Dynamic modelling and engineering simulation of fluid mechanics in water injectors

To study the fluid dynamic response mechanism under the working condition of water injection well borehole,based on the microelement analysis of fluid mechanics and the classical theory of hydrodynamics,a fluid microelement pressure-flow rate relationship model is built to derive and solve the dynamic distribution of fluid pressure and flow rate in the space of well borehole.Combined with the production data of a typical deviated well in China,numerical simulations and analyses are carried out to analyze the dynamic distribution of wellbore pressure at different injection pressures and injection volumes,the delayed and attenuated characteristics of fluid transmission in tube,and the dynamic distribution of wellbore pressure amplitude under the fluctuation of wellhead pressure.The pressure loss along the wellbore has nothing to do with the absolute pressure,and the design of the coding and decoding scheme for wave code communication doesn’t need to consider the absolute pressure during injecting.When the injection pressure is constant,the higher the injection flow rate at the wellhead,the larger the pressure loss along the wellbore.The fluid wave signal delay amplitude mainly depends on the length of the wellbore.The smaller the tubing diameter,the larger the fluid wave signal attenuation amplitude.The higher the target wave code amplitude(differential pressure identification root mean square)generated at the same well depth,the greater the wellhead pressure wave amplitude required to overcome the wellbore pressure loss.

Magmatic-hydrothermal Evolution and Mineralization Mechanisms of the Wangjiazhuang Cu(-Mo)Deposit in the Zouping Volcanic Basin,Shandong Province,China:Constraints from Fluid Inclusions

The Wangjiazhuang Cu(-Mo)deposit,located within the Zouping volcanic basin in western Shandong Province,China,is unique in this area for having an economic value.In order to expound the metallogenetic characteristics of this porphyry-like hydrothermal deposit,a detailed fluid inclusion study has been conducted,employing the techniques of representative sampling,fluid inclusion petrography,microthermometry,Raman spectroscopy,LA-ICP-MS analysis of single fluid inclusions,as well as cathode fluorescence spectrometer analysis of host mineral quartz.The deposit contains mainly two types of orebodies,i.e.veinlet-dissemination-stockwork orebodies in the K-Si alteration zone and pegmatiticquartz sulfide veins above them.In addition,minor breccia ore occurs locally.Four types of fluid inclusions in the deposit and altered quartz monzonite are identified:L-type one-or two-phase aqueous inclusions,V-type vapor-rich inclusions with V/L ratios greater than 50%-90%,D-type multiphase fluid inclusions containing daughter minerals or solids and S-type silicate-bearing fluid inclusions containing mainly muscovite and biotite.Ore petrography and fluid inclusion study has revealed a three-stage mineralization process,driven by magmatic-hydrothermal fluid activity,as follows.Initially,a hydrothermal fluid,separated from the parent magma,infiltrated into the quartz monzonite,resulting in its extensive K-Si alteration,as indicated by silicate-bearing fluid inclusions trapped in altered quartz monzonite.This is followed by the early mineralization,the formation of quartz veinlets and dissemination-stockwork ores.During the main mineralization stage,due to the participation and mixing of meteoric groundwater with magmatic-sourced hydrothermal fluid,the cooling and phase separation caused deposition of metals from the hydrothermal fluids.As a result,the pegmatitic-quartz sulfide-vein ores formed.In the late mineralization stage,decreasing fluid salinity led to the formation of L-type aqueous inclusions and chalcopyrite-sulfosalt ore.Coexistence of V-type and D-type inclusions and their similar homogenization temperatures with different homogenization modes suggest that phase separation or boiling of the ore-forming fluids took place during the early and the main mineralization stages.The formation P-T conditions of S-type inclusions and the early and the main mineralization stages were estimated as ca.156-182 MPa and 450-650℃,350-450℃,18-35 MPa and 280-380℃,8-15 MPa,respectively,based on the microthermometric data of the fluid inclusions formed at the individual stages.

引进《Fluid Mechanics》全英文课程教学的探索与实践

引进国际知名大学高水平课程是培养高水平国际化人才的重要途径。介绍了新加坡国立大学《Fluid Mechanics》课程的引进情况,对该课程在新加坡国立大学的教学情况和教学特点进行了深入的分析。针对中国大学的特点和学生情况,对该课程在国内大学的实施进行了探索,连续三届教学实践证明该课程的引进是成功的,学生也有很高的满意度,达到了预期的效果。

A Unified Variational Principle of Fluid Mechanics and Application on Solitary Subdomain or Point

-According to basic equations of fluid mechanics, this paper presents a unified variational principle of fluid mechanics (UVPFM) by using the optimization method of weighted residuals (OMWR). The advantages are as follows, the establishment of the functional and the variational principle is easy, it can change various problems of fluid mechanics derived by basic equations into a unified optimization problem, and the solution is the optimum one in some sense. According to the OMWR for the solitary subdomain, this paper uses UVPFM onto any solitary subdomain and gives the solution of the hydrodynamics equation which is suitable only for that solitary subdomain. According to the OMWR for solitary point, this paper uses UVPFM to any solitary point and gives the solution of the hydrodynamics equation (point solution) which is suitable only for that solitary point. As the solution for the solitary subdomain or solitary point is developed independently, the compatibility with other subdomain or other points, does not need to be considered, but all the boundary conditions and the supplementary derived residual equations obtained by running the derivative operations to the differential equation should be taken into account.

Application of multi-dimensional wavelet transform to fluid mechanics

This paper first reviews the application research works of wavelet transform on the fluid mechanics. Then the theories of continuous wavelet transform and multi-dimensional orthogonal(discrete) wavelet transform, including wavelet multiresolution analysis, are introduced. At last the applications of wavelet transform on 2 D and 3 D turbulent wakes and turbulent boundary layer flows are described based on the hot-wire, 2 D particle image velocimetry(PIV) and 3 D tomographic PIV.

Fluid Mechanics and Heat-Transfer Operations Combination Involved in Urea Unit of Fertilizer Complex

Fertilizer plants are most complex plants in the world (Rashid et al., 2013, Process Safety Progress) and its good opportunity to learn science from operations involved in these plants. Fluid mechanics and heat transfer operations combination involved in fertilizer complexes are explored in this article.

Analysis of a Propeller Wake Flow Field Using Viscous Fluid Mechanics

计算液体动力学(CFD ) 方法被用来数字地模仿一个推进器在开的水里弄醒流动地。一个子域混血儿网孔方法在这篇论文被采用。计算领域被分开成二子域，有四面的元素在内部领域在被使用匹配推进器的复杂几何学，当具有六面的元素在外部领域被使用时。网孔局部地在推进器表面上并且在 wake 流动域附近被精制，并且一个尺寸函数被用来控制格子的生长率。在不同轴的地点的节被用来学习推进器的空间进化在下游地从圆盘到一推进器直径(D) 的区域醒来。数字结果证明轴的速度沿着 wake 流动波动；光线的速度，它是仔细与旋涡有关，强烈稀释。后面的旋涡在落后于边的片与尖端旋涡交往然后分开。旋涡的力量很快缩小，并且半径减少 20% 在一条直径下游。

Numerical method and analysis of computational fluid mechanics for photoelectric semiconducting detector

We propose a modified upwind finite difference fractional step scheme for the computational fluid mechanics simulations of a three-dimensional photoelectric semiconductor detector. We obtain the optimal l^2-norm error estimates by using the techniques including the calculus of variations, the energy methods, the induction hypothesis, and a priori estimates. The proposed scheme is successfully applied to the simulation of the photoelectric semiconductor detectors.

FLUID MECHANICS OF MICROVASCULAR VASOMOTION AND THE EFFECTS OF BLOOD VISCOELASTICITY

This paper deals with blood flow caused by microvascular vasomotion with the focus on the effects of blood viscoelasticity on the pressure rise and wall resistance. It is shown that microvascular vasomotion plays a role of the 'second heart' of the body which is of importance in conveying blood, and that the effects of blood viscoelasticity greatly depend on the Weissenberg number and mean flow rate.

A UNIVERSAL VARIATIONAL FORMULATION FOR TWO DIMENSIONAL FLUID MECHANICS

A universal variational formulation for two dimensional fluid mechanics is obtained. which is subject to the so-called parameter-constrained equations (the relationship between parameters in two governing equations). By eliminating the constraints the generalized variational principle (GVPs) can be readily derived from the formulation The formulation can be applied to any conditions in case the governing equations can be converted into conservative forms. Some illustrative examples are given to testify the effectiveness and simplicity of the method.

A two-phase type-curve method with multiscale fluid transport mechanisms in hydraulically fractured shale reservoirs

The quantitative understanding of hydraulic fracture(HF)properties guides accurate production forecasts and reserve estimation.Type curve is a powerful technique to characterize HF and reservoir properties from flowback and long-term production data.However,two-phase flow of water and hydrocarbon after an HF stimulation together with the complex transport mechanisms in shale nanopores exacerbate the nonlinearity of the transport equation,causing errors in type-curve analysis.Accordingly,we propose a new two-phase type-curve method to estimate HF properties,such as HF volume and permeability of fracture,through the analysis of flowback data of multi-fractured shale wells.The proposed type curve is based on a semianalytical solution that couples the two-phase flow from the matrix with the flow in HF by incorporating matrix influx,slippage effect,stress dependence,and the spatial variation of fluid properties in inorganic and organic pores.For the first time,multiple fluid transport mechanisms are considered into two-phase type-curve analysis for shale reservoirs.We analyze the flowback data from a multi-fractured horizontal well in a shale gas reservoir to verify the field application of the proposed method.The results show that the fracture properties calculated by the type-curve method are in good agreement with the long-time production data.

Feature Selection with Fluid Mechanics Inspired Particle Swarm Optimization for Microarray Data

Deoxyribonucleic acid（ DNA） microarray gene expression data has been widely utilized in the field of functional genomics,since it is helpful to study cancer,cells,tissues,organisms etc.But the sample sizes are relatively small compared to the number of genes,so feature selection is very necessary to reduce complexity and increase the classification accuracy of samples. In this paper,a completely newimprovement over particle swarm optimization（ PSO） based on fluid mechanics is proposed for the feature selection. This newimprovement simulates the spontaneous process of the air from high pressure to lowpressure,therefore it allows for a search through all possible solution spaces and prevents particles from getting trapped in a local optimum. The experiment shows that,this newimproved algorithm had an elaborate feature simplification which achieved a very precise and significant accuracy in the classification of 8 among the 11 datasets,and it is much better in comparison with other methods for feature selection.

Using Image Processing Technology and General Fluid Mechanics Principles to Model Smoke Diffusion in Forest Fires

In the present study,the laws of smoke diffusion during forest fires are determined using the general principles of fluid mechanics and dedicated data obtained experimentally using an“ad hoc”imaging technology.Experimental images mimicking smoke in a real scenario are used to extract some“statistics”.These in turn are used to obtain the“divergence”of the flow(this fluid-dynamic parameter describing the amount of air that converges to a certain place from the surroundings or vice versa).The results show that the divergence of the smoke depends on the outside airflow and finally tends to zero as time passes.Most remarkably,compared with clouds and fog,smoke has a unique dynamic time-evolution curve.The present study demonstrates that as long as image processing technology and intelligent monitoring technology are used to monitor the gas flow in a forest,the occurrence of forest fires can be quickly diagnosed.

High-temperature corrosion of phosphate completion fluid and corrosion inhibition method by membrane transformation

By analyzing the corrosion of phosphate completion fluid on the P110 steel at 170 °C, the high-temperature corrosion mechanism of phosphate completion fluid was revealed, and a corrosion inhibition method by membrane transformation was proposed and an efficient membrane-forming agent was selected. Scanning electron microscope (SEM) images, X-ray energy spectrum and X-ray diffraction results were used to characterize the microscopic morphology, elemental composition and phase composition of the precipitation membrane on the surface of the test piece. The effect and mechanism of corrosion inhibition by membrane transformation were clarified. The phosphate completion fluid eroded the test piece by high-temperature water vapor and its hydrolyzed products to form a membrane of iron phosphate corrosion product. By changing the corrosion reaction path, the Zn2+ membrane-forming agent could generate KZnPO4 precipitation membrane with high temperature resistance, uniform thickness and tight crystal packing on the surface of the test piece, which could inhibit the corrosion of the test piece, with efficiency up to 69.63%. The Cu2+ membrane-forming agent electrochemically reacted with Fe to precipitate trace elemental Cu on the surface of the test piece, thus forming a protective membrane, which could inhibit metal corrosion, with efficiency up to 96.64%, but the wear resistance was poor. After combining 0.05% Cu2+ and 0.25% Zn2+, a composite protective membrane of KZnPO4 crystal and elemental Cu was formed on the surface of the test piece. The corrosion inhibition efficiency reached 93.03%, which ensured the high corrosion inhibition efficiency and generated a precipitation membrane resistant to temperature and wear.

Vibration of a Two-Layer“Metal+PZT”Plate Contacting with Viscous Fluid

The present work investigates the mechanically forced vibration of the hydro-elasto-piezoelectric system consisting of a two-layer plate“elastic+PZT”,a compressible viscous fluid,and a rigid wall.It is assumed that the PZT(piezoelectric)layer of the plate is in contact with the fluid and time-harmonic linear forces act on the free surface of the elastic-metallic layer.This study is valuable because it considers for the first time the mechanical vibration of the metal+piezoelectric bilayer plate in contact with a fluid.It is also the first time that the influence of the volumetric concentration of the constituents on the vibration of the hydro-elasto-piezoelectric system is studied.Another value of the present work is the use of the exact equations and relations of elasto-electrodynamics for elastic and piezoelectric materials to describe the motion of the plate layers within the framework of the piecewise homogeneous body model and the use of the linearized Navier-Stokes equations to describe the flow of the compressible viscous fluid.The plane-strain state in the plate and the plane flow in the fluid take place.For the solution of the corresponding boundary-value problem,the Fourier transform is used with respect to the spatial coordinate on the axis along the laying direction of the plate.The analytical expressions of the Fourier transform of all the sought values of each component of the system are determined.The origins of the searched values are determined numerically,after which numerical results on the stress on the fluid and plate interface planes are presented and discussed.These results are obtained for the case where PZT-2 is chosen as the piezoelectric material,steel and aluminum as the elastic metal materials,and Glycerin as the fluid.Analysis of these results allows conclusions to be drawn about the character of the problem parameters on the frequency response of the interfacial stress.In particular,it was found that after a certain value of the vibration frequency,the presence of the metal layer in the two-layer plate led to an increase in the absolute values of the above interfacial stress.

Deep Learning Applied to Computational Mechanics:A Comprehensive Review,State of the Art,and the Classics

Three recent breakthroughs due to AI in arts and science serve as motivation:An award winning digital image,protein folding,fast matrix multiplication.Many recent developments in artificial neural networks,particularly deep learning(DL),applied and relevant to computational mechanics(solid,fluids,finite-element technology)are reviewed in detail.Both hybrid and pure machine learning(ML)methods are discussed.Hybrid methods combine traditional PDE discretizations with ML methods either(1)to help model complex nonlinear constitutive relations,(2)to nonlinearly reduce the model order for efficient simulation(turbulence),or(3)to accelerate the simulation by predicting certain components in the traditional integration methods.Here,methods(1)and(2)relied on Long-Short-Term Memory(LSTM)architecture,with method(3)relying on convolutional neural networks.Pure ML methods to solve(nonlinear)PDEs are represented by Physics-Informed Neural network(PINN)methods,which could be combined with attention mechanism to address discontinuous solutions.Both LSTM and attention architectures,together with modern and generalized classic optimizers to include stochasticity for DL networks,are extensively reviewed.Kernel machines,including Gaussian processes,are provided to sufficient depth for more advanced works such as shallow networks with infinite width.Not only addressing experts,readers are assumed familiar with computational mechanics,but not with DL,whose concepts and applications are built up from the basics,aiming at bringing first-time learners quickly to the forefront of research.History and limitations of AI are recounted and discussed,with particular attention at pointing out misstatements or misconceptions of the classics,even in well-known references.Positioning and pointing control of a large-deformable beam is given as an example.

MY WORK IN THE FIELD OF FLUID MECHANICS

I graduated from the National Peiyang University (now called Tianjin University) in 1950, majoring in hydraulic engineering. Starting from 1952, my teaching work was basically in mechanics.My first academic probe was in cybernetics, resulting in the publication of the first Chinese paper concerning optimal control. After 1963, I worked on the theory of hydrodynamic stability. My explorative thrust is at the eigenvalues of the Orr Sommerfeld Equation,a non-self adjoint problem in

Painlevé Analysis,Soliton Solutions and Bcklund Transformation for Extended (2 + 1)-Dimensional Konopelchenko-Dubrovsky Equations in Fluid Mechanics via Symbolic Computation

This paper is to investigate the extended(2+1)-dimensional Konopelchenko-Dubrovsky equations,which can be applied to describing certain phenomena in the stratified shear flow,the internal and shallow-water waves, plasmas and other fields.Painleve analysis is passed through via symbolic computation.Bilinear-form equations are constructed and soliton solutions are derived.Soliton solutions and interactions are illustrated.Bilinear-form Backlund transformation and a type of solutions are obtained.

大跨度公铁双层斜拉桥主梁涡激共振机理与控制

以拟建的某主跨808 m公铁双层斜拉桥为工程依托,采用节段模型风洞试验研究不同攻角下双层桁架梁断面的涡振性能及5种气动控制措施的抑振效果,结合计算流体动力学(CFD)静态绕流模拟,对比分析双层桁架梁断面的涡振机理及控制方法.研究表明:主梁断面原设计方案在+3°和0°风攻角下存在明显的竖向和扭转涡振现象,且振幅超过规范允许值;间隔封闭上层桥面栏杆或增设抑流板可有效抑制主梁扭转涡振,但竖向涡振振幅仍不满足规范要求;上弦杆外侧增设风嘴可有效抑制主梁竖向和扭转涡振,而下弦杆外侧增设风嘴对主梁涡振抑振效果有限.气流经主梁原设计断面上层桥面分离后,在其上下表面形成周期性脱落的大尺度旋涡,并在上层桥面后部再附,这是主梁发生竖向涡振的主要诱因;上弦杆外侧增设风嘴可引导气流平稳通过上层桥面,消除了周期性的旋涡脱落,并在其上表面形成一段狭长“回流区”,从而有效抑制了涡振的发生.