High resolution X-ray spherically bent crystal spectrometer for laser-produced plasma diagnostics

A new high spectral resolution crystal spectrometer is designed to measure very low emissive X-ray spectra of laser-produced plasma in 0.5-0.9 nm range. A large open aperture （30 ×20 （mm）） mica （002） spherically bent crystal with curvature radius R = 380 mm is used as dispersive and focusing element. The imaging plate is employed to obtain high spectral resolution with effective area of 30 × 80 （mm）. The long designed path of the X-ray spectrometer beam is 980 mm from the source to the detector via the crystal. Experiment is carried out at a 20-J laser facility. X-ray spectra in an absolute intensity scale is obtained from Al laserproduced plasmas created by laser energy of 6.78 J. Samples of spectra obtained with spectral resolution of up to E/△E - 1500 are presented. The results clearly show that the device is good to diagnose laser high-density plasmas.

Online plasma diagnostics of a laser-produced plasma

In this study,we report a laser interferometry experiment for the online-diagnosing of a laserproduced plasma.The laser pulses generating the plasma are ultra-fast（30 femtoseconds）,ultraintense（tens of Terawatt） and are focused on a helium gas jet to generate relativistic electron beams via the laser wakefield acceleration（LWFA） mechanism.A probe laser beam（λ=800 nm） which is split-off the main beam is used to cross the plasma at the time of arrival of the main pulse,allowing online plasma density diagnostics.The interferometer setup is based on the No Marski method in which we used a Fresnel bi-prism where the probe beam interferes with itself after crossing the plasma medium.A high-dynamic range CCD camera is used to record the interference patterns.Based upon the Abel inversion technique,we obtained a 3D density distribution of the plasma density.

Storage time affects the level and diagnostic efficacy of plasma biomarkers for neurodegenerative diseases

Several promising plasma biomarker proteins,such as amyloid-β(Aβ),tau,neurofilament light chain,and glial fibrillary acidic protein,are widely used for the diagnosis of neurodegenerative diseases.However,little is known about the long-term stability of these biomarker proteins in plasma samples stored at-80°C.We aimed to explore how storage time would affect the diagnostic accuracy of these biomarkers using a large cohort.Plasma samples from 229 cognitively unimpaired individuals,encompassing healthy controls and those experiencing subjective cognitive decline,as well as 99 patients with cognitive impairment,comprising those with mild cognitive impairment and dementia,were acquired from the Sino Longitudinal Study on Cognitive Decline project.These samples were stored at-80°C for up to 6 years before being used in this study.Our results showed that plasma levels of Aβ42,Aβ40,neurofilament light chain,and glial fibrillary acidic protein were not significantly correlated with sample storage time.However,the level of total tau showed a negative correlation with sample storage time.Notably,in individuals without cognitive impairment,plasma levels of total protein and tau phosphorylated protein threonine 181(p-tau181)also showed a negative correlation with sample storage time.This was not observed in individuals with cognitive impairment.Consequently,we speculate that the diagnostic accuracy of plasma p-tau181 and the p-tau181 to total tau ratio may be influenced by sample storage time.Therefore,caution is advised when using these plasma biomarkers for the identification of neurodegenerative diseases,such as Alzheimer's disease.Furthermore,in cohort studies,it is important to consider the impact of storage time on the overall results.

Plasma diagnostics by optical emission spectroscopy on manganese ore in conjunction with XRD, XRF and SEM-EDS

Manganese(Mn) is an important industrial mineral.Information about the chemical and phase constitution along with the concentration of impurities presented in Mn ore is compulsory in assessing its suitability for different applications.We performed the qualitative and quantitative analysis of low-grade Mn ore(LGMO) using laser-induced breakdown spectroscopy(LIBS) in conjunction with x-ray diffraction(XRD), x-ray fluorescence(XRF) and scanning electron microscopy(SEM) coupled with energy dispersive x-ray electron spectroscopy(EDS).The optical emission spectra of the LGMO sample displayed the presence of Mn, Si, Ca, Fe, Al, Mg,V, Ti, Sr, Ni, Na, Ba and Li.The plasma parameters, electron temperature and number density were estimated using the Boltzmann plot and Stark broadening line profile methods and were found to be 7500 K±750 K and 8.18±0.8×1017 cm-3, respectively.Quantitative analysis was performed using the calibration-free LIBS(CF-LIBS) method and its outcome along with XRD, XRF and SEM-EDS data showed almost analogous elemental composition, while the LIBS method gave acceptably precise elemental analysis by detecting the low atomic number element Li besides V and Sr.The results obtained using LIBS for the LGMO exhibited its ability as a powerful analytical tool and XRF, XRD and SEM-EDS as complementary methods for the compositional analysis of complex low-grade mineral ore.

A synthetic diagnostics platform for microwave imaging diagnostics in tokamaks

Interpreting experimental diagnostics data in tokamaks,while considering non-ideal effects,is challenging due to the complexity of plasmas.To address this challenge,a general synthetic diagnostics(GSD)platform has been established that facilitates microwave imaging reflectometry and electron cyclotron emission imaging.This platform utilizes plasma profiles as input and incorporates the finite-difference time domain,ray tracing and the radiative transfer equation to calculate the propagation of plasma spontaneous radiation and the external electromagnetic field in plasmas.Benchmark tests for classical cases have been conducted to verify the accuracy of every core module in the GSD platform.Finally,2D imaging of a typical electron temperature distribution is reproduced by this platform and the results are consistent with the given real experimental data.This platform also has the potential to be extended to 3D electromagnetic field simulations and other microwave diagnostics such as cross-polarization scattering.

Enthalpy Probe Technique for Thermal Plasma Diagnostics

The measuring principle and experimental results of the enthalpy probe technique for thermal plasma diagnostics are presented. Its calibration and errors are discussed. Typical results are presented for the system operation in an Ar/H2(5 % H2) plasma arc jet under a reactor chamber pressure of 101.3 kPa. The plasma temperature and velocity profiles are measured. The center temperature and velocity are 6600 K and 850 m/s for plasma power 9 kW at axial location of 17 mm.

Development and Integration of a Data Acquisition System for SST-1 Phase-1 Plasma Diagnostics

Long pulse （of the order of 1000 s or more） SST-1 tokamak experiments demand a data acquisition system that is capable of acquiring data from various diagnostics channels without losing useful data （and hence physics information） while avoiding unnecessary generation of a large volume data. SST-1 Phase-1 tokamak operation has been envisaged with data acquisition of several essential diagnostics channels. These channels demand data acquisition at a sampling rate ranging from 1 kilo samples per second （KSPS） to 1 mega samples per second （MSPS）. Considering the technical characteristics and requirements of the diagnostics, a data acquisition system based on PXI and CAMAC has been developed for SST-1 plasma diagnostics. Both these data acquisition systems are scalable. Present data acquisition needs involving slow plasma diagnostics are catered by the PXI based data acquisition system. On the other hand, CAMAC data acquisition hardware meets all requirements of the SST-1 Phase-1 fast plasma diagnostics channels. A graphical user interface for both data acquisition systems （PXI and CAMAC） has been developed using LabVIEW application development software. The collected data on the local hard disk are directly streaming to the central server through a dedicated network for post-shot data analysis. This paper describes the development and integration of the data acquisition system for SST-1 Phase-1 plasma diagnostics. The integrated testing of the developed data acquisition system has been performed using SST-1 central control and diagnostics signal conditioning units. In the absence of plasma shots, the integrated testing of the data acquisition system for the initial diagnostics of SST-1 Phase-1 operation has been performed with simulated physical signals. The primary engineering objective of this integrated testing is to validate the performance of the developed data acquisition system under simulated conditions close to that of actual tokamak operation. The data acquisition is synchronized with a clock and trigger provided by the central timing system.

Laser-produced plasma helium-like titanium Kα x-ray source and its application to Rayleigh-Taylor instability study

Several experiments are performed on the ShenGuang-Ⅱ laser facility to investigate an x-ray source and test radiography concepts. X-ray lines emitted from laser-produced plasmas are the most practical means of generating these high intensity sources. By using a time-integrated space-resolved keV spectroscope and pinhole camera, potential helium-like titanium Kα x-ray backlighting （radiography） line source is studied as a function of laser wavelength, ratio of pre-pulse intensity to main pulse intensity, and laser intensity （from 7.25 to ～ 11.3 × 10^15 W/cm2）. One-dimensional radiography using a grid consisting of 5 #m Au wires on 16 μm period and the pinhole-assisted point projection is tested. The measurements show that the size of the helium-like titanium Ka source from a simple foil target is larger than 100 ~m, and relative x-ray line emission conversion efficiency ~x from the incident laser light energy to helium- like titanium K-shell spectrum increases significantly with pre-pulse intensity increasing, increases rapidly with laser wavelength decreasing, and increases moderately with main laser intensity increasing. It is also found that a gold gird foils can reach an imaging resolution better than 5-μm featured with high contrast. It is further demonstrated that the pinhole-assisted point projection at such a level will be a novel two-dimensional imaging diagnostic technique for inertial confinement fusion experiments.

Analysis of extreme ultraviolet spectral profiles of laser-produced Cr plasmas

Radiation from laser-produced plasmas was examined as a potential wavelength calibration source for spectrographs in the extreme ultraviolet(EUV) region.Specifically, the EUV emission of chromium(Cr) plasmas was acquired via spatiotemporally resolved emission spectroscopy.With the aid of Cowan and flexible atomic code(FAC) structure calculations,and a comparative analysis with the simulated spectra, emission peaks in the 6.5–15.0 nm range were identified as 3 p–4 d, 5 d and 3 p–4 s transition lines from Cr5+–Cr10+ions.A normalized Boltzmann distribution among the excited states and a steady-state collisional-radiative model were assumed for the spectral simulations, and used to estimate the electron temperature and density in the plasma.The results indicate that several relatively isolated emission lines of highly charged ions would be useful for EUV wavelength calibration.

High-resolution x-ray monochromatic imaging for laser plasma diagnostics based on toroidal crystal

Monochromatic x-ray imaging is an essential method for plasma diagnostics related to density information.Large-field high-resolution monochromatic imaging of a He-like iron(Fe XXV)Kαcharacteristic line(6.701 keV)for laser plasma diagnostics was achieved using a developed toroidal crystal x-ray imager.A high-index crystal orientation Ge(531)wafer with a Bragg angle of 75.37°and the toroidal substrate were selected to obtain sufficient diffraction efficiency and compensate for astigmatism under oblique incidence.A precise offline assembly method of the toroidal crystal imager based on energy substitution was proposed,and a spatial resolution of 3-7μm was obtained by toroidal crystal imaging of a 600 line-pairs/inch Au grid within an object field of view larger than 1.0 mm.The toroidal crystal x-ray imager has been successfully tested via side-on backlight imaging experiments of the sinusoidal modulation target and a 1000 line-pairs/inch Au grid with a linewidth of 5μm using an online alignment method based on dual positioning balls to indicate the target and backlighter.This paper describes the optical design,adjustment method,and experimental results of a toroidal crystal system in a laboratory and laser facility.

Spectral and ion emission features of laser-produced Sn and SnO2 plasmas

We have made a detailed comparison of the atomic and ionic debris, as well as the emission features of Sn and SnO2 plasmas under identical experimental conditions. Planar slabs of pure metal Sn and ceramic SnO2 are irradiated with 1.06 μm, 8 ns Nd：YAG laser pulses. Fast photography employing an intensified charge coupled device （ICCD）, optical emission spectroscopy （OES）, and optical time of flight emission spectroscopy are used as diagnostic tools. Our results show that the Sn plasma provides a higher extreme ultraviolet （EUV） conversion efficiency （CE） than the SnO2 plasma. However, the kinetic energies of Sn ions are relatively low compared with those of SnO2. OES studies show that the Sn plasma parameters （electron temperature and density） are lower compared to those of the SnO2 plasma. Furthermore, we also give the effects of the vacuum degree and the laser pulse energy on the plasma parameters.

A Fokker-Planck Code for Laser-Produced Plasmas

A Fokker-Planck code is developed based upon Epperlein＇s scheme to investigate laser-produced plasmas in relevance to inertial confinement fusion. The equations are integrated implicitly by time-splitting method. Three test problems are simulated to show the versatility of the code. The results are in good agreement with the existing simulations.

The plume diagnostics of 30 cm ion thruster with an advanced plasma diagnostics system

In order to achieve a better understanding of plume characteristics of LIPS-300 ion thruster,the beam current density,ion energy and electron number density of LIPS-300 ion thruster plume are studied with an Advanced Plasma Diagnostics System(APDS)which allows for simultaneous in situ measurements of various properties characterizing ion thruster,such as plasma density,plasma potential,plasma temperature and ion beam current densities,ion energy distribution and so on.The results show that the beam current density distribution has a double‘wing'shape.The high energy ions were found in small scan angle,while low energy ions were found in greater scan angle.Electron number density has a similar shape with the beam current density distribution.

Plasma characterization on carbon fiber cathode by spectroscopic diagnostics

This paper mainly investigates plasma characterization on carbon fiber cathodes with and without cesium iodide （CsI） coating powered by a - 300 ns, - 200 kV accelerating pulse. It was found that the CsI layers can not only improve the diode voltage, but also maintain a stable perveance. This indicates a slowly changed diode gap or a low cathode plasma expansion velocity. By spectroscopic diagnostics, in the vicinity of the cathode surface the average plasma density and temperature were found to be -3×10^14 cm^-3 and - 5 eV, respectively, for an electron current density of - 40 A/cm^2. Furthermore, there exists a multicomponent plasma expansion toward the anode. The plasma expansion velocity, corresponding to the carbon and hydrogen ions, is estimated to be - 1.5 cm/μs. Most notably, Cs spectroscopic line was obtained only at the distance - 0.5 mm from the cathode surface. Carbon and hydrogen ions are obtained up to the distance of 2.5 mm from the cathode surface. Cs ions almost remain at the vicinity of the cathode surface. These results show that the addition of CsI enables a slow cathode plasma expansion toward the anode, providing a positive prospect for developing long-pulse electron beam sources.

Population Diagnostics of a Hot NaBr Plasma by Detailed Simulation of Absorption Spectra

The experimental absorption spectra of a hot NaBr plasma are theoretically studied by using a detailed level accounting model. The sodium and bromine absorption spectra have been well reproduced respectively in the approach of local thermodynamic equilibrium, in which the populations between and within ions are obtained by solving the Saha-Boltzmann equation. The temperature of bromine however is found to be much lower than the one of sodium. Such discrepancy indicates that thermodynamic equilibrium is not reached between the sodium and bromine atoms during the measurement.

Progress in Plasma Diagnostics and Physics Experiment

The development of eight new diagnostic systems and the improvement of the laser Thomson scattering system contributed to the experimental campaign on HL-2A in 2006. Besides, the accuracy and flexibility of the molecular beam injection （MBI） system was improved greatly by using the special driver and controller, it is more convenient for studies such as particle transport. In the field of plasma physics experiment, the features of 3-D GAM zonal flows were further studied and some signs of low frequency zonal flows were observed. In the ECRH experiments, the effects of ECRH on sawtooth activities and m/n= 1/1 mode were studied under different plasma discharge conditions. The effect of MBI during ECRH on plasma behavior, such as non-local heat transport, was also studied.

Measurement and analysis of the extreme ultraviolet emission band of laser-produced antimony plasmas

The temporal evolution of extreme ultraviolet(EUV)emission spectra of laser-produced antimony(Sb)plasmas has been measured in the 7-16 nm wavelength region using spatio?temporally resolved lase-produced plasma spectroscopy technique.The spectral profiles involve an intense quasi-continuous band with superimposed intense characteristic radiation and are different with the increase of delay time.The spectral structures were also analyzed according to Hartree-Fock calculations with configuration interaction effects and contributed from 4d^4/;4d-4p,and 4d-5f unresolved transition arrays of Sb7*-Sb131.A steady-state collisionalradiative model was used to estimate the electron temperature and density range of Sb plasmas.This work would enrich the spectral data of highly-charged ions and provided a possible selection for developing EUV light sources.

Influence of heating effect in Thomson scattering diagnosis of laser-produced plasmas in air

A state diagnosis of laser-produced plasma in air generated by a 1064 nm pulse laser was investigated by the Thomson scattering(TS)method.The evolutions of the electron temperature and electron density were obtained as a function of the time delay which ranged from 300-3200 ns.The heating effect produced by the 532 nm probe beam with different energies on the air plasma at different interaction times was further studied using a time-resolved optical emission spectroscopy technique.The influence of the probe beam on the electron density was found to be negligible,whereas its influence on electron temperature is evident.In addition,the heating effect of the probe beam on the plasma strongly depends on the energy of the probe beam,and gradually weakens with increasing time delay.Our results are helpful for further understanding the TS method and its application in plasma diagnostics.

Analysis of extreme ultraviolet spectra of laser-produced Cd plasmas

In order to provide detailed information about Cd structure and gain more insight regarding ionization degrees and types of transition,as well as the understanding of the temporal evolution behavior of laser produced Cd plasmas,extreme ultraviolet spectra of laser-produced cadmium(Cd)plasmas have been measured in the 8.4-12 nm region using spatiotemporally resolved laser-produced plasma spectroscopy technique.Spectral features were analyzed by the Hartree-Fock(HF)method with relativistic correlations(HFR)using the Cowan code.The results showed that the 4p-5s resonance transition arrays from Cd^9+to Cd^13+merged to form intense lines in this spectral region.A number of new spectral features from Cd^9+and Cd^10+ions are reported in this study.Based on the assumption of a normalized Boltzmann distribution among the excited states associated with a steady-state collisional-radiative model,the plasma parameters were obtained by comparing the experimental and simulated spectra.As a result,we succeeded in reproducing the synthetic spectra for different time delays,which yielded good agreement with the experiments.The temporal evolution behaviors of electron temperature and electron density of plasma were also analyzed.

Time-resolved spectroscopy for 5s^('4)D_(7/2) state transitions undergoing electron–ion recombination in femtosecond laser-produced copper plasma

In the femtosecond laser-produced Cu-plasma, the transient transition dynamics that the excited state 5s4D7/2 via electron-ion recombination transfers to 4p4F9/20 （465.11 nm, Λ1 line） and 4p4D7/20 （529.25 nm, Λ2 line） states are investigated by using the time-resolved spectroscopy. The occupation number and relevant lifetime of the excited state 5s4D7/2, the temporal evolutions of spectral intensities for Λ1 line and Λ2 line emissions are demonstrated to be in direct proportion to the employed laser intensity, which reveals the transient features of transition dynamics clearly differing from that resulted in the traditional collision excitation. Furthermore, some unique characteristics for Λ1 and Λ2 transitions stemming from electron-ion recombination are examined in detail.