Fixed-Dose Combination (FDC) Formulation of Quinine Sulphate-Doxycycline (Qidox) for Malaria Therapy

Background: One of the deadliest parasite infections is malaria. A combination of quinine sulphate and doxycycline is another therapeutic option for malaria that is resistant to chloroquine and is anticipated to be able to both combat the issue of anti-malarial medication resistance as well as the compliance to malaria therapy that is still raging in certain locations of Indonesia. Aim: This study will focus on evaluating the possibility of interaction between quinine sulphate and doxycycline followed by formulating the fixed-dose combination of both active pharmaceutical ingredients. Method: The study was designed as a laboratory experiment and applied some examinations. The examination from the organoleptic test of active pharmaceutical ingredients powder, crystallography analysis, and physical analysis of fixed-dose tablet including hardness, friability, and disintegration time testing. Result: The crystallography study reported there was no physical interaction found between quinine sulphate and doxycycline. The formula found excellent tablet printability with a composition of Quinine sulphate and doxycycline (Qidox). Conclusion: quinine sulphate with doxycycline can be combined into one tablet as Fixed-Dose Combination (FDC).

Recovery of iron from waste ferrous sulphate by co-precipitation and magnetic separation

Magnetite concentrate was recovered from ferrous sulphate by co-precipitation and magnetic separation. In co-precipitation process, the effects of reaction conditions on iron recovery were studied, and the optimal reaction parameters are proposed as follows： n（CaO）/n（Fe2＋） 1.4：1, reaction temperature 80 ℃, ferrous ion concentration 0.4 mol/L, and the final mole ratio of Fe3＋ to FJ＋ in the reaction solution 1.9-2.1. In magnetic separation process, the effects of milling time and magnetic induction intensity on iron recovery were investigated. Wet milling played an important part in breaking the encapsulated magnetic phases. The results showed that the mixed product was wet-milled for 20 min before magnetic separation, the grade and recovery rate of iron in magnetite concentrate were increased from 51.41% and 84.15% to 62.05% and 85.35%, respectively.

Corrosion behaviour of die-cast AZ91D magnesium alloys in sodium sulphate solutions with different pH values

The corrosion behaviours of die-cast AZ91D magnesium alloys were investigated in 0.1 mol/L sodium sulphate （Na 2 SO 4 ） solutions with different pH values. The corrosion rates, morphologies, and compositions of the corrosion products were studied by means of scanning electron microscopy （SEM）, Fourier transform infrared spectroscopy （FTIR）, and X-ray diffractometry （XRD）. The results indicate that the order of corrosion rates in Na 2 SO 4 solutions with various pH values is pH 2pH 4pH 7pH 9pH 12. The corrosion rates in acidic solutions are higher than those in alkaline solutions, and the corrosion products are mainly magnesium hydroxide （Mg（OH） 2 ） and hydrated sulphate pickeringite （MgAl 2 （SO 4 ） 4 ·22H 2 O）. The results also indicate that the solution pH can influence the corrosion rate and morphology of corrosion products. Chloride ions and sulphate ions have different pitting initiation time.

Pharmacokinetics of Controlled Release and Immediate Release Morphine Sulphate Tablets after a Single Dose and Multiple Doses in Chinese Volunteers

The pharmacokinetics of morphine sulphate was studied in 10 Chinese healthy volunteers after a single oral dose. Blood samples were collected before and after administration of controlled release tablets (CRMS, 30 mg) and immediate release tablets (IRMS, 20 mg). The plasma concentration of morphine was determined by GC MS. The pharmacokinetic parameters of controlled release tablets and immediate release tablets were calculated∶ C max was 19.38±3.80 and 21.27±6.21 ng/ml, t max was 2.36 ±0.37 h and 0.56±0.16 h, t 1/2β was 3.53±0.87 and 3.03±0.74 h, AUC was 145.15±17.65 and 93.08±16.65 ng/ml, respectively. The steady state plasma concentration of morphine sulphate in cancer patients after multiple doses was achieved, C max of CRMS and IRMS was 27.43±0.33 ng/ml and 22.68±0.16 ng/ml, C min of CRMS and IRMS was 19.45±1.44 ng/ml and 18.14±0.49 ng/ml, respectively.

Selective debenzylation of benzyl esters by silica-supported sodium hydrogen sulphate

A new debenzylation of benzyl esters by silica-supported sodium hydrogen sulfate is described. The debenzylation could be achieved selectively and efficiently in good to excellent yields without affecting sensitive functional groups such as nitro, unsaturated bonds, and ethyl ester.

Assessment of deterioration in RHA-concrete due to magnesium sulphate attack

The assessment of magnesium sulphate attack on concretes containing rice husk ash （RHA, 20wt% of the cementitious materials） with various average particle sizes was investigated. The total cementitious materials were 390 kg and the water-to-binder ratio （W/B） was 0.53 for all mixtures. Specimens were initially cured in water for 7 d and then immersed in the 3wt% magnesium sulphate solution for up to 111 d of exposure. The specimens were subjected to drying-wetting cycles to accelerate sulphate attack. In addition to the visual monitoring of the specimens, the concrete specimens were subsequently tested for compressive strength, dynamic modulus of elasticity, and length and mass changes. The results show that the specimens exposed to sulphate attack exhibit higher strength and dynamic modulus than those kept in water. The length change is negligible and can be attributed to the normal swelling of concrete. On the other hand, concretes suffers mass loss and surface spalling and softening; the fine RHA-concrete results in a better resistance. For the accelerated sulphate attack method used in this study, mass change and visual monitoring are recommended for assessing the deterioration degree and the effectiveness of supplementary cementitious materials to resist sulphate attack.

Attenuation of dextran sodium sulphate induced colitis in matrix metalloproteinase-9 deficient mice

AIM: To study whether matrix metalloproteinase-9 (MMP-9) is a key factor in epithelial damage in the dextran sodium sulphate (DSS) model of colitis in mice.METHODS: MMP-9-deficient and wild-type (wt) mice were given 5% DSS in drinking water for 5 d followed by recovery up to 7 d. On d 5 and 12 after induction of colitis, gelatinases, MMP-2 and MMP-9, were measured in homogenates of colonic tissue by zymography and Western blot, whereas tissue inhibitor of metalloproteinases (TIMPs) were measured by reverse zymography. The gelatinolytic activity was also determined in supernatants of polymorphonuclear leukocytes (PMN) isolated from mice blood. Moreover, intestinal epithelial cells were stimulated with TNF-α to study whether these cells were able to produce MMPs. Finally, colonic mucosal lesions were measured by microscopic examination. RESULTS: On d 5 of colitis, the activity of MMP-9 was increased in homogenates of colonic tissues (0.24 ± 0.1 vs 21.3 ± 6.4, P < 0.05) and PMN from peripheral blood in wt (0.5 ± 0.1 vs 10.4 ± 0.7, P < 0.05), but not in MMP-9-deficient animals. The MMP-9 activity was also up-regulated by TNF-α in epithelial intestinal cells (2.5 ± 0.5 vs 14.7 ± 3.0, P < 0.05). Although colitis also led to increase of TIMP-1 activity, the MMP-9/TIMP-1 balance remained elevated. Finally, in the MMP-9-deficient colitic mice both the extent and severity of intestinal epithelialinjury were significantly attenuated when compared with wt mice. CONCLUSION: We conclude that DSS induced colitis is markedly attenuated in animals lacking MMP-9. This suggests that intestinal injury induced by DSS is modu-lated by MMP-9 and that inhibition of this gelatinase may reduce inflammation.

Identification, Characterization and Evaluation of Crystal Forms of Quinine Sulphate

Crystal engineering concept has been utilized to modify the physico-chemical parameters of a naturally occurring alkaloid, quinine sulphate, by exploring its H-bond interactions to generate different forms. Quinine sulphate is found to exist in four different crystal forms. The Forms I and II depict endo/exo events suggesting conversion of metastable low melting forms to higher melting and stable form indicated by sharp melting endotherms. The low melting form IL is found to be monotropically related to high melting Form IH while low melting Form IIL is enantiotropically related to high melting Form IIH. The Form III and IV showed broad endotherms accompanied by mass loss in TGA prior to melting indicating the existence of solvatomorphism. The solvent molecules are tightly bound in the crystal lattice of the drug molecules which is shown by high values of the binding energies of the solvents in these two forms. The enthalpy of solution was found to be endothermic for all the forms which followed the order: Form O > Form II > Form III > Form I > Form IV and is further related to the lattice energy suggesting Form II to be least crystalline. The solubility for Form II was found to be highest with maximum release rate in dissolution studies. The effectiveness of new polymorphic forms was confirmed by performing in vivo antimalarial activity against P. berghei infection. The studies have shown an increase in antimalarial activity of Form IV concluding a successful development of new polymorphic form.

Anti-tumor necrosis factor α therapy associates to type 17 helper T lymphocytes immunological shift and significant microbial changes in dextran sodium sulphate colitis

BACKGROUND Anti-tumor necrosis factor α(TNFα) represents the best therapeutic option to induce mucosal healing and clinical remission in patients with moderate-severe ulcerative colitis. On the other side gut microbiota plays a crucial role in pathogenesis of ulcerative colitis but few information exists on how microbiota changes following anti-TNFα therapy and on microbiota role in mucosal healing.AIM To elucidate whether gut microbiota and immune system changes appear following anti TNFα therapy during dextran sulfate sodium(DSS) colitis.METHODS Eighty C57 BL/6 mice were divided into four groups: "No DSS", "No DSS + antiTNFα", "DSS" and "DSS + anti-TNFα". "DSS" and "DSS + anti-TNFα" were treated for 5 d with 3% DSS. At day 3, mice whithin "No DSS+anti-TNFα" and"DSS+anti-TNFα" group received 5 mg/kg of an anti-TNFα agent. Forty mice were sacrificed at day 5, forty at day 12, after one week of recovery post DSS. The severity of colitis was assessed by a clinical score(Disease Activity Index), colon length and histology. Bacteria such as Bacteroides, Clostridiaceae, Enterococcaceae and Fecalibacterium prausnitzii(F. prausnitzii) were evaluated by quantitative PCR.Type 1 helper T lymphocytes(Th1), type 17 helper T lymphocytes(Th17) and CD4+ regulatory T lymphocytes(Treg) distributions in the mesenteric lymph node(MLN) were studied by flow cytometry.RESULTS Bacteria associated with a healthy state(i.e., such as Bacteroides, Clostridiaceae and F. prausnitzii) decreased during colitis and increased in course of anti-TNFαtreatment. Conversely, microorganisms belonging to Enterococcaceae genera,which are linked to inflammatory processes, showed an opposite trend.Furthermore, in colitic mice treated with anti-TNFα microbial changes were associated with an initial increase(day 5 of the colitis) in Treg cells and a consequent decrease(day 12 post DSS) in Th1 and Th17 frequency cells. Healthy mice treated with anti-TNFα showed the same histological, microbial and immune features of untreated colitic mice. "No DSS + anti-TNFα" group showed a lymphomononuclear infiltrate both at 5 th and 12 th d at hematoxylin and eosin staining, an increase of in Th1 and Th17 frequency at day 12, an increase of Enterococcaceae at day 5, a decrease of Bacteroides and Clostridiaceae at day 12.CONCLUSION Anti-TNFα treatment in experimental model of colitis improves disease activity but it is associated to an increase in Th17 pathway together with gut microbiota alteration.

Effective photocatalytic conversion of formic acid using iron,copper and sulphate doped TiO_(2)

In this paper,the combined addition of copper or iron and sulphate ions onto TiO_(2) prepared by a simple sol-gel method is studied for formic acid photocatalytic conversion.A wide structural and morphological characterization of the different photocatalysts was performed by X-ray diffraction(XRD),N_(2)-physisorption for BET surface area measurements,scanning and transmission electronic microscopies(SEM and TEM),UV-Vis diffuse spectroscopy(DRS)and X-ray photoelectron spectroscopy(XPS),in order to correlate the physico-chemical properties of the materials to their photocatalytic efficiencies for formic acid oxidation.Results have shown important differences among the catalysts depending on the metal added.Sulphated TiO_(2)/Cu(1%Cu)was the best photocatalyst obtaining about 100% formic acid conversion in only 5 min.The appropriate physico-chemical features of this photocatalyst,given by the addition of combined copper and sulphate ions,explain its excellence in photocatalytic reaction.

Leaching kinetics of low-grade copper ore with high-alkality gangues in ammonia-ammonium sulphate solution

The leaching kinetics of low-grade copper ore with high-alkality gangues was studied in ammonia-ammonium sulphate solution.The main parameters,such as ammonia and ammonium sulphate concentrations,particle size,solid-to-liquid ratio and reaction temperature,were chosen in the experiments.The results show that the increase of temperature,concentrations of ammonia and ammonium sulphate is propitious to the leaching rate of copper ore.The leaching rate increases with the decrease of particle size and solid-to-liquid ratio.The leaching rate is controlled by the diffusion through the ash layer and the activation energy is determined to be 25.54 kJ/mol.A semi-empirical equation was proposed to describe the leaching kinetics.

Barium, Calcium and Sodium, Cyanide, Phosphate and Sulphate Contents of Groundwater in Some Ika Communities of Delta State, Nigeria

Barium, calcium, sodium, cyanide, phosphate and sulphate and contents of groundwater in Boji-Boji (BB) area and suburbs of Ika land, Delta State, Nigeria were studied. Groundwater is the predominant source of water for inhabitants of these communities without any form of treatment. 55 borehole water sites spread within these five sample sub-areas. The metal ions were analyzed using Solar Unicam flame Atomic Absorption Spectrophotometer. Sulphate, phosphate, and cyanide contents were determined by colorimetric method. Results indicate the presence of sodium, calcium, sulphate, and phosphate. However, barium and cyanide were below detection limit. Secondly, there was a relatively higher proportion of calcium and sulphate than sodium and phosphate in its aquifer. Thirdly, a mean ratio value of 0.018 and 0.158 was observed for the ratios of Na+/Ca2+ and ?respectively. Fourthly, sodium showed good correlation with all the other parameters. Finally, nearly all the studied parameters have concentrations below the maximum contaminant levels of the World Health Organization (WHO), invariably inferring that the water is wholesome with respect to the analytes. However, concern still remains from a health point of view on the sodium concentrations in many sample areas.

Extraction of aluminium as aluminium sulphate from thermal power plant fly ashes

Valuable metal extraction technology from thermal power plant fly ash is limited.In the present study,aluminium is extracted from fly ash as highly pure aluminium sulphate(>99.0%)by leaching with sulphuric acid,followed by pre-concentration and successive crystallization.Two types of fly ashes from different sources,i.e.,Talcher Thermal Power Station(TTPS)and Vedanta Aluminium Company Limited(VAL)were chosen for comparative study on the extraction of aluminium as aluminium sulphate.The product is characterized by powder X-ray diffraction(XRD),Fourier transform infrared spectroscopy(FTIR)and thermogravimetric analysis(TGA).Purity of aluminium sulphate was also investigated by inductively coupled plasma?optical emission spectrometry(ICP?OES).The extraction efficiency of aluminium depends on the varied solid-to-liquid ratio(fly ash:18mol/L H2SO4,g/mL)and particle size of fly ashes.Physico-chemical analysis indicates that the obtained product is Al2(SO4)3·18H2O,having low iron content(0.08%).

Molecular Dynamics Simulation on Scale Inhibition Mechanism of Polyepoxysuccinic Acid to Calcium Sulphate

Molecular dynamics simulation has been performed to simulate the interaction between PESA and the （001） face of anhydrite crystal CaSO4 at different temperatures with the presence of various number of H2O molecules. The results show that PESA can effectively prevent the growth of CaSO4 scale at 323-343 K. At the same temperature, the binding energy between PESA and the （001） face of CaSO4 for systems with various number of H2O has the order of E-bind（OH2O）〉Ebind（200-400H2O）〉E, bind（lOOH2O）. For the same system at different temperatures the binding energies are close and are mainly contributed from the Coulomb interaction, including ionic bonds. The bonds are formed between the calcium atoms of anhydrite scale crystal and the Hydrogen bonds are formed between the O oxygen atoms of the carboxyl group of PESA. atoms of the carboxyl group of PESA and the H atoms of H2O. van der Waals interaction is conducive to the stability of the system of PESA, H2O, and CaSO4. The radial distribution functions of O（carbonyl of PESA）-H（H2O）, O（CaSO4）-H（H2O）, and O（CaSO4）-H（PESA） imply that solvents have effects on the anti-scale performance of PESA to CaSO4.

Carboniferous Mixed Terrigenous Clastic, Carbonate and Sulphate Sediments in the Bachu Area, Xinjiang

The Carboniferous system in the Xiaohaizi area, Bachu County, Xinjiang Uygur Autonomous Region, composed of typical mixed terrigenous clastic, carbonate and sulphate sediments, was mainly deposited in the tidal flat and lagoon environments. The mixed sediments occur as the following eleven types: 1. limestone intercalated with siltstone; 2. interbeds of shale and limestone; 3. gypsolyte interbedded with limestone; 4. gypsolyte intercalated with siltstone; 5. gypsolyte interbedded with shale; 6. gypsolyte intercalated with siltstone, limestone and dolomite; 7. siltstone interbedded with gypsolyte and limestone; 8. terrigenous detritus scattered in carbonate matrix; 9. carbonate as cement in clastic rocks; 10. mixed sediments of carbonate and terrigenous mud; 11. mixed sediments of carbonate grains with terrigenous sand. Based on the analysis of the dynamic mechanism of mixed sediments, it is believed that these types of mixed sediments in the study area were controlled by climate, sea level change and sources of sediments.

Mechanical Properties of Lime-Fly Ash-Sulphate Aluminum Cement Stabilized Loess

Lime-fly ash stabilized loess has a poor early strength,which results in a later traffic opening time when it is used as road-base materials.Consideration of the significant early strength characteristics of sulphate aluminum cement(SAC),it is always added into the lime-fly ash mixtures to improve the early strength of stabilized loess.However,there is a scarcity of research on the mechanical behavior of lime-fly ash-SAC stabilized loess and there is a lack of quantitative evaluation of loess stabilized with binder materials.This research explored the effects of the amount of binder materials,curing time and porosity on the unconfined compressive strength(UCS),splitting tensile strength(STS),cohesion(c)and friction angle(φ)of lime-fly ash-SAC stabilized loess by a series of unconfined compressive tests(UCT)and splitting tensile tests(STT).The results indicate that an increase in curing time and a decrease in porosity lead to a continuous increase in the UCS and STS for lime-fly ash-SAC stabilized loess.The addition of SAC has a prominent enhancement in the early strength of lime-fly ash-SAC stabilized loess.When the curing time,porosity,and binder content were constant,the UCS and STS increase with increasing SAC content;For a stabilized loess with 30%binder content and 5%SAC content after 1 day of curing,the UCS was greater than 0.7 MPa,which meets the requirement of opening traffic,so lime-fly ash-SAC stabilized loess could be used as an excellent maintenance material for road-base;In accordance with the analysis of testing data,empirical relationships between the UCS and STS of lime-fly-SAC stabilized loess and key effect factors(binder materials content,curing time and porosity)were developed,which can provide references for reasonably selecting the amount of binder materials,compaction degree and curing period to meet the required strength of practical engineering.Finally,based on the Mohr-Coulomb theory and the above empirical relationships,a simpler method for calculating the c andφof stabilized loess was proposed,with which,the shear strength parameters can be determined only by UCT or STT.

Study on Removal of Trace Lead from Nickel Sulphate Solution by Ion-exchange Method

By comparing the adsorption capacity of several kinds of resins, D363 resin is regarded as the most suitable one for removing lead from nickel sulphate electrolyte. The effects of pH, temperature and contact time on exchange adsorption during removing trace lead from industrial nickel sulphate solution with D363 large pore weak alkali anion exchange resin are discussed. Optimum conditions of adsorption of lead from nickel electrolyte by D363 resin are at room temperature, pH 1 2, contact time 30 min.

Chemical and Electrochemical Characterization of Artifi cial Sulphate Patina on Bronze

Copper patinas are generally regarded as aesthetically pleasing and are supposed to protect copper against further corrosion. The preparation of artificial sulphate patina on bronzes has been realized by immersing the bronze into CuSO4 solution. The effect of immersion time on the formation of the patina has been investigated. The sulphate patina obtained with immersion time of 500 h in CuSO4 solution consists of fiat area and crystals. The flat area in the patina is mainly made of cuprite, whereas the crystals are mainly composed of brochantite. The electrochemical measurement of sulphate patina in simulated acid rain with pH 3.1 shows that the protective effectiveness of patina decreases with time and the dissolution of patina is the key factor leading to the degradation of patina. The investigation of the formation mechanism of sulphate patina shows that the cuprite layer forms on the surface of bronze in the initial patination. Then, crystal brochantite grows on the surface of cuprite by the oxidation of cuprite and the incorporation of CuSO4 solution.

Effects of L-lysine·H2SO4 product on the intestinal morphology and liver pathology using broiler model

Background: Lysine is used widely in livestock production due to the shortage of feed protein resources.Llysine·H2SO4 contains L-lysine sulphate as well as fermentation co-products which contain other amino acids and phosphorus.However,there are few articles about L-lysine·H2SO4 product regarding intestinal morphology and liver pathology of broiler chickens.In this article,we focus on the absorption and metabolism of L-lysine·H2SO4 revealed in the variation of intestinal morphology and liver pathology to determine the tolerance of chicks for L-lysine·H2SO4.Methods: To evaluate the tolerance of broilers for L-lysine·H2SO4,240 one day old broilers were allocated randomly to one of five dietary treatments which included corn-soybean diets containing 0,1%,4%,7% or 10% L-lysine·H2SO4(L-lysine content = 55%).Results: Supplementation of 1% L-lysine·H2SO4 in the diet had no negative effects.However,4%,7% or 10% Llysine·H2SO4 supplementation produced negative responses on broiler performance,carcass characteristics,blood biochemistry,and particularly on intestinal morphology and liver pathology compared with broilers fed the control diet.Conclusion: Our results show that supplementation with 1% L-lysine·H2SO4 had no negative effects on performance,carcass characteristics,blood biochemistry,intestinal morphology and liver pathology in broilers,but supplementation with 4%,7% or 10% L-lysine·H2SO4 produced a negative response,particularly with respect to intestinal morphology and liver pathology.

Adenosine or Magnesium Sulphate as Adjuvants for Pectoral Nerves Block in Modified Radical Mastectomy: A Randomized Controlled Trial

Introduction: Magnesium sulphate can prolong the effect of local anaesthetics. Adenosine has not been compared to other local anaesthetics adjuvants. In the present study we aimed to compare the effect of adding magnesium sulphate and adenosine to bupivacaine for pectoral nerves block. Patients and Methods: In this randomized controlled trial, 90 females scheduled for breast surgery were included. Patients were divided into three groups. Patients received general anaesthesia with pectoral nerves block. Group C, A, and M had bupivacaine only, bupivacaine + adenosine, and bupivaciane + magnesium sulphate respectively. Post-operative visual analogue score, block duration, post-operative morphine consumption, sedation score, and peri-operative haemodynamic changes were recorded. Results: Visual analog score was lower in Group M compared to other groups. Group A and M showed significant longer duration of the block. Group M showed significant longer duration of action than Group A (p = 0.034). The total peri-operative morphine used was higher in Group C (p 0.05). Conclusions: Local anaesthetic adjuvants such as adenosine or magnesium sulphate can improve pectoral nerves block characteristics. Magnesium sulphate has an advantage over adenosine by increasing the block duration.