source and make light interference by matching the lengths of two arms,so it can be used to monitor the health of large structure. Theoretical analyses indicate that the system can be equivalent to the Michelson interferometer with two optical fiber loop reflectors,and its sensitivity has been remarkably increased because of the decrease of the losses of light energy. PZT is powered by DC regulator to control the operating point of the system,so the system can accurately detect feeble vibration which is generated by ultrasonic waves propagating on the surface of solid. The amplitude and the frequency of feeble vibration signal are obtained by detecting the output light intensity of interferometer and using Fourier transform technique. The results indicate that the system can be used to detect the acoustic emission signals by the frequency characteristics.展开更多
In view of the problem that the sensing characteristics of the multi-mode interferometric fiber sensors cannot be accurately analyzed,an analysis method based on the fast Fourier transform(FFT)and inverse fast Fourier...In view of the problem that the sensing characteristics of the multi-mode interferometric fiber sensors cannot be accurately analyzed,an analysis method based on the fast Fourier transform(FFT)and inverse fast Fourier transform(IFFT)is proposed and demonstrated theoretically and experimentally.The suitabilities of the rectangular window function with the narrow main lobe(high spectrum resolution)and low side lobe(high main mode energy leakage)and the Hanning window function with the wide main lobe(low spectrum resolution)and high side lobe(high energy concentration)in this kind of sensor analysis are discussed,respectively.This method can not only realize the sensing performance analysis of the various modes,but also overcome the inconsistency of the different interference wavelength(dip)sensing characteristics in the conventional analysis methods.At the same time,this method is also beneficial to solve the repetitive problem of such sensors.展开更多
Fiber optic sensors have been widely used and studied in recent times. This paper presents operating principles and applications of fiber optic sensors namely reflectometric and interferometric fiber optic sensors. Ma...Fiber optic sensors have been widely used and studied in recent times. This paper presents operating principles and applications of fiber optic sensors namely reflectometric and interferometric fiber optic sensors. Majority of optical fiber sensors fall under these two broad categories. Both interferometric and reflectometric fiber optic sensors are becoming popular for their ease of use, flexibility, long distance sensing, and potentially noise free detection. Also, these sensors can easily be used in various applications such as structural health monitoring, perimeter intrusion detection, temperature monitoring, and other numerous applications. This paper broadly classifies fiber optic sensors into two subtypes. The paper further highlights different sensors based on their sensing resolution, range, spatial advantages, and applications.展开更多
Optical fiber interferometric sensors based on [3×3] couplers have been used in many fields. A new technique is proposed to demodulate output signals of this kind of sensors. The technique recovers the signal of ...Optical fiber interferometric sensors based on [3×3] couplers have been used in many fields. A new technique is proposed to demodulate output signals of this kind of sensors. The technique recovers the signal of interest by fitting coefficients of elliptic （Lissajous） curves between each fiber pair. Different from other approaches, this technique eliminates the dependence on the idealization of [3×3] coupler, provides enhanced tolerance to the variance of photoelectric converters, and is anti-polarization in a certain extent. The main algorithm has been successfully demonstrated both by numerical simulation and experimental result.展开更多
Good linearity and wide dynamic range are the advantages of asymmetric Fabry-Pérot （F-P） interferometric cavity, whose realization has been long for. Based on optical thin film characteristic matrix theory, an ...Good linearity and wide dynamic range are the advantages of asymmetric Fabry-Pérot （F-P） interferometric cavity, whose realization has been long for. Based on optical thin film characteristic matrix theory, an asymmetric F-P interferometric cavity with good linearity and wide dynamic range is designed. And by choosing the material of two different thin metallic layers, the asymmetric F-P interferometric cavity is successfully fabricated. The design theory and method of this asymmetric F-P interferometric cavity have been described in detailed. In this paper an asymmetric F-P interferometric cavity used in fiber optical sensor is reported.展开更多
基金the Fundamental Research Foundation of Harbin Engineering University, (grant number HEUF 04017)
文摘A type of combined optical fiber interferometric acoustic emission sensor is proposed. The sensor can be independent on the laser source and make light interference by matching the lengths of two arms,so it can be used to monitor the health of large structure. Theoretical analyses indicate that the system can be equivalent to the Michelson interferometer with two optical fiber loop reflectors,and its sensitivity has been remarkably increased because of the decrease of the losses of light energy. PZT is powered by DC regulator to control the operating point of the system,so the system can accurately detect feeble vibration which is generated by ultrasonic waves propagating on the surface of solid. The amplitude and the frequency of feeble vibration signal are obtained by detecting the output light intensity of interferometer and using Fourier transform technique. The results indicate that the system can be used to detect the acoustic emission signals by the frequency characteristics.
基金This work was supported by the State Key Laboratory of Mining Disaster Prevention and Control,Shandong University of Science and Technology(Grant Nos.MDPC201602 and MDPC2022ZR04)Department of Education1of Shandong Province(Grant No.J06P14)+1 种基金The Qingdao Feibo Technology Co.,Ltd.(Grant No.02040102401)Postdoctoral Research Foundation of China(Grant Nos.200902574 and 20080441150).
文摘In view of the problem that the sensing characteristics of the multi-mode interferometric fiber sensors cannot be accurately analyzed,an analysis method based on the fast Fourier transform(FFT)and inverse fast Fourier transform(IFFT)is proposed and demonstrated theoretically and experimentally.The suitabilities of the rectangular window function with the narrow main lobe(high spectrum resolution)and low side lobe(high main mode energy leakage)and the Hanning window function with the wide main lobe(low spectrum resolution)and high side lobe(high energy concentration)in this kind of sensor analysis are discussed,respectively.This method can not only realize the sensing performance analysis of the various modes,but also overcome the inconsistency of the different interference wavelength(dip)sensing characteristics in the conventional analysis methods.At the same time,this method is also beneficial to solve the repetitive problem of such sensors.
文摘Fiber optic sensors have been widely used and studied in recent times. This paper presents operating principles and applications of fiber optic sensors namely reflectometric and interferometric fiber optic sensors. Majority of optical fiber sensors fall under these two broad categories. Both interferometric and reflectometric fiber optic sensors are becoming popular for their ease of use, flexibility, long distance sensing, and potentially noise free detection. Also, these sensors can easily be used in various applications such as structural health monitoring, perimeter intrusion detection, temperature monitoring, and other numerous applications. This paper broadly classifies fiber optic sensors into two subtypes. The paper further highlights different sensors based on their sensing resolution, range, spatial advantages, and applications.
基金This work was supported by the National Natural Science Foundation of China under Grant No.60673152
文摘Optical fiber interferometric sensors based on [3×3] couplers have been used in many fields. A new technique is proposed to demodulate output signals of this kind of sensors. The technique recovers the signal of interest by fitting coefficients of elliptic （Lissajous） curves between each fiber pair. Different from other approaches, this technique eliminates the dependence on the idealization of [3×3] coupler, provides enhanced tolerance to the variance of photoelectric converters, and is anti-polarization in a certain extent. The main algorithm has been successfully demonstrated both by numerical simulation and experimental result.
基金This work was supported by the National "863" Project of China (No. 2003AA311022)the National "973" Project of China (No. 2004CB719804)the National Natural Science Foundation of China (No. 10274108)the Natural Science Foundation of Guangdong Province of China.
文摘Good linearity and wide dynamic range are the advantages of asymmetric Fabry-Pérot （F-P） interferometric cavity, whose realization has been long for. Based on optical thin film characteristic matrix theory, an asymmetric F-P interferometric cavity with good linearity and wide dynamic range is designed. And by choosing the material of two different thin metallic layers, the asymmetric F-P interferometric cavity is successfully fabricated. The design theory and method of this asymmetric F-P interferometric cavity have been described in detailed. In this paper an asymmetric F-P interferometric cavity used in fiber optical sensor is reported.
