We theoretically investigate the propagation characteristics of spin waves in skyrmion-based magnonic crystals. It is found that the dispersion relation can be manipulated by strains through magneto-elastic coupling. ...We theoretically investigate the propagation characteristics of spin waves in skyrmion-based magnonic crystals. It is found that the dispersion relation can be manipulated by strains through magneto-elastic coupling. Especially, the allowed bands and forbidden bands in dispersion relations shift to higher frequency with strain changing from compressive to tensile,while shifting to lower frequency with strain changing from tensile to compressive. We also confirm that the spin wave with specific frequency can pass the magnonic crystal or be blocked by tuning the strains. The result provides an advanced platform for studying the tunable skyrmion-based spin wave devices.展开更多
We report on using synthetic silicon for a high-precision X-ray polarimeter comprising a polarizer and an analyzer,each based on a monolithic channel-cut crystal used at multiple Brewster reflections with a Bragg angl...We report on using synthetic silicon for a high-precision X-ray polarimeter comprising a polarizer and an analyzer,each based on a monolithic channel-cut crystal used at multiple Brewster reflections with a Bragg angle very close to 45°.Experiments were performed at the BL09B bending magnet beamline of the Shanghai Synchrotron Radiation Facility using a Si(800)crystal at an X-ray energy of 12.914 keV.A polarization purity of 8.4×10^(-9)was measured.This result is encouraging,as the measured polarization purity is the best-reported value for the bending magnet source.Notably,this is the firstly systematic study on the hard X-ray polarimeter in China,which is crucial for exploring new physics,such as verifying vacuum birefringence.展开更多
Quartz crystals are the most widely used material in resonant sensors,owing to their excellent piezoelectric and mechanical properties.With the development of portable and wearable devices,higher processing efficiency...Quartz crystals are the most widely used material in resonant sensors,owing to their excellent piezoelectric and mechanical properties.With the development of portable and wearable devices,higher processing efficiency and geometrical precision are required.Wet etching has been proven to be the most efficient etching method for large-scale production of quartz devices,and many wet etching approaches have been developed over the years.However,until now,there has been no systematic review of quartz crystal etching in liquid phase environments.Therefore,this article provides a comprehensive review of the development of wet etching processes and the achievements of the latest research in thisfield,covering conventional wet etching,additive etching,laser-induced backside wet etching,electrochemical etching,and electrochemical discharge machining.For each technique,a brief overview of its characteristics is provided,associated problems are described,and possible solutions are discussed.This review should provide an essential reference and guidance for the future development of processing strategies for the manufacture of quartz crystal devices.展开更多
Organic molecules that exhibit long persistent luminescence (LPL) are rapidly gaining attention for a variety of applications. In this study, organic molecules with simple structures were selected and organic long per...Organic molecules that exhibit long persistent luminescence (LPL) are rapidly gaining attention for a variety of applications. In this study, organic molecules with simple structures were selected and organic long persistent luminescence (OLPL) crystals were prepared. The crystal structure of the prepared OLPL crystal was elucidated and the guideline for the design of OLPL crystal was clarified. LPL was observed in OLPL crystals prepared with TMB as the guest molecule and 1,2-bis(diphenylphosphino)ethane as the host molecule. XRD measurements of the OLPL crystals suggest that the guest molecule is a solid solution substituted in the stable crystal structure of the host molecule in a lattice-shrinking direction.展开更多
Archimedean photonic crystal has become a research area of great interest due to its various unique properties. Here, we experimentally demonstrate the realization of reconfigurable(4, 6^(2))and(4, 8^(2)) Archimedean ...Archimedean photonic crystal has become a research area of great interest due to its various unique properties. Here, we experimentally demonstrate the realization of reconfigurable(4, 6^(2))and(4, 8^(2)) Archimedean plasma photonic crystals(APPCs) by use of dielectric barrier discharges in air. Dynamical control on both the macrostructures including the lattice symmetry and the crystal orientation, and the microstructures including the fine structures of scattering elements has been achieved. The formation mechanisms of APPCs are studied by time-resolved measurements together with numerical simulations. Large omnidirectional band gaps of APPCs have been obtained. The tunable topology of APPCs may offer new opportunities for fabricating multi-functional and highly-integrated microwave devices.展开更多
In this paper,we are concerned with a three-dimensional non-isothermal model for the compressible nematic liquid crystal flows in a periodic domain.Under some smallness and structural assumptions imposed on the time-p...In this paper,we are concerned with a three-dimensional non-isothermal model for the compressible nematic liquid crystal flows in a periodic domain.Under some smallness and structural assumptions imposed on the time-periodic force,we establish the existence of the time-periodic solutions to the system by using a regularized approximation scheme and the topological degree theory.We also prove a uniqueness result via energy estimates.展开更多
In this study,we explored the deformation mechanisms of Mg single crystals using a combination of scanning electron microscopy and electron backscattered diffraction in conjunction with a dedicated four-point bending ...In this study,we explored the deformation mechanisms of Mg single crystals using a combination of scanning electron microscopy and electron backscattered diffraction in conjunction with a dedicated four-point bending tester.We prepared two single-crystal samples,oriented along the<1120>and<1010>directions,to assess the mechanisms of deformation when the initial basal slip was suppressed.In the<1120>sample,the primary{1012}twin(T1)was confirmed along the<1120>direction of the sample on the compression side with an increase in bending stress.In the<1010>sample,T1 and the secondary twin(T2)were confirmed to be along the<1120>direction,with an orientation of±60°with respect to the bending stress direction,and their direction matched with(0001)in T1 and T2.This result implies that crystallographically,the basal slip occurs readily.In addition,the<1010>sample showed the double twin in T1 on the compression side and the tertiary twin along the<1010>direction on the tension side.These results demonstrated that the maximum bending stress and displacement changed significantly under the bend loading because the deformation mechanisms were different for these single crystals.Therefore,the correlation between bending behavior and twin orientation was determined,which would be helpful for optimizing the bending properties of Mg-based materials.展开更多
We present a stable valley photonic crystal(VPC)unit cell with C_(3v)symmetric quasi-ring-shaped dielectric columns and realize its topological phase transition by breaking mirror symmetry.Based on this unit cell stru...We present a stable valley photonic crystal(VPC)unit cell with C_(3v)symmetric quasi-ring-shaped dielectric columns and realize its topological phase transition by breaking mirror symmetry.Based on this unit cell structure,topological edge states(TESs)and topological corner states(TCSs)are realized.We obtain a new type of wave transmission mode based on photonic crystal zipper-like boundaries and apply it to a beam splitter assembled from rectangular photonic crystals(PCs).The constructed beam splitter structure is compact and possesses frequency separation functions.In addition,we construct a box-shaped triangular PC structures with zipper-like boundaries and discover phenomena of TCSs in the corners,comparing its corner states with those formed by other boundaries.Based on this,we explore the regularities of the electric field patterns of TESs and TCSs,explain the connection between the characteristic frequencies and locality of TCSs,which helps better control photons and ensures low power consumption of the system.展开更多
A new method based on phononic crystals is presented to detect the concentration of heavy water(D_(2)O)in an H_(2)O-D_(2)O mixture.Results have been obtained and analyzed in the concentration range of 0%-10%and 90%-10...A new method based on phononic crystals is presented to detect the concentration of heavy water(D_(2)O)in an H_(2)O-D_(2)O mixture.Results have been obtained and analyzed in the concentration range of 0%-10%and 90%-100%D_(2)O.A proposed structure of tungsten scatterers in an aluminum host is studied.In order to detect the target material,a cavity region is considered as a sound wave resonator in which the target material with different concentrations of D_(2)O is embedded.By changing the concentration of D_(2)O in the H_(2)O-D_(2)O mixture,the resonance frequency undergoes a frequency shift.Each 1%change in D_(2)O concentration in the H_(2)O-D_(2)O mixture causes a frequency change of about 120 Hz.The finite element method is used as the numerical method to calculate and analyze the natural frequencies and transmission spectra of the proposed sensor.The performance evaluation index shows a high Q factor up to 1475758 and a high sensitivity up to 13075,which are acceptable values for sensing purposes.The other figures of merit related to the detection performance also indicate high-quality performance of the designed sensor.展开更多
The hydrodynamics of active liquid crystal models has attracted much attention in recent years due to many applications of these models.In this paper,we study the weak-strong uniqueness for the Leray-Hopf type weak so...The hydrodynamics of active liquid crystal models has attracted much attention in recent years due to many applications of these models.In this paper,we study the weak-strong uniqueness for the Leray-Hopf type weak solutions to the incompressible active liquid crystals in R^(3).Our results yield that if there exists a strong solution,then it is unique among the Leray-Hopf type weak solutions associated with the same initial data.展开更多
To understand the anisotropy dependence of the damage evolution and material removal during the machining process of MgF_(2) single crystals,nanoscratch tests of MgF_(2) single crystals with different crystal planes a...To understand the anisotropy dependence of the damage evolution and material removal during the machining process of MgF_(2) single crystals,nanoscratch tests of MgF_(2) single crystals with different crystal planes and directions were systematically performed,and surface morphologies of the scratched grooves under different conditions were analyzed.The experimental results indicated that anisotropy considerably affected the damage evolution in the machining process of MgF_(2) single crystals.A stress field model induced by the scratch was developed by considering the anisotropy,which indicated that during the loading process,median cracks induced by the tensile stress initiated and propagated at the front of the indenter.Lateral cracks induced by tensile stress initiated and propagated on the subsurface during the unloading process.In addition,surface radial cracks induced by the tensile stress were easily generated during the unloading process.The stress change led to the deflection of the propagation direction of lateral cracks.Therefore,the lateral cracks propagated to the workpiece surface,resulting in brittle removal in the form of chunk chips.The plastic deformation parameter indicated that the more the slip systems were activated,the more easily the plastic deformation occurred.The cleavage fracture parameter indicated that the cracks propagated along the activated cleavage planes,and the brittle chunk removal was owing to the subsurface cleavage cracks propagating to the crystal surface.Under the same processing parameters,the scratch of the(001)crystal plane along the[100]crystal-orientation was found to be the most conducive to achieving plastic machining of MgF_(2) single crystals.The theoretical results agreed well with the experimental results,which will not only enhance the understanding of the anisotropy dependence of the damage evolution and removal process during the machining of MgF_(2) crystals,but also provide a theoretical foundation for achieving the high-efficiency and low-damage processing of anisotropic single crystals.展开更多
Low-dimensional halide perovskites have become the most promising candidates for X-ray imaging,yet the issues of the poor chemical stability of hybrid halide perovskite,the high poisonousness of lead halides and the r...Low-dimensional halide perovskites have become the most promising candidates for X-ray imaging,yet the issues of the poor chemical stability of hybrid halide perovskite,the high poisonousness of lead halides and the relatively low detectivity of the lead-free halide perovskites which seriously restrain its commercialization.Here,we developed a solution inverse temperature crystal growth(ITCG)method to bring-up high quality Cs_(3)Cu_(2)I_(5)crystals with large size of centimeter order,in which the oleic acid(OA)is introduced as an antioxidative ligand to inhibit the oxidation of cuprous ions effieiently,as well as to decelerate the crystallization rate remarkalby.Based on these fine crystals,the vapor deposition technique is empolyed to prepare high quality Cs_(3)Cu_(2)I_(5)films for efficient X-ray imaging.Smooth surface morphology,high light yields and short decay time endow the Cs_(3)Cu_(2)I_(5)films with strong radioluminescence,high resolution(12 lp/mm),low detection limits(53 nGyair/s)and desirable stability.Subsequently,the Cs_(3)Cu_(2)I_(5)films have been applied to the practical radiography which exhibit superior X-ray imaging performance.Our work provides a paradigm to fabricate nonpoisonous and chemically stable inorganic halide perovskite for X-ray imaging.展开更多
Using the Lindemann criterion,we analyzed the quantum and thermal melting of electronic/excitonic crystals recently discovered in two-dimensional(2D)semiconductor moirépatterns.We show that the finite 2D screenin...Using the Lindemann criterion,we analyzed the quantum and thermal melting of electronic/excitonic crystals recently discovered in two-dimensional(2D)semiconductor moirépatterns.We show that the finite 2D screening of the atomically thin material can suppress(enhance)the inter-site Coulomb(dipolar)interaction strength,thus inhibits(facilitates)the formation of the electronic(excitonic)crystal.Meanwhile,a strong enough moiréconfinement is found to be essential for realizing the crystal phase with a wavelength near 10 nm or shorter.From the calculated Lindemann ratio which quantifies the fluctuation of the site displacement,we estimate that the crystal will melt into a liquid above a critical temperature ranging from several tens Kelvin to above 100 K(depending on the system parameters).展开更多
In this article Florian Puchtler at affiliation‘University of Bayreuth’,Josef Breu at affiliation‘University of Bayreuth’,and Ziliang Wu at affiliation‘Zhejiang University’was missing from the author Min Cao,Sen...In this article Florian Puchtler at affiliation‘University of Bayreuth’,Josef Breu at affiliation‘University of Bayreuth’,and Ziliang Wu at affiliation‘Zhejiang University’was missing from the author Min Cao,Senping Liu,Qingli Zhu,Ya Wang,Jingyu Ma,Zeshen Li,Dan Chang,Enhui Zhu,Xin Ming,Florian Puchtler,Josef Breu,Ziliang Wu,Yingjun Liu,Yanqiu Jiang,Zhen Xu,Chao Gao list.展开更多
Kagome materials have been studied intensively in condensed matter physics.With rich properties,various Kagome materials emerge during this process.Here,we grew single crystals of Y_(0.5)Fe_(3)Sn_(3)and confirmed an Y...Kagome materials have been studied intensively in condensed matter physics.With rich properties,various Kagome materials emerge during this process.Here,we grew single crystals of Y_(0.5)Fe_(3)Sn_(3)and confirmed an YCo_(6)Ge_(6)-type Kagome-lattice structure by detailed crystal structure characterizations.This compound bears an antiferromagnetic ordering at T_(N)= 551 K,and shows a weak ferromagnetism at low temperatures,where an anomalous Hall effect was observed,suggesting the non-zero Berry curvature.With the unstable antiferromagnetic ground state,our systematic investigations make Y_(0.5)Fe_(3)Sn_(3)a potential Kagome compound for Kagome or topological physics.展开更多
The recent report of pressure-induced structural transition and signature of superconductivity with T_(c)≈80 K above 14 GPa in La_(3)Ni_(2)O_(7)crystals has garnered considerable attention.To further elaborate this d...The recent report of pressure-induced structural transition and signature of superconductivity with T_(c)≈80 K above 14 GPa in La_(3)Ni_(2)O_(7)crystals has garnered considerable attention.To further elaborate this discovery,we carried out comprehensive resistance measurements on La_(3)Ni_(2)O_(7)crystals grown in an optical-image floating zone furnace under oxygen pressure(15 bar)using a diamond anvil cell(DAC)and cubic anvil cell(CAC),which employ a solid(KBr)and liquid(glycerol)pressure-transmitting medium,respectively.Sample 1 measured in the DAC exhibits a semiconducting-like behavior with large resistance at low pressures and gradually becomes metallic upon compression.At pressures P 13.7 GPa we observed the appearance of a resistance drop of as much as~50%around 70 K,which evolves into a kink-like anomaly at pressures above 40 GPa and shifts to lower temperatures gradually with increasing magnetic field.These observations are consistent with the recent report mentioned above.On the other hand,sample 2 measured in the CAC retains metallic behavior in the investigated pressure range up to 15 GPa.The hump-like anomaly in resistance around~130 K at ambient pressure disappears at P≥2 GPa.In the pressure range of 11–15 GPa we observed the gradual development of a shoulder-like anomaly in resistance at low temperatures,which evolves into a pronounced drop of resistance of 98%below 62 K at 15 GPa,reaching a temperature-independent resistance of 20μΩbelow 20 K.Similarly,this resistance anomaly can be progressively shifted to lower temperatures by applying external magnetic fields,resembling a typical superconducting transition.Measurements on sample 3 in the CAC reproduce the resistance drop at pressures above 10 GPa and realize zero resistance below 10 K at 15 GPa even though an unusual semiconducting-like behavior is retained in the normal state.Based on these results,we constructed a dome-shaped superconducting phase diagram and discuss some issues regarding the sample-dependent behaviors on pressure-induced hightemperature superconductivity in the La_(3)Ni_(2)O_(7)crystals.展开更多
Mn_(3)Sn_(2)has been proposed as an ideal material for magnetic refrigeration.It undergoes two successive ferromagnetic transitions(T_(C1)=262 K and T_(C2)=227 K)and one antiferromagnetic transition(TN=192 K).Herein w...Mn_(3)Sn_(2)has been proposed as an ideal material for magnetic refrigeration.It undergoes two successive ferromagnetic transitions(T_(C1)=262 K and T_(C2)=227 K)and one antiferromagnetic transition(TN=192 K).Herein we report,for the first time,the preparation of single crystals of Mn_(3)Sn_(2)from Bi flux.The resultant anisotropic magnetic properties and magnetocaloric effect are investigated along the three principal crystallographic directions of the crystal.Significant anisotropy of magnetic susceptibility and multiple field-induced metamagnetic transitions were found at low fields,whereas the magnetocaloric effect was found to be almost isotropic and larger than that of the polycrystalline one.The maximum magnetic entropy change amounts to-ΔSM=4.01 J·kg^(-1)·K^(-1)near T_(C1)under a magnetic field change of μ_(0)ΔH=5 T along the c-axis,with the corresponding refrigerant capacity of 1750 mJ·cm^(-3).Combined with a much wider cooling temperature span(~80 K),our results demonstrate Mn_(3)Sn_(2)single crystal to be an attractive candidate working material for active magnetic refrigeration at low temperatures.展开更多
Photonic crystals are periodic structural materials that have an impact on the propagation properties of photons.Due to their excellent optical,electrical and magnetic properties,their advantages and potential for app...Photonic crystals are periodic structural materials that have an impact on the propagation properties of photons.Due to their excellent optical,electrical and magnetic properties,their advantages and potential for applications in the above areas are gradually emerging.Therefore,an increasing number of researchers have focused on photonic crystals.In this paper,the characteristics of biological photonic crystal structures,such as those found in butterfly wings,sea mouse bristles,peacock feathers,melon jellyfish epidermal cells,and weevil exoskeletons,are described.The preparation methods of photonic crystals are systematically summarized(including the template method,self-assembly technology,electron beam evaporation coating technology,chemical vapor deposition technology,femtosecond laser two-photon technology,spin coating technology,and a variety of technology mixing),and the characteristics,advantages,and disadvantages of the different methods are compared.Furthermore,the development of photonic crystals in the field of sensors,solar cells,filters,and infrared stealth is discussed,demonstrateing the great development potential of photonic crystals.It is concluded that the realization of photonic crystals with high precision,high sensitivity,angle independence,and large-area uniform preparation is a key problem requiring urgent solution.Moreover,photonic crystals have potential development prospects in the fields of equipment stealth,new concept weapons,production,an daily life.展开更多
We present a novel approach for the prediction of crystal material properties that is distinct from the computationally complex and expensive density functional theory(DFT)-based calculations.Instead,we utilize an att...We present a novel approach for the prediction of crystal material properties that is distinct from the computationally complex and expensive density functional theory(DFT)-based calculations.Instead,we utilize an attention-based graph neural network that yields high-accuracy predictions.Our approach employs two attention mechanisms that allow for message passing on the crystal graphs,which in turn enable the model to selectively attend to pertinent atoms and their local environments,thereby improving performance.We conduct comprehensive experiments to validate our approach,which demonstrates that our method surpasses existing methods in terms of predictive accuracy.Our results suggest that deep learning,particularly attention-based networks,holds significant promise for predicting crystal material properties,with implications for material discovery and the refined intelligent systems.展开更多
文摘We theoretically investigate the propagation characteristics of spin waves in skyrmion-based magnonic crystals. It is found that the dispersion relation can be manipulated by strains through magneto-elastic coupling. Especially, the allowed bands and forbidden bands in dispersion relations shift to higher frequency with strain changing from compressive to tensile,while shifting to lower frequency with strain changing from tensile to compressive. We also confirm that the spin wave with specific frequency can pass the magnonic crystal or be blocked by tuning the strains. The result provides an advanced platform for studying the tunable skyrmion-based spin wave devices.
基金supported by the Shanghai Municipal Science and Technology Major Project(No.2017SHZDZX02)the National Natural Science Foundation of China(No.12205360)the Youth Innovation Promotion Association of the Chinese Academy of Sciences(No.2018297)。
文摘We report on using synthetic silicon for a high-precision X-ray polarimeter comprising a polarizer and an analyzer,each based on a monolithic channel-cut crystal used at multiple Brewster reflections with a Bragg angle very close to 45°.Experiments were performed at the BL09B bending magnet beamline of the Shanghai Synchrotron Radiation Facility using a Si(800)crystal at an X-ray energy of 12.914 keV.A polarization purity of 8.4×10^(-9)was measured.This result is encouraging,as the measured polarization purity is the best-reported value for the bending magnet source.Notably,this is the firstly systematic study on the hard X-ray polarimeter in China,which is crucial for exploring new physics,such as verifying vacuum birefringence.
基金supported by the Natural Science Foundation of China (Grant No.12234005)the major research and development program of Jiangsu Province (Grant Nos.BE2021007-2 and BK20222007)。
文摘Quartz crystals are the most widely used material in resonant sensors,owing to their excellent piezoelectric and mechanical properties.With the development of portable and wearable devices,higher processing efficiency and geometrical precision are required.Wet etching has been proven to be the most efficient etching method for large-scale production of quartz devices,and many wet etching approaches have been developed over the years.However,until now,there has been no systematic review of quartz crystal etching in liquid phase environments.Therefore,this article provides a comprehensive review of the development of wet etching processes and the achievements of the latest research in thisfield,covering conventional wet etching,additive etching,laser-induced backside wet etching,electrochemical etching,and electrochemical discharge machining.For each technique,a brief overview of its characteristics is provided,associated problems are described,and possible solutions are discussed.This review should provide an essential reference and guidance for the future development of processing strategies for the manufacture of quartz crystal devices.
文摘Organic molecules that exhibit long persistent luminescence (LPL) are rapidly gaining attention for a variety of applications. In this study, organic molecules with simple structures were selected and organic long persistent luminescence (OLPL) crystals were prepared. The crystal structure of the prepared OLPL crystal was elucidated and the guideline for the design of OLPL crystal was clarified. LPL was observed in OLPL crystals prepared with TMB as the guest molecule and 1,2-bis(diphenylphosphino)ethane as the host molecule. XRD measurements of the OLPL crystals suggest that the guest molecule is a solid solution substituted in the stable crystal structure of the host molecule in a lattice-shrinking direction.
基金supported by National Natural Science Foundation of China(Nos.12275065 and 11975089)Natural Science Foundation of Hebei Province(Nos.A2021201010 and A2021201003)+4 种基金Interdisciplinary Research Program of Natural Science of Hebei University(No.DXK202108)Hebei Provincial Central Government Guiding Local Science and Technology Development Funds(No.236Z1501G)Scientific Research and Innovation Team Foundation of Hebei University(No.IT2023B03)The Excellent Youth Research Innovation Team of Hebei University(No.QNTD202402)Regional Key Projects of National Natural Science Foundation of China(No.U23A20678).
文摘Archimedean photonic crystal has become a research area of great interest due to its various unique properties. Here, we experimentally demonstrate the realization of reconfigurable(4, 6^(2))and(4, 8^(2)) Archimedean plasma photonic crystals(APPCs) by use of dielectric barrier discharges in air. Dynamical control on both the macrostructures including the lattice symmetry and the crystal orientation, and the microstructures including the fine structures of scattering elements has been achieved. The formation mechanisms of APPCs are studied by time-resolved measurements together with numerical simulations. Large omnidirectional band gaps of APPCs have been obtained. The tunable topology of APPCs may offer new opportunities for fabricating multi-functional and highly-integrated microwave devices.
基金partially supported by the Science and Technology Research Program of Chongqing Municipal Education Commission(KJQN202100523,KJQN202000536)the National Natural Science Foundation of China(12001074)+3 种基金the Natural Science Foundation of Chongqing(cstc2020jcyj-msxmX0606)supported by the National Natural Science Foundation of Chongqing(CSTB2023NSCQ-MSX0278)the Science and Technology Research Program of Chongqing Municipal Education Commission(KJZD-K202100503)the Research Project of Chongqing Education Commission(CXQT21014)。
文摘In this paper,we are concerned with a three-dimensional non-isothermal model for the compressible nematic liquid crystal flows in a periodic domain.Under some smallness and structural assumptions imposed on the time-periodic force,we establish the existence of the time-periodic solutions to the system by using a regularized approximation scheme and the topological degree theory.We also prove a uniqueness result via energy estimates.
基金supported by The AMADA FOUNDATION[grant number AF-2022030-B3]JSPS KAKENHI[grant numbers JP16K05961 and JP19K04065]。
文摘In this study,we explored the deformation mechanisms of Mg single crystals using a combination of scanning electron microscopy and electron backscattered diffraction in conjunction with a dedicated four-point bending tester.We prepared two single-crystal samples,oriented along the<1120>and<1010>directions,to assess the mechanisms of deformation when the initial basal slip was suppressed.In the<1120>sample,the primary{1012}twin(T1)was confirmed along the<1120>direction of the sample on the compression side with an increase in bending stress.In the<1010>sample,T1 and the secondary twin(T2)were confirmed to be along the<1120>direction,with an orientation of±60°with respect to the bending stress direction,and their direction matched with(0001)in T1 and T2.This result implies that crystallographically,the basal slip occurs readily.In addition,the<1010>sample showed the double twin in T1 on the compression side and the tertiary twin along the<1010>direction on the tension side.These results demonstrated that the maximum bending stress and displacement changed significantly under the bend loading because the deformation mechanisms were different for these single crystals.Therefore,the correlation between bending behavior and twin orientation was determined,which would be helpful for optimizing the bending properties of Mg-based materials.
基金Project supported by the Suzhou Basic Research Project (Grant No.SJC2023003)Suzhou City University National Project Pre-research Project (Grant No.2023SGY014)。
文摘We present a stable valley photonic crystal(VPC)unit cell with C_(3v)symmetric quasi-ring-shaped dielectric columns and realize its topological phase transition by breaking mirror symmetry.Based on this unit cell structure,topological edge states(TESs)and topological corner states(TCSs)are realized.We obtain a new type of wave transmission mode based on photonic crystal zipper-like boundaries and apply it to a beam splitter assembled from rectangular photonic crystals(PCs).The constructed beam splitter structure is compact and possesses frequency separation functions.In addition,we construct a box-shaped triangular PC structures with zipper-like boundaries and discover phenomena of TCSs in the corners,comparing its corner states with those formed by other boundaries.Based on this,we explore the regularities of the electric field patterns of TESs and TCSs,explain the connection between the characteristic frequencies and locality of TCSs,which helps better control photons and ensures low power consumption of the system.
文摘A new method based on phononic crystals is presented to detect the concentration of heavy water(D_(2)O)in an H_(2)O-D_(2)O mixture.Results have been obtained and analyzed in the concentration range of 0%-10%and 90%-100%D_(2)O.A proposed structure of tungsten scatterers in an aluminum host is studied.In order to detect the target material,a cavity region is considered as a sound wave resonator in which the target material with different concentrations of D_(2)O is embedded.By changing the concentration of D_(2)O in the H_(2)O-D_(2)O mixture,the resonance frequency undergoes a frequency shift.Each 1%change in D_(2)O concentration in the H_(2)O-D_(2)O mixture causes a frequency change of about 120 Hz.The finite element method is used as the numerical method to calculate and analyze the natural frequencies and transmission spectra of the proposed sensor.The performance evaluation index shows a high Q factor up to 1475758 and a high sensitivity up to 13075,which are acceptable values for sensing purposes.The other figures of merit related to the detection performance also indicate high-quality performance of the designed sensor.
基金partially supported by NSFC(11831003,12031012)the Institute of Modern Analysis-A Frontier Research Center of Shanghai。
文摘The hydrodynamics of active liquid crystal models has attracted much attention in recent years due to many applications of these models.In this paper,we study the weak-strong uniqueness for the Leray-Hopf type weak solutions to the incompressible active liquid crystals in R^(3).Our results yield that if there exists a strong solution,then it is unique among the Leray-Hopf type weak solutions associated with the same initial data.
基金supported by the National Natural Science Foundation of China (52005134&51975154)China Postdoctoral Science Foundation (2022T150163, 2020M670901)+4 种基金Self-Planned Task (No. SKLRS202214B) of State Key Laboratory of Robotics and System (HIT)Heilongjiang Postdoctoral Fund (LBH-Z20016)Shenzhen Science and Technology Program (GJHZ20210705142804012)Fundamental Research Funds for the Central Universities(FRFCU5710051122)Open Fund of ZJUT Xinchang Research Institute
文摘To understand the anisotropy dependence of the damage evolution and material removal during the machining process of MgF_(2) single crystals,nanoscratch tests of MgF_(2) single crystals with different crystal planes and directions were systematically performed,and surface morphologies of the scratched grooves under different conditions were analyzed.The experimental results indicated that anisotropy considerably affected the damage evolution in the machining process of MgF_(2) single crystals.A stress field model induced by the scratch was developed by considering the anisotropy,which indicated that during the loading process,median cracks induced by the tensile stress initiated and propagated at the front of the indenter.Lateral cracks induced by tensile stress initiated and propagated on the subsurface during the unloading process.In addition,surface radial cracks induced by the tensile stress were easily generated during the unloading process.The stress change led to the deflection of the propagation direction of lateral cracks.Therefore,the lateral cracks propagated to the workpiece surface,resulting in brittle removal in the form of chunk chips.The plastic deformation parameter indicated that the more the slip systems were activated,the more easily the plastic deformation occurred.The cleavage fracture parameter indicated that the cracks propagated along the activated cleavage planes,and the brittle chunk removal was owing to the subsurface cleavage cracks propagating to the crystal surface.Under the same processing parameters,the scratch of the(001)crystal plane along the[100]crystal-orientation was found to be the most conducive to achieving plastic machining of MgF_(2) single crystals.The theoretical results agreed well with the experimental results,which will not only enhance the understanding of the anisotropy dependence of the damage evolution and removal process during the machining of MgF_(2) crystals,but also provide a theoretical foundation for achieving the high-efficiency and low-damage processing of anisotropic single crystals.
基金the financially support of the National Natural Science Foundation of China(12164051)the Joint Foundation of Provincial Science and Technology Department-Double First-class Construction of Yunnan University(2019FY003016)+4 种基金the Young Top Talent Project of Yunnan Province(YNWR-QNBJ-2018-229)the financially support by Yunnan Major Scientific and Technological Projects(202202AG050016)Advanced Analysis and Measurement Center of Yunnan University for the sample characterization service and the Postgraduate Research and Innovation Foundation of Yunnan University(2021Y036)the financially support of the National Natural Science Foundation of China(62064013)the Application Basic Research Project of Yunnan Province[2019FB130]。
文摘Low-dimensional halide perovskites have become the most promising candidates for X-ray imaging,yet the issues of the poor chemical stability of hybrid halide perovskite,the high poisonousness of lead halides and the relatively low detectivity of the lead-free halide perovskites which seriously restrain its commercialization.Here,we developed a solution inverse temperature crystal growth(ITCG)method to bring-up high quality Cs_(3)Cu_(2)I_(5)crystals with large size of centimeter order,in which the oleic acid(OA)is introduced as an antioxidative ligand to inhibit the oxidation of cuprous ions effieiently,as well as to decelerate the crystallization rate remarkalby.Based on these fine crystals,the vapor deposition technique is empolyed to prepare high quality Cs_(3)Cu_(2)I_(5)films for efficient X-ray imaging.Smooth surface morphology,high light yields and short decay time endow the Cs_(3)Cu_(2)I_(5)films with strong radioluminescence,high resolution(12 lp/mm),low detection limits(53 nGyair/s)and desirable stability.Subsequently,the Cs_(3)Cu_(2)I_(5)films have been applied to the practical radiography which exhibit superior X-ray imaging performance.Our work provides a paradigm to fabricate nonpoisonous and chemically stable inorganic halide perovskite for X-ray imaging.
基金support by the National Natural Science Foundation of China(Grant No.12274477)the Department of Science and Technology of Guangdong Province of China(Grant No.2019QN01X061)。
文摘Using the Lindemann criterion,we analyzed the quantum and thermal melting of electronic/excitonic crystals recently discovered in two-dimensional(2D)semiconductor moirépatterns.We show that the finite 2D screening of the atomically thin material can suppress(enhance)the inter-site Coulomb(dipolar)interaction strength,thus inhibits(facilitates)the formation of the electronic(excitonic)crystal.Meanwhile,a strong enough moiréconfinement is found to be essential for realizing the crystal phase with a wavelength near 10 nm or shorter.From the calculated Lindemann ratio which quantifies the fluctuation of the site displacement,we estimate that the crystal will melt into a liquid above a critical temperature ranging from several tens Kelvin to above 100 K(depending on the system parameters).
文摘In this article Florian Puchtler at affiliation‘University of Bayreuth’,Josef Breu at affiliation‘University of Bayreuth’,and Ziliang Wu at affiliation‘Zhejiang University’was missing from the author Min Cao,Senping Liu,Qingli Zhu,Ya Wang,Jingyu Ma,Zeshen Li,Dan Chang,Enhui Zhu,Xin Ming,Florian Puchtler,Josef Breu,Ziliang Wu,Yingjun Liu,Yanqiu Jiang,Zhen Xu,Chao Gao list.
基金supported by the National Key R&D Program of China(Grant Nos.2022YFA1403400,2022YFA1403800,and 2019YFA0704900)the Fundamental Science Center of the National Natural Science Foundation of China (Grant No.52088101)+5 种基金the Beijing Natural Science Foundation (Grant No.Z190009)the National Natural Science Foundation of China (Grant Nos.11974394,1217442651271038)the Strategic Priority Research Program(B) of the Chinese Academy of Sciences (CAS)(Grant No.XDB33000000)the Key Research Program of CAS(Grant No.ZDRW-CN-2021-3)the Scientific Instrument Developing Project of CAS (Grant No.ZDKYYQ20210003)。
文摘Kagome materials have been studied intensively in condensed matter physics.With rich properties,various Kagome materials emerge during this process.Here,we grew single crystals of Y_(0.5)Fe_(3)Sn_(3)and confirmed an YCo_(6)Ge_(6)-type Kagome-lattice structure by detailed crystal structure characterizations.This compound bears an antiferromagnetic ordering at T_(N)= 551 K,and shows a weak ferromagnetism at low temperatures,where an anomalous Hall effect was observed,suggesting the non-zero Berry curvature.With the unstable antiferromagnetic ground state,our systematic investigations make Y_(0.5)Fe_(3)Sn_(3)a potential Kagome compound for Kagome or topological physics.
基金supported by the Beijing Natural Science Foundation(Grant No.Z190008)the National Key Research and Development Program of China(Grant Nos.2018YFA0305700 and 2021YFA1400200)+6 种基金the National Natural Science Foundation of China(Grant Nos.12025408,11921004,11834016,and 11888101)supported by the National Natural Science Foundation of China(Grant No.12174454)the Strategic Priority Research Program of CAS(Grant No.XDB33000000)CAS Project for Young Scientists in Basic Research(Grant Nos.2022YSBR-047 and 2022YSBR-048)the Users with Excellence Program of Hefei Science Center CAS(Grant No.2021HSCUE008)Guangdong Basic and Applied Basic Research Funds(Grant No.2021B1515120015)Guangdong Provincial Key Laboratory of Magnetoelectric Physics and Devices(Grant No.2022B1212010008)。
文摘The recent report of pressure-induced structural transition and signature of superconductivity with T_(c)≈80 K above 14 GPa in La_(3)Ni_(2)O_(7)crystals has garnered considerable attention.To further elaborate this discovery,we carried out comprehensive resistance measurements on La_(3)Ni_(2)O_(7)crystals grown in an optical-image floating zone furnace under oxygen pressure(15 bar)using a diamond anvil cell(DAC)and cubic anvil cell(CAC),which employ a solid(KBr)and liquid(glycerol)pressure-transmitting medium,respectively.Sample 1 measured in the DAC exhibits a semiconducting-like behavior with large resistance at low pressures and gradually becomes metallic upon compression.At pressures P 13.7 GPa we observed the appearance of a resistance drop of as much as~50%around 70 K,which evolves into a kink-like anomaly at pressures above 40 GPa and shifts to lower temperatures gradually with increasing magnetic field.These observations are consistent with the recent report mentioned above.On the other hand,sample 2 measured in the CAC retains metallic behavior in the investigated pressure range up to 15 GPa.The hump-like anomaly in resistance around~130 K at ambient pressure disappears at P≥2 GPa.In the pressure range of 11–15 GPa we observed the gradual development of a shoulder-like anomaly in resistance at low temperatures,which evolves into a pronounced drop of resistance of 98%below 62 K at 15 GPa,reaching a temperature-independent resistance of 20μΩbelow 20 K.Similarly,this resistance anomaly can be progressively shifted to lower temperatures by applying external magnetic fields,resembling a typical superconducting transition.Measurements on sample 3 in the CAC reproduce the resistance drop at pressures above 10 GPa and realize zero resistance below 10 K at 15 GPa even though an unusual semiconducting-like behavior is retained in the normal state.Based on these results,we constructed a dome-shaped superconducting phase diagram and discuss some issues regarding the sample-dependent behaviors on pressure-induced hightemperature superconductivity in the La_(3)Ni_(2)O_(7)crystals.
基金supported by the National Natural Science Foundation of China(Grant No.12274440)the Strategic Priority Research Program(B)of Chinese Academy of Sciences(Grant No.XDB33010100)National Key R&D Program of China(Grant No.2022YFA1403903)。
文摘Mn_(3)Sn_(2)has been proposed as an ideal material for magnetic refrigeration.It undergoes two successive ferromagnetic transitions(T_(C1)=262 K and T_(C2)=227 K)and one antiferromagnetic transition(TN=192 K).Herein we report,for the first time,the preparation of single crystals of Mn_(3)Sn_(2)from Bi flux.The resultant anisotropic magnetic properties and magnetocaloric effect are investigated along the three principal crystallographic directions of the crystal.Significant anisotropy of magnetic susceptibility and multiple field-induced metamagnetic transitions were found at low fields,whereas the magnetocaloric effect was found to be almost isotropic and larger than that of the polycrystalline one.The maximum magnetic entropy change amounts to-ΔSM=4.01 J·kg^(-1)·K^(-1)near T_(C1)under a magnetic field change of μ_(0)ΔH=5 T along the c-axis,with the corresponding refrigerant capacity of 1750 mJ·cm^(-3).Combined with a much wider cooling temperature span(~80 K),our results demonstrate Mn_(3)Sn_(2)single crystal to be an attractive candidate working material for active magnetic refrigeration at low temperatures.
基金Supported by National Natural Science Foundation of China(Grant Nos.52275227,52130509)Key Basic Research Project of the Foundation Strengthening Plan of China(Grant Nos.2019-JCJQ-JJ-034,2019-JCJQ-ZD-302).
文摘Photonic crystals are periodic structural materials that have an impact on the propagation properties of photons.Due to their excellent optical,electrical and magnetic properties,their advantages and potential for applications in the above areas are gradually emerging.Therefore,an increasing number of researchers have focused on photonic crystals.In this paper,the characteristics of biological photonic crystal structures,such as those found in butterfly wings,sea mouse bristles,peacock feathers,melon jellyfish epidermal cells,and weevil exoskeletons,are described.The preparation methods of photonic crystals are systematically summarized(including the template method,self-assembly technology,electron beam evaporation coating technology,chemical vapor deposition technology,femtosecond laser two-photon technology,spin coating technology,and a variety of technology mixing),and the characteristics,advantages,and disadvantages of the different methods are compared.Furthermore,the development of photonic crystals in the field of sensors,solar cells,filters,and infrared stealth is discussed,demonstrateing the great development potential of photonic crystals.It is concluded that the realization of photonic crystals with high precision,high sensitivity,angle independence,and large-area uniform preparation is a key problem requiring urgent solution.Moreover,photonic crystals have potential development prospects in the fields of equipment stealth,new concept weapons,production,an daily life.
基金the National Natural Science Foundation of China(Grant Nos.61972016 and 62032016)the Beijing Nova Program(Grant No.20220484106)。
文摘We present a novel approach for the prediction of crystal material properties that is distinct from the computationally complex and expensive density functional theory(DFT)-based calculations.Instead,we utilize an attention-based graph neural network that yields high-accuracy predictions.Our approach employs two attention mechanisms that allow for message passing on the crystal graphs,which in turn enable the model to selectively attend to pertinent atoms and their local environments,thereby improving performance.We conduct comprehensive experiments to validate our approach,which demonstrates that our method surpasses existing methods in terms of predictive accuracy.Our results suggest that deep learning,particularly attention-based networks,holds significant promise for predicting crystal material properties,with implications for material discovery and the refined intelligent systems.