The titl angle measurement system based on the ADXL345 of three-axis acceleration sensor is introduced, and the composition and working principle of the system are described. The MSP430F149 microcontroller of ultra-lo...The titl angle measurement system based on the ADXL345 of three-axis acceleration sensor is introduced, and the composition and working principle of the system are described. The MSP430F149 microcontroller of ultra-low power and high performance is adopted. Firstly, the voltage value which is proportional to the acceleration value is output by ADXL345 when the system is powered. Secondly, the voltage value is converted into the corresponding digital signal by AD converter of the sensor. Thirdly, the digital signal is transformed into the titl angle according to the arithmetic processing of the MSP430F149. Finally, the corresponding angle is displayed on the liquid crystal display （LCD） screen. Experimental results show that the design has high sensitivity and response speed compared with the conventional methods. It is suitable for practical engineering application because of simple structure, low cost and low power consumption.展开更多
In this study,the multi-sensing system based on the tin oxide pH electrode for the ion-determination was presented. With the advantages of the real-time supervisory control apparatus,the measured values could be displ...In this study,the multi-sensing system based on the tin oxide pH electrode for the ion-determination was presented. With the advantages of the real-time supervisory control apparatus,the measured values could be displayed on the liquid crystal display (LCD) immediately.In this study,the basic sensor was the tin oxide pH electrode,which was fabricated by radio frequency (r.f.) sputtering system on the indium tin oxide (ITO)/glass substrate.Moreover,the major blocks of the system consist of the tin oxide electrode-based ion selective electrodes (ISEs),an analog front-ended readout circuit,a microcontroller with built-in analog to digital (A/D) converter.In addition,by the embedded system design,the measurement results can be transmitted to a portable system or computer through the Universal Serial Bus (USB) and Universal Asynchronous Receiver Transmitter (UART) interface immediately.According to the experimental results,the multi-sensing system has high performance and reliability for pH,K^+,and Na^+ detection.展开更多
文摘The titl angle measurement system based on the ADXL345 of three-axis acceleration sensor is introduced, and the composition and working principle of the system are described. The MSP430F149 microcontroller of ultra-low power and high performance is adopted. Firstly, the voltage value which is proportional to the acceleration value is output by ADXL345 when the system is powered. Secondly, the voltage value is converted into the corresponding digital signal by AD converter of the sensor. Thirdly, the digital signal is transformed into the titl angle according to the arithmetic processing of the MSP430F149. Finally, the corresponding angle is displayed on the liquid crystal display （LCD） screen. Experimental results show that the design has high sensitivity and response speed compared with the conventional methods. It is suitable for practical engineering application because of simple structure, low cost and low power consumption.
文摘In this study,the multi-sensing system based on the tin oxide pH electrode for the ion-determination was presented. With the advantages of the real-time supervisory control apparatus,the measured values could be displayed on the liquid crystal display (LCD) immediately.In this study,the basic sensor was the tin oxide pH electrode,which was fabricated by radio frequency (r.f.) sputtering system on the indium tin oxide (ITO)/glass substrate.Moreover,the major blocks of the system consist of the tin oxide electrode-based ion selective electrodes (ISEs),an analog front-ended readout circuit,a microcontroller with built-in analog to digital (A/D) converter.In addition,by the embedded system design,the measurement results can be transmitted to a portable system or computer through the Universal Serial Bus (USB) and Universal Asynchronous Receiver Transmitter (UART) interface immediately.According to the experimental results,the multi-sensing system has high performance and reliability for pH,K^+,and Na^+ detection.
