The spectral methods and ice-induced fatigue analysis are discussed based on Miner＇s linear cumulative fatigue hypothesis and S-N curve data. According to the long-term data of full-scale tests on the platforms in th...The spectral methods and ice-induced fatigue analysis are discussed based on Miner＇s linear cumulative fatigue hypothesis and S-N curve data. According to the long-term data of full-scale tests on the platforms in the Bohai Sea, the ice force spectrum of conical structures and the fatigue environmental model are established. Moreover, the finite element model of JZ20-2MSW platform, an example of ice-induced fatigue analysis, is built with ANSYS software. The mode analysis and dynamic analysis in frequency domain under all kinds of ice fatigue work conditions are carded on, and the fatigue life of the structure is estimated in detail. The methods in this paper can be helpful in ice-induced fatigue analysis of ice-resistant platforms.展开更多
Water is the most active component in all geological systems. It has an importanteffect on the physical properties of minerals and melts. It also plays a key role in the evolutionof the Earth. Accurate thermodynamics ...Water is the most active component in all geological systems. It has an importanteffect on the physical properties of minerals and melts. It also plays a key role in the evolutionof the Earth. Accurate thermodynamics data on water are currently confined to pressures below1.0 GPa and temperatures below 900℃. Presented in this paper are new data available on theP-T properties of water at pressures up t0 5. 0 GPa, developed from differential thermal analysis and ultrasonic wave amplitude analysis. It has been found that there may exist anotherternary point at 3. 0 GPa and that ultrasonic wave amplitude change of ice-water transitionshows two inflection points above 2. 0 GPa, consistent with the two peaks of differential thermal curves above 2. 0 GPa. It may be a new phenomenon which needs further study.展开更多
At present, the on-line monitoring is widely applied to the power line monitoring. In this paper, a new mechanical calculation model is established according to the on-line monitoring. And this model is based on the p...At present, the on-line monitoring is widely applied to the power line monitoring. In this paper, a new mechanical calculation model is established according to the on-line monitoring. And this model is based on the parameters that tension sensors and angle sensors on suspended points detect, and combines with the parameters of the wire itself, and also considers the deflection angel of wires due to wind. In this model, mechanics parameters of wires are turned into the new coordinate plane after deflection angel of wires due to wind, or windage yaw plane. A statics tension balance equation is built in the vertical direction of the new windage yaw plane. According to the theoretical analysis and algorithm, we verify the accuracy of this newly developed mechanical calculation model.展开更多
Structuralism and generative approach are two representative syntax theories, which study language from different perspectives. They employ different methodologies i.e. Immediate constituent(IC) Analysis and transform...Structuralism and generative approach are two representative syntax theories, which study language from different perspectives. They employ different methodologies i.e. Immediate constituent(IC) Analysis and transformational-generative(TG)approach to make syntactical analysis. In this paper, these two methods will be applied to analyze some sentences for further discussion and comparison. After analysis by examples, we find that both these two methods have their merits and inadequacies. To some extent, TG method can help IC analysis solve some problems. However, TG grammar is by no means complete and perfect.Improvements are needed to reach its ultimate goal of producing a universal grammar for all human languages.展开更多
Phylogenetic analysis based on 16S rDNA of 8 strains of cultivable bacteria isolated from Arctic sea-ice was studied.The results showed that strain BJ1 belonged to genus Planococcus,which was a genus of low mole perce...Phylogenetic analysis based on 16S rDNA of 8 strains of cultivable bacteria isolated from Arctic sea-ice was studied.The results showed that strain BJ1 belonged to genus Planococcus,which was a genus of low mole percent G+C gram-positive bacteria;strain BJ6 belonged to genus Burkholderia of β-proteobacteria and the rest 6 strain all belonged to γ-proteobacteria,of which strain BJ8 was a species of Pseudoalteromonas,strain BJ2-BJ5 and BJ7 were members of genus Psychrobacter.Phylogenetic analysis also indicated that bacteria of genus Psychrobacter of the isolates formed a relatively independent phylogenetic cluster in comparison with other bacteria belonged to genus Psychrobacter.展开更多
Objective This study proposes to visually review the current situation and progress of standards sets by the International Organization for Standardization/Technical Committee on Traditional Chinese Medicine(ISO/TC 24...Objective This study proposes to visually review the current situation and progress of standards sets by the International Organization for Standardization/Technical Committee on Traditional Chinese Medicine(ISO/TC 249). The review aims to explore the development strategies of the standards, which will exhibit the considerable impact on the economy, trade and exchanges, and cooperation in the area of traditional Chinese medicine(TCM).Methods ISO/TC 249 standards were searched on the ISO website, and their title, proposed time, current stage, scope, and classification were obtained for further summarization. Gephi was utilized to portray the co-occurrence network graph of the ISO/TC 249 standards subject.Results In ISO/TC 249, there were 116 standards, including 81 published standards and 35 developing standards by April 30, 2022. Two withdrawal standards were published after revision, which were not counted in the total standards. The number of published standards has been increasing since the first standard was published in 2014, whose title was “Sterile acupuncture needles for single use”. Among these standards, 17.24%(20/116) standards were in review, 56.03%(65/116) in publication, 3.45%(4/116) in approval, 5.17%(6/116) in enquiry,3.45%(4/116) in committee, and 14.66%(17/116) in preparation, respectively. With 116 standards, most of the research focused on the medicament, as its classification of the International Classification for Standards(ICS) showed the proportion reaching 49.54%. The network analysis data revealed that the top five most frequent words were “materials” “root” “requirements” “products” and “system”, after removing the noise data, such as prepositions,conjunctions, and pronouns. Additionally, the word “system” co-exists with the terms “computerized” “coding” “image” “tongue” and “analysis”;the word “requirement” co-exists with“manufacturing” “decoction” “process” and “materials”;whereas the word “devices” coexists with “pulse” “electric” “skin” and “measurement”.Conclusion With the increased diversification and complexity of problems, the development of standards is also oriented to multidisciplinary fields to cultivate the interdisciplinary talents, and especially the international standardization talents of compound TCM. Multi-angle analysis, formulation, and demonstration of standards, in line with industry needs in different disciplines, enhance the availability of standards and the ability to serve the industry.展开更多
The Lindqvist method is adopted to estimate the ice resistance for an icebreaker.The accuracy of the method is evaluated in a comparison of the calculated results with model test results.In addition to the estimation ...The Lindqvist method is adopted to estimate the ice resistance for an icebreaker.The accuracy of the method is evaluated in a comparison of the calculated results with model test results.In addition to the estimation of ice resistance,a sensitivity analysis based on the Lindqvist method is carried out.A full parametric model developed using CAESES software allows the convenient construction of many new hull lines.The primary factors relevant to ice resistance are embedded as design parameters in the full parametric model.Meanwhile,response surface methodology is adopted to give better insight into new hull lines.Results show that the ice resistance is more sensitive to the rake angle and waterline entrance angle.The aim of the present study is to improve the techniques of designing the hull forms of icebreakers.展开更多
基金The paper was supported by the National 863 High Technology Develpoment Plan Project(Grant No.2001AA602015)
文摘The spectral methods and ice-induced fatigue analysis are discussed based on Miner＇s linear cumulative fatigue hypothesis and S-N curve data. According to the long-term data of full-scale tests on the platforms in the Bohai Sea, the ice force spectrum of conical structures and the fatigue environmental model are established. Moreover, the finite element model of JZ20-2MSW platform, an example of ice-induced fatigue analysis, is built with ANSYS software. The mode analysis and dynamic analysis in frequency domain under all kinds of ice fatigue work conditions are carded on, and the fatigue life of the structure is estimated in detail. The methods in this paper can be helpful in ice-induced fatigue analysis of ice-resistant platforms.
文摘Water is the most active component in all geological systems. It has an importanteffect on the physical properties of minerals and melts. It also plays a key role in the evolutionof the Earth. Accurate thermodynamics data on water are currently confined to pressures below1.0 GPa and temperatures below 900℃. Presented in this paper are new data available on theP-T properties of water at pressures up t0 5. 0 GPa, developed from differential thermal analysis and ultrasonic wave amplitude analysis. It has been found that there may exist anotherternary point at 3. 0 GPa and that ultrasonic wave amplitude change of ice-water transitionshows two inflection points above 2. 0 GPa, consistent with the two peaks of differential thermal curves above 2. 0 GPa. It may be a new phenomenon which needs further study.
文摘At present, the on-line monitoring is widely applied to the power line monitoring. In this paper, a new mechanical calculation model is established according to the on-line monitoring. And this model is based on the parameters that tension sensors and angle sensors on suspended points detect, and combines with the parameters of the wire itself, and also considers the deflection angel of wires due to wind. In this model, mechanics parameters of wires are turned into the new coordinate plane after deflection angel of wires due to wind, or windage yaw plane. A statics tension balance equation is built in the vertical direction of the new windage yaw plane. According to the theoretical analysis and algorithm, we verify the accuracy of this newly developed mechanical calculation model.
文摘Structuralism and generative approach are two representative syntax theories, which study language from different perspectives. They employ different methodologies i.e. Immediate constituent(IC) Analysis and transformational-generative(TG)approach to make syntactical analysis. In this paper, these two methods will be applied to analyze some sentences for further discussion and comparison. After analysis by examples, we find that both these two methods have their merits and inadequacies. To some extent, TG method can help IC analysis solve some problems. However, TG grammar is by no means complete and perfect.Improvements are needed to reach its ultimate goal of producing a universal grammar for all human languages.
文摘Phylogenetic analysis based on 16S rDNA of 8 strains of cultivable bacteria isolated from Arctic sea-ice was studied.The results showed that strain BJ1 belonged to genus Planococcus,which was a genus of low mole percent G+C gram-positive bacteria;strain BJ6 belonged to genus Burkholderia of β-proteobacteria and the rest 6 strain all belonged to γ-proteobacteria,of which strain BJ8 was a species of Pseudoalteromonas,strain BJ2-BJ5 and BJ7 were members of genus Psychrobacter.Phylogenetic analysis also indicated that bacteria of genus Psychrobacter of the isolates formed a relatively independent phylogenetic cluster in comparison with other bacteria belonged to genus Psychrobacter.
基金National Key Research and Development Program of China (2018YFC1707606)Sichuan Provincial Administration of Traditional Chinese Medicine (2022MS500)+1 种基金Chengdu Science and Technology Department Project(2019-YF09-00185-SN)Xinglin Scholar Research Promotion Project of Chengdu University of Traditional Chinese Medicine (MPRC2021022)。
文摘Objective This study proposes to visually review the current situation and progress of standards sets by the International Organization for Standardization/Technical Committee on Traditional Chinese Medicine(ISO/TC 249). The review aims to explore the development strategies of the standards, which will exhibit the considerable impact on the economy, trade and exchanges, and cooperation in the area of traditional Chinese medicine(TCM).Methods ISO/TC 249 standards were searched on the ISO website, and their title, proposed time, current stage, scope, and classification were obtained for further summarization. Gephi was utilized to portray the co-occurrence network graph of the ISO/TC 249 standards subject.Results In ISO/TC 249, there were 116 standards, including 81 published standards and 35 developing standards by April 30, 2022. Two withdrawal standards were published after revision, which were not counted in the total standards. The number of published standards has been increasing since the first standard was published in 2014, whose title was “Sterile acupuncture needles for single use”. Among these standards, 17.24%(20/116) standards were in review, 56.03%(65/116) in publication, 3.45%(4/116) in approval, 5.17%(6/116) in enquiry,3.45%(4/116) in committee, and 14.66%(17/116) in preparation, respectively. With 116 standards, most of the research focused on the medicament, as its classification of the International Classification for Standards(ICS) showed the proportion reaching 49.54%. The network analysis data revealed that the top five most frequent words were “materials” “root” “requirements” “products” and “system”, after removing the noise data, such as prepositions,conjunctions, and pronouns. Additionally, the word “system” co-exists with the terms “computerized” “coding” “image” “tongue” and “analysis”;the word “requirement” co-exists with“manufacturing” “decoction” “process” and “materials”;whereas the word “devices” coexists with “pulse” “electric” “skin” and “measurement”.Conclusion With the increased diversification and complexity of problems, the development of standards is also oriented to multidisciplinary fields to cultivate the interdisciplinary talents, and especially the international standardization talents of compound TCM. Multi-angle analysis, formulation, and demonstration of standards, in line with industry needs in different disciplines, enhance the availability of standards and the ability to serve the industry.
文摘The Lindqvist method is adopted to estimate the ice resistance for an icebreaker.The accuracy of the method is evaluated in a comparison of the calculated results with model test results.In addition to the estimation of ice resistance,a sensitivity analysis based on the Lindqvist method is carried out.A full parametric model developed using CAESES software allows the convenient construction of many new hull lines.The primary factors relevant to ice resistance are embedded as design parameters in the full parametric model.Meanwhile,response surface methodology is adopted to give better insight into new hull lines.Results show that the ice resistance is more sensitive to the rake angle and waterline entrance angle.The aim of the present study is to improve the techniques of designing the hull forms of icebreakers.
