Biostratigraphy of the Abderaz Formation Based on Heterohelicids, at Six Stratigraphical Sections in East and Center of the Kopeh-Dagh Sedimentary Basin, Northeastern of Iran

In this study, Abderaz Formation at six stratigraphical sections, in east and center of the Kopeh-Dagh sedimentary basin, has been investigated, based on biserial planktonic foraminifera. Totally, 831 samples, with 3 meter distance, were gathered from a sequence with 2800 meter thickness. Also 4 genera and 17 species of biserial planktonic foraminifera have been identified and two biozones and two subzones recognized. Based on obtained data, the age of Early Turonian-Earliest Campanian for the Padeha, Abderaz village and Shorab sections, Midle Turonian-Earliest Campanian for type section, Early Turonian-Late Santonian for Qarehso section and Early Turonian-Earliest Santonian for Hajgelichkhan section were determined. The least amount of plank-tonic foraminifera was identified at Hajgelichkhan, while the maximum amount recognized at Qarehso section.

Callovian-Oxfordian sedimentary microfacies in the middle of Block B on the right bank of the Amu Darya Basin,Turkmenistan

The right bank of the Amu Darya Basin enjoys abundant natural gas resources,on which the Callovian-Oxfordian strata in the middle of Block B serve as the major horizons for natural gas production.However,the characteristics and distribution patterns of the sedimentary microfacies in these strata are yet to be further explored.Based on the analysis of data on drilling,logging,cores,and thin sections from 29 typical wells,as well as the regional sedimentary background,this study inferred that the middle of Block B evolved from the Callovian ramp platform into the Oxfordian rimmed platform.Moreover,this study determined that the inner-ramp intertidal-subtidal shallow-water subfacies mainly developed during the Callovian and transitioned into the shallow shelf subfacies during the Oxfordian.This study identified eight sedimentary microfacies,namely reef knoll,reef-shoal complex,bioclastic shoal,psammitic shoal,bioherm,lime mud mound,intershoal(intermound),and static-water mud.Based on research into the high-precision sequence-sedimentary microfacies framework,this study built a geological model for the development of sedimentary microfacies in the study area.According to this geological model,the sedimentary microfacies in the study area are characterized by vertical alternation of reef-shoal complex,bioclastic(psammitic)shoal,bioherm,and intershoal microfacies.Moreover,they show the development of reef knoll,reef-shoal complex,bioclastic(psammitic)shoal,and bioherm(or lime mud mound)laterally from west to east,with the physical properties of the reservoirs deteriorating from west to east accordingly.The microfacies of reef-shoal complex and the bioclastic(psammitic)shoal predominate in the study area,and their deposition and development are controlled by sequence boundaries and are also affected by paleo-landforms.The Oxfordian reef-shoal complexes were largely inherited from the Callovian uplifts and show lateral seaward progradation.

Prediction of favorable geological storage areas based on sedimentary characteristics:A case study on the northeastern Ordos Basin,China

The Ordos Basin is a large cratonic basin with stable deposition in Northwest China.Given its mostly stable subsidence background and the urgent need for saline water disposal and carbon dioxide storage in the coal mining and coal chemical industries,the Ordos Basin has been chosen as a pilot demonstration site for carbon dioxide and saline water storage in China.However,few studies have been made to evaluate the sedimentary and sequence stratigraphy characteristics of this region,as well as their influence on carbon dioxide and saline water storage potential.To address this research gap,we conducted a sedimentary study of the Lower Triassic Liujiagou Formation in the northeastern Ordos Basin utilizing the stratigraphy theory,laboratory test analysis,and pilot project demonstration,to evaluate the area's viability for the deep geological storage of gas and liquid waste.We studied the tectonic setting,petrological features,and sedimentary characteristics of the favorable strata and predicted favorable areas based on sequence stratigraphy theory.The lithology predominantly consists of feldspathic graywacke,with a fine grain size and mostly fine-to-medium-grained sandstone.The distribution of thick-grained sandstone and fine-grained sediment was identified by dividing the sequence,and a favorable reservoir-cap assemblage configuration was formed.It's concluded that the Lower Triassic Liujiagou Formation exhibits suitable characteristics for the deep geological storage of carbon dioxide and saline water.This study demonstrates the importance of basic theory in guiding practical applications and provides a reference for the scientific selection of favorable areas for deep basin storage.

Sedimentary systems of the Oligocene Huagang Formation in the central anticline zone of the Xihu Depression,East China Sea Shelf Basin

The Xihu Depression is the largest hydrocarbon-bearing depression of the East China Sea Shelf Basin(also referred to as the ECSSB).However,the depositional systems and reservoir distribution of the Oligocene Huagang Formation in the Xihu Depression are still controversial.Under the guidance of sedimentology and stratigraphy,this study documented a marine-terrestrial transitional environment in the restricted bay setting of the Oligocene Huagang Formation through core description,well logging,and seismic data analysis.This study also revealed that the Oligocene Huagang Formation is dominated by tidal delta,estuary,and gravity flow deposits in the central anticline zone of the Xihu Depression.The new understanding of the sedimentary systems and the discovery of the transgressive gap in the eastern Diaoyu Islands uplift explain the origin of fine-grained sediments and the EW-trending sand bodies in the central depression and the sand bodies parallel to shoreline in the west slope belt,which cannot be explained by previous study results,such as southern transgression or fluvial deltas and even lacustrine deposition.Moreover,the tidal channels,tidal sand flats,and gravity flow sand bodies formed by the transgressive tides are high-quality reservoirs.The study will provide a basis for well placement and serve as guidance for the selection of favorable hydrocarbon exploration areas in the Xihu Depression.

Application of 9-component S-wave 3D seismic data to study sedimentary facies and reservoirs in a biogasbearing area:A case study on the Pleistocene Qigequan Formation in Taidong area,Sanhu Depression,Qaidam Basin,NW China

To solve the problems in restoring sedimentary facies and predicting reservoirs in loose gas-bearing sediment,based on seismic sedimentologic analysis of the first 9-component S-wave 3D seismic dataset of China,a fourth-order isochronous stratigraphic framework was set up and then sedimentary facies and reservoirs in the Pleistocene Qigequan Formation in Taidong area of Qaidam Basin were studied by seismic geomorphology and seismic lithology.The study method and thought are as following.Firstly,techniques of phase rotation,frequency decomposition and fusion,and stratal slicing were applied to the 9-component S-wave seismic data to restore sedimentary facies of major marker beds based on sedimentary models reflected by satellite images.Then,techniques of seismic attribute extraction,principal component analysis,and random fitting were applied to calculate the reservoir thickness and physical parameters of a key sandbody,and the results are satisfactory and confirmed by blind testing wells.Study results reveal that the dominant sedimentary facies in the Qigequan Formation within the study area are delta front and shallow lake.The RGB fused slices indicate that there are two cycles with three sets of underwater distributary channel systems in one period.Among them,sandstones in the distributary channels of middle-low Qigequan Formation are thick and broad with superior physical properties,which are favorable reservoirs.The reservoir permeability is also affected by diagenesis.Distributary channel sandstone reservoirs extend further to the west of Sebei-1 gas field,which provides a basis to expand exploration to the western peripheral area.

Investigation of the Petrological and Geochemical Characteristics of Siderite in the Early Cretaceous Sandstone of Lacustrine Sedimentary Sequence in the Erlian Basin from Northeastern China

Siderite is a prevalent authigenic mineral in siliciclastic rocks, which usually occurred in eodiagensis period and could be used as an indicator of sedimentary environment. Some siderite precipitated in burial depth with geochemical information of basin fluid evolution. The crystal morphology, geochemical composition, and isotope values are influenced by physical and geochemical environment of precipitation. In this study, samples from the Early Cretaceous of Erlian basin in the northwestern China were collected, and mineralogy, bulk and in-situ geochemistry, C and O isotopes were analyzed to comprehensively investigate the sedimentary and diagenetic environment that the sediments experienced. Six lithofaices with three types of crystal habits were recognized in the siderite-rich sandstone, bundle crystal in spherical forms, blocky rhombs in intergranular pore and cleavage of muscovite, and micro bundle and mosaic crystals aggregates in nodular. The siderite growth proceeds through micro bundle and mosaic crystals to bundle siderite aggregates and then into blocky rhombs. The crystal evolution is also reflected by geochemical composition. The micro bundle and mosaic crystals are Casiderite. The spheritic shaped bundle aggregates are Ca-Mn-siderite. The blocky rhomb siderite shows gray part and bight part with Ca, Mg and Mn varies. Increase of Ca in block rhomb siderite suggests burial and mesodiagenesis, the high content of Mn may have linkage with eogenetic effects. The relatively positive and slightly negative δ13C value indicates meteoric water domination and influence of organic matter evolution in shallow buried time. The narrow ranges negative δ18O value suggest a small span of temperature of siderite formation.

The Cretaceous Songliao Basin:Volcanogenic Succession,Sedimentary Sequence and Tectonic Evolution,NE China

The Songliao basin （SB） is a superposed basin with two different kinds of basin fills. The lower one is characterized by a fault-bounded volcanogenic succession comprising of intercalated volcanic, pyrodastic and epiclastic rocks. The volcanic rocks, dating from 110 Ma to 130 Ma, are of geochemically active continental margin type. Fast northward migration of the SB block occurred during the major episodes of the volcanism inferred from their paleomagnetic information. The upper one of the basin fill is dominated by non-marine sag-style sedimentary sequence of silicidastics and minor carbonates. The basin center shifted westwards from the early to late Cretaceous revealed by the GGT seismic velocity structure suggesting dynamic change in the basin evolution. Thus, a superposed basin model is proposed. Evolution of the SB involves three periods including （1） Alptian and pre- Aptian： a retroarc basin and range system of Andes type related to Mongolia-Okhotsk collisional belt （MOCB）; （2） Albian to Companian： a sag-like strike-slip basin under transtension related to oblique subduction of the Pacific plate along the eastern margin of the Eurasian plate; （3） since Maastrichtian： a tectonic inverse basin under compression related to normal subduction of the Pacific plate under the Eurasian plate, characterized by overthrust, westward migration of the depocenter and eastward uplifting of the basin margin.

Basic Types and Structural Characteristics of Uplifts:An Overview of Sedimentary Basins in China

The uplift is a positive structural unit of the crust. It is an important window for continental dynamics owing to its abundant structural phenomena, such as fault, fold, unconformity and denudation of strata. Meanwhile, it is the very place to store important minerals like oil, natural gas, coal and uranium. Giant and large-scale oil and gas fields in China, such as the Daqing Oilfield, Lunnan-Tahe Oilfield, Penglai 19-3 Oilfield, Puguang Gas Field and Jingbian Gas Field, are developed mainly on uplifts. Therefore, it is the main target both for oil and gas exploration and for geological study. The uplift can be either a basement uplift, or one developed only in the sedimentary cover. Extension, compression and wrench or their combined forces may give rise to uplifts. The development process of uplifting, such as formation, development, dwindling and destruction, can be taken as the uplifting cycle. The uplifts on the giant Precambrian cratons are large in scale with less extensive structural deformation. The uplifts on the medium- and small-sized cratons or neo-cratons are formed in various shapes with strong structural deformation and complicated geological structure. Owing to changes in the geodynamic environment, uplift experiences a multi-stage or multi-cycle development process. Its geological structure is characterized in superposition of multi-structural layers. Based on the basement properties, mechanical stratigraphy and development sequence, uplifts can be divided into three basic types-the succession, superposition and destruction ones. The succession type is subdivided into the maintaining type and the lasting type. The superposition type can be subdivided into the composite anticlinal type, the buried-hill draped type, the faulted uplift type and the migration type according to the different scales and superimposed styles of uplifts in different cycles. The destruction type is subdivided into the tilting type and the negative inverted type. The development history of uplifts and their controlling effects on sedimentation and fluids are quite different from one another, although the uplifts with different structural types store important minerals. Uplifts and their slopes are the main areas for oil and gas accumulation. They usually become the composite oil and gas accumulation zones （belts） with multiple productive formations and various types of oil and gas reservoirs.

Cenozoic uplift of the Tibetan Plateau:Evidence from the tectonic-sedimentary evolution of the western Qaidam Basin

Geologists agree that the collision of the Indian and Asian plates caused uplift of the Tibet Plateau. However, controversy still exists regarding the modes and mechanisms of the Tibetan Plateau uplift. Geology has recorded this uplift well in the Qaidam Basin. This paper analyzes the tectonic and sedimentary evolution of the western Qaidam Basin using sub-surface seismic and drill data. The Cenozoic intensity and history of deformation in the Qaidam Basin have been reconstructed based on the tectonic developments, faults growth index, sedimentary facies variations, and the migration of the depositional depressions. The changes in the sedimentary facies show that lakes in the western Qaidam Basin had gone from inflow to still water deposition to withdrawal. Tectonic movements controlled deposition in various depressions, and the depressions gradually shifted southeastward. In addition, the morphology of the surface structures in the western Qaidam Basin shows that the Cenozoic tectonic movements controlled the evolution of the Basin and divided it into （a） the southern fault terrace zone, （b） a central Yingxiongling orogenic belt, and （c） the northern fold-thrust belt; divided by the XI fault （Youshi fault） and Youbei fault, respectively. The field data indicate that the western Qaidam Basin formed in a Cenozoic compressive tectonic environment caused by the India--Asia plate collision. Further, the Basin experienced two phases of intensive tectonic deformation. The first phase occurred during the Middle Eocene--Early Miocene （Xia Ganchaigou Fm. and Shang Ganchaigou Fro., 43.8- 22 Ma）, and peaked in the Early Oligocene （Upper Xia Ganchaigou Fro., 31.5 Ma）. The second phase occurred between the Middle Miocene and the Present （Shang Youshashan Fro. and Qigequan Fro., 14.9-0 Ma）, and was stronger than the first phase. The tectonic--sedimentary evolution and the orienta- tion of surface structures in the western Qaidam Basin resulted from the Tibetan Plateau uplift, and recorded the periodic northward growth of the Plateau. Recognizing this early tectonic--sedimentary evolution supports the previous conclusion that northern Tibet responded to the collision between India and Asia shortly after its initiation. However, the current results reveal that northern Tibet also experi- enced another phase of uplift during the late Neogene. The effects of these two stages of tectonic activity combined to produce the current Tibetan Plateau.

Sedimentary and geochemical characteristics of the Triassic Chang 7 Member shale in the Southeastern Ordos Basin,Central China

The Ordos Basin is the largest petroliferous basin in China, where the Chang 7 Member shale serves as the major source rock in the basin, with an area of more than 100,000 km^2 So far, sedimentary and geochemical characterizations have rarely been conducted on the shale in shallow(< 1000 m) areas in the southeastern part of the basin, but such characterizations can help identify the genesis of organic-rich shale and promote the prediction and recovery of shale oil. In this paper,several outcrop sections of the Chang 7 Member in the Tongchuan area were observed and sampled, and sedimentary and geochemical characterizations were conducted for the well-outcropped YSC section. The study results show that the Chang7 Member shale is widely distributed laterally with variable thickness. The organic-rich shale is 7-25 m thick in total and exhibits obvious horizontal variation in mineral composition. In the eastern sections, the shale contains organic matter of TypeⅡ_2-Ⅲ and is low in thermal maturity, with high clay mineral content, low K-feldspar content, and no pyrite. In the western sections, the shale contains Type Ⅱ_1 organic matter and is low in thermal maturity, with high clay mineral, K-feldspar, and pyrite contents. The YSC section reveals three obvious intervals in vertical mineral composition and organic abundance.The Chang 7 Member organic-rich shale(TOC > 10%) contains mainly sapropelite and liptinite, with Type Ⅱ kerogen. It is generally characterized by a hydrocarbon potential of more than 70 mg/g, low maturity, and shallow-semideep lacustrine facies. In the western sections, the shale, still in a low maturity stage, has a higher hydrocarbon potential and is optional for shale oil recovery. However, the Chang 7 Member shale in the study area is highly heterogeneous and its shale oil recovery is practical only in the organic-rich intervals.

Sedimentary facies and depositional model of shallow water delta dominated by fluvial for Chang 8 oil-bearing group of Yanchang Formation in southwestern Ordos Basin,China

A systematic analysis of southwestern Ordos Basin's sedimentary characteristics,internal architectural element association styles and depositional model was illustrated through core statistics,well logging data and outcrop observations in Chang 8 oil-bearing group.This analysis indicates that shallow water delta sediments dominated by a fluvial system is the primary sedimentary system of the Chang 8 oil-bearing group of the Yanchang Formation in southwestern Ordos Basin.Four microfacies with fine grain sizes are identified: distributary channels,sheet sandstone,mouth bar and interdistributary fines.According to the sandbody's spatial distribution and internal architecture,two types of sandbody architectural element associations are identified: amalgamated distributary channels and thin-layer lobate sandstone.In this sedimentary system,net-like distributary channels at the delta with a narrow ribbon shape compose the skeleton of the sandbody that extends further into the delta front and shades into contiguous lobate distribution sheet sandstone in the distal delta front.The mouth bar is largely absent in this system.By analyzing the palaeogeomorphology,the palaeostructure background,sedimentary characteristics,sedimentary facies types and spatial distribution of sedimentary facies during the Chang 8 period,a distinctive depositional model of the Chang 8 shallow water fluvial-dominated delta was established,which primarily consists of straight multi-phase amalgamated distributary channels in the delta plain,net-like distributary channels frequently diverting and converging in the proximal delta front,sheet sandstones with dispersing contiguous lobate shapes in the distal delta front,and prodelta or shallow lake mudstones.

Intracontinental Collisional Orogeny During Late Permian-Middle Triassic in South China: Sedimentary Records of the Shiwandashan Basin

Sedimentary response to an orogenic process is important for determining whether South China had compressional or extensional orogeny during the period from the Late Permian to the Middle Triassic besides the tectonic and magmatologic evidence. An intracontinental collision event took place between the Yangtze and Cathaysia blocks in the Late Permian. Beginning at the Late Triassic, the tectonic movement was completely changed in nature and entered a post-collisional extensional orogenic and basin-making process. This paper presents sedimentological evidence from the Late Permian to the Middle Triassic in the Shiwandashan basin at the southwestern end of the junction zone between the Yangtze and Cathaysia blocks.

Basin Fluid Mineralization during Multistage Evolution of the Lanping Sedimentary Basin,Southwestern China

The Lanping sedimentary basin has experienced a five-stage evolution since the late Paleozoic： ocean-continent transformation （late Paleozoic to early mid-Triassic）; intracontinental rift basin （late mid-Triassic to early Jurassic）; down-warped basin （middle to late Jurassic）; foreland basin （Cretaceous）; and strike-slip basin （Cenozoic）. Three major genetic types of Ag-Cu polymetallic ore deposits, including the reworked hydrothermal sedimentary, sedimentary-hydrothermally reworked and hydrothermal vein types, are considered to be the products of basin fluid activity at specific sedimentary-tectonic evolutionary stages. Tectonic differences of the different evolutionary stages resulted in considerable discrepancy in the mechanisms of formation-transportation, migration direction and emplacement processes of the basin fluids, thus causing differences in mineralization styles as well as in genetic types of ore deposit.

Biodegradation and origin of oil sands in the Western Canada Sedimentary Basin

The oil sands deposits in the Western Canada Sedimentary Basin （WCSB） comprise of at least 85% of the total immobile bitumen in place in the world and are so concentrated as to be virtually the only such deposits that are economically recoverable for conversion to oil. The major deposits are in three geographic and geologic regions of Alberta： Athabasca, Cold Lake and Peace River. The bitumen reserves have oil gravities ranging from 8 to 12° API, and are hosted in the reservoirs of varying age, ranging from Devonian （Grosmont Formation） to Early Cretaceous （Mannville Group）. They were derived from light oils in the southern Alberta and migrated to the north and east for over 100 km during the Laramide Orogeny, which was responsible for the uplift of the Rocky Mountains. Biodegradation is the only process that transforms light oil into bitumen in such a dramatic way that overshadowed other alterations with minor contributions. The levels of biodegradation in the basin increasing from west （non-biodegraded） to east （extremely biodegraded） can be attributed to decreasing reservoir temperature, which played the primary role in controlling the biodegradation regime. Once the reservoir was heated to approximately 80℃, it was pasteurized and no biodegradation would further occur. However, reservoir temperature could not alone predict the variations of the oil composition and physical properties. Compositional gradients and a wide range ofbiodegradation degree at single reservoir column indicate that the water-leg size or the volume ratio of oil to water is one of the critical local controls for the vertical variations ofbiodegradation degree and oil physical properties. Late charging and mixing of the fresh and degraded oils ultimately dictate the final distribution of compositions and physical properties found in the heavy oil and oil sand fields. Oil geochemistry can reveal precisely the processes and levels that control these variations in a given field, which opens the possibility of model-driven prediction of oil properties and sweet spots in reservoirs.

Meso-Cenozoic Evolution of the Tanlu Fault and Formation of Sedimentary Basins

Abstract: There are a group of large and medium-scale Meso-Cenozoic petroliferous basins along both sides of the Tanlu fault or within the fault zone, e.g., the Songliao basin, the Bohai Bay basin and the Subei-Yellow Sea basin. As shown by studies of the structural types, sedimentary formations, volcanic activities, tectonic evolution as well as the time-space relationship between the Tanlu fault zone and the basins, the formation and distribution of the basins are controlled by the movement of the Tanlu fault. This paper presents an analysis of the tectono-geometric, kinematic and geodynamic features of the basins on the basis of integrated geological-geophysical data, and an exploration into the internal relations between the fault and the basins as well as the formation mechanism and geodynamic processes of the basins.

Cretaceous Sandbody Characters at Shallow-Water Lake Delta Front and the Sedimentary Dynamic Process Analysis in Songliao Basin,China

Based on the abundant information from drilling, cores, and logging, the influence of topography, size of rivers and lakes, climate changes and the lake level＇s fluctuation on the sandbodies at shallow-water delta front are systematically summarized and the sedimentary dynamic processes are analyzed. The interwell communication among the sandbodies and their planar distribution revealed from the hydrodynamic features of the development wells are integrated during the analysis. The fundamental requirements for the development of the shallow-water delta included flat topography and uniform subsiding rate. The delta plain was connected smoothly with the wide delta front and predelta, without the three-fold structure of topset, foreset, and bottomset as defined in the Gilbert Delta Model. Because of the weak fluvial effect and the lake energy is strong, the small and scattered shallow-water delta is destroyed by the scouring-backwashing, coastal current, and lake wave, resulting in the coastal sheet deposition. As the fluvial effect became stronger and the lake energy became weaker, the shape of the shallow-water deltas transferred from sheets to lumps and then branches.

Sedimentary environments controlled by tectonics and induced differential subsidence:A perspective in the Permian Liangshan and Qixia Formations,northwestern Sichuan Basin,China

Based on field observation,core description and well logging analysis,the tectonic-sedimentary framework of the Liangshan and Qixia Formations in the northwestern Sichuan Basin,China is deeply discussed.Two long-term sequence cycles were identified,denoted as LSC1 and LSC2,respectively.The sequence stratigraphic framework was established,suggesting the Liangshan Formation to be not isochronously deposited.Paleogeomorphy before deposition of LSC1 was reconstructed by the impression method.LSC1 was featured by thin,low-energy shoal deposits in the high topography,and thick inter-shoal sea and open sea deposits in the low topography.Meanwhile,paleogeomorphy before deposition of LSC2 was reconstructed using the residual thickness method,which was demonstrated to have primary high-energy,thick shoal deposits in the high topography,and thin inter-shoal and open sea deposits in the low topography.The results show that differential tectonic subsidence has already taken place during the Qixia Period,and thus the Dongwu Movement should occur earlier than previously expected.Meanwhile,pre-depositional paleogeomorphy has obvious controlling effects on the sequence stratigraphic filling and sedimentary facies distribution.Results of this study were expected to provide practical guidance to fine characterization of the sedimentary evolution process and prediction of high-quality reservoir distribution.

Sedimentary Micro-facies and Macro Heterogeneity of Reservoir Beds in the Third Member of the Qingshankou Formation,Qian'an Area,Songliao Basin

An analysis of drill cores and well logs shows that the main micro-facies of the third member sand bodies of the Qingshankou Formation in Qian＇an are subaqueous distributary channel facies, sheet sand facies and subaqueous fan facies （olistostrome）. Maps showing the distribution of these micro-facies together with inter-channel bay and prodelta mocro-facies are presented for different time-slices （lower, middle and upper parts of the Qingshankou Formation）. These maps reveal the instability and change of sediment transport in the Baokang sedimentary system during the depositional period. Sediment transport was from the west in the early stage, from the south in the middle stage and from the northwest in the late stage. Values of thickness, porosity and permeability of the sand bodies in the third member of the Qingshankou Formation show that they have low to medium porosity and low permeability, and are characterized by serious reservoir heterogeneity. The joints between micro-facies and subaqueous fan micro-facies are characterized by the highest heterogeneity, the sheet sand and distal sand bar subfacies come next, and the heterogeneity of the subaqueous distributary channel sand bodies is relatively weak.

Formation Conditions and Sedimentary Model of Over-Flooding Lake Deltas within Continental Lake Basins: An Example from the Paleogene in the Jiyang Subbasin, Bohai Bay Basin

A large quantity of drilling core, paleontology, geochemistry and geophysics data revealed several features of the Jiyang subbasin during the deposition of the Ekl-ES4x members： （1） the paleotopography of the gentle slope belt had an extremely low gradient; （2） the paleoclimate frequently alternated between dry and wet periods in a generally arid setting; （3） there was strong weathering around the periphery of the basin; （4） the lake was very shallow; （5） the lake level frequently rose and fell; and （6） the sedimentary environment of the gentle slope belt was an over- flooding lake. All of these factors provided favorable geological conditions for the development of an over-flooding lake delta. The lithologies of the continental over-flooding lake delta deposits are complex and diverse. The compositional maturity is moderate to low, and the grain size distribution curves and sedimentary structures indicate the presence of both gravity and traction currents. The sedimentary microfacies associations consist of a combination of ordered superposition of flood channels, distributary channels and sheet sands. The delta exhibits a weak foreset seismic reflection. The over-flooding lake delta deposits are laterally extensive. The sandstone content is high, and the individual sandstone beds are thin. The flood channel and distributary channel deposits exhibit evidence of bifurcation and lateral migration. The distribution of the sandbodies and the oxidation color of the mudstones provide evidence of cyclic deposition. The paleoclimate was the dominant factor controlling the development of the over-flooding lake delta. Due to the frequently alternating wet and dry paleoclimates, the over-flooding lake delta is characterized by the development of a broad upper plain and a lower delta plain. The upper delta plain is characterized by flood channel deposits, whereas the lower delta plain is represented by distributary channel deposits. The transition zone is characterized by the interaction of flood channels and distributary channels. Due to fault activity, the sandbodies of the over-flooding lake delta were juxtaposed against hydrocarbon source rocks, which was favorable for the development of lithologic reservoirs or structural-lithologic reservoirs. The lower delta plain deposits comprise the most favorable reservoirs.

Detailed sedimentary facies of a sandstone reservoir in the eastern zone of the Sulige gas field, Ordos Basin

Given sustaining exploration, the eastern zone of the Sulige gas field may soon become a key area of exploitation. In order to explore its genesis, types and distribution of the reservoir sandstones in the eastern zone of this gas field, we focused in our study on the provenance and detailed sedimentary facies of sandstone of the He8 （the eighth part of the Shihezi formation, Permian system） and Shanxil （the first part of the Shanxi formation, Permian system） members, based on core observations, analyses in petrography, granularity and logging. The results show that： 1） the sandstone provenance of Shanxil and He8 in the eastern zone of the Sulige gas field is from the north of the Ordos Basin, characterized by dual directions from the north and northeast. 2） The He8 and Shanxil members were deposited in a fluvial-delta sedimentary system. The He8 was mainly deposited in braided rivers, in- cluding braided channels, channel bars, levee and floodplain sub-environments, whereas the Shanxil Member was deposited in braided rivers and deltas, including braided channels, channel bars, floodplains, tributaries and inter-tributary sub-environments. 3） Sedimentary facies bands migrated in drastic fashion towards the basin from the Shanxil to the He8 Member. Base levels of sedi- mentation generally present a trend of small increases in-amplitude, large decreasing amplitudes and slow and gradual Increases. 4） The continuity of the reservoir sandbodies along the source direction is better than that perpendicular to the direction. Compared with Shanxil, both dimensions and continuity of the sandbodies in He8 are better from which we conclude that it is the most fa- vorable part of the reservoir.